Ooops :) Thanks that was it , I had a old sernet configuration in my boot file ..
/Michael Grunditz > On 31 Mar 2006 at 22:46, Michael Grunditz wrote: >> > I can change the baud rate for port 1, but it still gives me "File or >> > device in use" in qtpi. > OK, but ser 1 is definitely the port to use. > Try to find out whether anything else has opened a channel to ser 1. > If you have QPAC 2, this is easily done with the "channels" menu. > If not, remove all other jobs, check your boot file and also check the > QPTI settings - here I can use it without having any error (smsqe 3.12). > Wolfgang > ---------------------------------------- > www.scp-paulet-lenerz.com > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm > _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
