Randy, The center contacts for N connectors are not standardized, but are unique to each manufacturer. Although the pin and socket dimensions and mating surfaces must meet MIL-Spec drawing specifications in order to maintain constant impedance when mated with other maker's products, the location of positioning ribs and crimp surfaces vary among manufacturers. Some manufacturers, like Amphenol, Kings, Delta, and RF Industries, do offer the contacts and ferrules separately to OEMs, but these items are often not listed in the end-user catalogs. Contact the manufacturer of your connectors for such parts.
73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Randy Brumback Sent: Wednesday, October 22, 2008 7:11 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] N connector parts? Does anyone anywhere sell just the male pin and female pin for N connectors? I have many good cases but because of arching I can't use the pins. Randy W4CPT