Re: [CentOS-docs] requesting to become a contributor
Richard Bronosky wrote: I had already created that account, but could not do the step of creating the homepage because of permissions. Great. I'm sure Ralph will get you set up in due course :) Also, please would you bottom post replies (rather than top posting) as that is the convention on these mailing lists. Thanks ___ CentOS-docs mailing list CentOS-docs@centos.org http://lists.centos.org/mailman/listinfo/centos-docs
Re: [CentOS-es] Problemas con la tarjeta de red NC375i Quad
El 26 de agosto de 2009 11:07, Germán Suárez germansuar...@gmail.comescribió: Cordial saludo comunidad centos. Paso a comentarles: tengo un servidor HP Proliant ML370 G6 con sistema operativo Centos 4.7 Linux srv01 2.6.9-89.0.9.ELsmp #1 SMP Mon Aug 24 07:56:18 EDT 2009 i686 i686 i386 GNU/Linux Para poder instalar la tarjeta de red como tal fue necesario descargar el controlador desde la pagina de HP y seguir los pasos indicados por el fabricante. No mencionas cual NIC es. Aparentemente, todo funciona bien pero de un momento a otro todos los usuarios quedan sin comunicación hacia el servidor, se ha probado Inmediatamente que te das cuenta que se ha perdido la conectividad a la red, revisa las bitacoras del sistema, por ej: /var/log/messages También, cuando se pierde la conexión; ¿Continua el módulo de la NIC cargado en el kernel? ... ...mmm creo que aquí algo edité mal! ya estoy cansado, una disculpa. ... Después de reiniciar los servicios, nuevamente, ¿que dicen las bitácoras? y de ninguna manera se restablecen los servicios de red, lo unico que sirve es reiniciar la máquina. En tu revisión de bitácoras, busca errores y advertencias relacionadas a tu NIC y con la red en general. Agradezco sus aportes Como otros han sugerido, si te es posible actualiza a centos 5.3, por experiencia se que a veces es necesario mantener la versión. Si es tu caso, ayudanos un poco más para ayudarte mejor. les deseo felicidad, alegria y bienestar para todos Esta parte es verdaderamente innecesaria. atentamente, -- Germán Suárez Sánchez Saludos Ernesto ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Problemas con la tarjeta de red NC375i Quad
El 30 de agosto de 2009 03:09, Ernesto Celis celisdelafue...@gmail.comescribió: El 26 de agosto de 2009 11:07, Germán Suárez germansuar...@gmail.comescribió: Cordial saludo comunidad centos. Paso a comentarles: tengo un servidor HP Proliant ML370 G6 con sistema operativo Centos 4.7 Linux srv01 2.6.9-89.0.9.ELsmp #1 SMP Mon Aug 24 07:56:18 EDT 2009 i686 i686 i386 GNU/Linux Para poder instalar la tarjeta de red como tal fue necesario descargar el controlador desde la pagina de HP y seguir los pasos indicados por el fabricante. No mencionas cual NIC es. Oops! después de Enviar vi el tema del correo, ahí está la NIC. :) Aparentemente, todo funciona bien pero de un momento a otro todos los usuarios quedan sin comunicación hacia el servidor, se ha probado Inmediatamente que te das cuenta que se ha perdido la conectividad a la red, revisa las bitacoras del sistema, por ej: /var/log/messages También, cuando se pierde la conexión; ¿Continua el módulo de la NIC cargado en el kernel? ... ...mmm creo que aquí algo edité mal! ya estoy cansado, una disculpa. ... Después de reiniciar los servicios, nuevamente, ¿que dicen las bitácoras? y de ninguna manera se restablecen los servicios de red, lo unico que sirve es reiniciar la máquina. En tu revisión de bitácoras, busca errores y advertencias relacionadas a tu NIC y con la red en general. Agradezco sus aportes Como otros han sugerido, si te es posible actualiza a centos 5.3, por experiencia se que a veces es necesario mantener la versión. Si es tu caso, ayudanos un poco más para ayudarte mejor. les deseo felicidad, alegria y bienestar para todos Esta parte es verdaderamente innecesaria. atentamente, -- Germán Suárez Sánchez Saludos Ernesto Saludos Ernesto ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Se me apaga la máquina de virtualbox .
