Richard, Did they enlarge the drawings large enough that you could read them? I have four different PDF files that another Ham sent me, they seem to be military issue but pretty good quality. What files did you get yours from.
Thanks, Paul -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Richard Sent: Wednesday, June 22, 2005 7:29 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] OT-IFR 1100 Info? I have a .pdf copy of the operating manual for my IFR, and I had it printed through Kinko's. It cost somewhere in the neighborhood of $20. Richard, N7TGB -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Paul Finch Sent: Wednesday, June 22, 2005 8:28 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] OT-IFR 1100 Info? Joe, I found that site, the manual is only a calibration manual, it will help but is not really what I need. I have the manual on CD, the purest in me wants a hard copy. Thanks, Paul -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Joe Sent: Wednesday, June 22, 2005 5:06 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] OT-IFR 1100 Info? Or try: http://www.fullnet.com/u/tomg/manuals.htm There is a manual listed there for sale. 73, Joe, K1ike ---- Glenn Little WB4UIV <[EMAIL PROTECTED]> wrote: > Paul, > > You might try <[EMAIL PROTECTED]> > > This is the test equipment reflector that I found. > > 73 > Glenn > WB4UIV > > > At 11:20 AM 06/21/05, you wrote: > >Hello, > > > >I know this is a bit off topic but I need a service manual for a IFR 1100 > >S, > >is there any message groups out there that may be able to help? Looked > >all > >over Yahoo and nada.... > > > >Thanks, > >Paul > > > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
