[CentOS-virt] Cannot samba mount a remote windows disk
Hi, I would like to mount a remote windows disk as samba share drive but unable to do so on my host node. I tried it on my instances and it works so i am suspecting that perhaps firewall could be blocking it. Right now i see that the iptables for the host node with KVM installed : iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhereudp dpt:domain ACCEPT tcp -- anywhere anywheretcp dpt:domain ACCEPT udp -- anywhere anywhereudp dpt:bootps ACCEPT tcp -- anywhere anywheretcp dpt:bootps Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywherereject-with icmp-port-unreachable REJECT all -- anywhere anywherereject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination Do i need to add anything to allow samba share to work? Thanks! yongsan ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, Sorry to bring this up again. Now i am trying the clonezilla method to downsize one of my VM. I have created a smaller storage volume and added to the VM. I boot up wih clonezilla but have issue cloning the drive over. Should I use Disk-Image or Device-Device? Please advise. Thanks! Yongsan On Mon, Feb 7, 2011 at 3:09 AM, compdoc comp...@hotrodpc.com wrote: Well, I can tell you how I do it. Might help… 1) create a new storage volume of the size you want with Virtual Manager. (Host detailsStorage tab) 2) shut down the VM and add the new volume to the VM ( it now has two virtual drives - the original and the new) 3) boot with clonezilla, clone one drive to the other. Then boot gparted and resize as needed 4) delete both drives from the vm, and then add back the new volume. Boot. 5) keep the old, smaller volume around for a while as backup. When you add a volume, Virtual Manager assigns a device name to it: hda to the first drive, hdb to the second, ect. So, you have to delete them both to get Virtual Manager to assign hda to the new one, otherwise the OS will not be able to boot. ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, Thanks! It works! :) Yongsan On Sun, Mar 13, 2011 at 7:47 PM, compdoc comp...@hotrodpc.com wrote: Sorry to bring this up again. Now i am trying the clonezilla method to downsize one of my VM. I have created a smaller storage volume and added to the VM. I boot up wih clonezilla but have issue cloning the drive over. Should I use Disk-Image or Device-Device? To make it smaller, you need to resize your partition(s) first with gparted, and then use device-device if you have both 'drives' mounted. This clones the drive. Use Disk-Image only if you want to store a copy of the drive to local or remote storage. This creates a file backup of the disk. ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, I have an issue. I have already resize the partition using Gparted. Now how can i resize the actual image size in virtual manager? I do not see any option for me to change the size of the allocated hard disk. Please advise. Thanks! On Wed, Jan 26, 2011 at 6:54 PM, Poh Yong Hwang yong...@gmail.com wrote: Hi, Great! Thanks for the quick response. I will try it out then. Yes. I do have backup for the host as well as the guest nodes. :) Regards yongsan On Wed, Jan 26, 2011 at 6:43 PM, Lorenzo Quatrini lorenzo.quatr...@gmail.com wrote: Poh Yong Hwang ha scritto: Hi, I have two guest vm instance running CentOS 5 with ext3 partition. I will like to reduce 1 VM harddisk space and using the 'release' harddisk space to add onto my second VM. Basically I need to know how can I reduce and increase an ext3 partition in CentOS KVM. I did a search and basically i can do it by booting the VM using Knoppix and use Gparted to reduce and increase the diskspace. I am thinking of the following 1) Boot first VM using Knoppix 2) Reduce the ext3 partition disk size using Gparted 3) Shutdown the VM and resize the diskspace using Virtual Manager 4) Increae the diskspace of the second VM using Virtual Manager 5) Boot up second VM using Knoppix 6) Increase the ext3 partition disk size using Gparted 7) Reboot the second VM As this is the first time i am doing it, will these work? Anyone has experience resiziing their EXT3 partition in KVM environment before? Thanks! Regards yongsan I guess it would work, but just in case remember: do backup beforehand :D Regards Lorenzo ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, Thanks but my issue is i do not have enough diskspace to create another partition of the size that i needed. Is there a way for me to reduce the actual image size? Thanks! On Mon, Feb 7, 2011 at 3:09 AM, compdoc comp...