Component parts become unavailable, the engineering to make backward
compatibles, the liability, and time spent in support can make a company
unprofitable. Often the secondary market will step up if there is enough
demand.
This is nothing new BTW. You have to be in business to do business.
Shareholders insist on it!
. 02
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
On 2023-05-11 5:10 am, frenergy via RE-wrenches wrote:
Michael,
That's rather dis-heartening if boards are no longer available for a 10
year old product. Got a long day out of town today but will ruminate
on responses.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
On 5/10/2023 6:48 PM, Michael Morningstar via RE-wrenches wrote:
I just pulled out an 8048 and replaced it with a 8048A due to the lack
of AC boards for 8048s. I didn't know any better and put in a new 8048A
board and learned the hard way that they aren't cross compatible.
Smoked it. If you think you can find a board for it, it's yours.
On Wed, May 10, 2023 at 11:06 AM Darryl Thayer via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote:
Sorry if this is nonsense, but your existing Radian is your "AC grid
source," It can act as the paralleling.
AC coupling source. I did this about 20 to 30 years ago, using FX
inverters, not Radians, to power a large motor.
Can your Radian Mate 3 run in grid zero? Or if not, one inverter runs
all the time as a grid source ( grid forming)
the second inverter (grid following) runs in Grid-Zero mode, with
"off-set" set at 30 Amps. If the load is less than 30 amps,
the grid-following inverter carries the load. (The grid-forming
inverter supplies the grid signal, and the following inverter
carries the load.) When your load exceeds 30 amps, the extra current
comes from the grid-forming inverter. The Radian can
pass up to 50 or 60 amps from the forming inverter. You can get 50 to
60 amps
to the load when you add the forming and following inverters. Errors:
this will double your parasitic load, I have not done this
so beware. This is not the answer for V2H; other inverters can work in
this combination but
On Wed, May 10, 2023 at 10:04 AM frenergy via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote: The wrench list has
some very creative thinkers that may have a
go around to be able to master/slave an old Radian's output with a new
one. Outback says this is not do-able. We're completely off-grid
out
here and have been charging EVs (one at a time) with an eleven year old
Radian (GS8048) for years but the Ford Lightning is on its way.
Outback
says I can't add the newer GS8048A to exiting version (no "A").
Ideas??
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA 95983
530.284.1925 Office/ 530.258.1641 Cell
CA Lic 874049
Solar powered since 1982
--
Michael Morningstar
Morningstar Electric
PO Box 1494
Mount Shasta, CA 96067
530-921-0560
mjmornings...@gmail.com
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
[1]
Virus-free.www.avast.com [1]
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
Links:
------
[1]
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org