This patch adds support for AHCI emulation. I have tested and verified it works in Linux, OpenBSD, Windows Vista and Windows 7. This AHCI emulation supports NCQ, so multiple read or write requests can be outstanding at the same time.
The code is however not fully optimized yet. I'm fairly sure that there are low hanging performance fruits to be found still :). In my simple benchmarks I achieved about 2/3rd of virtio performance. Also, this AHCI emulation layer does not support legacy mode. So if you're using a disk with this emulation, you do not get it exposed using the legacy IDE interfaces. Another nitpick is CD-ROM support in Windows. Somehow it doesn't detect a CD-ROM drive attached to AHCI. At least it doesn't list it. To attach an AHCI disk to your VM, please use -drive id=disk,file=...,if=none -device ahci,id=ahci \ -device ide-drive,drive=disk,bus=ahci.0 This patch set is based on work done during the Google Summer of Code. I was mentoring a student, Roland Elek, who wrote most of the AHCI emulation code based on a patch from Chong Qiao. A bunch of other people were also involved, so everybody who I didn't mention - thanks a lot! git://repo.or.cz/qemu/ahci.git ahci v1 -> v2: - rename IDEExtender to IDEBusOps and make a pointer (kraxel) - make dma hooks explicit by putting them into ops struct (stefanha) - use qdev buses (kraxel) - minor cleanups - dprintf overhaul - add reset function v2 -> v3: - add msi support (kraxel) - use MIN macro (kraxel) - add msi support (kraxel) - fix ncq with multiple ports - zap qdev properties (kraxel) - redesign legacy IF_SATA hooks (kraxel) - don't build ahci as part of target - move to ide/ (kwolf) v3 -> v4: - prepare for endianness safety - add lspci dump (herbszt) - use ich7 instead of ich7m (herbszt) - fix lst+fis mapping (kraxel) - coding style (blue swirl) - explicit mmio setters/getters (blue swirl) - split pata code out to pata.c (kwolf) - only include config-devices.h in machine description (blue swirl) v4 -> v5: - s/H2dNcqFis/NCQFrame/g (blue swirl) - redo -drive magic (blue swirl) - bump BAR to 4k - rename ICH7_AHCI to ICH7_AHCI_RAID (herbszt) - drop device config header (blue swirl) v5 -> v6: - PCI config space fixes (isaku) - remove CONFIG_AHCI from x86 default configs (paul brook) - use snprintf (blue swirl) - add generic PCI config file (paul brook) - build ahci on all PCI platforms (paul brook) v6 -> v7: - use bus instead of opaque (stefanha) - change naming in IDEBusOps (stefanha, kwolf) - rename IDEBusOps (stefanha) - improve interrupt injection - combine tfdata code paths - update tfdata more often - reset port registers on port reset - improve debug output - add "feature" variable from fis for some extended commands - always set feature to DMA for atapi - osx 10.5.0 works as of this version - use non-raid ich7 ahci (herbszt) - reflect normal ich7 in pci dump - stick to new IDEBusOps (stefanha, kwolf) - stefan's ahci comments v7 -> v8: - rewrite ops as DMA offsplit framework - split bmdma stuff out to pci.c - generate tfdata on the fly - reimplement immediate dma rw - add safety net for busy engine - adjust ahci code for new DMA framework - move ide core+pci to pci.mak - add sebastian's config space patches v8 -> v9: - make dma providers subclass of idedma (kwolf) - s/set_status/add_status/g (kwolf) - cancel and clear ncq queue on reset (stefanha) - clear ptr on map failure (stefanha) - potential NULL deref, unregister reset (stefanha) - add error reporting for ncq (stefanha) - replace hw_error with DPRINTF (stefanha) - move sg generation to sg users - fix off-by-one in sglist interpretation - make background engine work (queued commands) - use ICH9 instead of ICH7 (aliguori) - update to new APIs Alexander Graf (9): ide: split ide command interpretation off ide: fix whitespace gap in ide_exec_cmd ide: Split out BMDMA code from ATA core ide: move transfer_start after variable modification pci: add storage class for sata pci: add ich9 pci id ahci: add ahci emulation config: move ide core and pci to pci.mak config: add ahci for pci capable machines Roland Elek (1): ide: add ncq identify data for ahci sata drives Sebastian Herbszt (1): ahci: set SATA Mode Select Makefile.objs | 1 + default-configs/arm-softmmu.mak | 1 - default-configs/i386-softmmu.mak | 3 - default-configs/mips-softmmu.mak | 3 - default-configs/mips64-softmmu.mak | 3 - default-configs/mips64el-softmmu.mak | 3 - default-configs/mipsel-softmmu.mak | 3 - default-configs/pci.mak | 4 + default-configs/ppc-softmmu.mak | 3 - default-configs/ppc64-softmmu.mak | 3 - default-configs/ppcemb-softmmu.mak | 3 - default-configs/sh4-softmmu.mak | 1 - default-configs/sh4eb-softmmu.mak | 1 - default-configs/sparc64-softmmu.mak | 3 - default-configs/x86_64-softmmu.mak | 3 - hw/ide/ahci.c | 1527 ++++++++++++++++++++++++++++++++++ hw/ide/cmd646.c | 7 +- hw/ide/core.c | 1098 +++++++++++-------------- hw/ide/internal.h | 73 +- hw/ide/pci.c | 289 +++++++- hw/ide/pci.h | 30 + hw/ide/piix.c | 7 +- hw/ide/via.c | 7 +- hw/pci.h | 1 + hw/pci_ids.h | 1 + 25 files changed, 2373 insertions(+), 705 deletions(-) create mode 100644 hw/ide/ahci.c