Something worth mentioning about the info on the site that was posted - the 35-ohm matching sections need only use a single 1/4 wave piece of cable, then the remaining length of that run can be 50-ohm cable.
Chuck WB2EDV ----- Original Message ----- From: "Jeff DePolo" <j...@broadsci.com> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, December 02, 2009 9:40 AM Subject: RE: [Repeater-Builder] DB-212's > > That's pretty good. But what I had were the actual cutting dimensions for > the elements, cables, etc. right from Decibel, similiar to what I posted > for > the Phelps-Dodge/Celwave dipoles. I know I have it *somewhere*... > > --- Jeff > > >> -----Original Message----- >> From: Repeater-Builder@yahoogroups.com >> [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Huntley, Joel >> Sent: Wednesday, December 02, 2009 8:04 AM >> To: Repeater-Builder@yahoogroups.com >> Subject: [Repeater-Builder] DB-212's >> >> >> >> Jeff... >> Something similar to this? >> >> http://www.ccdx.org/zedyx/mods/db212.htm >> <http://www.ccdx.org/zedyx/mods/db212.htm> >> >>
