Several years back, I got involved with a couple of repeaters using the MCC controllers. They just did strange, unexplainable things. The owners of the repeaters eventually grew tired of the problems and replaced the controllers with either S-Com or Link controllers. These repeaters now run with no controller issues and have done so for a long time.
Not necessarily the "fix" you wanted to hear, but it solved the problems. Chuck WB2EDV ----- Original Message ----- From: "Robert W Burton" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, November 14, 2004 4:45 PM Subject: [Repeater-Builder] Repeater Audio not passing > > This is a problem that has plaqued me now for months...and I can't seem > to find out what the problem is. I have a Micro Computer Concepts > converted GE Mastr Exec II UHF repeater the built in RC100 controller. I > also have a TM-G707 as a remote base. The problem I have is that > sometimes the "repeated" audio disappears, but the audio will still pass > thru the remote base port. This may go on for just hours or days....but > the "repeated" audio will come back. I can go and cycle the power on and > off...and it fixes it, for awhile. > > I have cleaned connections, I have changed out the exciter, I have > changed out the op. amp chip on the controller. > > I have NOT changed out C4 nor R9, which is in that line (with the except > it also ties into the remote base tx line...that is not having problems). > I have also not changed out the op amp on the drop in board that MCC put > in. It seems to control the custon front volume and squelch panel...but > I am not sure if that would be the problem. > > I have a 800mhz trunked antenna that got put REAL close to the repeater > antenna. If that causes it to blank out, I don't know (also have a LARGE > DCI intermod filter)...but what componet would be going bad? > > Ideas? > Thanks, > Robert > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/