Thanks for your response. I do have the 32 bit version installed. The problem is that the instructions in the wiki (http://wiki.tiker.net/PyCuda/Installation/Mac/EnthoughtPython) are not working for me! What might I be missing? I have the latest version of everything installed.
Thanks, Andres Andrés González Mancera, Ph.D. Profesor Asistente Departamento de Ingeniería Mecánica Universidad de los Andes Cra. 1 Este No. 19A-40 ML 625 Bogotá - Colombia + (571) 3394949 ext. 2915 angon...@uniandes.edu.co 2010/7/19 Per B. Sederberg <psederb...@gmail.com>: > At Mon, 19 Jul 2010 10:14:44 -0500, > Andrés Leonardo González Mancera wrote: >> >> I'm still trying to install boost on my Mac Pro. The process has >> proved to be daunting. >> >> What I find strange is that the instructions in >> http://wiki.tiker.net/PyCuda/Installation/Mac/EnthoughtPython seem to >> have work for people with my exact same setup. My concrete question is >> if the instruction in the wiki are using EPD 64 bits, or should the 32 >> bit version work? >> > > I successfully installed with the 32-bit EPD. I think the 64-bit > version costs money, making it a bit more prohibitive. > > Best, > Per > > >> Thanks in advance for your help, >> >> Andres >> >> >> Andrés González Mancera, Ph.D. >> Profesor Asistente >> Departamento de Ingeniería Mecánica >> Universidad de los Andes >> Cra. 1 Este No. 19A-40 ML 625 >> Bogotá - Colombia >> + (571) 3394949 ext. 2915 >> angon...@uniandes.edu.co >> >> >> > Date: Fri, 16 Jul 2010 13:01:45 -0400 >> > From: gerald wrong <psillymathh...@gmail.com> >> > To: pycuda@tiker.net >> > Subject: Re: [PyCUDA] PyCUDA Digest, Vol 25, Issue 9 >> > Message-ID: >> > <aanlktimxikdngqbkbgpf4iabftissyg33y3sf3_9o...@mail.gmail.com> >> > Content-Type: text/plain; charset="iso-8859-1" >> > >> > Yes, I have been full fisted battling with PyCUDA on the macbook pro. >> > >> > Use macports python2.6 +universal, and macports boost +universal. You will >> > need to compile as universal because some of the software is 32bit (CUDA if >> > I remember). >> > >> > This will get you very very close. Right now I am running into some >> > incompatible architecture errors regarding mach-o . When I have a chance I >> > will post some tips if easily resolved... but I am recovering from some >> > travels today. >> > >> > Regardless I am planning to make a macport of PyCUDA soon(if no one beats >> > me :), so that users of my own projects will not require hours-days of >> > hacking to get a PyCUDA to work on a Mac. PyCUDA is very useful so I >> > was surprised Mac masters have not ported it. >> > >> > I think macports is the direction to go. Perhaps a mac master can work >> > through the architecture errors that occur... and assemble a portfile... >> > else I will do so when I recover. >> > >> > Please let me know if you reach success! >> > >> > ~Garrett >> > garrett dot wright at temple dot edu >> > >> >> Date: Thu, 15 Jul 2010 21:31:29 -0500 >> >> From: Andr?s Leonardo Gonz?lez Mancera <angon...@uniandes.edu.co> >> >> To: pycuda@tiker.net >> >> Subject: [PyCUDA] Problem installing boost in Snow Leopard and EPD >> >> Message-ID: >> >> <aanlktilscwzxa_sv0lcnwnynvqdwdpur4fp0luipn...@mail.gmail.com> >> >> Content-Type: text/plain; charset=UTF-8 >> >> >> >> Hello all, >> >> >> >> I've been trying to install PyCUDA in a mac pro running the latest >> >> version of Snow Leopard, Xcode and EPD (32 bits version). I have >> >> installed cuda driver, toolkit and sdk version 3.1 and verified the >> >> installation with the included tests. >> >> >> >> I haven't been able to succesfully install boost. I'm following the >> >> specific instructions for installing on Snow Leopard and EPD available >> >> on the wiki. I keep getting an error saying that 1 target failed and >> >> libboost_python is not getting installed. The only way I was able to >> >> get the python library installed was by using address-model=32 instead >> >> of the recommended address-model=32_64. Are the instructions on the >> >> wiki using EPD 64 bits version? I have tried boost 1.42 and 1.42 with >> >> the same results. >> >> >> >> Is anyone else having this same problem? It seem to me that the >> >> solution on the wiki resolved the problem of installing boost with my >> >> particular setup. Any suggestions? Are there any drawback on using the >> >> 32 bits only version of boost with cuda 3.1? >> >> >> >> Thanks in advance for any suggestions. >> >> >> >> Andres >> >> >> >> ---------- >> >> Andr?s Gonz?lez Mancera, Ph.D. >> >> Profesor Asistente >> >> Departamento de Ingenier?a Mec?nica >> >> Universidad de los Andes >> >> Cra. 1 Este No. 19A-40 ML 625 >> >> Bogot? - Colombia >> >> + (571) 3394949 ext. 2915 >> >> angon...@uniandes.edu.co >> >> >> >> _______________________________________________ >> PyCUDA mailing list >> PyCUDA@tiker.net >> http://lists.tiker.net/listinfo/pycuda > _______________________________________________ PyCUDA mailing list PyCUDA@tiker.net http://lists.tiker.net/listinfo/pycuda
