FENOC does not monitor head separately. Monitor only with hard hat on head.
Sent from my iPhone On Mar 12, 2015, at 6:19 PM, "Clark, Lucius" <lucius.cl...@pseg.com<mailto:lucius.cl...@pseg.com>> wrote: PSEG recently purchased Canberra Argos 5AB whole body contamination monitors. Given that the head detector establishes it's height for both the front and back counts during the initial survey (front count), what practice do you utilize to survey both the top of the head (without hard hat) and the top of the hard hat? If you do not survey hard hats while using the Argos 5AB, what method do you use to survey hard hats? Thanks in advance for your time and feedback. L. Clark Hope Creek Radiation Protection ________________________________ ________________________________ The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation. ----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message.
