During receive only, the draw is about 0.125 amperes. During duplex transmit, the current draw goes up to about 0.355 amperes. These numbers were measured on one Micor station, and I would expect the current draw to vary perhaps +/- 50 mA between various stations. YMMV.
73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025 Sent: Tuesday, February 23, 2010 10:26 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Micor UHF Repeater Base 9.6 vdc current requirement? re: Micor UHF Repeater Base 9.6 vdc current requirement? Any of you Micor People know the actual total 9.6 volt supply current requirement? ... as in removing the power supply and running the equipment off battery power. The 9.6 vdc is still required but at how much current? Anyone know the real measured current value? thanks in advance for your reply cheers, skipp