El 25 de agosto de 2009 07:53, Monica BM monica...@yahoo.es escribió: Buenas tardes: Tengo la última versión de VB (3.0.4) en mi CentOS 5.2, mi problema es que he ido a crear una máquina de disco dinámico de 20 GB. ¿Por que piensas que el problema es este? Un disco virtual dinámico de 20GB. ¿Si es de tamaño fijo, no sucede? Pues bien, se me instala correctamente y le empiezo a instalar las actualziaciones, y una vez instalo el SP3, la máquina derrepente a los pocos minutos o segundos se apaga. Si windows se instala correctamente, corre durante algunos minutos antes que inicies la instalación del SP3 y es entonces cuando se apaga. ¿No crees que el problema está en el SP3 o VirtualBox? No en CentOS. Por temas de seguridad necesito el SP3, pero he creado anteriormente máquinas de 10 Gb y no me han dado ningún problema. Estas máquinas de 10GB, ¿también tienen instalado SP3? En los Logs, ni de virtualbox ni de centos encuentro nada. ¿Ya preguntaste en los canales de ayuda (listas, irc, foros) de VirtualBox? Si tenéis alguna idea al respecto, agradecida quedo. No tengo idea de cual sea tu problema, pero si se que no es CentOS, hasta hace poco yo ejecutaba Windows XP sp3 en esta versión de VirtualBox que mencionas con host Centos 5.3. No se tu caso, pero mi instalación de Windows XP ya tiene su tiempo y he venido actualizando VirtualBox desde que cree esta máquina virtual, en febrero de 2009. Y si te preocupa tanto la seguridad en Windows, para actualizarlo al más reciente service pack, ¿por que no corres Centos 5.3? Linux puede llegar a ser tan vulnerable como Windows si no se administra correctamente. pd: Estoy probando a crearla en otro equipo con una versión anterior de VB. Un saludo. Saludos Ernesto ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
Re: [CentOS-es] Se me apaga la máquina de virtualbox .
El 25 de agosto de 2009 07:53, Monica BM monica...@yahoo.es escribió: Buenas tardes: Tengo la última versión de VB (3.0.4) en mi CentOS 5.2, mi problema es que he ido a crear una máquina de disco dinámico de 20 GB. Pues bien, se me instala correctamente y le empiezo a instalar las actualziaciones, y una vez instalo el SP3, la máquina derrepente a los pocos minutos o segundos se apaga. Talvez es un pantallaso azul, como estan configurado el sonido, etc? Hiciste un formato limpio? Por temas de seguridad necesito el SP3, pero he creado anteriormente máquinas de 10 Gb y no me han dado ningún problema. En los Logs, ni de virtualbox ni de centos encuentro nada. Si tenéis alguna idea al respecto, agradecida quedo. pd: Estoy probando a crearla en otro equipo con una versión anterior de VB. Un saludo. ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es Atentamente Andrés Genovez Tobar / Sistemas COMERCIAL SALVADOR PACHECO MORA S.A. / DESDE 1945 Tecnologías Cuenca, Luis Cordero 9-70 y Gran Colombia Teléfono. 593-7-2842388 ext 408 Fax. 593-7-2842388 ext 120 Celular 593-97670874 593-96816996 Alegro Mail:ageno...@cspmsa.com Personal: andresgeno...@gmail.com www.cspmsa.com www.crice.org ___ CentOS-es mailing list CentOS-es@centos.org http://lists.centos.org/mailman/listinfo/centos-es
[CentOS] Upgrading Centos 5.3 23Bit - 64Bit
Hi, has anybody done an upgrade from an installed 32bit version to a 64bit? If so, how? Installing the 64bit version from scratch is an option, but I'm interested also, if an upgrade is possible. Thanks and best regards, Götz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] kernel-2.6.18-128.7.1.el5.i686 update breaks AMD onboard sound
On Sat, 2009-08-29 at 20:06 -0400, Mike A. Harris wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 MHR wrote: On Sat, Aug 29, 2009 at 6:06 AM, Mike A. Harrismhar...@mharris.ca wrote: The new kernel-2.6.18-128.7.1.el5.i686 kernel breaks audio support on my onboard audio on an AMD Solo motherboard. 00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) I have this on my ECS GeForce6100PM-M2 w/AMD 64x2 7750: 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) No new problems with sound on the 2.6.18-128.7.1.el5.x86_64 kernel (I know, it's the 64-bit kernel, not your 32-bit one). I have other, older problems related to SeaMonkey 2.0a3, but that's not related. That's a useful datapoint nonetheless, thanks! It's much better if it's limited to a specific piece of hardware or subset of hardware than to be widespread... even if it makes it harder to track down. ;o) Curiosity killed the cat, so I went and looked at the config files in /boot for the latest 3 versions. No changes shown there for AC97 or 8111 stuff. So now it sounds like either a loadable module-related problem, either in the module itself or the modprobe conf. I wonder if some parameter change is needed. Thanks for the response. - -- Mike A. Harris snip sig stuff -- Bill ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Upgrading Centos 5.3 23Bit - 64Bit
Götz Reinicke schrieb: Hi, has anybody done an upgrade from an installed 32bit version to a 64bit? If so, how? Installing the 64bit version from scratch is an option, but I'm interested also, if an upgrade is possible. Thanks and best regards, Götz Generally a fresh re-install is clearly recommended. But what you could test (with a full valid backup) is following: yum install $(rpm -qa --qf '%{name}.%{arch}\n' | grep i386 | sed -e 's/i386/x86_64/g') And additionally to install those packages as x86_64 arch which are installed as i686 arch already. if you have a file /etc/rpm/platform, then adjust it or delete it. Once all x86_64 packages required installed and kernel grub proper, reboot. The command arch should print out x86_64 if I did not miss a detail others on this list may know. You then can yum remove the ix86 rpms. I did not test this. Act with care and a backup. Alexander ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] using Linux as a NAS / SAN device
