true story circa 1981

Illinois Power Company vehicle

these had the Motorola's with 'Quik-Call' hooked to horn and lights

'won't blow the horn' was the complaint

it did, but very weak horn sound

find horn stuffed with oil-soaked shop towels

investigation revelaed 'the guys' thought it was great fun to set it off when 
the mechanic had his head under the hood

so he took 'corrective action'

Gary


  ----- Original Message ----- 
  From: skipp025 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Saturday, March 07, 2009 10:39 AM
  Subject: [Repeater-Builder] Today's funny two-way radio story (March 09). The 
Siren - PA Speaker War


  Re: Today's funny two-way radio story (March 09). 

  The Siren - PA Speaker War 

  Today's very funny story was told to me by a friend after my 
  seeing the evidence in a shop. 

  A service call to fix the Siren on a Public Safety Vehicle 
  with reported problematic volume level. Most radio type service 
  people have a test method or routine to find the failed speaker, 
  pa amplifier, broken wire or blown fuse. 

  Lots of output voltage to the vehicle front mounted speaker, 
  the type of which are sometimes problematic from weather/water
  damage. Off to the front bumper... 

  Can't seem to get the speaker cone off... normally a tight but 
  not a frozen screw-on fit. Out come the serious tools to break 
  the speaker cone free. 

  So... after a lot of work the cone comes off and there's a 
  permanent thread locking glue on the cone threads. Hummm...? 

  Wait! there's foam and a rubber plug inside the cone..? Someone 
  wanted to reduce the speaker output level and lock it in place? 

  Care to guess what's going on..? 

  Well Sailors... 

  A bit of detective work to figure out the owner of the vehicle 
  has/had a habit of testing his full volume PA & Siren functions 
  very early every morning, while pulling out of his house/drive way. 

  One of his nearby neighbors didn't appreciate the everyday wake 
  up call and finally did the foam/rubber plug muffle trick and 
  mounting thread lock to the bumper mounted siren speaker cone. 

  Life goes on... 

  Epilog: 

  I/we do use the rubber plug and foam trick to reduce PA - Siren 
  Volume levels while testing equipment. Helps on hearing and 
  annoyance levels. 

  Your results will probably vary... 

  cheers, 
  s. 



  


------------------------------------------------------------------------------




  Checked by AVG - www.avg.com 
  Version: 8.0.237 / Virus Database: 270.11.8/1987 - Release Date: 03/06/09 
07:20:00

Reply via email to