So will someone post a simple rule of thumb. If you have the option of optimizing cable length from PA to first cavity, IE you haven't made them yet what's the best "simple" rule of thumb to follow to build them to avoid reactance. 1/2wl if allowed minus coupling loop depth? Or is that past a simple thumb. Also, This will obviously not work well for 220 or 440 or a most vhf repeater setups. So what would the next ideal cable wl be? And so forth. The reason I ask, if your building new cables why not? Answers on here seem to range a lot. Ross kc7rjk
- RE: [Repeater-Builder] Coax length, etc. Jeff DePolo
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- RE: [Repeater-Builder] Coax length, etc. Jeff DePolo
- Re: [Repeater-Builder] Coax length, etc. Chuck Kelsey
- Re: [Repeater-Builder] Coax length, etc. Joe
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- RE: [Repeater-Builder] Coax length, etc. Eric Lemmon
- RE: [Repeater-Builder] Coax length, etc. Ross Johnson
- RE: [Repeater-Builder] Coax length, etc. Ross Johnson
- Re: [Repeater-Builder] Coax length, etc. Russ Hines
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- RE: [Repeater-Builder] Coax length, etc. Jeff DePolo
- RE: [Repeater-Builder] Coax length, etc. Mark
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- Re: [Repeater-Builder] Coax length, etc. Russ Hines
- RE: [Repeater-Builder] Coax length, etc. Gary Schafer
- Re: [Repeater-Builder] Coax length, etc. Kevin Custer
- Re: [Repeater-Builder] Coax length, etc. Russ Hines