On Sat, Aug 29, 2009 at 5:46 PM, Les Mikeselllesmikes...@gmail.com wrote: Rudi Ahlers wrote: But the one piece of of the puzzle that I don't understand, will a self-build-Linux NAS device, or even Openfiler / FreeNAS give us that kind of uptime. High quality servers running an enterprise linux version can give you the same uptime as dedicated hardware if you are comfortable with not doing updates. For example I still have a RH 7.3 based box running that has only been down a few minutes in about 7 years (had to move it) but I wouldn't try that with anything exposed to the internet. I did replace several drives and rebuild the raids over that time - and it is probably about to die of old age soon. But surely CentOS, or other free / non-enterprise linux's can do the same? I've seen NAS devices running Debian, so CentOS should be able to deliver the same performance / reliability ? Sure, CentOS is as good as it gets. I was just using my oldest still-running system as an example - and it is well firewalled so I haven't been forced to upgrade it for security reasons. You just need to stick to distributions that emphasize stability and in most situations you'll want some scheduled downtime to do updates that might require reboots. But even dedicated hardware will sometimes have required updates. -- Les Mikesell lesmikes...@gmail.com ___ Thanx for all the input, it has helped me a lot. Now I just need to convince my partner to use a Linux based NAS :) Openfiler has also been doing quite well for me, as well as FreeNAS, so it's a tough choice - both of these run out of the box what I need, but with my own NAS device, I could run a few other things (Apache + PHP + MySQL) as well. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
what is your purpose with this Level? I'm asking because I had done some raid level tests some time ago with hardware raid controllers/systems from 3ware, sun and iscsi-raidsystems and some softwareraid setups. The purpose of using RAID 10 is, of course, performance coupled with full redundancy. I haven't seen significant performance differences using different levels. (I'm not comparing the controllers.) Did you test RAID 10 also? I am using software RAID 10 with CentOS 5.3 and I surely did see a *huge* performance increase with RAID 10 compared to RAID 1 only. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Miguel Medalha schrieb: what is your purpose with this Level? I'm asking because I had done some raid level tests some time ago with hardware raid controllers/systems from 3ware, sun and iscsi-raidsystems and some softwareraid setups. The purpose of using RAID 10 is, of course, performance coupled with full redundancy. I haven't seen significant performance differences using different levels. (I'm not comparing the controllers.) Did you test RAID 10 also? I am using software RAID 10 with CentOS 5.3 and I surely did see a *huge* performance increase with RAID 10 compared to RAID 1 only. I tested 1+0 vers 0+1 vers 5 on the 3ware, the sun build in raid system and using softwareraid on an other (older) server. On the iscsi systems and the 3ware controller I tested raid 5 vers. 6 as well. May be I should have mentioned that. My conclusion on my systems was: Level 5 is the best concerning performance/capacity. Regards, Götz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Aug 30, 2009, at 1:02 PM, Götz Reinicke goetz.reini...@filmakademie.d e wrote: Miguel Medalha schrieb: what is your purpose with this Level? I'm asking because I had done some raid level tests some time ago with hardware raid controllers/ systems from 3ware, sun and iscsi-raidsystems and some softwareraid setups. The purpose of using RAID 10 is, of course, performance coupled with full redundancy. I haven't seen significant performance differences using different levels. (I'm not comparing the controllers.) Did you test RAID 10 also? I am using software RAID 10 with CentOS 5.3 and I surely did see a *huge* performance increase with RAID 10 compared to RAID 1 only. I tested 1+0 vers 0+1 vers 5 on the 3ware, the sun build in raid system and using softwareraid on an other (older) server. On the iscsi systems and the 3ware controller I tested raid 5 vers. 6 as well. May be I should have mentioned that. My conclusion on my systems was: Level 5 is the best concerning performance/capacity. Then you were only testing sequential io an that only gets you so far. For random io nothing beats RAID10. -Ross ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Götz Reinicke wrote: I am using software RAID 10 with CentOS 5.3 and I surely did see a *huge* performance increase with RAID 10 compared to RAID 1 only. I tested 1+0 vers 0+1 vers 5 on the 3ware, the sun build in raid system and using softwareraid on an other (older) server. On the iscsi systems and the 3ware controller I tested raid 5 vers. 6 as well. May be I should have mentioned that. My conclusion on my systems was: Level 5 is the best concerning performance/capacity. That's very strange, considering what the drives physically have to do for raid 5, especially on small writes. Did you have a very large number of drives in the array? -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Götz Reinicke wrote: Level 5 is the best concerning performance/capacity. raid-5 performs very poorly on random writes, common to database servers. it also has long rebuild times which increases the possibility of a double fault. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] setup iptables to allow forwarding through eth1