@hotrodpc.com wrote: Well, I can tell you how I do it. Might help… 1) create a new storage volume of the size you want with Virtual Manager. (Host detailsStorage tab) 2) shut down the VM and add the new volume to the VM ( it now has two virtual drives - the original and the new) 3) boot with clonezilla, clone one drive to the other. Then boot gparted and resize as needed 4) delete both drives from the vm, and then add back the new volume. Boot. 5) keep the old, smaller volume around for a while as backup. When you add a volume, Virtual Manager assigns a device name to it: hda to the first drive, hdb to the second, ect. So, you have to delete them both to get Virtual Manager to assign hda to the new one, otherwise the OS will not be able to boot. ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi Kenni, Sorry i might have miss it but if i do a man of qemu-img, i do not see resize option. I only see create, convert, commit and info. Thanks On Mon, Feb 7, 2011 at 3:18 AM, Kenni Lund ke...@kelu.dk wrote: 2011/2/6 Poh Yong Hwang yong...@gmail.com: Hi, Thanks but my issue is i do not have enough diskspace to create another partition of the size that i needed. Is there a way for me to reduce the actual image size? Yes, like I wrote 10 minutes ago: qemu-img resize Best regards Kenni ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, Apologies for the late reply. Here is the result of the command: qemu-img info staging.img image: staging.img file format: raw virtual size: 195G (20971520 bytes) disk size: 196G Yes. I am looking to reduce this size to 100G. Thanks! On Mon, Feb 7, 2011 at 7:35 AM, Thomas Smith theitsm...@gmail.com wrote: I see. So we are looking to decrease the size, not increase it. (I also assumed we were talking about a disk image.) OP, what are you using as the backing storage device? That is, are you using a disk image or a block device? If you are using a disk image, what format is the image? QCOW2? RAW? Something else? * Use qemu-img info disk.img to determine this. Execute this command on the host. If you are using a block device, knowledge of your file system structure (on the host) will be necessary. On Sun, Feb 6, 2011 at 1:14 PM, Kenni Lund ke...@kelu.dk wrote: 2011/2/6 Thomas Smith theitsm...@gmail.com: I am coming into this discussion a little late, so apologies if I ask for any information previously provided. I can help you with this, but I'll need to know the domU's file system layout to do so. Can you send the output of the following commands? * fdisk -l * mount * df -h And if you're using LVM: * vgdisplay * lvdisplay KVM not Xen according to original post - and the partition in the guest has already been resized with gparted, so no reason to perform any more actions within the guest - only thing missing is to resize the qemu image on the host (I assume the OP is using regular file-based images in virt-manager as nothing has been mentioned about this, eg. not iSCSI, NFS, LVM, etc.). Best regards Kenni ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt -- Thomas Smith Cell: 602-882-2917 ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] Resizing EXT3 partition in guest instance CentOS5
Hi, Great! Thanks for the quick response. I will try it out then. Yes. I do have backup for the host as well as the guest nodes. :) Regards yongsan On Wed, Jan 26, 2011 at 6:43 PM, Lorenzo Quatrini lorenzo.quatr...@gmail.com wrote: Poh Yong Hwang ha scritto: Hi, I have two guest vm instance running CentOS 5 with ext3 partition. I will like to reduce 1 VM harddisk space and using the 'release' harddisk space to add onto my second VM. Basically I need to know how can I reduce and increase an ext3 partition in CentOS KVM. I did a search and basically i can do it by booting the VM using Knoppix and use Gparted to reduce and increase the diskspace. I am thinking of the following 1) Boot first VM using Knoppix 2) Reduce the ext3 partition disk size using Gparted 3) Shutdown the VM and resize the diskspace using Virtual Manager 4) Increae the diskspace of the second VM using Virtual Manager 5) Boot up second VM using Knoppix 6) Increase the ext3 partition disk size using Gparted 7) Reboot the second VM As this is the first time i am doing it, will these work? Anyone has experience resiziing their EXT3 partition in KVM environment before? Thanks! Regards yongsan I guess it would work, but just in case remember: do backup beforehand :D Regards Lorenzo ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
