Bug#511378: bnx2 firmware not loaded
Package: firmware-bnx2 Platform: Dell M600 blade OS: lenny amd64 (freshly installed in December 2008) as a Xen dom0 Problem description: Thursday, the blade hardware was swapped (an M600 replaced with another M600), same disks however. Now, the ethernet devices don't appear after booting Manual intervention is required to unload and reload the module bnx2 and then do ifup eth0 Things checked already: - dmesg shows that devices are discovered during the boot phase, and an attempt is made to get firmware - the initrd is definitely configured in grub (see below) - I've extracted the initrd file, the firmware is definitely in there title Xen 3.2-1-amd64 / Debian GNU/Linux, kernel 2.6.26-1-xen-amd64 root(hd0,0) kernel /xen-3.2-1-amd64.gz module /vmlinuz-2.6.26-1-xen-amd64 root=/dev/mapper/vg00-th1_root ro console=tty0 module /initrd.img-2.6.26-1-xen-amd64 Workaround (not yet tested): One workaround I am considering is to exclude the bnx2 module from the initrd, and then load it from /etc/modules. However, it would be ideal if such workarounds could be avoided. dmesg output during boot phase: [1.497405] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008) [1.497405] ACPI: PCI Interrupt :04:00.0[A] - GSI 17 (level, low) - IRQ 17 [1.497405] firmware: requesting bnx2-06-4.0.5.fw [1.502034] Fusion MPT base driver 3.04.06 [1.502034] Copyright (c) 1999-2007 LSI Corporation [1.505058] Fusion MPT SAS Host driver 3.04.06 [1.533743] USB Universal Host Controller Interface driver v3.0 [1.533743] ACPI: PCI Interrupt :00:1d.0[A] - GSI 21 (level, low) - IRQ 21 [1.533743] PCI: Setting latency timer of device :00:1d.0 to 64 [1.533743] uhci_hcd :00:1d.0: UHCI Host Controller [1.533743] uhci_hcd :00:1d.0: new USB bus registered, assigned bus number 1 [1.533743] uhci_hcd :00:1d.0: irq 21, io base 0xcc80 [1.533763] usb usb1: configuration #1 chosen from 1 choice [1.535893] hub 1-0:1.0: USB hub found [1.536011] hub 1-0:1.0: 2 ports detected [1.559883] eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem d800, IRQ 17, node addr 00:22:19:90:e6:f8 [1.561968] ACPI: PCI Interrupt :06:00.0[A] - GSI 18 (level, low) - IRQ 18 [1.565185] firmware: requesting bnx2-06-4.0.5.fw [1.573238] eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem d600, IRQ 18, node addr 00:22:19:90:e6:fa [1.573415] ACPI: PCI Interrupt :0a:00.0[A] - 6ACPI: PCI Interrupt :08:00.0[A] - GSI 16 (level, low) - IRQ 16 [1.573415] mptbase: ioc0: Initiating bringup [1.573746] GSI 18 (level, low) - IRQ 18 [1.573936] firmware: requesting bnx2-06-4.0.5.fw [1.579344] eth2: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem da00, IRQ 18, node addr 00:1d:09:73:c2:ec [1.579509] ACPI: PCI Interrupt :0c:00.0[A] - GSI 19 (level, low) - IRQ 19 [1.579791] firmware: requesting bnx2-06-4.0.5.fw [1.585043] eth3: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem dc00, IRQ 19, node addr 00:1d:09:73:c2:ee -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511385: AverMedia AverTV Cardbus Hybrid E506R not working
Package: linux-image-2.6.26-1-686 Version: 2.6.26-12 Severity: normal Tags: patch -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi this card is not working because of small typo in kernel source: diff -ur a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c - --- a/drivers/media/video/saa7134/saa7134-dvb.c 2008-07-13 23:51:29.0 +0200 +++ b/drivers/media/video/saa7134/saa7134-dvb.c 2008-08-07 20:49:47.0 +0200 @@ -1263,6 +1263,7 @@ avermedia_xc3028_mt352_dev, dev-i2c_adap); attach_xc3028 = 1; +break; case SAA7134_BOARD_MD7134_BRIDGE_2: dev-dvb.frontend = dvb_attach(tda10086_attach, sd1878_4m, dev-i2c_adap); Can you please integrate this fix? - -- Michal Čihař | http://cihar.com | http://blog.cihar.com - -- Package-specific info: ** Kernel log: [87016.900039] pccard: CardBus card inserted into slot 0 [87017.072582] saa7130/34: v4l2 driver version 0.2.14 loaded [87017.072648] saa7134 :03:00.0: enabling device ( - 0002) [87017.072659] ACPI: PCI Interrupt :03:00.0[A] - Link [LNKA] - GSI 3 (level, low) - IRQ 3 [87017.072669] saa7133[0]: found at :03:00.0, rev: 209, irq: 3, latency: 0, mmio: 0x6040 [87017.072678] PCI: Setting latency timer of device :03:00.0 to 64 [87017.072684] saa7133[0]: subsystem: 1461:f436, board: AVerMedia Cardbus TV/Radio (E506R) [card=136,autodetected] [87017.072698] saa7133[0]: board init: gpio is 22 [87017.200057] tuner' 0-0061: chip found @ 0xc2 (saa7133[0]) [87017.252970] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00 [87017.253012] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff [87017.253046] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff [87017.253080] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253113] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [87017.253147] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253180] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253213] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253247] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253280] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253313] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253347] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253380] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253414] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253447] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.253480] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [87017.295378] xc2028 0-0061: creating new instance [87017.295395] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [87017.295416] firmware: requesting xc3028-v27.fw [87017.306140] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [87017.327023] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id . [87026.120048] (0), id 00ff: [87026.120064] xc2028 0-0061: Loading firmware for type=(0), id 00010007. [87026.320050] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 000f0007. [87026.787349] saa7133[0]: registered device video0 [v4l2] [87026.787413] saa7133[0]: registered device vbi0 [87026.787468] saa7133[0]: registered device radio0 [87027.316722] xc2028 0-0061: Loading firmware for type=BASE FM (401), id . [87036.004068] xc2028 0-0061: Loading firmware for type=FM (400), id . ** Loaded modules: Module Size Used by saa7134_dvb17580 0 saa7134 125044 1 saa7134_dvb tda100868260 0 mt352 5572 2 videobuf_dvb4580 1 saa7134_dvb dvb_core 66528 2 saa7134_dvb,videobuf_dvb tuner_xc2028 17392 1 tuner 21960 0 videodev 27520 2 saa7134,tuner v4l1_compat12260 1 videodev compat_ioctl32 1312 1 saa7134 v4l2_common10240 2 saa7134,tuner videobuf_dma_sg11140 2 saa7134_dvb,saa7134 videobuf_core 16100 3 saa7134,videobuf_dvb,videobuf_dma_sg ir_kbd_i2c 7120 1 saa7134 ir_common 39620 2 saa7134,ir_kbd_i2c tveeprom 10980 1 saa7134 i2c_core 19828 9 saa7134_dvb,saa7134,tda10086,mt352,tuner_xc2028,tuner,v4l2_common,ir_kbd_i2c,tveeprom nfs 213896 0 lockd 54248 1 nfs nfs_acl
Bug#442455: marked as done (linux-image-2.6.22-2-amd64: After software suspend USB is dead - recovers on plug event)
Your message dated Sat, 10 Jan 2009 12:49:11 +0100 with message-id 20090110114911.gb5...@galadriel.inutil.org and subject line Closing has caused the Debian Bug report #442455, regarding linux-image-2.6.22-2-amd64: After software suspend USB is dead - recovers on plug event to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 442455: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=442455 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.22-2-amd64 Version: 2.6.22-4 Severity: normal After I restart my system software suspend all USB devices stopped to work. They are not even powered any more. What helps is to plug in some device, the whole USB system recovers. regards roland lezuo -- Package-specific info: ** Version: Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) (wa...@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Thu Aug 30 23:43:59 UTC 2007 ** Tainted: PFSRMB ** Kernel log: pnp: res cnt 2 pnp: Encode io pnp: Encode irq pnp: Device 00:05 activated. pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq pnp: Device 00:09 activated. pnp: Res cnt 1 pnp: res cnt 1 pnp: Encode io pnp: Device 00:0a activated. pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq pnp: Device 00:0b activated. usb_endpoint usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2 usb_endpoint usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2 usb_device usbdev5.1: PM: resume from 0, parent usb5 still 2 sd 0:0:0:0: [sda] Starting disk skge eth0: Link is up at 100 Mbps, full duplex, flow control both ata1: port is slow to respond, please be patient (Status 0x80) ata2: port is slow to respond, please be patient (Status 0x80) ata2.00: configured for UDMA/133 sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 1:0:0:0: [sdb] Starting disk sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb_endpoint usbdev2.11_ep00: PM: resume from 0, parent 2-1 still 2 pl2303 2-1:1.0: PM: resume from 2, parent 2-1 still 2 pl2303 ttyUSB0: PM: resume from 0, parent 2-1:1.0 still 2 usb_endpoint usbdev2.11_ep81: PM: resume from 0, parent 2-1:1.0 still 2 usb_endpoint usbdev2.11_ep02: PM: resume from 0, parent 2-1:1.0 still 2 usb_endpoint usbdev2.11_ep83: PM: resume from 0, parent 2-1:1.0 still 2 usb_device usbdev2.11: PM: resume from 0, parent 2-1 still 2 usb_endpoint usbdev1.7_ep00: PM: resume from 0, parent 1-1 still 2 usbhid 1-1:1.0: PM: resume from 2, parent 1-1 still 2 usb_endpoint usbdev1.7_ep81: PM: resume from 0, parent 1-1:1.0 still 2 usbhid 1-1:1.1: PM: resume from 2, parent 1-1 still 2 usb_endpoint usbdev1.7_ep82: PM: resume from 0, parent 1-1:1.1 still 2 usb_device usbdev1.7: PM: resume from 0, parent 1-1 still 2 usb_endpoint usbdev2.12_ep00: PM: resume from 0, parent 2-2 still 2 usbhid 2-2:1.0: PM: resume from 2, parent 2-2 still 2 usb_endpoint usbdev2.12_ep81: PM: resume from 0, parent 2-2:1.0 still 2 usb_device usbdev2.12: PM: resume from 0, parent 2-2 still 2 Restarting tasks ... 6usb 1-1: USB disconnect, address 7 done. usb 2-1: USB disconnect, address 11 pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 pl2303 2-1:1.0: device disconnected usb 2-1: new full speed USB device using uhci_hcd and address 13 usb 2-1: configuration #1 chosen from 1 choice pl2303 2-1:1.0: pl2303 converter detected usb 2-1: pl2303 converter now attached to ttyUSB0 usb 2-2: USB disconnect, address 12 hub 5-0:1.0: over-current change on port 1 hub 5-0:1.0: over-current change on port 2 hub 5-0:1.0: over-current change on port 3 hub 5-0:1.0: over-current change on port 4 hub 5-0:1.0: over-current change on port 5 hub 5-0:1.0: over-current change on port 6 hub 5-0:1.0: over-current change on port 7 hub 5-0:1.0: over-current change on port 8 usb 5-8: new high speed USB device using ehci_hcd and address 17 usb 5-8: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 17 usb-storage: waiting for device to settle before scanning usb 1-1: new low speed USB device using uhci_hcd and address 8 usb 1-1: configuration #1 chosen from 1 choice input: HID 046a:0023 as /class/input/input19 input: USB HID
