Tip to tip of the element.
----- Original Message ----- From: "neal Newman" <cozy...@yahoo.com> To: <Repeater-Builder@yahoogroups.com> Sent: Saturday, February 07, 2009 6:34 PM Subject: Re: [Repeater-Builder] Decibel folded dipole > > Question is that the Length Before the Element is Bent? or is that already > bent measurinf from Tip to tip? > > > --- On Sat, 2/7/09, Chuck Kelsey <wb2...@roadrunner.com> wrote: > >> From: Chuck Kelsey <wb2...@roadrunner.com> >> Subject: Re: [Repeater-Builder] Decibel folded dipole >> To: Repeater-Builder@yahoogroups.com >> Date: Saturday, February 7, 2009, 6:23 PM >> The overall length of one element for 450-470 MHz should be >> about 11-3/16" >> >> The overall length of one element for 406-420 MHz should be >> about 12-1/2" >> >> Chuck >> WB2EDV >> >> >> ----- Original Message ----- >> From: "mike" <m...@verizon.net> >> To: <Repeater-Builder@yahoogroups.com> >> Sent: Saturday, February 07, 2009 6:00 PM >> Subject: [Repeater-Builder] Decibel folded dipole >> >> >> > Hi all >> > I am looking for someone that may have modified a >> Decibel four bay >> > folded dipole antenna to operate in the UHF hamband. >> I'm not sure if >> > the one I have is 450-470 or the lower UHF 420 type >> there is no tag on >> > this one. >> > Thanks in advance >> > Mike >> > >> >> >> ------------------------------------ >> >> >> >> Yahoo! Groups Links >> >> >> > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >