There were more *commercials* than the actual video - but it was pretty good to
watch.
Don, KD9PT
----- Original Message -----
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 24, 2010 3:25 PM
Subject: Re: [Repeater-Builder] Lost 10 volts in a Master II UHF Repeater
On 5/24/2010 11:38 AM, Kevin Custer wrote:
I went out and saw the bolt heads (with nice washers I might add) on the
under side of the case of the radio. He drilled 2 mounting holes right
through both sides of the case (and circuit board) and mounted that
radio to the dash. It sure looked good, and it wasn't going anywhere,
but the radio failed to operate after he wiped out most of the VCO and
audio amplifier components with the 1/2" drill bit.
Great example of applying the rule: "Safety First"!
You have to see the Dirty Jobs episode and Mike Rowe's speech in it
titled,"Safety Third" -- to really understand that comment...
http://dsc.discovery.com/videos/dirty-jobs-rocky-safety-third/
Nate WY0X
