At 6/11/2005 01:35 PM, you wrote: >I thought that would work, even tried the locked band but that did not >work. So I decided I am just going to get some squelch circuits and use >them. If I had more time I would build them, but time for me is very >little and when I start if I don't finish and I come back, I forget where >I am at. 96 hours a week at two jobs and 7 kids does not allow much time >for play, hihi. It's been a number of years since I have built anything >on a circuit board, and most of what I had learned has been lost due to a >disease called CRS. So if anyone has 4 squelch circuits lying around and >can make the cost cheaper than the NHRC units, I'd be interested so long >as they can give me the 8 volts that I need.
I assume you can get discriminator audio from both bands separately (speaker audio won't properly drive a squelch circuit. http://linkcomm.com/controllers/accessories/rlcmot/rlc-mot.htm Expensive, but the simplest, least time-intensive solution I can think of. Bob NO6B Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/