Bug#510195: linux-image-2.6.26-1-powerpc: macmini g4 1.07ghz does not boot with 2.6.26-1-powerpc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello! The bug number is #12330. http://bugzilla.kernel.org/show_bug.cgi?id=12330 Kind regards, Marko Kaiser -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkloreEACgkQy2xHy4E9E9p7HgCfT7aFQzl2zlVZGQ4AmlZDEKFV KXEAoI67gcdMT+UmbR5d828TS2u04ZTm =d3/w -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#501383: This bug is not there with hypervisor/dom0 from lenny
Hello. At last we upgraded hypervisor and dom0 of our servers to lenny/amd64. Now our 32bit domUs correctly see more than 4G of memory. So this bug may be closed. signature.asc Description: This is a digitally signed message part.
Bug#511412: clocksource/0: Time went backwards
Package: linux-image-2.6.26-1-xen-686 Version: 2.6.26-12 Severity: normal After upgrading a domU from etch to lenny kernel, I've faced a hard domU lockup that very looks like http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1098 after severak hours f running. I've applied the workaround descried there at comment 13, and since then domU worked several days under high load without issues. Maybe make debian kernels not to use xen clocksource until the issue is fixed? -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (620, 'testing'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
initramfs-tools 0.92o MIGRATED to testing
FYI: The status of the initramfs-tools source package in Debian's testing distribution has changed. Previous version: 0.92n Current version: 0.92o -- This email is automatically generated; the Debian Release Team debian-rele...@lists.debian.org is responsible. See http://release.debian.org/testing-watch/ for more information. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processing of linux-2.6_2.6.26-13_powerpc.changes
linux-2.6_2.6.26-13_powerpc.changes uploaded successfully to localhost along with the files: linux-2.6_2.6.26-13.dsc linux-2.6_2.6.26-13.diff.gz linux-doc-2.6.26_2.6.26-13_all.deb linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
linux-2.6_2.6.26-13_powerpc.changes ACCEPTED
Accepted: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb Override entries for your package: linux-2.6_2.6.26-13.dsc - source devel linux-doc-2.6.26_2.6.26-13_all.deb - optional doc linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb - optional devel linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb - optional devel linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb - optional admin linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb - optional admin linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb - optional admin linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb - optional admin linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb - optional admin linux-libc-dev_2.6.26-13_powerpc.deb - optional devel linux-manual-2.6.26_2.6.26-13_all.deb - optional doc linux-patch-debian-2.6.26_2.6.26-13_all.deb - optional devel linux-source-2.6.26_2.6.26-13_all.deb - optional devel linux-support-2.6.26-1_2.6.26-13_all.deb - optional devel linux-tree-2.6.26_2.6.26-13_all.deb - optional devel Announcing to debian-devel-chan...@lists.debian.org Closing bugs: 429011 478717 488063 495698 498940 505256 506835 507958 508108 508173 508661 509097 510607 Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#429011: marked as done ([OOPS] cyclades modules error path broken ?)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vc...@ries.debian.org and subject line Bug#429011: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #429011, regarding [OOPS] cyclades modules error path broken ? to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 429011: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=429011 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.18-4-486 Version: 2.6.18.dfsg.1-1 Hi, i am using the cyclades multiserial driver. There seems to be a bug in the error path on loading the driver. The cyclades Hardware consists of the PCI card and an external serial box. If the serial box is not connected the driver recognizes this and bails out. Unloading and reloading the module fails in this case with the below error message: Cyclades driver 2.3.2.20 2004/02/25 18:14:16 built May 9 2007 22:29:11 PCI: Unable to reserve mem region #1:8...@f4105000 for device :01:07.0 cyclades: failed to reserve PCI resources The first time the module loaded it looked like this: Cyclades driver 2.3.2.20 2004/02/25 18:14:16 built May 9 2007 22:29:11 ACPI: PCI Interrupt :01:07.0[A] - Link [LNKB] - GSI 5 (level, low) - IRQ 5 Cyclom-Y PCI host card with no Serial-Modules at 0xf410. 01:07.0 Communication controller: Cyclades Corporation Cyclom-Y above first megabyte (rev 01) Subsystem: Cyclades Corporation Unknown device 0100 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Interrupt: pin A routed to IRQ 5 Region 0: Memory at f4105000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 3400 [size=128] Region 2: Memory at f410 (32-bit, non-prefetchable) [size=16K] Doing a cat /proc/iomem results in a: r...