I have had really good luck with a plastic ($9.95) 35mm panorama camera for this use, simply unscrew the small phillips screws, open the camera up, and take the entire lens element out, then I use black gaffers tape to tape a pie tin pinhole to the front of the camera. The cameras are "panoramic" so they have a mask in them to "shape" the frames like a real panorama camera, but it is easily snapped out for "full frame" use. Pix Panorama is the "brand" name. I can't remember for sure, but I think they are an Ansco camera.
Have fun, Dan > From: Harold McCarty <mccar...@earthlink.net> > Reply-To: pinhole-discussion@p at ??????? > Date: Thu, 25 Jan 2001 11:23:07 -0500 > To: pinhole-discussion@p at ??????? > Subject: [pinhole-discussion] Re: 35mm pinholes > > >> >> From: "Andrew Ziem" <z...@iex.net> >> To: <pinhole-discussion@p at ???????> >> Date: Wed, 24 Jan 2001 20:08:40 -0700 >> Subject: [pinhole-discussion] 35mm pinholes >> Reply-To: pinhole-discussion@p at ??????? >> >> Can anyone give me advice on building a 35mm pinhole camera, either from >> scratch or from another camera? I have tinkered with a small box, but am not >> mechanically original enough to figure out how to create a spooling >> mechanism for it... > > Andy, drill a hole in a body cap for a working SLR. Put the > pinhole optic in the center. After measuring several models > over the years.... 0.011" is a good size for this. > > Harold > > _______________________________________________ > Pinhole-Discussion mailing list > Pinhole-Discussion@p at ??????? > unsubscribe or change your account at > http://www.p at ???????/discussion/ >