Re: [amibroker] OT: installing OS again
You can also take a look at the link below http://www.macrium.com/reflectfree.asp On Sep 8, 2010, at 10:44 PM, Keith McCombs kmcco...@engineer.com wrote: Anthony -- I use: http://www.terabyteunlimited.com/image-for-windows.htm#IFWFEATURE If you click on Download, you can download a trial version. Sorry, I don't know what the limitations are on this version. I have, and use, the complete bundle including BootIt NG (for disk partitioning). $49. There is a learning curve (but not nearly as steep as AB). Another popular one is: http://www.acronis.com/homecomputing/products/trueimage/ I used a previous version of their Pro line, Backup Recovery. It also has a trial version. It was easier to use than I4W above. But I have used I4W for many, many years, so I just stick with it. Also, Terabyteunlimited doesn't charge for updates. Acronis does. -- Keith On 9/8/2010 07:31, Anthony Faragasso wrote: Thank you everyone... Keith, I am using windows Vista home premium...I can not run in Repair mode...I have exhausted all methods I can think of to repair the OS.. There are several / many Services that can not be started no matter what I have tried...I have not been able to update the OS through the windows automatic update service for sometime I do NOT have all installed program disks... Are there any free disk Imaging softwares that allow what you suggest ? Anthony - Original Message - From: Keith McCombs To: amibroker@yahoogroups.com Sent: Tuesday, September 07, 2010 11:52 PM Subject: Re: [amibroker] OT: installing OS again Before you attempt to do anything else, make a complete image of your hard drive. Make sure that your disk imaging software will allow you to recover individual folders and files as well as the entire image. Then see if you can run your OS installation software in 'Repair' mode. If you can, you may end up fixing what ever your problem is, without needing to reinstall any software. If that doesn't work, maybe you might have to reinstall the OS. Are you absolutely sure that the only solution to your problem is a complete re-install? Positive? Absolutely Positive? If so: Just because you have copies of all your installed programs does NOT mean that you can merely copy them onto the newly installed OS. You will have to re-install almost all of your programs. For this you need the Original installation programs, including protection keys, either on disks or saved elsewhere. Good luck, -- Keith BTW, I have been using PC's since the very first IBM ones. Probably owned a couple of dozen since then. The only time I have had to reinstall an OS was when I lost my first HD more than 25 years ago. Since then, I make drive images and/or use other work arounds. On 9/7/2010 02:36, reinsley wrote: Hi, IMO, before to format, save your My documents files ( it's another name under Vista, the file containing all your personnal documents), save your bookmarks ( IE or Firefox), save your Outlook settings (address book contacts, settings accounts) Emails as well if needed, but they are on ISP's server. Save the other application files such as AB, into c:\Program Files. Your formulas, your databases, etc. are there. Then format the disk, and start from scratch, install vista. Don't forget the drivers. Install all your applications. Printer and gadgets... Restore your My documents, and AB formulas, AB databases. You can do a todolist of the actions before to start. You update this document as and when you did it. Next install you update your technical notes, the order to proceed, the things forgotten. It's a good way to never miss a step. When everything is running fine for a while, you know what is worth to backup from time to time. :) Best regards Le 07/09/2010 00:44, Anthony Faragasso a écrit : I need to re-install windows Vista to correct several issues I am having... I purchased an external Hard drive...How do I move all programs and files to the external hard drive and then move them back to the computers internal hard drive after re-installing the operating system ? I do not think just backing up the internal hard drive will preserve all programs...some programs I do not have disks for... Help... thank you Anthony
Re: [amibroker] Re: Amibroker commissions in other currencies.