I have a fresh installed CentOS 5.3 server which should route traffic between two networks like this: network A (Internet) -- eth0 (default gw) : server : eth1 -- network B (LAN) I have set in sysctl.conf net.ipv4.ip_forward = 1 and routing works fine like this. But when I switch on the iptables service (with default setup, configured when installing the server), routing stops working (or at least I cannot ping a server in network A from network B). I guess the firewall is stopping it, so I read http://www.centos.org/docs/5/html/5.2/Deployment_Guide/s1-firewall-ipt-fwd.html and issued the commands # iptables -A FORWARD -i eth1 -j ACCEPT # iptables -A FORWARD -o eth1 -j ACCEPT but that did not help. So I am asking: what is the correct iptables command to make forwarding work? Regards, Peter ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 5:53 PM, Oliver Ransomoli...@ransom.com.au wrote: On 31/08/2009, at 1:18 AM, Rudi Ahlers wrote: Hi, Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. Hi Rudi RAID 10 and RAID 1+0 are the same thing. See here: http://en.wikipedia.org/wiki/Nested_RAID_levels#RAID_10_.28RAID_1.2B0.29 or here: http://en.wikipedia.org/wiki/Non-standard_RAID_levels#Linux_MD_RAID_10 Hi Oliver, It's not the same thing :) Although they work, and do the same, the installer CD mdadm needs to support it. The specific appliance that I want to install, doesn't support RAID 10, so I need to install RAID 1 + RAID 0, i.e. setting 2x RAID 1 mirrors, and then stripe then in RAID0 - but once the first 1 mirrors are setup, I can't stripe them. I've seen people use LVM to add them to one volume, but the installer doesn't see to like that either. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
2009/8/30 Götz Reinicke goetz.reini...@filmakademie.de: Rudi Ahlers schrieb: Hi, Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. Hi, what is your purpose with this Level? I'm asking because I had done some raid level tests some time ago with hardware raid controllers/systems from 3ware, sun and iscsi-raidsystems and some softwareraid setups. I haven't seen significant performance differences using different levels. (I'm not comparing the controllers.) Regards, Götz ___ With the limited resources (motherboard supports 2x SATA 4x IDE - but I don't want to use more than 2 IDE HDD's), and small form factor chassis, I would rather sacrifice less space (460GB on 4x 250GB HDD's) and run RAID 10 for higher reliability speed, then run RAID 5 and have higher risk of complete data loss. RAID 10 can suffer 2 drive failures, while RAID 5 only one. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Rudi Ahlers wrote: Hi Oliver, It's not the same thing :) Although they work, and do the same, the installer CD mdadm needs to support it. The specific appliance that I want to install, doesn't support RAID 10, so I need to install RAID 1 + RAID 0, i.e. setting 2x RAID 1 mirrors, and then stripe then in RAID0 - but once the first 1 mirrors are setup, I can't stripe them. I've seen people use LVM to add them to one volume, but the installer doesn't see to like that either Hmmm... 'specific appliance'. This doesn't sound like you are installing CentOS. This makes it *really* hard for us to help you since we have absolutely no idea what you are actually doing. ;) A) What are you actually doing? B) Do you have to have RAID10 during install or is it sufficient that you can build a data 'drive' after install? -- Benjamin Franz ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Although they work, and do the same, the installer CD mdadm needs to support it. The specific appliance that I want to install, doesn't support RAID 10, so I need to install RAID 1 + RAID 0, i.e. setting 2x RAID 1 mirrors, and then stripe then in RAID0 - but once the first 1 mirrors are setup, I can't stripe them. Aren't you using CentOS, then? You didn't tell us that... My answer was based on the assumption that you were talking about CentOS... ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 9:10 PM, Jerry Franzjfr...@freerun.com wrote: Rudi Ahlers wrote: Hi Oliver, It's not the same thing :) Although they work, and do the same, the installer CD mdadm needs to support it. The specific appliance that I want to install, doesn't support RAID 10, so I need to install RAID 1 + RAID 0, i.e. setting 2x RAID 1 mirrors, and then stripe then in RAID0 - but once the first 1 mirrors are setup, I can't stripe them. I've seen people use LVM to add them to one volume, but the installer doesn't see to like that either Hmmm... 'specific appliance'. This doesn't sound like you are installing CentOS. This makes it *really* hard for us to help you since we have absolutely no idea what you are actually doing. ;) A) What are you actually doing? B) Do you have to have RAID10 during install or is it sufficient that you can build a data 'drive' after install? -- Benjamin Franz ___ heh, I was a bit hesitant to say what it is, but it's fine I guess - seeing as my previous post dealt on the matter of NAS devices :) I'm installing Openfiler 2.3, which looks very very similar to the CentOS installer. My reason for RAID 1+0 (like I said it doesn't support RAID10) is for the higher level of redundancy speed, and I would like to utilize the drives to their max, I've setup the /boot on sda1 sdc1 (100MB each) on RAID 1, and then configured sda2, sdb2, sdc2, sdd2 as 4GB swap each (no RAID), then the remainder on sda3, sdb3, sdc3 sdd3 as 2x RAID 1 mirrors - i.e. sda3 sdc3 on /dev/md2 sdb3 sdd3 on /dev/md3. Yet, I can't create another RAID, i.e. /dev/md4 of md2 md3 combined, nor can I tell the LVM setup to span md2 md3 into the same volume. So, now I'm stuck. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 9:15 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: Although they work, and do the same, the installer CD mdadm needs to support it. The specific appliance that I want to install, doesn't support RAID 10, so I need to install RAID 1 + RAID 0, i.e. setting 2x RAID 1 mirrors, and then stripe then in RAID0 - but once the first 1 mirrors are setup, I can't stripe them. Aren't you using CentOS, then? You didn't tell us that... My answer was based on the assumption that you were talking about CentOS... ___ No, I'm using Openfiler. To make a long story short, the CentOS 5.3 DVD that I have with me right now is corrupt, and then new one that I downloaded yesterday is corrupt as well, I think our ISP's cache is busted. So, I want to setup 1 of 2 servers with Openfiler (as a proof of concept), and then the 2nd one with CentOS 5.3. But, the idea is to download the missing / corrupt CentOS installer libs from another repository once the Openfiler server is up running. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
