[asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
Dear Mojo;
That is primary fine, but there are two issues looking
for help about them:
1) Based on your below example (dialing *4*18005551212
to select channel 4), the question is how to give
second dial tone just after dialing the *4*
(indicating the channel was captured)?
2) How to let this second dial tone to be with a
frequency differs than normal tone when pickup the
handset to place a call?
3) How to let (assign) one of the button on my IP
Phone to be dedicating for a zap channel, so when I
select this button and do dialing for a number, then
call will be done via that specific zap channel.
Any help?
Regards
Bilal
-
It would be ugly, but you could prefix a zap channel
or group number
before the phone number to dial. Using groups for an
example:
exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3})
exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4})
so dialing *4*18005551212 dials out over zap group
4...
bilal ghayyad wrote:
I need to select a line from the Zap group channel
using the SIP Phone (not FXO and not FXS ports).
ignorepat does not work?
Also, what is the method to let the second dial tone
has another tone frequency?
Regards
Bilal
Building a website is a piece of cake. Yahoo! Small Business gives you all the
tools to get online.
http://smallbusiness.yahoo.com/webhosting
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
Dear Walt; Maybe I did not understand any thing from below :) - Are you talking about configuration to be done on the Telephone device is self or on the AVAYA server it self? If it is on the telephone device, so how you will give a second dial tone and you do not know if there is available channel :) - I am looking to have a second dial tone by doing such configuration at AVAYA server itself, and that to be used by all users of different IP Phones models (not link sys only). Can you help? Regards Bilal -- For another tone frequency for the outside dialtone, try putting this value [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];*(.4/0/1),10(*/0/2+3) in the Outside Dialtone field. It will give you a slight pause followed by a different dialtone frequency. On a Linksys/Siprua 941, that would be at the top of the Regional page. However, you won't hear any secondary dialtone unless you put a comma after EVERY initial '9' in the dialplan string for each line in use. On a 941, that would be at the bottom of the Ext 1 and Ext 2 pages of the web interface. I suggest the dialplan string of: (*xx|[1-7]xx|9,[3469]11|98|99|9,[2-9]xx|9,11|9,[2-9]xx|9,1[2-9]xx[2-9]xx|9,011xxx.) - Walt Joyce Eric ManxPower Wieling wrote: I can't help you with that. I only wanted to point out that ignoreopat is not what you need. On Polycom SIP phones you continue dialtone by placing a , in the phone's dialplan. SIP phones have their own internal dialplan that is not part of Asterisk's dialplan. You would have to check the docs for your phone. Not all SIP phones can continue dialtone. bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games. http://sims.yahoo.com/ ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
The problem here, if it's a problem, is that it IS a POTS dialtone and
not asterisk's. So you can dial only what the telco lets you dial.
Al lists wrote:
Here is how i overcome this problem,
ignorpat = 9
exten = 9*,1,Dial(ZAP/1/w)
press 9* from your handset and after 1 second you have POTS line dial
tone on your phone,
On 10/3/07, *Mojo with Horan Company, LLC* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
It would be ugly, but you could prefix a zap channel or group number
before the phone number to dial. Using groups for an example:
exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3})
exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4})
so dialing *4*18005551212 dials out over zap group 4...
bilal ghayyad wrote:
I need to select a line from the Zap group channel
using the SIP Phone (not FXO and not FXS ports).
ignorepat does not work?
Also, what is the method to let the second dial tone
has another tone frequency?
Regards
Bilal
No, ignorepat is for FXS ports (FXS ports use FXO
signaling). Also,
ignorepat does not apply to SIP phones, because SIP
phones provide
their
own dialtone, not a dialtone provided by Asterisk.
Al lists wrote:
Correction, on FXO port not FXS,
second, read his email first:
Also, how it will be possible to assign an
dedicated
line (connected to FXO) to an
button on the Polycom IP Phone or Broadtel IP Phone,
so if user select that button
then he will be sure that his outside call will be
via
that specific line.
Just assign a key on your phone to dial that
extension, and you will
have
dial tone on selected line,
then as a traditional PBX you can send any digits to
your provider.
On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
wrote:
ignorepat continues dialtone after a leading digit
has been dialed
on
FXS ports. How does ignorepat help this guy?
Al lists wrote:
ignorpat is your friend
On 9/30/07, Tzafrir Cohen
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote:
On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal
ghayyad wrote:
Dear List;
How can I place a call via Zap/g1 (group) but
need to
determine the line (FXO port)
that will go via it?
Simply don't use groups. Use channels directly.
To dial via the
specific
Zaptel channel NN, use Zap/NN
Am I missing anything?