Use buyprice and sellprice : Spread = 0.0002; Buyprice = close + spread; Sellprice = close - spread; On Sep 9, 2010, at 11:15 AM, pipadder pipad...@yahoo.com wrote: Hi, Thanks for the tip. I am actually using those specifications already, one needs to detail the margin, the value of a pip, etc in order to get appropriate order sizing and accurate results. That part works fine. The problem is that there is nothing there related to commisions or -more specifically- to the currency they are expressed in. The currency field in that information window works fine to translate everything to the account currency... everything but the commissions! So far the only idea that comes to mind would be to use as account currency the quote currency (for example JPY for backtesting USDJPY). That would produce accurate results, but it would be a little bit of a pain, and would require changing the account for every currency pair with a different quote currency. I am sure there has to be an easier way to do this. --- In amibroker@yahoogroups.com, reinsley reins...@... wrote: Hi, In Symbol | information | menu You can set contract specification for each future. I hope it helps you. Best regards IMPORTANT PLEASE READ This group is for the discussion between users only. This is *NOT* technical support channel. TO GET TECHNICAL SUPPORT send an e-mail directly to SUPPORT {at} amibroker.com TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at http://www.amibroker.com/feedback/ (submissions sent via other channels won't be considered) For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: http://www.amibroker.com/devlog/ Yahoo! Groups Links
Re: [amibroker] How can I implement to PnF by Graham Kavanagh 17 Apr 2004
That is the exploration code I wrote sometimes ago.. If you are interested for a newer version you may contact me privately. Aron. On 4/15/09, tomczykd tomcz...@yahoo.com wrote: Hello, I use PF chart based on closing price by Graham Kavanagh, 17 Apr 2004. This is very helpfull tools for me. Some time ago I found the following code for another PnF and I would like to implement Exploration Settings to Graham's PnF chart. Please help me. I try, try and nothing. Best regards. Dominik // part of code pattern = ; doubleTop = ; tripleTop = ; tripleBot = ; AscTriangle = ; DescTriangle = ; doubleBot =; rectangle = ; SymTriangle = ; Catapult = ; _SECTION_BEGIN(Exploration Settings); fr = Param(from, 3, 3, 100,1); to = Param(to, 50, 10, 100,1)+1; _SECTION_END(); for (b = fr; bto; b++) { Box = b/decimals; pf(box); btxt = NumToStr(b, 3.0); eq2 = Cl[x] == Cl[x-2]; eq3 = eq2 Cl[x-2] == Cl[x-4]; if(eq2) { if (direction[x] ) doubleTop = doubleTop + + btxt; else doubleBot = doubleBot + + btxt; } if (eq3) { if (direction[x] ) tripletop = tripletop + + btxt; else tripleBot = tripleBot + + btxt; } if ( eq3 == Cl[x-4] range[x-3] range[x-1] range[x-4] 1.2* range[x-3]) { if(direction[x]) AscTriangle = AscTriangle + + btxt; else DescTriangle = DescTriangle + + btxt; } match = 0; for ( num = 1; num 5; num++) { if( range[x]- range[x-num]==0) match ++; } if (match ==4) rectangle = rectangle + + btxt; if (range[x]- range[x-1]== range[x-1]- range[x-2] range[x-1]- range[x-2] == range[x-2] - range[x-3] range[x] range[x-1] range[x-4] 1.2* range[x-3]) SymTriangle = SymTriangle + + btxt; C1 = eq2 Cl[x-4] == Cl[x-6]; C2 = AlmostEqual(Cl[x-2] - Cl[x-4], -box,50) !direction[x]; C3 = AlmostEqual(Cl[x-2] - Cl[x-4], box,50) direction[x]; C4 = C2 || C3; if( C1 C2 || C1 C3) Catapult = Catapult + + btxt; } Filter = 1; format = 8.0; CellWidth = 70; AddTextColumn( doubleTop, DoubleTop,format, colorBlue, colorDefault, CellWidth); AddTextColumn( doublebot, DoubleBottom, format, colorRed, colorDefault, CellWidth); AddTextColumn( tripleTop, TripleTop,format, colorBlue, colorDefault, CellWidth); AddTextColumn( tripleBot, TripleBottom, format, colorRed, colorDefault, CellWidth); AddTextColumn( AscTriangle, AscTriangle, format, colorBlue, colorDefault, CellWidth); AddTextColumn( DescTriangle, DescTriangle, format, colorRed, colorDefault, CellWidth); AddTextColumn( rectangle, Range,format, colorGrey50, colorDefault, CellWidth); AddTextColumn( symTriangle, SymTriangle, format, colorGrey50, colorDefault, CellWidth); AddTextColumn( catapult, Catapult, format, colorGrey50, colorDefault, CellWidth); IMPORTANT PLEASE READ This group is for the discussion between users only. This is *NOT* technical support channel. TO GET TECHNICAL SUPPORT send an e-mail directly to SUPPORT {at} amibroker.com TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at http://www.amibroker.com/feedback/ (submissions sent via other channels won't be considered) For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG: http://www.amibroker.com/devlog/ Yahoo! Groups Links