[CentOS-virt] KVM instance keep crashing
Hi, I have one KVM instance (centos 5) that keeps crashing and i see the message log with the following: Oct 14 16:24:48 localhost kernel: psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Oct 14 16:24:49 localhost kernel: BUG: soft lockup - CPU#0 stuck for 12s! [ntpd:2363] Oct 14 16:24:49 localhost kernel: CPU 0: Oct 14 16:24:49 localhost kernel: Modules linked in: backupdriver(PU) ipv6 xfrm_nalgo crypto_api autofs4 hidp rfcomm l2cap bluetooth lockd sunrpc talpa_pedevice(U) dm_mirror dm_multipath scsi_dh video backlight sbs power_meter hwmon i2c_ec dell_wmi wmi button battery asus_acpi acpi_memhotplug ac parport_pc lp parport floppy virtio_balloon virtio_pci ide_cd i2c_piix4 virtio_ring 8139too cdrom 8139cp pcspkr i2c_core virtio mii serio_raw dm_raid45 dm_message dm_region_hash dm_log dm_mod dm_mem_cache ata_piix libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd Oct 14 16:24:49 localhost kernel: Pid: 2363, comm: ntpd Tainted: P 2.6.18-194.3.1.el5 #1 Oct 14 16:24:49 localhost kernel: RIP: 0010:[80064b50] [80064b50] _spin_unlock_irqrestore+0x8/0x9 Oct 14 16:24:49 localhost kernel: RSP: 0018:80446ee0 EFLAGS: 0296 Oct 14 16:24:49 localhost kernel: RAX: 02fd RBX: 81007cb46b40 RCX: 81006975b978 Oct 14 16:24:49 localhost kernel: RDX: 0060 RSI: 0296 RDI: 80348e58 Oct 14 16:24:49 localhost kernel: RBP: 80446e60 R08: 81007cb46a70 R09: 0020 Oct 14 16:24:49 localhost kernel: R10: R11: R12: 8005dc8e Oct 14 16:24:49 localhost kernel: R13: 003d R14: 8007820e R15: 80446e60 Oct 14 16:24:49 localhost kernel: FS: 2b3519a1c030() GS:803ca000() knlGS: Oct 14 16:25:06 localhost kernel: CS: 0010 DS: ES: CR0: 8005003b Oct 14 16:25:06 localhost kernel: CR2: 2b4f3abac3d8 CR3: 69726000 CR4: 06e0 Oct 14 16:25:06 localhost kernel: Oct 14 16:25:06 localhost kernel: Call Trace: Oct 14 16:25:06 localhost kernel: IRQ [80209e43] i8042_interrupt+0x92/0x1e9 Oct 14 16:25:06 localhost kernel: [80010bd1] handle_IRQ_event+0x51/0xa6 Oct 14 16:25:07 localhost kernel: [800baec9] __do_IRQ+0xa4/0x103 Oct 14 16:25:07 localhost kernel: [8006ca11] do_IRQ+0xe7/0xf5 Oct 14 16:25:07 localhost kernel: [8005d615] ret_from_intr+0x0/0xa Oct 14 16:25:07 localhost kernel: EOI [8002f73b] dev_queue_xmit+0x0/0x271 Oct 14 16:25:07 localhost kernel: [881987c6] :8139cp:cp_start_xmit+0x4ef/0x511 Oct 14 16:25:07 localhost kernel: [8819842d] :8139cp:cp_start_xmit+0x156/0x511 Oct 14 16:25:07 localhost kernel: [8022eede] dev_hard_start_xmit+0x1b7/0x28a Oct 14 16:25:08 localhost kernel: [8023f0b8] __qdisc_run+0x136/0x1f9 Oct 14 16:25:08 localhost kernel: [8002f88b] dev_queue_xmit+0x150/0x271 Oct 14 16:25:08 localhost kernel: [80031f87] ip_output+0x2ae/0x2dd Oct 14 16:25:08 localhost kernel: [8024d651] ip_push_pending_frames+0x37d/0x465 Oct 14 16:25:08 localhost kernel: [8025daad] udp_push_pending_frames+0x21e/0x243 Oct 14 16:25:08 localhost kernel: [8005297d] udp_sendmsg+0x4d8/0x5ef Oct 14 16:25:08 localhost kernel: [80055336] sock_sendmsg+0xf8/0x14a Oct 14 16:25:09 localhost kernel: [800a0abe] autoremove_wake_function+0x0/0x2e Oct 14 16:25:09 localhost kernel: [80098f3b] __dequeue_signal+0x12d/0x193 Oct 14 16:25:09 localhost kernel: [8009899d] recalc_sigpending+0xe/0x25 Oct 14 16:25:09 localhost kernel: [8009a0db] dequeue_signal+0x47/0xcd Oct 14 16:25:09 localhost kernel: [80070b89] init_fpu+0x62/0x7f Oct 14 16:25:09 localhost kernel: [8006beee] math_state_restore+0x23/0x4c Oct 14 16:25:09 localhost kernel: [8005dde9] error_exit+0x0/0x84 Oct 14 16:25:09 localhost kernel: [802264ac] sys_sendto+0x11c/0x14f Oct 14 16:25:10 localhost kernel: [8006b011] __switch_to+0xfe/0x22f Oct 14 16:25:10 localhost kernel: [80062ff8] thread_return+0x62/0xfe Oct 14 16:25:10 localhost kernel: [80043b84] sys_rt_sigreturn+0x323/0x356 Oct 14 16:25:10 localhost kernel: [8005d28d] tracesys+0xd5/0xe0 Oct 14 16:25:10 localhost kernel: Afterwhich the instance become very sluggish and unresponsive. Please advise what could be the issue. Thanks YongSan ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] How do I reduce a disk size of a particular VM?
