Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
Florent Barbier wrote: Hi here, Did you get any solution ? I've quiet the same pb : http://forums.digium.com/viewtopic.php?t=17394 Thank you for your answer. flo_turc Sorry for the late reply :-( We are aware of that particular issue, and working on tracking it down. Very big sorry for the inconvenience in the mean time :-( -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
Hi here, Did you get any solution ? I've quiet the same pb : http://forums.digium.com/viewtopic.php?t=17394 Thank you for your answer. flo_turc ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
Tzafrir Cohen wrote: On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote: We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from http://pkg-voip.buildserver.net Does it have misdn support? We add misdn support by compiling misdn1.1.4 When misdn stuff (misdn-init start) is not started, everything is fine, our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well. If we start the misdn stuff (one card, port 1,2,3,4 in misdn-init.conf and no TELCO cable plugged in the card), the dialtone disappear on TDM lines :-( Hmmm is Asterisk running? Yes. But if we rmmod the wctdm24xxp module, modprobe it again, Asterisk is not starting anymore we have to reboot it. Our problem is near the one from the thread problem starting asterisk, unable to load chan_zap opened by Sebastian Reitenbach. We always get Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No such device or address Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-2' Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, returning -1 Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap' Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed! What is to notice is the Unable to register channel '1-2' Why those two channels? Do you have zaptel channels in Asterisk? Asterisk is the one providing the dialtone. In short, what is the output of: asterisk -rx 'zap show channels' The channels are showned as they should. From looking logs and commands inside Asterisk, everything looks fine. Sorry to be not able to copy output of the command, I can't connect to the server at this time. But tht's one of the first thing I tested. Does someone has a similar working config? Is it a problem with asterisk version (we prefere to follow the pkg-voip team)? Thanks for any hint or experience The misdn packages shipped with Ubunntu are buggy (they were removed from Debian Etch due to that reason). The Asterisk package is not built with chan_misdn , IIRC. Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ... -- Daniel ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
Matthew Fredrickson wrote: On Jul 2, 2007, at 6:02 PM, Tzafrir Cohen wrote: [...] That's what I would say as well. Also, what's the output of dmesg when you releoad the card. Hi Matthew, this is what we get after rmmod modprobe wctdm24xxp [Jul 4 00:25:24] ERROR[20034]: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 [Jul 4 00:25:24] ERROR[20034]: Unable to register channel '1-2' [Jul 4 00:25:24] WARNING[20034]: chan_zap.so: load_module failed, returning -1 [Jul 4 00:25:24] WARNING[20034]: Loading module chan_zap.so failed! [Jul 4 00:25:24] NOTICE[20053]: CDR simple logging enabled. [Jul 4 00:25:24] WARNING[20053]: Unable to specify channel 1: No such device or address [Jul 4 00:25:24] ERROR[20053]: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 [Jul 4 00:25:24] ERROR[20053]: Unable to register channel '1-2' [Jul 4 00:25:24] WARNING[20053]: chan_zap.so: load_module failed, returning -1 [Jul 4 00:25:24] WARNING[20053]: Loading module chan_zap.so failed! [Jul 4 00:25:25] NOTICE[20070]: CDR simple logging enabled. [Jul 4 00:25:25] WARNING[20070]: Unable to specify channel 1: No such device or address [Jul 4 00:25:25] ERROR[20070]: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 -- Daniel ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
On Jul 2, 2007, at 6:02 PM, Tzafrir Cohen wrote: On Tue, Jul 03, 2007 at 12:04:08AM +0200, Administrator TOOTAI wrote: Tzafrir Cohen wrote: On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote: We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from http://pkg-voip.buildserver.net Does it have misdn support? We add misdn support by compiling misdn1.1.4 When misdn stuff (misdn-init start) is not started, everything is fine, our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well. If we start the misdn stuff (one card, port 1,2,3,4 in misdn- init.conf and no TELCO cable plugged in the card), the dialtone disappear on TDM lines :-( Hmmm is Asterisk running? Yes. But if we rmmod the wctdm24xxp module, modprobe it again, Asterisk is not starting anymore we have to reboot it. Our problem is near the one from the thread problem starting asterisk, unable to load chan_zap opened by Sebastian Reitenbach. We always get Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No such device or address Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 Problems at the zaptel level. cat /proc/zaptel/* cat /etc/zaptel.conf That's what I would say as well. Also, what's the output of dmesg when you releoad the card. --- Matthew Fredrickson Software Engineer Digium, Inc. Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-2' Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, returning -1 Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap' Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed! What is to notice is the Unable to register channel '1-2' Why those two channels? Take a look at /etc/asterisk/zapata.conf . Do you have zaptel channels in Asterisk? Asterisk is the one providing the dialtone. In short, what is the output of: asterisk -rx 'zap show channels' The channels are showned as they should. From looking logs and commands inside Asterisk, everything looks fine. Sorry to be not able to copy output of the command, I can't connect to the server at this time. But tht's one of the first thing I tested. Does someone has a similar working config? Is it a problem with asterisk version (we prefere to follow the pkg-voip team)? Thanks for any hint or experience The misdn packages shipped with Ubunntu are buggy (they were removed from Debian Etch due to that reason). The Asterisk package is not built with chan_misdn , IIRC. Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ... -- Daniel ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
