Micor 900 receivers at +/- 5 KC. ------ Original Message ------ Received: Sun, 22 Nov 2009 03:31:31 PM PST From: James Adkins <adkins.ja...@gmail.com> To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: Motorola Spectra 900's
> I wonder, are the Micor receivers 2.5 kHz bandwidth or wideband. > > On Sun, Nov 22, 2009 at 2:23 PM, Mike Morris WA6ILQ <wa6...@gmail.com>wrote: > > > > > > > At 10:22 AM 11/22/09, you wrote: > > > > >Been there done that seven years ago...it is a liiittle more than > > >the three items listed that need to be done........ > > >For the NUC RX idea, I have been thinking about doing a rx for that > > >purpose, however, my concern is, will all that work have pay dirt... > > >If some one can show the 902 rx front end is truly usable in high rf > > >environment, I will work with them to...git-er-done... > > > > What's wrong with a Moto Aux Receiver (a Micor) on 900? > > They exist, work REAL well, have independent COR (channel busy) and > > PL decode lines, etc. > > The Aux Receiver chassis has the receiver board vertical, the MSF > > Link Receiver chassis has > > it horizontal to take up less rack space. > > > > > > >I currently have two 900 spectras in a sales catalog bag with wide > > >duplexer and controller to operate on any one of the eighty channels > > >902-903 and 927-928. All that's needed is twelve volts and antenna. > > > > Want to do an article on it? > > > > Mike WA6ILQ > > > > > > > > > > -- > James Adkins, KB0NHX > Vice-President -- Nixa Amateur Radio Club, Inc. (KC0LUN) > > Southern Missouri Frequency Coordinator - Missouri Repeater Council > www.nixahams.net > > The Nixa Amateur Radio Club - "There is no charge for awesomeness!" (Well, > only $1.00 per month) >
