|
Hi All,
I recently acquired a Tait T-300 VHF repeater unit. Looking at using it in
one of our repeater installations.
Got everything working, and appeared to be putting out all the correct
levels, power etc.
However, after a few days, I was advised that the audio seemed to be low on
the out put.
I went up to the site and checked the audio going into the
controller(RLC-3), and this seemed okay. Did not have a deviation meter, so was
not able to check the output level, but by ear it sounded okay. Anyway it was
still low.
Brought the modules down, and opened the modules. This is when I found out
that inside the filter had the markings "21F 7.5 D H", which I worked out to be
21.4 IF, and 7.5 deviation.
I would like to know if I can somehow make it, so it can be used as one of
our ham repeaters? If so, what do I have to do to make this work as
needed?
And any other info that might be of help?
Regards and Thanks
Kevin. ZL1KFM.
Yahoo! Groups Links
|