This page from openfiler.com clearly states the following: Openfiler supports RAID 0, RAID 1, RAID 5, RAID 6 and RAID 10. http://www.openfiler.com/products/openfiler-architecture ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 9:44 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: This page from openfiler.com clearly states the following: Openfiler supports RAID 0, RAID 1, RAID 5, RAID 6 and RAID 10. http://www.openfiler.com/products/openfiler-architecture ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos Yet, I can't setup the RAID 10 they talk about, I only have RAID0, RAID1, RAID5 RAID6 in the setup options, which is why I'm thinking of doing this another way. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] centos 5.3 with dkms-nvidia-x11-drv and gnome power manager sleep
Hi all, On my ThinkPad T61, I am trying to get gnome power manager's sleep function to work properly. When I bring my machine back up after sleep, I end up with just a black screen and nothing responding.. no capslock light when I hit capslock for example. I am running the latest nvidia driver from rpmforge (I'm suspecting the nvidia driver isn't playing nice). With Ubuntu I had to make a change in /usr/share/hal/fdi/information/10freedesktop/20-video-quirk-pm-el5-lenovo.fdi to get it to work. This, unfortunately, didn't help in CentOS. 'echo mem /sys/power/state' seems to work properly - the machine actually comes back up. Whatever method G-P-M is using is not. Can I make G-P-M use that command to suspend? Or any ideas on how to make G-P-M's method work? Thanks, Ryan ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Then maybe there is something wrong with your partitioning scheme or even physical layout. What drives do you have and how are they partitioned? How are they physically connected? I beg your pardon, I didn't see your previous post with the above information. At this point, I think you should undo the RAID 1 groups and revert to the 4 raw partitions marked as Linux Software Raid. Then try to create a RAID 10 group. If the guys from openfiler say that it is possible... I see no reasons to doubt them. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] A couple questions about Wine
VirtualBox works great but, since I only really use one Windows program (an older, specialized word processor called Movie Magic Screenwriter), I'm thinking of using Wine to run it in CentOS and getting rid of the Windows virtual machine. But a couple questions: 1) If I run Wine, do I introduce security or performance issues? 2) Is there any difference between Michael Harris' Wine repository and the ones available through... wherever yum is picking it up? (Actually it looks like it has two or three versions listed.) Thanks for any recommendations. I like VirtualBox, but it seems like overkill. -- RonB -- Using CentOS 5.3 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 9:53 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: Yet, I can't setup the RAID 10 they talk about, I only have RAID0, RAID1, RAID5 RAID6 in the setup options, which is why I'm thinking of doing this another way. Then maybe there is something wrong with your partitioning scheme or even physical layout. What drives do you have and how are they partitioned? How are they physically connected? ___ Sure, that's the first thing to check :) I have 4x 250GB HDD's, and I partitioned them as follows: /dev/sda1 - 100MB type software RAID /dev/sda2 - 4096MB type swap /dev/sda3 - 240GB type software RAID /dev/sdb1 - 100MB type software RAID /dev/sdb2 - 4096MB type swap /dev/sdb3 - 240GB type software RAID /dev/hdb1 - 100MB type software RAID /dev/hdb2 - 4096MB type swap /dev/hdb3 - 240GB type software RAID /dev/hdd1 - 100MB type software RAID /dev/hdd2 - 4096MB type swap /dev/hdd3 - 240GB type software RAID Now, from here I should have been able to create a RAID 10 device from /sda3, sdb3, hdb3, hdd3 - but RAID 10 isn't available. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 9:57 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: Then maybe there is something wrong with your partitioning scheme or even physical layout. What drives do you have and how are they partitioned? How are they physically connected? I beg your pardon, I didn't see your previous post with the above information. At this point, I think you should undo the RAID 1 groups and revert to the 4 raw partitions marked as Linux Software Raid. Then try to create a RAID 10 group. If the guys from openfiler say that it is possible... I see no reasons to doubt them. