Hi RAY,
I would suggest the ICOM CY repeater as this is the same setup I installed in 
the command trailer for Montgomery Co Search & Rescue in TX.
It is similar to the Mot unit but is made up of 2 mobile units so if you have a 
problem with 1, just that 1 could be swapped out.
This unit does have a power supply for 110v if available and also a connection 
for 12v backup.
The Mot 1225 unit has some problems with the PA if used in high use mode when 
it gets hot.
Mike 
  ----- Original Message ----- 
  From: skydiver297 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Sunday, September 07, 2008 5:19 PM
  Subject: [Repeater-Builder] newbie needs help


  I have been tasked with researching what is needed for a non profit 
  organization that is involved in Wilderness Search and Rescue within 
  our County.

  Right now, we have a frequency of 155.1 but have not yet applied for 
  a second freq. It will have to be in the Public Safety Range for VHF.

  We are looking to outfit a Mobile Command unit and need a 50 watt 
  repeater that will work inside a mobile command without having to run 
  a huge generator just to run the repeater. 

  Ideally, we would get a Duplexer as we don't usually have room to 
  place 2 antennas.

  We are kind of looking at the Motorola GR1225 repeater but would like 
  to get opinions on this radio and any others that you can suggest.

  Is a 16 channel unit overkill for what we need?

  Thanks
  Ray



   

Reply via email to