@mgr1:~# cat /proc/iomem Segmentation fault And: 1BUG: unable to handle kernel paging request at virtual address c89c83be printing eip: c01ac595 *pde = 07ab2067 *pte = Oops: [#2] Modules linked in: cyclades button ac battery autofs4 ipv6 dm_snapshot dm_mirror dm_mod i810_audio ac97_codec evdev psmouse serio_raw intel_rng shpchp i2c_i801 i2c_core intel_agp snd_intel8x0 pcspkr parport_pc parport rtc agpgart snd_ac97_codec snd_ac97_bus floppy snd_pcm snd_timer snd soundcore snd_page_alloc pci_hotplug ext3 jbd ide_disk piix generic ide_core e100 mii uhci_hcd usbcore thermal processor fan CPU:0 EIP:0060:[c01ac595]Not tainted VLI EFLAGS: 00010297 (2.6.18-4-486 #1) EIP is at vsnprintf+0x288/0x458 eax: c89c83be ebx: c78c5f38 ecx: c89c83be edx: fffe esi: c786726c edi: c78c5f38 ebp: esp: c78c5ecc ds: 007b es: 007b ss: 0068 Process cat (pid: 4712, ti=c78c4000 task=c5b39ab0 task.ti=c78c4000) Stack: 0dac c7867254 0010 c7868000 c028d53b c7867254 c602e260 c602e260 0400 c0160f9f c78c5f18 c78c5f18 c74e95a0 0002 c0118c39 c602e260 c028d527 0004 c0287f0c 0008 f410 Call Trace: [c0160f9f] seq_printf+0x2b/0x48 [c0118c39] r_show+0x5a/0x63 [c016155e] seq_read+0x19a/0x27c [c01613c4] seq_read+0x0/0x27c [c01492c6] vfs_read+0xa1/0x144 [c0149621] sys_read+0x3e/0x65 [c0102a47] syscall_call+0x7/0xb Code: 3b 74 24 0c 73 03 c6 06 20 46 4d 85 ed 7f f1 e9 a0 00 00 00 8b 0f 81 f9 ff 0f 00 00 77 05 b9 1f 7d 29 c0 8b 54 24 14 89 c8 eb 06 80 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 89 c3 f6 44 24 10 10 EIP: [c01ac595] vsnprintf+0x288/0x458 SS:ESP 0068:c78c5ecc Working setup: Cyclades driver 2.3.2.20 2004/02/25 18:14:16 built May 9 2007 22:29:11 ACPI: PCI Interrupt :01:09.0[A] - Link [LNKB] - GSI 10 (level, low) - IRQ 10 Cyclom-Y/PCI #1: 0xff8f8000-0xff8fbfff, IRQ10, 16 channels starting from port 0. Cyclades driver 2.3.2.20 2004/02/25 18:14:16 built May 9 2007 22:29:11 Cyclom-Y/PCI #1: 0xff8f8000-0xff8fbfff, IRQ10, 16 channels starting from port 0. Flo -- Florian Lohoff f...@rfc822.org +49-171-2280134 Those who would give up a little freedom to get a little security shall soon have neither - Benjamin Franklin signature.asc Description: Digital signature ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to
Bug#506835: marked as done (linux-image-2.6.26-1-686: DPT SCSI controller module eata not automatically loaded, modprobe eata locks up)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vo...@ries.debian.org and subject line Bug#506835: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #506835, regarding linux-image-2.6.26-1-686: DPT SCSI controller module eata not automatically loaded, modprobe eata locks up to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 506835: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=506835 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.26-1-686 Version: 2.6.26-11~snapshot.12403 Severity: normal I have a DPT 2044W SCSI adaptor in this machine. Module eata does not get loaded automatically, and when I try to load it manually with modprobe I get a kernel stack trace then lock-up. lspci -vv 00:0a.0 SCSI storage controller: Adaptec (formerly DPT) SmartCache/Raid I-IV Controller (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 160 (1000ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 BIST result: 00 Region 0: I/O ports at e000 [size=32] Expansion ROM at ef00 [disabled] [size=32K] $ lsmod|grep -i scsi scsi_mod 131388 1 libata I can access the disk fine with sysrescuecd which has module eata built-in (does not use initrd). -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.27 (SMP w/1 CPU core; PREEMPT) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.13-5 Yet Another mkInitRD Versions of packages linux-image-2.6.26-1-686 recommends: ii libc6-i6862.7-16 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-1-686 suggests: ii grub-pc [grub] 1.96+20080724-12 GRand Unified Bootloader, version pn linux-doc-2.6.26none (no description available) -- debconf-show failed ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb
Bug#507958: marked as done (linux-2.6: Dell Latitude E6500 touchpad is not detected properly (patch available))
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vq...@ries.debian.org and subject line Bug#507958: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #507958, regarding linux-2.6: Dell Latitude E6500 touchpad is not detected properly (patch available) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 507958: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507958 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.26-11 Severity: normal Tags: patch The ALPS touchpad of Dell Latitude E6500 (and possibly others) is not detected properly, due to the device id missing in drivers/input/mouse/alps.c. A patch[1] adding the device ID was posted in LKML and works properly. [1] http://lkml.org/lkml/2008/9/7/133 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing'), (99, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=el_GR.UTF-8, LC_CTYPE=el_GR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 507...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This