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos There is no option to setup RAID 10. But, let's get back to my previous request, How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Rudi Ahlers wrote: On Sun, Aug 30, 2009 at 9:50 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: This page from openfiler.com clearly states the following: Openfiler supports RAID 0, RAID 1, RAID 5, RAID 6 and RAID 10. http://www.openfiler.com/products/openfiler-architecture The page even shows the dialog box to create a RAID 10 group! ___ What I could gather, is that the particular setup is only available one I have it setup, meaning I can't have RAID 10 running on the underlying OS. I don't know if this makes sense, but to get their RAID10, I first need to install it, then use the web interface to setup RAID 10. Instead I would like to have openfiler running on the RAID 10 setup as well. You are probably better off if you don't mix the installed OS with the partitions you want to export, so you would use a small raid1 for the OS, then add everything else after it is up and running. I'd do it that way for other distributions too, even if I eventually want /home or /var on different raid partitions. It is easy enough to mount the new space under a temporary name, copy over the existing contents, rename the old directories and set up fstab to mount the new ones when you reboot. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
I don't know if this makes sense, but to get their RAID10, I first need to install it, then use the web interface to setup RAID 10. Instead I would like to have openfiler running on the RAID 10 setup as well. I don't think that you have a significant gain by doing so. Aren't you being a little too rigid there? It seems to me that it makes much more sense to install the OS in a separate partition, maybe on RAID1, and then create a RAID10 for your data with the help of the openfiler interface. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
There is no option to setup RAID 10. But, let's get back to my previous request, How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? There is no option to setup RAID 10 because you are trying to create an unsupported configuration. You should separate the OS from the data area. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Rudi Ahlers wrote: On Sun, Aug 30, 2009 at 9:57 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: Then maybe there is something wrong with your partitioning scheme or even physical layout. What drives do you have and how are they partitioned? How are they physically connected? I beg your pardon, I didn't see your previous post with the above information. At this point, I think you should undo the RAID 1 groups and revert to the 4 raw partitions marked as Linux Software Raid. Then try to create a RAID 10 group. If the guys from openfiler say that it is possible... I see no reasons to doubt them. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos There is no option to setup RAID 10. But, let's get back to my previous request, How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? Have you tried this the obvious way: using mdadm create for each step, giving the md devices created in the first step as the partitions for the RAID0 device? But out of curiosity, why would you consider installing a CentOS 4.x now? -- Les Mikesell lesmikes...@gmail ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] setup iptables to allow forwarding through eth1
Peter Peltonen wrote: I have a fresh installed CentOS 5.3 server which should route traffic between two networks like this: network A (Internet) -- eth0 (default gw) : server : eth1 -- network B (LAN) I have set in sysctl.conf net.ipv4.ip_forward = 1 and routing works fine like this. But when I switch on the iptables service (with default setup, configured when installing the server), routing stops working (or at least I cannot ping a server in network A from network B). I guess the firewall is stopping it, so I read http://www.centos.org/docs/5/html/5.2/Deployment_Guide/s1-firewall-ipt-fwd.html and issued the commands # iptables -A FORWARD -i eth1 -j ACCEPT # iptables -A FORWARD -o eth1 -j ACCEPT but that did not help. So I am asking: what is the correct iptables command to make forwarding work? Regards, Peter ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos my iptables like that: * iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE * iptables --append FORWARD --in-interface eth1 -j ACCEPT Regards Firdaus i'm come from indonesia. :) ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] gtk+-2.x?
Hello, I'm trying to install a package that requires the gtk+-2.1.x package. I've installed the following groups in preparation, development tools, gnome-desktop, and am not seeing the rpm, i thought it was contained within another. Does anyone know where i can obtain this rpm? Thanks. Dave. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Sun, Aug 30, 2009 at 10:57 PM, Les Mikeselllesmikes...@gmail.com wrote: Rudi Ahlers wrote: On Sun, Aug 30, 2009 at 9:57 PM, Miguel Medalhamiguelmeda...@sapo.pt wrote: Then maybe there is something wrong with your partitioning scheme or even physical layout. What drives do you have and how are they partitioned? How are they physically connected? I beg your pardon, I didn't see your previous post with the above information. At this point, I think you should undo the RAID 1 groups and revert to the 4 raw partitions marked as Linux Software Raid. Then try to create a RAID 10 group. If the guys from openfiler say that it is possible... I see no reasons to doubt them. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos There is no option to setup RAID 10. But, let's get back to my previous request, How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? Have you tried this the obvious way: using mdadm create for each step, giving the md devices created in the first step as the partitions for the RAID0 device? But out of curiosity, why would you consider installing a CentOS 4.x now? -- Les Mikesell lesmikes...@gmail ___ Les, I have used SME Server 7.3 for a long time, with great success which runs on CentOS 4.7, so I would like to be able todo it with SME as well, since it doesn't support RAID 10. I have tried mdam in the shell, but was told RAID 10 wasn't supported. I forgot the exact messages, but it was something like invalid RAID level. I could set RAID 5 6 though. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] A couple questions about Wine
