Hi David,
Maybe I should be a bit more specific:
=====================================================
Multimedia devices --->
<M|*> Video for Linux
(I would also suggest )
[*] V4L information in proc filesystem
USB Support --->
--- USB Multimedia devices
<M|*> USB Philips Cameras
=====================================================
Also, I'm not sure if you're using the stock TS kernel or what, but in
order to access anything USB you have to insert a few modules ahead of
time (note: for usb storage, add scsi_mod sd_mod usb-storage to the end
of the list).
for i in usbcore pcipool usb-ohci \
usb-ohci-ep93xx v4l pwc ; do \
insmod $i;
done
Then, I would mount the usbfs
mount -t proc proc /proc (if not already mounted)
mount -t usbfs usbfs /proc/bus/usb
Let me know if you have any problems. I've found that just building all
of the above mentioned modules into the kernel greatly reduces the size
of modules on the filesystem. Not only that, but TS' kernel / busybox's
insmod are somehow strictly versioned. I would suggest instead just
building everything in to the kernel and burn it into flash at 0x4000 to
avoid size / versioning problems later.
~/Chris
David Topper wrote:
> Hi all,
>
> Yes, I should upgrade all my kernels ... but I don't have time at the
> moment. Deadline approaching. So I'm hoping I can find a way to get
> this driver to compile on both my laptop and TS-7200 SBC.
>
> In any case, when I try to compile the module currently, I get the
> following error:
>
> make -C /home/src/pwc-10.0.11 CFLAGS="-D__KERNEL__
> -I/usr/src/linux-2.4.22/include -Wall -Wstrict-prototypes -Wno-trigraphs
> -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe
> -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include
> /usr/src/linux-2.4.22/include/linux/modversions.h" MAKING_MODULES=1 modules
> make[2]: Entering directory `/home/src/pwc-10.0.11'
> make[2]: *** No rule to make target `modules'. Stop.
> make[2]: Leaving directory `/home/src/pwc-10.0.11'
> make[1]: *** [_mod_/home/src/pwc-10.0.11] Error 2
> make[1]: Leaving directory `/usr/src/linux-2.4.22'
> make: *** [all] Error 2
>
> and if I comment out the "modules" directive from the makefile, I get
> other errors (eg., from make install):
>
> make[1]: Leaving directory `/usr/src/linux-2.4.22'
> install -d /lib/modules/2.4.22/kernel/drivers/usb/media
> install -m 644 -c pwc.ko /lib/modules/2.4.22/kernel/drivers/usb/media
> install: cannot stat `pwc.ko': No such file or directory
> make: *** [install] Error 1
>
> Thanks,
>
> DT
>
_______________________________________________
pwc mailing list
[email protected]
http://lists.saillard.org/mailman/listinfo/pwc
