At 07:05 μμ 17/4/2002, Hohn Impellizzeri wrote: ><snip> >It's been awhile and I'd have to haul out an old QL and a 'scope to verify >it but I think the composite signal had all the components it was just >output at the wrong levels and most monitors can't tolerate the signal being >that far out of spec. Can you get a color display using a television set >connected to the RF modulator? If so you might have better luck connecting >a composite monitor to the composite input pin on the modulator and >disconnecting the modulator if you don't use it. I seem to recall the >signal was a little closer to "proper" here than it was at the DIN-8 jack on >the back.
That was my second choice. That was the solution I used with my Spectrum too... Just trying to avoid it for now... Anyway the QL will not be in it's proper case for long as once I am done copying the microdrive cartridges, I will remove the board and replace it with SGC/QubIDE/Aurora Phoebus
