Rob,
I recall reading, but don't recall where, that this is related to a
firmware issue in the drive. In any case, it would be adviseable
to check the firmware and bring it to current level:
Here's the Ecrix firmware page:

http://www.ecrix.com/support/download.cfm

Doug.Wyman


>Hi Backup People,
>
>I have set up one of my clients with an Ecrix VXA tape drive using the above
>media. It was my understanding that with the hardware compression built into
>the drive turned on I would get the full 66 Gig capacity. My client has just
>rung me to say that Retrospect is requesting a new tape & a quick inspection
>(over the phone via my client) of the original tape in the scheduled backup
>set revealed that it has used 33 Gig. I will have to go & investigate this
>but could someone who knows please tell me if I need to have software
>compression turned on to get 66 Gig out of the tape or is there something
>else making Retrospect ask for another tape.
>
>The backup set which was due to be used tonight was set A & Retrospect is
>saying that it will call the new tape 2-set A which makes me think it
>probably is full.
>
>Thanks in advance to anyone who takes the time to reply
>Regards
>--
>Rob Findlay
>Mactherapy - Solutions & Support
>For Macintosh Computers
>http://www.mactherapy.com
>*************************
>
>
>
>--
>----------------------------------------------------------
>To subscribe:    [EMAIL PROTECTED]
>To unsubscribe:  [EMAIL PROTECTED]
>Archives:        <http://list.working-dogs.com/lists/retro-talk/>
>Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>
>
>For urgent issues, please contact Dantz technical support directly at
>[EMAIL PROTECTED] or 925.253.3050.



--
----------------------------------------------------------
To subscribe:    [EMAIL PROTECTED]
To unsubscribe:  [EMAIL PROTECTED]
Archives:        <http://list.working-dogs.com/lists/retro-talk/>
Search:  <http://www.mail-archive.com/retro-talk%40latchkey.com/>

For urgent issues, please contact Dantz technical support directly at
[EMAIL PROTECTED] or 925.253.3050.

Reply via email to