[casper] System Compatibility
Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.
Re: [casper] System Compatibility
Hi Victor, I strongly recommend using Xilinx's 14.7 release. Some people use Ubuntu 12.04 -- see https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b -- but as Dan says, life might be easier with a supported operating system... Cheers, Jack On Tue, 23 Jun 2015 at 13:01 Dan Werthimer d...@ssl.berkeley.edu wrote: hi victor, i urge people to only use operating systems supported by xilinx: i think right now, that means windows7 pro, redhat enterprise linux 5 or 6, or suse enterprise linux. several casperites have tried to use non-supported linux operating systems for casper work. sometimes this can work fine for particular appliciations, sometimes it doesn't work. xilinx will not provide any support or answer any questions if you use a non-supported operating system. and we've seen be subtle bugs without any reported error messages with a non-supported operating system. one time we found the casper FFT didn't work for sizes over 2^13 points - there was no error message - it just computed the FFT incorrectly on the FPGA - the simulation worked fine... when we switched to redhat, the problem went away... best wishes, dan On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso victorcardoso...@hotmail.com wrote: Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.
Re: [casper] System Compatibility
hi victor, i urge people to only use operating systems supported by xilinx: i think right now, that means windows7 pro, redhat enterprise linux 5 or 6, or suse enterprise linux. several casperites have tried to use non-supported linux operating systems for casper work. sometimes this can work fine for particular appliciations, sometimes it doesn't work. xilinx will not provide any support or answer any questions if you use a non-supported operating system. and we've seen be subtle bugs without any reported error messages with a non-supported operating system. one time we found the casper FFT didn't work for sizes over 2^13 points - there was no error message - it just computed the FFT incorrectly on the FPGA - the simulation worked fine... when we switched to redhat, the problem went away... best wishes, dan On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso victorcardoso...@hotmail.com wrote: Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.
Re: [casper] System Compatibility
We use 12.04 + 14.7 without issues here at Penn. Brad Dober Ph.D. Candidate Department of Physics and Astronomy University of Pennsylvania Cell: 262-949-4668 On Tue, Jun 23, 2015 at 4:07 PM, Jack Hickish jackhick...@gmail.com wrote: Hi Victor, I strongly recommend using Xilinx's 14.7 release. Some people use Ubuntu 12.04 -- see https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b -- but as Dan says, life might be easier with a supported operating system... Cheers, Jack On Tue, 23 Jun 2015 at 13:01 Dan Werthimer d...@ssl.berkeley.edu wrote: hi victor, i urge people to only use operating systems supported by xilinx: i think right now, that means windows7 pro, redhat enterprise linux 5 or 6, or suse enterprise linux. several casperites have tried to use non-supported linux operating systems for casper work. sometimes this can work fine for particular appliciations, sometimes it doesn't work. xilinx will not provide any support or answer any questions if you use a non-supported operating system. and we've seen be subtle bugs without any reported error messages with a non-supported operating system. one time we found the casper FFT didn't work for sizes over 2^13 points - there was no error message - it just computed the FFT incorrectly on the FPGA - the simulation worked fine... when we switched to redhat, the problem went away... best wishes, dan On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso victorcardoso...@hotmail.com wrote: Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.
Re: [casper] System Compatibility
Hi Victor, We used to use Ubuntu 14.04, and it kind of worked, but it wasn't stable. Switched to the most recent version of CentOS about a month ago and haven't had problems since. Xilinx v14.7, Matlab 2012b. Regards, James On Wed, Jun 24, 2015 at 1:10 AM, Mark Wagner mwag...@ssl.berkeley.edu wrote: Hi Victor, A list of supported operating systems is here on page 7: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf If you need free, a much safer alternative to Ubuntu (but still unsupported) is CentOS 6.5, which is built from RHEL6 source packages. Mark On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso victorcardoso...@hotmail.com wrote: Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.
Re: [casper] System Compatibility
Hi Victor, A list of supported operating systems is here on page 7: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf If you need free, a much safer alternative to Ubuntu (but still unsupported) is CentOS 6.5, which is built from RHEL6 source packages. Mark On Tue, Jun 23, 2015 at 12:48 PM, Victor Cardoso victorcardoso...@hotmail.com wrote: Greetings, I am working with the ROACH 2 in order to implement the MUSIC project. I am having a lot of troubles to compile the Tutorial 1 (Introduction to Simulink) due to mismatch between Xilinx ISE 14.5 and my Operating System, Ubuntu 10.04. I would like to know if it's possible to run this example using Ubuntu. Otherwise, I can install Redhat Enterprise Linux 6.3, Matlab 12b and Xilinx 14.5 to run the codes. I look forward hearing from you. Best Regards, Victor Cardoso.