Hi all, I have setup the toolchain with the settings from my previous email (-mcpu=cortex-a7 -mfpu=neon-vfpv4)
When I try to build the Linux kernel I get lots of warnings about conflicting toolchain options: arch/arm/kernel/elf.c:1:0: warning: switch -mcpu=cortex-a7 conflicts with -march=armv5t switch This is with OSELAS.Toolchain-2016.06.1, using arm-v7a-linux-gnueabihf. I am not sure where the -march=armv5t is coming from, since this is an arm-v7a toolchain. Also if I use -mcpu=cortex-a9 instead of cortex-a7, there are no warnings :-? Can anyone sehd some light ? Thank you, Guillermo El lun., 25 nov. 2019 a las 13:33, Guillermo Rodriguez Garcia (<guille.rodrig...@gmail.com>) escribió: > > Hi all, > > I am trying to setup a toolchain for the STM32MP15x. The main CPU is a > single or dual (depending on p/n) Cortex-A7, supporting NEON and > VFPv4. > > I'm using the OSELAS arm-v7a-linux-gnueabihf toolchain. As for the > extra flags I believe I should use -mcpu=cortex-a7 -mfpu=neon-vfpv4. > > Does this look correct? Any comments / hints? > > BR, > > Guillermo Rodriguez Garcia > guille.rodrig...@gmail.com -- Guillermo Rodriguez Garcia guille.rodrig...@gmail.com _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de