Hi Samir,
Not sure, do you mean SNMP interface ifIndex by iframe index in/out? If
not, please tell me more - it does not ring a bell; if yes, you have it
there populated, 'iface_in' and 'iface_out' fields.
Paolo
On 28/10/2020 19:41, Samir Faci wrote:
I'm using the nfacctd process to capture netflow data. All the routers
are writing to the exposed udp port.
I'm writing the output the rabbit MQ and the output looks like this:
This is an example of the output I'm getting:
|{ "event_type": "purge", "as_src": 0, "as_dst": 0, "as_path": "",
"local_pref": 0, "med": 0, "peer_as_src": 0, "peer_as_dst": 0,
"peer_ip_src": "192.168.32.1", "peer_ip_dst": "", "iface_in": 909,
"iface_out": 517, "ip_src": "87.100.13.241", "ip_dst": "106.89.180.131",
"port_src": 55664, "port_dst": 443, "ip_proto": "tcp",
"timestamp_start": "1574664912.000000", "timestamp_end":
"1574665005.000000", "packets": 700, "bytes": 39200, "writer_id":
"default_amqp/18" } |
For the fields i'm in my config I'm using these so far:
aggregate:
peer_src_ip,label,src_host,dst_host,src_port,dst_port,proto,in_iface,out_iface,src_as,dst_as,peer_dst_ip,timestamp_start,timestamp_end,as_path,peer_src_as,peer_dst_as,local_pref,med
What config key should I enable that allows the iframe index in/out to
be visible?
--
Samir Faci
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists
_______________________________________________
pmacct-discussion mailing list
http://www.pmacct.net/#mailinglists