Nate, the RC-1000 is programmed by opening the controller for
programming input by sending two code sequences. The unlock sequence
has a 'D' prefix hard wired and can't be changed as I recall, with two
additional characters. A typical sequence would be something like 'D7B'
and D7C'. The unlock sequence should have been changed from the
default sequence as it came from the manufacturer.
When programming is completed, the controller is locked again with one
more D sequence.
Programming is pretty straightforward once you understand what is
happening. Issuing the two separate unlock codes in the proper sequence
is part of the programming security.
Once the controller is unlocked, you issue the four digit sequence for a
particular function along with the code you wish to use for that
function. Note that some codes have a dedicated prefix that you can't
change. You do not use the dedicated prefix when programming the function.
If you need to download the manual, Google MCC computing and you will
find it on line.
73 - Jim [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
