Scott, Thanks for your response and insight.
I call what I'm seeing - "Not coloring within the lines" :) When using pch 19, 20, or 21, it looks like the fill does no stay within the perimeter of the circle or properly fill the circle, i.e. some blank area left. It is demonstrated at the following Nabble post location: http://n2.nabble.com/Unusual-Plotting-Artifacts-td3437365.html I guess I would like to use a device that does not have this issue and also provides image that look well electronically in Word and also print well. They need to look good when importing because most of the reviews will be conducted electronically in Word, and it needs to look good when printed because one or two folks will review a hard copy. You mentioned that EPS has a weakness because Word shows a low resolution version. Is there another device that gets around this problem? At this point filesize is not an issue. Thank you again for all your help and feedback. --- On Thu, 8/13/09, Gavin Simpson <gavin.simp...@ucl.ac.uk> wrote: > From: Gavin Simpson <gavin.simp...@ucl.ac.uk> > Subject: Re: [R] Another Plotting Hint - changing fill color for points > To: "Scott Sherrill-Mix" <shesc...@mail.med.upenn.edu> > Cc: "Jason Rupert" <jasonkrup...@yahoo.com>, r-help@r-project.org > Date: Thursday, August 13, 2009, 3:41 AM > On Wed, 2009-08-12 at 23:36 -0400, > Scott Sherrill-Mix wrote: > > I don't really use Word or .wmf but maybe try a high > pixel count .png e.g. > > png('test.png',height=480*5,width=480*5,res=72*5) > > plot(1:10, col = "red", bg = "grey", pch=21, cex > =1.7) > > dev.off() > > > > > > Scott > > An EPS is likely to give better resolution if the document > is intended > to be printed. An EPS image will likely also have a much > smaller file > size, if that is important. > > One problem with EPS files in Word is that, at least in the > versions I > have used (up to Office 11), Word displays a low resolution > preview of > the image on screen, so it doesn't look quite so good on > screen, but > printing is fine. > > Jason, did you print your document containing the wmf? What > you might be > seeing could just be the effects of antialiasing or some > other > processing going on to display the image in Word on screen > and not be > present in the printed version. > > To get an eps, use postscript() with 'paper' and 'onefile' > set > appropriately > > eps('test.eps' height = 6, width = 7, pointsize = 10, > paper = "special", onefile = FALSE) > ## plotting > dev.off() > > HTH > > G > > > > > Scott Sherrill-Mix > > Department of Microbiology > > University of Pennsylvania > > 402B Johnson Pavilion > > 3610 Hamilton Walk > > Philadelphia, PA 19104-6076 > > > > > > > > On Wed, Aug 12, 2009 at 6:17 PM, Jason Rupert<jasonkrup...@yahoo.com> > wrote: > > > This worked great. > > > > > > > > > Regarding the second question - can you expound a > bit more on the effect of the device? Right now, as > shown by the test code because I am on a Windows machine and > need to import the image to Word I am using WMF. Is > there a better device that I should use that will help with > the presolution of the points that are drawn? For > example, I can see white pixesl on the blue circles, and > notice that is not a perfect circle. Thanks for any > information about a better way to go: > > > > > > > win.metafile(file=as.character(figure_file_name_and_path), > pointsize = 10) > > > plot(-4:4, -4:4, type = "n")# setting up coord. > system > > > points(vals_201, vals_200, col = "red", bg = > "grey", pch=21, cex =1..7) > > > #points(vals_201, vals_200, col = "grey", bg = > "white", pch=21, cex =1.5) > > > points(rnorm(100)/2, rnorm(100)/2, col = "blue", > bg = "blue", pch=21, cex =1.5) > > > dev.off() > > > > > > > > > Thanks again. > > > > > > --- On Wed, 8/12/09, Sarah Goslee <sarah.gos...@gmail.com> > wrote: > > > > > >> From: Sarah Goslee <sarah.gos...@gmail.com> > > >> Subject: Re: [R] Another Plotting Hint - > changing fill color for points > > >> To: "Jason Rupert" <jasonkrup...@yahoo.com>, > "r-help" <r-help@r-project.org> > > >> Date: Wednesday, August 12, 2009, 4:56 PM > > >> Yes, you can do that. You need to > > >> specify pch in the range of 21-25, > > >> and can then > > >> specify both col and bg (background color). > Oddly, the help > > >> for this option is > > >> under ?points rather than ?par or ?pch, but > there are many > > >> examples. > > >> > > >> Your second question would depend heavily on > the device you > > >> use and its > > >> associated settings, but using the above > solution should > > >> solve your problem. > > >> > > >> Sarah > > >> > > >> On Wed, Aug 12, 2009 at 5:29 PM, Jason > Rupert<jasonkrup...@yahoo.com> > > >> wrote: > > >> > > > >> > Is it possible to change the fill color > of a point? > > >> For example, the outer color being > "Blue" and inner color > > >> being "Grey". > > >> > I've tried changing "col" and "bg", but > that does not > > >> seem to have the desired effect. > > >> > > > >> > Below is another attempt, but the pixel > resolution of > > >> the points function does not appear to be > high enough for > > >> this to work: > > >> > > > >> > > figure_file_name_and_path<-paste("Test.wmf", > > >> sep="") > > >> > > > >> > vals_200<-rnorm(200) > > >> > vals_201<-rnorm(200) > > >> > > > >> > > > >> > win.metafile(file=as.character(figure_file_name_and_path), > > >> pointsize = 10) > > >> > plot(-4:4, -4:4, type = "n")# setting up > coord. > > >> system > > >> > points(vals_201, vals_200, col = "blue", > bg = "white", > > >> pch=19, cex =1.7) > > >> > points(vals_201, vals_200, col = "grey", > bg = "white", > > >> pch=19, cex =1.5) > > >> > points(rnorm(100)/2, rnorm(100)/2, col = > "blue", bg = > > >> "white", pch=19, cex =1.5) > > >> > dev.off() > > >> > > > >> > As a second question, is there any way > to increase the > > >> pixel resolution of the points produced on > the plot so that > > >> they are perfect circles. I just > noticed that the fill > > >> does not perfectly fill the points on the > plot and there are > > >> some pixels outside the circle. > > >> > > > >> > Thanks again. > > >> > > > >> > > >> > > >> -- > > >> Sarah Goslee > > >> http://www.functionaldiversity.org > > >> > > > > > > > > > > > > > > > ______________________________________________ > > > R-help@r-project.org > mailing list > > > https://stat.ethz.ch/mailman/listinfo/r-help > > > PLEASE do read the posting guide > > > http://www.R-project.org/posting-guide.html > > > and provide commented, minimal, self-contained, > reproducible code. > > > > > > > ______________________________________________ > > R-help@r-project.org > mailing list > > https://stat.ethz.ch/mailman/listinfo/r-help > > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > > and provide commented, minimal, self-contained, > reproducible code. > -- > %~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~% > Dr. Gavin Simpson > [t] +44 (0)20 7679 0522 > ECRC, UCL Geography, [f] > +44 (0)20 7679 0565 > Pearson Building, > [e] gavin.simpsonATNOSPAMucl.ac.uk > Gower Street, London [w] > http://www.ucl.ac.uk/~ucfagls/ > UK. WC1E 6BT. > [w] http://www.freshwaters.org.uk > %~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~%~% > > > ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
