Wanna hear what some co's doing ? plastic cans :(
Mark A. Holman AB8RU ARRL Life Member
[EMAIL PROTECTED]
----- Original Message -----
From: "Dave VanHorn" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>; <Repeater-Builder@yahoogroups.com>
Sent: Friday, July 22, 2005 2:34 PM
Subject: Re: [Repeater-Builder] Still after
> At 01:21 PM 7/22/2005, Kris Kirby wrote:
>>On Fri, 22 Jul 2005, Jeff Condit wrote:
>> > Standard coffee cans solder together pretty easily because of the tin
>> > plating they usually used, provided you have a soldering iron with a
>> > good sized copper tip. A few of them started being plastic coated and
>> > these didn't solder well at all.
>>
>>Is there an observed effect on the quality of the duplexer from the
>>surface discontinuties? Would it be worth copper plating? Can it be copper
>>plated?
>
> I'd be very worried about stability, given the overall cheesiness of
> the materials.
>
> Copper pipe is probably workable, though expensive.
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