Bug#488063: marked as done (linux-source-2.6.25: snd-hda-intel 2.6.24-2.6.25 regression silences headphones)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vg...@ries.debian.org and subject line Bug#488063: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #488063, regarding linux-source-2.6.25: snd-hda-intel 2.6.24-2.6.25 regression silences headphones to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 488063: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488063 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-source-2.6.25 Version: 2.6.25-5 Severity: normal I have a Toshiba Satellite P105-S6197. Sound was working okay under Linux 2.6.24. $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) $ grep Codec /proc/asound/card0/codec* Codec: Conexant CX20549 (Venice) $ Since 2.6.25, it plays fine through the speakers, but if I plug the headphones in then the speakers become silent but nothing is audible through the headphones. I've tried turning up various volumes in alsamixer and tried passing various model= parameters to the kernel (toshiba, laptop-micsense, etc.). FWIW I tell the kernel mousedev.tap_time=0 notsc SELINUX_INIT=NO -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable'), (50, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.25 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages linux-source-2.6.25 depends on: ii binutils2.18.1~cvs20071027-2 The GNU assembler, linker and bina ii bzip2 1.0.3-6 high-quality block-sorting file co Versions of packages linux-source-2.6.25 recommends: ii gcc 4:4.2.1-6 The GNU C compiler ii libc6-dev [libc-dev] 2.7-4 GNU C Library: Development Librari ii make 3.81-2 The GNU version of the make util -- no debconf information The kernel configuration is, CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_DEFCONFIG_LIST=arch/x86/configs/x86_64_defconfig CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION= CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_NAMESPACES=y CONFIG_SYSCTL=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLOCK_COMPAT=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y CONFIG_DEFAULT_IOSCHED=cfq CONFIG_CLASSIC_RCU=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y CONFIG_MCORE2=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y
Bug#508661: marked as done (Cherry pick fix for V4L UVC driver format switching)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vw...@ries.debian.org and subject line Bug#508661: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #508661, regarding Cherry pick fix for V4L UVC driver format switching to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 508661: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508661 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.26-11 Severity: normal Tags: patch Hi, Further inverstigation on bug #507280 revealed, that the UVC driver included in kernel 2.6.26 is buggy when switching from YUV to MJPEG. So please cherry pick kernel commit d63beb9ef004ff9587b3c466361276254d57d7a7 so that UVC webcam users get a working webcam with Lenny. Thanks, Gregor ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 508...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Sat, 10 Jan 2009 13:35:41 +0100 Source: linux-2.6 Binary:
Bug#497101: marked as done (w9968cf missing in linux-image-2.6.26-1-686)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vi...@ries.debian.org and subject line Bug#495698: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #495698, regarding w9968cf missing in linux-image-2.6.26-1-686 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 495698: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=495698 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.25-2-686 Version: 2.6.25-7 Severity: normal kernel/drivers/media/video/w9968cf.ko does not exist in linux-image-2.6.25-2-686. However, it does exist in linux-image-2.6.25-2-486. For reference : http://packages.debian.org/search?searchon=contentskeywords=w9968cf.komode=pathsuite=testingarch=any -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-7) (m...@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.25-2-686 root=UUID=f6fa4fec-adf8-4716-9fc9-ecc0f276806a ro ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 495...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This message was generated automatically at their request;
Processed: tagging 505250
Processing commands for cont...@bugs.debian.org: # Automatically generated email from bts, devscripts version 2.9.26etch1 tags 505250 + pending Bug#505250: linux-image-2.6.26-1-686: Acer Aspire One sound patch from post-2.6.26 git applies cleanly Tags were: patch Tags added: pending End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509097: marked as done (linux-2.6 - atl1e driver breaks multicast)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vy...@ries.debian.org and subject line Bug#509097: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #509097, regarding linux-2.6 - atl1e driver breaks multicast to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 509097: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509097 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.26-11 Severity: important The atl1e driver calculates the multicast MACs wrong. So neither ipv6 nor ipv4 multicast works. Fixed in 7ee0fddfe0. Bastian -- You! What PLANET is this! -- McCoy, The City on the Edge of Forever, stardate 3134.0 ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 509...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Sat, 10 Jan 2009 13:35:41 +0100 Source: linux-2.6 Binary: linux-source-2.6.26 linux-doc-2.6.26 linux-manual-2.6.26 linux-patch-debian-2.6.26
