May I ask what you did?
robert
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vikram
Rangnekar
Sent: Tuesday, February 15, 2005 1:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Re: Sangoma A102 cards testing FIXED
Its fixed and working great.
I was working on the dma issue that nenad pointed out and when i tried
to hdparm -d 1 /dev/hda my harddisk i got a permissioned denied error
(I was root) So i started researching a bit more and realised that
since i have a sata hdd and running it in IDE mode i cant start dma so
i just recompiled the kernel with sata drivers and scsi activated then
i change the bio SATA setting to SATA ENHANCED (nothing else seems to
work) and changed the root=/dev/hda2 to
root=/dev/sda2 in the kernel boot options and i was on my way. now
when i tierd hdparm -d 1 /dev/sda i was told that scsi dosent have dma
so it didnt matter.
Next i started the wanpipe drivers and started asterisk i didnt get
any errors so to test th config i used
exten = 111,1,Dial(Zap/g1/301)
exten = 111,2,Hangup
and dialed that extension 111 and the extension 301 rang. i had
started pri intense debugging and used show channels to make sure the
call went over the e1 channels.
i'm still testing it, it seems to be working great right now only
error i got was a FCS BAD or somthing like that once.
My motherboard is a SuperMicro P4SCI just for your information.
+++ Vikram Rangnekar [13/02/05 13:01 +0100]:
Does anyone have any experience ith configureing the sangoma A102 card
for testing using a e1 cross cable i've configured and installed the
cards properly even the lights on the card are green which proves that
my cross cable is properly built too. my problem is with asterisk
which gives me these errors
PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got
event: HDLC Bad FCS (8) on Primary D-channel of span 2 No D-channels
available! Using Primary on channel anyways 47!
PRI: !! Not good - head of queue has not been transmitted yet
I've tried everything i can think off with the wancfg configuration
files here is my zaptel and zapata configs.
span=1,0,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3
bchan=32-46
dchan=47
bchan=48-62
--
zapata.conf
switchtype=euroisdn
signalling=pri_net
group=1
channel=1-15
channel=17-31
group=2
signalling=pri_cpe
channel=32-46
channel=48-62
---
do i need to fool around with some jumpers on the card or something to
activate internal clock on the card. zttol says INTERNALLY CLOCKED for
both the ports. There are NO Alarms and no missed IRQ's I'm using
asterisk 1.0.5 on debian with 2.4.29 kernel
--
regards
Vikram (http://www.vicramresearch.com)
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
regards
Vikram (http://www.vicramresearch.com)
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
