50-ohms. MUST work against a metallic member longer than the element. Chuck WB2EDV
----- Original Message ----- From: "Tyke" <tyke1...@yahoo.com> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, March 31, 2010 9:44 PM Subject: [Repeater-Builder] feedpoint impedance for DB-212 > Ok now, time pick some brains and or stir up the old gray matter! > > Anybody know the feedpoint imprdance od the DB-212 lowband antennas. > They look to be too far apart for 300 or 450 ohm, and seem to be too far > apart for 600 ohm. any old DB Product engineers out there who would wish > to grace us with their knowledge would be greatly appreciated!! > It appears to be way above the range of a MFj-259 antenna analyzer! > > Tyrone N5XES > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.791 / Virus Database: 271.1.1/2782 - Release Date: 03/31/10 14:32:00