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now
(it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by
http://www.api-digital.com-- http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
I can't help you with that. I only wanted to point out that ignoreopat is not what you need. On Polycom SIP phones you continue dialtone by placing a , in the phone's dialplan. SIP phones have their own internal dialplan that is not part of Asterisk's dialplan. You would have to check the docs for your phone. Not all SIP phones can continue dialtone. bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
For another tone frequency for the outside dialtone, try putting this value [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED];*(.4/0/1),10(*/0/2+3) in the Outside Dialtone field. It will give you a slight pause followed by a different dialtone frequency. On a Linksys/Siprua 941, that would be at the top of the Regional page. However, you won't hear any secondary dialtone unless you put a comma after EVERY initial '9' in the dialplan string for each line in use. On a 941, that would be at the bottom of the Ext 1 and Ext 2 pages of the web interface. I suggest the dialplan string of: (*xx|[1-7]xx|9,[3469]11|98|99|9,[2-9]xx|9,11|9,[2-9]xx|9,1[2-9]xx[2-9]xx|9,011xxx.) - Walt Joyce Eric ManxPower Wieling wrote: I can't help you with that. I only wanted to point out that ignoreopat is not what you need. On Polycom SIP phones you continue dialtone by placing a , in the phone's dialplan. SIP phones have their own internal dialplan that is not part of Asterisk's dialplan. You would have to check the docs for your phone. Not all SIP phones can continue dialtone. bilal ghayyad wrote: I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone, not a dialtone provided by Asterisk. Al lists wrote: Correction, on FXO port not FXS, second, read his email first: Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Just assign a key on your phone to dial that extension, and you will have dial tone on selected line, then as a traditional PBX you can send any digits to your provider. On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED] wrote: ignorepat continues dialtone after a leading digit has been dialed on FXS ports. How does ignorepat help this guy? Al lists wrote: ignorpat is your friend On 9/30/07, Tzafrir Cohen [EMAIL PROTECTED] wrote: On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal ghayyad wrote: Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Simply don't use groups. Use channels directly. To dial via the specific Zaptel channel NN, use Zap/NN Am I missing anything? ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
It would be ugly, but you could prefix a zap channel or group number
before the phone number to dial. Using groups for an example:
exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3})
exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4})
so dialing *4*18005551212 dials out over zap group 4...
bilal ghayyad wrote:
I need to select a line from the Zap group channel
using the SIP Phone (not FXO and not FXS ports).
ignorepat does not work?
Also, what is the method to let the second dial tone
has another tone frequency?
Regards
Bilal
No, ignorepat is for FXS ports (FXS ports use FXO
signaling). Also,
ignorepat does not apply to SIP phones, because SIP
phones provide
their
own dialtone, not a dialtone provided by Asterisk.
Al lists wrote:
Correction, on FXO port not FXS,
second, read his email first:
Also, how it will be possible to assign an
dedicated
line (connected to FXO) to an
button on the Polycom IP Phone or Broadtel IP Phone,
so if user select that button
then he will be sure that his outside call will be
via
that specific line.
Just assign a key on your phone to dial that
extension, and you will
have
dial tone on selected line,
then as a traditional PBX you can send any digits to
your provider.
On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED]
wrote:
ignorepat continues dialtone after a leading digit
has been dialed
on
FXS ports. How does ignorepat help this guy?
Al lists wrote:
ignorpat is your friend
On 9/30/07, Tzafrir Cohen
[EMAIL PROTECTED] wrote:
On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal
ghayyad wrote:
Dear List;
How can I place a call via Zap/g1 (group) but
need to
determine the line (FXO port)
that will go via it?
Simply don't use groups. Use channels directly.
To dial via the
specific
Zaptel channel NN, use Zap/NN
Am I missing anything?
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for
today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Secondary Dialtone and selecting a specific line from Zap/g
Here is how i overcome this problem,
ignorpat = 9
exten = 9*,1,Dial(ZAP/1/w)
press 9* from your handset and after 1 second you have POTS line dial tone
on your phone,
On 10/3/07, Mojo with Horan Company, LLC [EMAIL PROTECTED] wrote:
It would be ugly, but you could prefix a zap channel or group number
before the phone number to dial. Using groups for an example:
exten = _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3})
exten = _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4})
so dialing *4*18005551212 dials out over zap group 4...
bilal ghayyad wrote:
I need to select a line from the Zap group channel
using the SIP Phone (not FXO and not FXS ports).
ignorepat does not work?
Also, what is the method to let the second dial tone
has another tone frequency?
Regards
Bilal
No, ignorepat is for FXS ports (FXS ports use FXO
signaling). Also,
ignorepat does not apply to SIP phones, because SIP
phones provide
their
own dialtone, not a dialtone provided by Asterisk.
Al lists wrote:
Correction, on FXO port not FXS,
second, read his email first:
Also, how it will be possible to assign an
dedicated
line (connected to FXO) to an
button on the Polycom IP Phone or Broadtel IP Phone,
so if user select that button
then he will be sure that his outside call will be
via
that specific line.
Just assign a key on your phone to dial that
extension, and you will
have
dial tone on selected line,
then as a traditional PBX you can send any digits to
your provider.
On 10/1/07, Eric ManxPower Wieling [EMAIL PROTECTED]
wrote:
ignorepat continues dialtone after a leading digit
has been dialed
on
FXS ports. How does ignorepat help this guy?
Al lists wrote:
ignorpat is your friend
On 9/30/07, Tzafrir Cohen
[EMAIL PROTECTED] wrote:
On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal
ghayyad wrote:
Dear List;
How can I place a call via Zap/g1 (group) but
need to
determine the line (FXO port)
that will go via it?
Simply don't use groups. Use channels directly.
To dial via the
specific
Zaptel channel NN, use Zap/NN
Am I missing anything?
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's
updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