Hi, Thanks. Yes I am also using gnome and using VNC to access it. But I could not find a simple way to connect the guest's CD to the ISO file. The option under boot option is only either harddisk, CD or PXE. So how can I connect the guest CD to the ISO file? Thanks! YongSan On Mon, Sep 20, 2010 at 7:18 PM, compdoc comp...@hotrodpc.com wrote: Place the gparted iso file somewhere you can access it from the VM. I would recommend placing it on the Centos server that hosts the VM. I keep all my ISO files in a folder named ISOs. I run the gnome desktop on my servers, so I use VNC to remote control the server. I would run the virt-manager gui to shut down the VM guest, connect the guest’s CD to the iso file, and change the boot options to boot from the CD. Of course, you can do all this from the command line, and I’m sure you can google information of how to do it that way. With gparted, I think you can backup the VM over the network to a share. So, I would first backup the VM, then resize the VM disk with gparted and make sure it boots, then backup the VM again, create a new smaller disk for the guest, and restore the smaller backup image. *From:* centos-virt-boun...@centos.org [mailto: centos-virt-boun...@centos.org] *On Behalf Of *Poh Yong Hwang *Sent:* Monday, September 20, 2010 1:25 AM *To:* Discussion about the virtualization on CentOS *Subject:* Re: [CentOS-virt] How do I reduce a disk size of a particular VM? Hi, I am trying to boot that particular VM which I want to resize using gparted ISO. May I know how can I boot a VM using a ISO file? Thanks! YongSan On Fri, Aug 27, 2010 at 5:30 PM, Victor Padro vpa...@gmail.com wrote: On Fri, Aug 27, 2010 at 4:10 AM, Poh Yong Hwang yong...@gmail.com wrote: Hi, But I would like the diskspace to be release to the hardware node so that i can create another VM as my hardware node is running out of diskspace. I presume that using Gpart only reduce the diskspace on the VM but it will not be release to the hardware node? Thanks! YongSan On Fri, Aug 27, 2010 at 4:58 PM, Victor Padro vpa...@gmail.com wrote: On Fri, Aug 27, 2010 at 3:51 AM, Poh Yong Hwang yong...@gmail.com wrote: Hi, As per subject, is there a way to reduce diskspace for a VM. I have a VM with 200GB but would like to reduce the diskspace to 100GB. Please advise. Thanks! Yongsan ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt Perhaps shriking the partition using gparted inside the VM? Otherwise I can't figure out how to shrink a raw, qcow file under KVM for example... -- Linux User #452368 http://twitter.com/vpadro Everything that irritates us about others can lead us to an understanding of ourselves ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt What are you using to virtualize those VMs? -- Linux User #452368 http://twitter.com/vpadro Everything that irritates us about others can lead us to an understanding of ourselves ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt I can only think of creating a smaller qcow file, clonning using dd the contents of the oversized qcow/raw HD to that newly qcow file...although is not the best solution. Maybe someone else could bring a better solution because there's no much info on KVM just a little under Xen... :( -- Linux User #452368 http://twitter.com/vpadro Everything that irritates us about others can lead us to an understanding of ourselves ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] How do I reduce a disk size of a particular VM?
