On Di, 2017-01-17 at 15:56 +0100, Roland Hieber wrote: > On 17.01.2017 14:22, fixed-term.oleksij.rem...@de.bosch.com wrote: > > From: Oleksij Rempel <li...@rempel-privat.de> > > > > openocd 0.10.0-rc2 > > > > Signed-off-by: Oleksij Rempel <li...@rempel-privat.de> > > --- > > rules/host-openocd.in | 8 ++++++++ > > rules/host-openocd.make | 37 +++++++++++++++++++++++++++++++++++++ > > [...] > > > > Well, that was short and easy :) But I see various enable/disable flags > in the configure help that default to "auto" and are not handled here in > the Makefile. These flags should be included for the build to be > reproducible, or have you checked that they don't depend on the build > order of the system? In any case, it is probably a good idea to include > any configure options in the menu to let the user choose the feature set > (i.e., memory footprint, and additional dependencies, if any).
Back in 2014, I prepared a host package for openocd 0.8.0, which you might use as a template. Essentially the same as the target one (which got included mainline), just in a host variant. The host package was not really needed by anyone (me included), so it did not went in. You can find the threads on the mailinglist resp. there: [ptxdist] [PATCH] openocd: new package for openocd-0.8.0 (host, target) https://www.mail-archive.com/ptxdist@pengutronix.de/msg08936.html [ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0 https://www.mail-archive.com/ptxdist@pengutronix.de/msg08969.html Best regards, Andreas -- carpe noctem engineering Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch Dipl.-Ing. (FH) Andreas Pretzsch Tel. +49-(0)7307-936088-1 Lange Strasse 28a Fax: +49-(0)7307-936088-9 89250 Senden, Germany email: a...@cn-eng.de _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de