Ron Blizzard wrote: VirtualBox works great but, since I only really use one Windows program (an older, specialized word processor called Movie Magic Screenwriter), I'm thinking of using Wine to run it in CentOS and getting rid of the Windows virtual machine. But a couple questions: 1) If I run Wine, do I introduce security or performance issues? Security...no...performance...is that with regards to the rest of the os or the program or in comparison with having Windows in a sandbox like Virtualbox? 2) Is there any difference between Michael Harris' Wine repository and the ones available through... wherever yum is picking it up? (Actually it looks like it has two or three versions listed.) No comment there but if you run/install anything above wine 1.0 it should be that best deal you can get for running Windows programs under Linux. Thanks for any recommendations. I like VirtualBox, but it seems like overkill. If the program runs under Wine, then yeah...overkill. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On Mon, Aug 31, 2009 at 3:12 AM, natecen...@linuxpowered.net wrote: Rudi Ahlers wrote: How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? Setup both RAID-1 arrays then stripe them with LVM? http://www.redhat.com/magazine/009jul05/features/lvm2/ Though I'd prefer to opt for a hardware raid card, I think you said you had SATA disks, which if that's the case would go for a 3ware. nate ___ Nate, this is what I was looking for :) I'm going away for 2 weeks now, but will definitely give it a shot as soon as I can, -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
How would one setup RAID 1+0 (i.e. 2x mirror'ed RAID1's and then a RAID 0 on top of it) on say CentOS 4.6 ? Setup both RAID-1 arrays then stripe them with LVM? http://www.redhat.com/magazine/009jul05/features/lvm2/ Though I'd prefer to opt for a hardware raid card, I think you said you had SATA disks, which if that's the case would go for a 3ware. nate ___ Nate, this is what I was looking for :) I'm going away for 2 weeks now, but will definitely give it a shot as soon as I can, I would NOT do that. You should like the md layer handle all things raid and let lvm do just volume management. To create a raid1+0 array, you first create the mirrors and then you create a striped array that consists of the mirror devices. There is another raid10 module that does its own thing with regards to 'raid10', is not supported by the installer and does not necessarily behave like raid1+0. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] gcc: fork: can not allocate memory
Hello, The above is on a CentOS 5.3 machine, a vps actually. I started seeing it a few weeks ago when i was trying to get an ssh-key program called keychain going. It required an entry in ~/.bash_profile after that i started seeing the above error and compiles kept failing or tasks wouldn't complete. I commented out the lines that started keychain, and for measure rebooted the box. For the second time in the past 24 hours i'm seeing this error again. I've never seen it before and am open to suggestions. Thanks a lot. Dave. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Miguel Medalha wrote: Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. As Oliver Ransom replied to you, RAID 1+0 (not to be confused with RAID 0+1) is RAID 10. mdadm has direct support for RAID 10. I am using it on CentOS 5.3 and it works really well. RAID 1+0 is NOT RAID 10. raid 1+0 is achieved using the combination of raid1 and raid0 personalities. Raid10 is a different animal and has its own personality. (personality as reported by 'cat /proc/mdstat' aka md modules) raid10 was only introduced in 2.6.9 and Oliver's link clearly shows that it is 'Non-standard' or not raid1+0. You might be interested in this article: Why is RAID 1+0 better than RAID 0+1? http://aput.net/~jheiss/raid10/ The whole raid1+0 or raid0+1 argument was really only relevant in the days of pata when one disk dying on one channel might take out the other disk on the same channel or the controller. Now that we are using SATA, it is MOOT. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
On 31/08/2009, at 1:11 PM, Christopher Chan wrote: Miguel Medalha wrote: Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. As Oliver Ransom replied to you, RAID 1+0 (not to be confused with RAID 0+1) is RAID 10. mdadm has direct support for RAID 10. I am using it on CentOS 5.3 and it works really well. RAID 1+0 is NOT RAID 10. raid 1+0 is achieved using the combination of raid1 and raid0 personalities. Raid10 is a different animal and has its own personality. (personality as reported by 'cat /proc/mdstat' aka md modules) raid10 was only introduced in 2.6.9 and Oliver's link clearly shows that it is 'Non-standard' or not raid1+0. RAID 10 and 1+0 are referred to interchangeably in the Nested_RAID_levels article, RAID 1+0, sometimes called RAID 10, or RAID 10. I'm a bit confused now! You might be interested in this article: Why is RAID 1+0 better than RAID 0+1? http://aput.net/~jheiss/raid10/ The whole raid1+0 or raid0+1 argument was really only relevant in the days of pata when one disk dying on one channel might take out the other disk on the same channel or the controller. Now that we are using SATA, it is MOOT. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] looking for RAID 1+0 setup instructions?