Bug#495698: marked as done (w9968cf missing in linux-image-2.6.25-2-686)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vi...@ries.debian.org and subject line Bug#495698: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #495698, regarding w9968cf missing in linux-image-2.6.25-2-686 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 495698: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=495698 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.25-2-686 Version: 2.6.25-7 Severity: normal kernel/drivers/media/video/w9968cf.ko does not exist in linux-image-2.6.25-2-686. However, it does exist in linux-image-2.6.25-2-486. For reference : http://packages.debian.org/search?searchon=contentskeywords=w9968cf.komode=pathsuite=testingarch=any -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-7) (m...@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.25-2-686 root=UUID=f6fa4fec-adf8-4716-9fc9-ecc0f276806a ro ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 495...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This message was generated automatically at their request;
Bug#505256: marked as done (USB storage patch to make certain mp3 players work)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vm...@ries.debian.org and subject line Bug#505256: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #505256, regarding USB storage patch to make certain mp3 players work to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 505256: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=505256 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-2.6 Version: 2.6.26-8 Severity: wishlist Hi, I don't know whether any further kernel changes are planned for Lenny, but here is a patch that has landed in Linux 2.6.27, and would be useful to some people, including myself. http://bugzilla.kernel.org/attachment.cgi?id=17594 The related bug report is: http://bugzilla.kernel.org/show_bug.cgi?id=11423 And here's the commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=fe1926a0f549741ed0ca778aa1c7d3e208895dee Thanks -- graham ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 505...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Bastian Blank wa...@debian.org (supplier of updated linux-2.6 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by
Bug#508173: marked as done (fbdev/logo: Corrupted SPE penguins on PS3)
Your message dated Sat, 10 Jan 2009 17:03:25 + with message-id e1llhf7-vu...@ries.debian.org and subject line Bug#508173: fixed in linux-2.6 2.6.26-13 has caused the Debian Bug report #508173, regarding fbdev/logo: Corrupted SPE penguins on PS3 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 508173: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508173 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: linux-image-2.6.26-1-powerpc64 Version: 2.6.26-11 On PS3, the SPE penguin logos are corrupted. This happens because in the .config all of the following conditions are met: 1. CONFIG_FB_LOGO_EXTRA=y 2. CONFIG_LOGO_LINUX_CLUT224 is not set 3. CONFIG_LOGO_LINUX_MONO=y and/or CONFIG_LOGO_LINUX_VGA16=y Apparently the code to draw the (224-color) extra logos uses properties from the main logo, even if the number of color differs. http://bugzilla.kernel.org/show_bug.cgi?id=12181 With kind regards, Geert Uytterhoeven Software Architect Sony Techsoft Centre Europe The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium Phone:+32 (0)2 700 8453 Fax: +32 (0)2 700 8622 E-mail: geert.uytterhoe...@sonycom.com Internet: http://www.sony-europe.com/ A division of Sony Europe (Belgium) N.V. VAT BE 0413.825.160 · RPR Brussels Fortis · BIC GEBABEBB · IBAN BE41293037680010 ---End Message--- ---BeginMessage--- Source: linux-2.6 Source-Version: 2.6.26-13 We believe that the bug you reported is fixed in the latest version of linux-2.6, which is due to be installed in the Debian FTP archive: linux-2.6_2.6.26-13.diff.gz to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz linux-2.6_2.6.26-13.dsc to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc linux-doc-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-image-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb linux-libc-dev_2.6.26-13_powerpc.deb to pool/main/l/linux-2.6/linux-libc-dev_2.6.26-13_powerpc.deb linux-manual-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-manual-2.6.26_2.6.26-13_all.deb linux-patch-debian-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-patch-debian-2.6.26_2.6.26-13_all.deb linux-source-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-source-2.6.26_2.6.26-13_all.deb linux-support-2.6.26-1_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-support-2.6.26-1_2.6.26-13_all.deb linux-tree-2.6.26_2.6.26-13_all.deb to pool/main/l/linux-2.6/linux-tree-2.6.26_2.6.26-13_all.deb A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments
Bug#508108: marked as done (Please enable XVR-500 and XVR-2500 fb drivers for sparc)
Your message dated Sat, 10 Jan 2009 17:03:25 +
with message-id e1llhf7-vs...@ries.debian.org
and subject line Bug#508108: fixed in linux-2.6 2.6.26-13
has caused the Debian Bug report #508108,
regarding Please enable XVR-500 and XVR-2500 fb drivers for sparc
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
508108: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508108
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
---BeginMessage---
Package: linux-2.6
Version: 2.6.26-11
Severity: wishlist
We have recently found out that Debian installation UI looks much
better on various SunBlade systems if the framebuffer drivers for
XVR-500 and XVR-2500 cards (CONFIG_FB_XVR500, CONFIG_FB_XVR2500) are
enabled [0,1]. If there is going to be another kernel rebuild before
lenny, it would be great to enable these drivers. As cards are
sparc-specific, it is sufficient to enable them for sparc. Also, it
would be nice to apply the attached simple patch, which adds the PCI
ID of a card I have in my SunBlade 1000 [1], it appears that it's the
same chip (same device ID), but manufactured by a different company.
