[Dx4win] (no subject)
Dear Friends:
Will appreciate your assistance to solve the following:
I am using the MMTTY interfaced with DX4WIN, Ver 7.01 software and the
interface between my Mark V and the PC is the Nomic Rig Blaster.
Whenever I grab a cluster spot both the green LSB and the red RTTY leds light
but I am unable to transmit, since the PTT is not activated. However, if I
turn off the red RTTY led and only leave the LSB led on I am able to transmit.
Obviously, this causes a shift on the frequency and I am obliged to retune.
That process is time consuming and inefficient. So will appreciate comments on
the proper way to configure the system so that I can transmit as soon as I grab
the spots.
Appreciate very much comments on the above situation.
73 de Luis, KP4ED
From [EMAIL PROTECTED] Tue Feb 14 10:28:46 2006
From: [EMAIL PROTECTED] (Rick Craig)
Date: Tue Feb 14 10:30:40 2006
Subject: [Dx4win] {Spam?} re: MMTTY
Message-ID: [EMAIL PROTECTED]
I'm also having problems getting MMTTY to work with DX4Win. According to the
help file, hitting F1 through F8 should key the transmitter and send the
message.
When I try it, it doesn't key the transmitter but does que the message so
when I
hit F11, the transmitter keys and the message goes out. Am I missing a special
character at the front of the message that will key the transmitter? I
couldn't find
anything in the help file that would give me a clue.
Thanks, Rick, N6ND
n6nd at arrl dot net
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
[Dx4win] RTTY F KEYS AND COM PORT
Question 1- My F keys will not send the message but I can send from keyboard
Question 2- (Maybe related to #1)When I key an F key I get a message
An exception occured- Device already open.
I have the keying for RTTY on Com2. I used to also have the keying
for CW on Com2 but found that won't work even if I only have one of
the windows open at a time. So now if I want RTTY I have to set CW to
Comm- None.
--
Tnx es 73
Dick W7ZR
www.w7zr.com
From [EMAIL PROTECTED] Tue Feb 14 12:37:50 2006
From: [EMAIL PROTECTED] (Floyd Sense)
Date: Tue Feb 14 12:38:20 2006
Subject: [Dx4win] {Spam?} re: MMTTY
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
If you put %X at the start of the message it will key the PTT line and send
the message.
73, K8AC
- Original Message -
From: Rick Craig [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Tuesday, February 14, 2006 10:28 AM
Subject: [Dx4win] {Spam?} re: MMTTY
I'm also having problems getting MMTTY to work with DX4Win. According to
the
help file, hitting F1 through F8 should key the transmitter and send the
message.
When I try it, it doesn't key the transmitter but does que the message so
when I
hit F11, the transmitter keys and the message goes out. Am I missing a
special
character at the front of the message that will key the transmitter? I
couldn't find
anything in the help file that would give me a clue.
Thanks, Rick, N6ND
n6nd at arrl dot net
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
{Spam?} Re: [Dx4win] {Spam?} re: MMTTY {Scanned}
Thanks Floyd, that did the trick.
73 Rick N6ND
At 12:37 PM 2/14/2006 -0500, Floyd Sense wrote:
If you put %X at the start of the message it will key the PTT line and send
the message.
73, K8AC
- Original Message -
From: Rick Craig [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Tuesday, February 14, 2006 10:28 AM
Subject: [Dx4win] {Spam?} re: MMTTY
I'm also having problems getting MMTTY to work with DX4Win. According to
the
help file, hitting F1 through F8 should key the transmitter and send the
message.
When I try it, it doesn't key the transmitter but does que the message so
when I
hit F11, the transmitter keys and the message goes out. Am I missing a
special
character at the front of the message that will key the transmitter? I
couldn't find
anything in the help file that would give me a clue.
Thanks, Rick, N6ND
n6nd at arrl dot net
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
n6nd at arrl dot net
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact [EMAIL PROTECTED] if you have
questions about this email.
[Dx4win] RTTY F KEYS AND COM PORT
Never tried that before, but did after seeing your question. I use COM2 for RTTY and so set up COM2 for CW as you have. With no MMTTY window open, I can send CW just fine from the window. If I then open the DX4WIN MMTTY window, MMTTY will not key the COM2 interface under any conditions - using the TX key in MMTTY or any of the message buffers. As you said, the CW window doesn't have to be open at the time for this to be a problem. I also have to set the CW port to NONE in order for MMTTY to work properly on the same COM port. I just recently upgraded to DX4WIN 7.01 to check out the MMTTY implementation. I was disappointed to see that the macro buttons that normally appear at the left of the signal displays is not present when using MMTTY from within DX4WIN. Guess that's a casualty of the way MMTTY implemented the interface. 73, K8AC - Original Message - From: Richard Zalewski [EMAIL PROTECTED] To: REFLECTOR dx4win dx4win@mailman.qth.net Sent: Tuesday, February 14, 2006 11:02 AM Subject: [Dx4win] RTTY F KEYS AND COM PORT Question 1- My F keys will not send the message but I can send from keyboard Question 2- (Maybe related to #1)When I key an F key I get a message An exception occured- Device already open. I have the keying for RTTY on Com2. I used to also have the keying for CW on Com2 but found that won't work even if I only have one of the windows open at a time. So now if I want RTTY I have to set CW to Comm- None. -- Tnx es 73 Dick W7ZR www.w7zr.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] RTTY F KEYS AND COM PORT
(Pink) Floyd K8AC wrote: I just recently upgraded to DX4WIN 7.01 to check out the MMTTY implementation. I was disappointed to see that the macro buttons that normally appear at the left of the signal displays is not present when using MMTTY from within DX4WIN. Guess that's a casualty of the way MMTTY implemented the interface. Works the same way with Writelog. You get a minimalist MMTTY window. -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