Hi, Using KVM, qemu. Thanks! Yongsan On Fri, Aug 27, 2010 at 5:30 PM, Victor Padro vpa...@gmail.com wrote: On Fri, Aug 27, 2010 at 4:10 AM, Poh Yong Hwang yong...@gmail.com wrote: Hi, But I would like the diskspace to be release to the hardware node so that i can create another VM as my hardware node is running out of diskspace. I presume that using Gpart only reduce the diskspace on the VM but it will not be release to the hardware node? Thanks! YongSan On Fri, Aug 27, 2010 at 4:58 PM, Victor Padro vpa...@gmail.com wrote: On Fri, Aug 27, 2010 at 3:51 AM, Poh Yong Hwang yong...@gmail.com wrote: Hi, As per subject, is there a way to reduce diskspace for a VM. I have a VM with 200GB but would like to reduce the diskspace to 100GB. Please advise. Thanks! Yongsan ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt Perhaps shriking the partition using gparted inside the VM? Otherwise I can't figure out how to shrink a raw, qcow file under KVM for example... -- Linux User #452368 http://twitter.com/vpadro Everything that irritates us about others can lead us to an understanding of ourselves ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt What are you using to virtualize those VMs? -- Linux User #452368 http://twitter.com/vpadro Everything that irritates us about others can lead us to an understanding of ourselves ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
Re: [CentOS-virt] (KVM) How can I migrate VM in a non shared storage environment?
Hi All, Thanks for all your suggestion. Just a check, if i have a full backup on the server but due to the different specs of the hardware so i am unable to do a bare metal restore, can i just dump all the folders under /var/lib/libvirt which also includes the images folder? Will it work that way? Here is the folders in libvirt: [r...@pop-kvm-web libvirt]# ls boot images iptables network qemu Thanks! yongsan On Tue, Jun 29, 2010 at 12:27 AM, C.J. Adams-Collier c...@colliertech.orgwrote: If you do it often, you might consider listening for ssh connections on a separate port and using tc to keep things from getting out of hand: http://linux.die.net/man/8/tc Cheers, C.J. On Mon, 2010-06-28 at 09:17 -0700, Christopher Hunt wrote: +1 for dd + nc over ssh if necessary. This process can and probably will saturate your ethernet interface, so depending upon the amount of traffic the box pushes on the public interface the size of the partition and other factors, sometimes i add a crossover cable between unused interfaces on the 2 boxes and run the process over that interface, so it doesn't impact the running vms. Cheers -Chris On 6/24/2010 9:00 AM, centos-virt-requ...@centos.org wrote: Message: 3 Date: Thu, 24 Jun 2010 10:52:57 -0400 From: Kelvin Edmisonkel...@kindsight.net Subject: Re: [CentOS-virt] (KVM) How can I migrate VM in a non shared storage environment? To: Discussion about the virtualization on CentOS centos-virt@centos.org Message-ID:c848e989.30d95%kel...@kindsight.netc848e989.30d95%25kel...@kindsight.net Content-Type: text/plain; charset=US-ASCII On 24/06/10 7:17 AM, Poh Yong Hwangyong...@gmail.com wrote: I have a server running CentOS 5.5 with KVM capabilities. I need to migrate all the VMs to another server with the exact same hardware specs. The problem is it is running on individual harddisks, not shared storage. What is the best way to migrate to minimise downtime? I've had good success using dd and nc (netcat) to copy the contents of a disk or disk image from one machine to another, and verifying the copy was successful with a md5sum or sha1sum of both the original and copied disk. Kelvin -- ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt End of CentOS-virt Digest, Vol 34, Issue 13 *** ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
[CentOS-virt] (KVM) How can I migrate VM in a non shared storage environment?
Hi, I have a server running CentOS 5.5 with KVM capabilities. I need to migrate all the VMs to another server with the exact same hardware specs. The problem is it is running on individual harddisks, not shared storage. What is the best way to migrate to minimise downtime? Thanks! YongSan ___ CentOS-virt mailing list CentOS-virt@centos.org http://lists.centos.org/mailman/listinfo/centos-virt
