Thanks Scott..........Lee On Sun, Jun 20, 2010 at 9:56 PM, Scott Zimmerman <n3...@repeater-builder.com > wrote:
> > > I've had enough of this guy. He's gone. > > You're all welcome. > > Scott - List Co-Owner > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > > kevin valentino wrote: > > > > > > *Hey you still owe me 3 # bucks for sending you a Uniden key!* Hope > > the whole world knows know! you just blew me off?!!!!!!!!!!!!!!! it was > > over a year ago at least!* sent you several emails. guess if you can't > > afford a couple bucks then you should not to try to make yourself out to > > mister want to be!Which for a couple bucks is nothing!!!!!!!Guess you > > can't be* *trusted!!!!! Mr. Mike Morris! Wa6ilg, so impressed, no code! > > wannabie!!!!!!!!!!!!!!!!!!!!!!! yes you are!!!!!!!!!!!!!!!!!!!!!!!* > > > > --- On *Sun, 6/20/10, Mike Morris /<wa6...@gmail.com<wa6ilq%40gmail.com>>/* > wrote: > > > > > > From: Mike Morris <wa6...@gmail.com <wa6ilq%40gmail.com>> > > Subject: Re: [Repeater-Builder] Astron RS50 Power Supply > > To: Repeater-Builder@yahoogroups.com<Repeater-Builder%40yahoogroups.com> > > Date: Sunday, June 20, 2010, 6:23 PM > > > > > > At 11:22 AM 06/20/10, you wrote: > > >Hi Guys, > > >I am trying to download a schematic on this site for the RS50M Power > > >Supply and keep getting a 404 Error on each attempt on all the > > >supplies. Any ideas? > > > > Did you use the email link on the 404 page to tell the guys at > > repeater-builder? > > > > I just checked the RS50 links and they all seem to work... > > > > Let me know which link doesn't work and I'll fix it. > > > > You might want to read the repair and modification notes on the > > "Introductory Information" page. > > At the least you should add the missing compensation cap and > > the missing lock washers. > > > > Make sure the negative side of the supply is NOT connected to the case. > > Eric WB6FLY posted a informative note about that a while back. > > It's reproduced on the "Introductory Information" page. > > > > According to the schematic the main diodes in the RS-50 is the 1N1184A. > > International Rectifier calls it a 40 amp diode. > > What brand is in your unit? > > > > I rebuilt an RS50 a couple of years ago and used a pair of the > > 1N2129A (60 amp diode). > > If I were to do it over again I'd use a 100a diode like the 1N3288 > > that I use in the RS-70. > > > > Mike WA6ILQ > > > > > > > > > > -- "Always drink upstream from the herd."