Oliver Ransom wrote: On 31/08/2009, at 1:11 PM, Christopher Chan wrote: Miguel Medalha wrote: Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. As Oliver Ransom replied to you, RAID 1+0 (not to be confused with RAID 0+1) is RAID 10. mdadm has direct support for RAID 10. I am using it on CentOS 5.3 and it works really well. RAID 1+0 is NOT RAID 10. raid 1+0 is achieved using the combination of raid1 and raid0 personalities. Raid10 is a different animal and has its own personality. (personality as reported by 'cat /proc/mdstat' aka md modules) raid10 was only introduced in 2.6.9 and Oliver's link clearly shows that it is 'Non-standard' or not raid1+0. RAID 10 and 1+0 are referred to interchangeably in the Nested_RAID_levels article, RAID 1+0, sometimes called RAID 10, or RAID 10. I'm a bit confused now! When it comes to Linux software raid, the raid10 module does things differently from what you get from a combination of raid1 + raid0. When it comes to hardware raid, raid10 is very likely to mean raid1+0. The problem is that that chum behind the raid10 module chose a name that was not at that time strictly defined and people would use raid10 in their articles to mean raid1+0. The raid10 module can do something similar to what you get with raid1+0 but it can also do completely different things in the way it handles data. You can for example have three disks and get a 'raid10' array. You do not have to have an even number of disks to create a 'raid10' device with the raid10 module. http://neil.brown.name/blog/20040827225440 BTW, the raid10 module does not have the same reputation as the raid1 and raid0 modules...even the raid5 module did not have a good reputation five years ago sometime around when raid10 was introduced and the raid5 module has been around for some time then. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] log rotation not writing to new logs
--- On Sun, 8/30/09, Dave dave.meh...@gmail.com wrote: Hello, I've got a centos 5.3 machine that is running services http and ftp whih are the two services i've noticed this on. When log rotation happens the old logs are renamed and compressed, but new logs httpd and pure-ftpd have zero lengths. From that poing log writing is not working. I've tried shutting down rsyslog and both httpd and pure-ftpd and restarting them, this is not working. I am open to suggestions. Thanks. Dave. Dave, please post your log rotation configuration. Matthias ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] mysql error
Hi List i'm trying to setup my sever but in my terimal all i seam get is this message but cant go on . could someone help us out many thx's Mike yum install mysql mysql-server Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.optus.net * updates: mirror.optus.net * addons: mirror.optus.net * extras: mirror.optus.net Setting up Install Process Parsing package install arguments Package mysql-5.0.45-7.el5.i386 already installed and latest version Package mysql-server-5.0.45-7.el5.i386 already installed and latest version Nothing to do [r...@localhost bcm]# chkconfig --levels 235 mysqld on bash: chkconfig: command not found [r...@localhost bcm]# /etc/init.d/mysqld start Starting MySQL:[ OK ] [r...@localhost bcm]# mysqladmin -ucountry mysqladmin Ver 8.41 Distrib 5.0.45, for redhat-linux-gnu on i686 Copyright (C) 2000-2006 MySQL AB This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL license Administration program for the mysqld daemon. Usage: mysqladmin [OPTIONS] command command -c, --count=# Number of iterations to make. This works with -i (--sleep) only. -#, --debug[=name] Output debug log. Often this is 'd:t:o,filename'. -f, --force Don't ask for confirmation on drop database; with multiple commands, continue even if an error occurs. -C, --compress Use compression in server/client protocol. --character-sets-dir=name Directory where character sets are. --default-character-set=name Set the default character set. -?, --help Display this help and exit. -h, --host=name Connect to host. -p, --password[=name] Password to use when connecting to server. If password is not given it's asked from the tty. -P, --port=#Port number to use for connection. --protocol=name The protocol of connection (tcp,socket,pipe,memory). -r, --relative Show difference between current and previous values when used with -i. Currently works only with extended-status. -O, --set-variable=name Change the value of a variable. Please note that this option is deprecated; you can set variables directly with --variable-name=value. -s, --silentSilently exit if one can't connect to server. -S, --socket=name Socket file to use for connection. -i, --sleep=# Execute commands again and again with a sleep between. --ssl Enable SSL for connection (automatically enabled with other flags). Disable with --skip-ssl. --ssl-ca=name CA file in PEM format (check OpenSSL docs, implies --ssl). --ssl-capath=name CA directory (check OpenSSL docs, implies --ssl). --ssl-cert=name X509 cert in PEM format (implies --ssl). --ssl-cipher=name SSL cipher to use (implies --ssl). --ssl-key=name X509 key in PEM format (implies --ssl). --ssl-verify-server-cert Verify server's Common Name in its cert against hostname used when connecting. This option is disabled by default. -u, --user=name User for login if not current user. -v, --verbose Write more information. -V, --version Output version information and exit. -E, --vertical Print output vertically. Is similar to --relative, but prints output vertically. -w, --wait[=#] Wait and retry if connection is down. --connect_timeout=# --shutdown_timeout=# Variables (--variable-name=value) and boolean options {FALSE|TRUE} Value (after reading options) - - count 0 force FALSE compress FALSE character-sets-dir(No default value) default-character-set (No default value) host (No default value) port 0 relative FALSE socket(No default value) sleep 0 ssl FALSE ssl-ca(No default value) ssl-capath(No default value) ssl-cert (No default value) ssl-cipher(No default value) ssl-key (No default value) ssl-verify-server-certFALSE user country verbose FALSE vertical FALSE connect_timeout 43200 shutdown_timeout 3600 Default options are read from the following files
Re: [CentOS] mysql error
[r...@localhost bcm]# mysqladmin -ucountry You're getting that because -ucountry isn't a valid flag for mysqladmin. Did you mean to log into the MySQL server as user country? If so put a space after the -u -- Drew Nothing in life is to be feared. It is only to be understood. --Marie Curie ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] mysql error
thax's for that drew i will try that Mike - Original Message - From: Drew drew@gmail.com To: CentOS mailing list centos@centos.org Sent: Monday, August 31, 2009 3:27 PM Subject: Re: [CentOS] mysql error [r...@localhost bcm]# mysqladmin -ucountry You're getting that because -ucountry isn't a valid flag for mysqladmin. Did you mean to log into the MySQL server as user country? If so put a space after the -u -- Drew Nothing in life is to be feared. It is only to be understood. --Marie Curie ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos