I agree. There is not very good lateral strength in a ladder because there is no diagonal bracing like most towers have. You need to think "triangles." If it creates a triangle, in all planes, it's going to have strength. The old "Dill" towers with horizontal "steps" had no sideways strength. Today's Rohn has "Z" braces to form triangles.
Chuck WB2EDV ----- Original Message ----- From: "Coy Hilton" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, August 21, 2005 3:10 PM Subject: [Repeater-Builder] Re: Aluminium ladders as towers > --- In [EMAIL PROTECTED], "Coy Hilton" <[EMAIL PROTECTED]> wrote: > One addition, this is a single aluminum ladder. > > > > Well, This was shown in the 2000 ARRL hand book...sorry to say. This > is a single aluminum ladder. It > works fine for field day operation the photo shows an exstention > ladder guyed at three points sitting in a hole dug about a foot deep > to keep it from walking off in the wind. I can see this being done for > a temperary setup but to use it as a commertial installation is > shurely dangerous. > Good luck Ian > AC0Y >> > >> --- In [EMAIL PROTECTED], Ian Wells <[EMAIL PROTECTED]> > wrote: >> > Hi guys .I have heard of a communication business here in australia >> > useing ladders as towers .anyone tried this or know of any webpages >> > They must either join two together with braces or four of to form a >> > square which forms a free standing tower >> > >> > Thank you >> > Ian Wells >> > Kerinvale Comaudio >> > mail service 1017, >> > Biloela,4715. >> > www.kerinvalecomaudio.com.au >> > >> > >> > >> > >> > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/