Tzafrir Cohen wrote: [...] Problems at the zaptel level. cat /proc/zaptel/* cat /etc/zaptel.conf Here the outputs: [EMAIL PROTECTED]:~# cat /proc/zaptel/* Span 1: WCTDM/0 Wildcard TDM2400P Board 1 IRQ misses: 10 1 WCTDM/0/0 FXOKS (In use) 2 WCTDM/0/1 FXOKS (In use) 3 WCTDM/0/2 FXOKS (In use) 4 WCTDM/0/3 FXOKS (In use) 5 WCTDM/0/4 FXOKS (In use) 6 WCTDM/0/5 FXOKS (In use) 7 WCTDM/0/6 FXOKS (In use) 8 WCTDM/0/7 FXOKS (In use) 9 WCTDM/0/8 10 WCTDM/0/9 11 WCTDM/0/10 12 WCTDM/0/11 13 WCTDM/0/12 14 WCTDM/0/13 15 WCTDM/0/14 16 WCTDM/0/15 17 WCTDM/0/16 18 WCTDM/0/17 19 WCTDM/0/18 20 WCTDM/0/19 21 WCTDM/0/20 FXSKS (In use) 22 WCTDM/0/21 FXSKS (In use) 23 WCTDM/0/22 FXSKS (In use) 24 WCTDM/0/23 FXSKS (In use) [EMAIL PROTECTED]:~# ls -l /proc/zaptel/ total 0 -r--r--r-- 1 root root 0 2007-07-03 21:48 1 [EMAIL PROTECTED]:~# 8- [EMAIL PROTECTED]:~# cat /etc/zaptel.conf loadzone=fr defaultzone=fr fxoks=1-8 fxsks=21-24 Thanks for your help -- Daniel ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
On Wed, Jul 04, 2007 at 12:05:28AM +0200, Administrator TOOTAI wrote: Tzafrir Cohen wrote: [...] Problems at the zaptel level. cat /proc/zaptel/* cat /etc/zaptel.conf Here the outputs: [EMAIL PROTECTED]:~# cat /proc/zaptel/* Span 1: WCTDM/0 Wildcard TDM2400P Board 1 IRQ misses: 10 Hmmm 1 WCTDM/0/0 FXOKS (In use) 2 WCTDM/0/1 FXOKS (In use) [snip] Not sure what those problems were, but you seem to have gotten over them. Channels are available, configured and in use (by Asterisk, I guess). asterisk -rx 'zap show channels' -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote: We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from http://pkg-voip.buildserver.net Does it have misdn support? When misdn stuff (misdn-init start) is not started, everything is fine, our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well. If we start the misdn stuff (one card, port 1,2,3,4 in misdn-init.conf and no TELCO cable plugged in the card), the dialtone disappear on TDM lines :-( Hmmm is Asterisk running? Do you have zaptel channels in Asterisk? Asterisk is the one providing the dialtone. In short, what is the output of: asterisk -rx 'zap show channels' Does someone has a similar working config? Is it a problem with asterisk version (we prefere to follow the pkg-voip team)? Thanks for any hint or experience The misdn packages shipped with Ubunntu are buggy (they were removed from Debian Etch due to that reason). The Asterisk package is not built with chan_misdn , IIRC. -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk 1.2 TDM24xx and B410P
On Tue, Jul 03, 2007 at 12:04:08AM +0200, Administrator TOOTAI wrote: Tzafrir Cohen wrote: On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote: We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from http://pkg-voip.buildserver.net Does it have misdn support? We add misdn support by compiling misdn1.1.4 When misdn stuff (misdn-init start) is not started, everything is fine, our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well. If we start the misdn stuff (one card, port 1,2,3,4 in misdn-init.conf and no TELCO cable plugged in the card), the dialtone disappear on TDM lines :-( Hmmm is Asterisk running? Yes. But if we rmmod the wctdm24xxp module, modprobe it again, Asterisk is not starting anymore we have to reboot it. Our problem is near the one from the thread problem starting asterisk, unable to load chan_zap opened by Sebastian Reitenbach. We always get Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No such device or address Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such device or address here = 0, tmp-channel = 1, channel = 1 Problems at the zaptel level. cat /proc/zaptel/* cat /etc/zaptel.conf Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-2' Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, returning -1 Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap' Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed! What is to notice is the Unable to register channel '1-2' Why those two channels? Take a look at /etc/asterisk/zapata.conf . Do you have zaptel channels in Asterisk? Asterisk is the one providing the dialtone. In short, what is the output of: asterisk -rx 'zap show channels' The channels are showned as they should. From looking logs and commands inside Asterisk, everything looks fine. Sorry to be not able to copy output of the command, I can't connect to the server at this time. But tht's one of the first thing I tested. Does someone has a similar working config? Is it a problem with asterisk version (we prefere to follow the pkg-voip team)? Thanks for any hint or experience The misdn packages shipped with Ubunntu are buggy (they were removed from Debian Etch due to that reason). The Asterisk package is not built with chan_misdn , IIRC. Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ... -- Daniel ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users