My understanding is that the main difference between desktop drives
and enterprise raid array drives in this regard is that the drive firmware
is configured to retry errors a lot longer on the desktop drives.
It is also my experience, although it was a few years ago on older
model WD drives, that the main thing that would produce problems of
disk drives dropping out of the array (desktop or enterprise)
is unexpected vibration of one kind or another. Easy for harmonics
to build up between the fans and the drive heads.
We have several Megaraid 9260-i controllers (and their successors and
their predecessors) in production but we did spend the money for the
enterprise drives.
Steve Timm
On Thu, 4 Oct 2012, Ken Teh wrote:
I've run into problems trying to use desktop disks in a RAID array with a
MegaRAID 9260-8i. I built 2 previous systems with desktop disks and did not
have any problems but I've been unable to get this 3rd system to function
stably. Disks dropped from the array except the disks are fine which I
proved by deleting the disk group and starting again.
This behaviour is consistent with Western Digital's discussion about TLER
(time-limited error recovery) and their admonition to use enterprise disks
instead of desktop disks.
I was wondering if there are ways of getting around this problem without
having to buy another set of disks. Googling suggests some options to try
but I thought I'd used the list as a sounding board first before embarking on
options.
Thanks!
------------------------------------------------------------------
Steven C. Timm, Ph.D (630) 840-8525
t...@fnal.gov http://home.fnal.gov/~timm/
Fermilab Computing Division, Scientific Computing Facilities,
Grid Facilities Department, FermiGrid Services Group, Group Leader.
Lead of FermiCloud project.