I've sent the patch to David Miller to be included upstream, however
haven't heard back yet [2].
[0] http://lists.debian.org/debian-boot/2008/12/msg00040.html
[1] http://lists.debian.org/debian-boot/2008/12/msg00042.html
[2] http://marc.info/?l=linux-sparcm=122816564110952w=2
--
Jurij Smakov ju...@wooyd.org
Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC
diff -aur a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c
--- a/drivers/video/sunxvr500.c 2008-11-20 18:02:37.0 -0500
+++ b/drivers/video/sunxvr500.c 2008-12-01 15:43:04.0 -0500
@@ -396,6 +396,7 @@
static struct pci_device_id e3d_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), },
+ { PCI_DEVICE(PCI_VENDOR_ID_IGRAPH, 0x7a0), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), },
{ .vendor = PCI_VENDOR_ID_3DLABS,
.device = PCI_ANY_ID,
diff -aur a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h 2008-11-20 18:02:37.0 -0500
+++ b/include/linux/pci_ids.h 2008-12-01 15:43:04.0 -0500
@@ -930,6 +930,8 @@
#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801
#define PCI_DEVICE_ID_SUN_CASSINI 0xabba
+#define PCI_VENDOR_ID_IGRAPH 0x1091
+
#define PCI_VENDOR_ID_CMD 0x1095
#define PCI_DEVICE_ID_CMD_643 0x0643
#define PCI_DEVICE_ID_CMD_646 0x0646
---End Message---
---BeginMessage---
Source: linux-2.6
Source-Version: 2.6.26-13
We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:
linux-2.6_2.6.26-13.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.diff.gz
linux-2.6_2.6.26-13.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.26-13.dsc
linux-doc-2.6.26_2.6.26-13_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.26_2.6.26-13_all.deb
linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-all-powerpc_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb
to pool/main/l/linux-2.6/linux-headers-2.6.26-1-all_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-common-vserver_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb
to pool/main/l/linux-2.6/linux-headers-2.6.26-1-common_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb
to pool/main/l/linux-2.6/linux-headers-2.6.26-1-powerpc_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc64_2.6.26-13_powerpc.deb
linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-headers-2.6.26-1-vserver-powerpc_2.6.26-13_powerpc.deb
linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb
to
pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc-smp_2.6.26-13_powerpc.deb
linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb
to pool/main/l/linux-2.6/linux-image-2.6.26-1-powerpc64_2.6.26-13_powerpc.deb
linux-image-2.6.26-1-powerpc_2.6.26-13_powerpc.deb
to
Re: linux-2.6 upload planned
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 dann frazier da...@debian.org writes: hey, I wanted to give -release -boot a heads up that the kernel team is looking to do a linux-2.6 upload to sid tomorrow. As discussed on the d-i channel, delays in the d-i release have given us a short window to introduce a new build for inclusion in RC2. Changes pending for this update include: - a few local DoS security issues - the hppa kernel fix that was causing crashes during ruby builds (doesn't fix the FTBFS - that may be a userspace issue) - reintroduces a driver for the ia64 rtc (regression) - several other fixes of = important severity from Moritz's recent bug triage Please go ahead. - -- O T A V I OS A L V A D O R - - E-mail: ota...@debian.org UIN: 5906116 GNU/Linux User: 239058 GPG ID: 49A5F855 Home Page: http://otavio.ossystems.com.br - - Microsoft sells you Windows ... Linux gives you the whole house. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.8+ http://mailcrypt.sourceforge.net/ iEYEARECAAYFAklozVYACgkQLqiZQEml+FWerwCdH7IgPdJV1ihkDY7TW7A5H7dm wSIAn3S49quHqlHxESXJJdtPhdMaMxf0 =tFgT -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#507994: Please include version 1.6 of hso.c
On Sun, Dec 14, 2008 at 02:22:10PM +0100, Torsten Jerzembeck wrote: - The 1.2 driver included with the current kernel sources is next to useless. Really poor reception, and very frequent lock-ups of the system. It seems that this version doesn't handle handovers and network outages gracefully at all and has severe problems when disconnecting the USB modem. - The 1.6 driver from the Pharscape forum that aba is talking about gives _much_ better reception and is _much_ more stable than the 1.2. However, even this causes system lockups. I've managed to nail down the cause, it seems that the code has problems with rapid changes between no reception and GPRS/UMTS when under network load. - I tried to backport the hso.c module from linux-next (kindly provided by Florian Weimer; my version is attached to this mail). It uses an additional element in the tty_struct that is not present in earlier versions of the kernel. After changing the code not to use tty_kref_put and tty_kref_get, it compiles and can be inserted, but the system freezes on the first access of the hardware. I suppose there is some kind of locking missing, but I'm not fluent enough in C to debug this. My next step will be using a vanilla 2.6.27.9 kernel with the 1.6 hso.c from the Pharscape forum, as this is reported to be stable and cause no freezes. FYI, there's an ITP filed about this driver : #501760 Hope this helps, -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511417: Raid1 resync does not run in the background
Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-12 Severity: medium I have a desktop with 1Tb raid1 disk. After a crash it took about 2 hours to boot, since the raid1 resync slowed the box down. Setting in /etc/sysctl.conf dev.raid.speed_limit_max = 3 helped in my case. I do however think that a raid1 resync should behave reasonably out of the box. Sincerely, Joachim -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511419: [linux-image-2.6.26-1-686] Please apply upstream patch for unbreaking /proc/pid/pagemap on 32bit systems
Package: linux-image-2.6.26-1-686
Version: 2.6.26-11
Severity: normal
Tags: patch
--- Please enter the report below this line. ---
There is a patch in upstream kernel 2.6.28 which fixes an oversight bug
in the code for /proc/pid/pagemap file; you can find the commit at
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=49c50342c728344b79c8f9e8293637fe80ef5ad5
Without this bugfix, the pagemap file is missing the Present/Swapped
bits for every page on 32 bit systems, because they are encoded in bits
62 and 63, while the bug truncates the values to 32 bits.
The patch itself is attached as well. Would it be possible to apply it
to the kernel for Lenny? Or will it appear there anyway with a future
update?
Thanks,
Oliver
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.26-1-686
Debian Release: lenny/sid
990 testing mainbox
990 testing deb.opera.com
500 unstableviewizard.com
500 unstablesnapshots.ekiga.net
500 unstablemainbox
500 stable mainbox
500 stable emacs.orebokech.com
500 stable deb.opera.com
500 experimentalmainbox
--- Package information. ---
Depends (Version) | Installed
=-+-=
module-init-tools | 3.4-1
initramfs-tools(= 0.55) | 0.92g
OR yaird(= 0.0.13) |
OR linux-initramfs-tool |
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -557,9 +557,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte)
return swp_type(e) | (swp_offset(e) MAX_SWAPFILES_SHIFT);
}
-static unsigned long pte_to_pagemap_entry(pte_t pte)
+static u64 pte_to_pagemap_entry(pte_t pte)
{
- unsigned long pme = 0;
+ u64 pme = 0;
if (is_swap_pte(pte))
pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
| PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
reassign 511393 to linux-2.6, found 511393 in 2.6.26-10
reassign 511393 linux-2.6 found 511393 2.6.26-10 -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: reassign 511393 to linux-2.6, found 511393 in 2.6.26-10
Processing commands for cont...@bugs.debian.org: reassign 511393 linux-2.6 Bug#511393: ethtool: Shows that there is a link when there is none. Bug reassigned from package `ethtool' to `linux-2.6'. found 511393 2.6.26-10 Bug#511393: ethtool: Shows that there is a link when there is none. Bug marked as found in version 2.6.26-10. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: closing 510654
Processing commands for cont...@bugs.debian.org: close 510654 Bug#510654: linux-2.6: [hppa] UP-optimized flush_tlb_mm is broken 'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing. Bug closed, send any further explanations to Lucas Nussbaum lu...@lucas-nussbaum.net End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: fixed 510654 in 2.6.26-13
Processing commands for cont...@bugs.debian.org: fixed 510654 2.6.26-13 Bug#510654: linux-2.6: [hppa] UP-optimized flush_tlb_mm is broken Bug marked as fixed in version 2.6.26-13. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#511449: linux-image-2.6.26-1-vserver-686: Problem with Vserver CPU scheduler, vserver never hold (hold-ticks always 0)
Package: linux-image-2.6.26-1-vserver-686 Version: 2.6.26-12 Severity: normal Hi, i was trying out the token bucket directly with lenny but seems that no configuration makes the guest vserver get hold. The status and the configuration of the scheduler can be shown here: beta:/etc/vservers/amule# cat /proc/virtual/40001/sched FillRate: 1,1 Interval: 1,8 TokensMin: 750 TokensMax: 2988 PrioBias: 0 cpu 0: 2 7 0 0 0 RI 1 750 2988 1/1 1/8 0 0 cpu 1: 62829 22 0 0 0 RI 1 750 2988 1/1 1/8 0 0 The guest was running the burnMMX application for some time consumming 100% of one of the two cpu's. The flags of the vserver are as follows: beta:/etc/vservers/amule# cat flags sched_hard virt_mem virt_uptime virt_cpu virt_load virt_time beta:/etc/vservers/amule# cat /proc/virtual/40001/status UseCnt: 5 Tasks: 2 Flags: 0016021f0110 BCaps: 04ff CCaps: 0101 Spaces: 1c020200 I hope it wont be a configuration problem, after reading quite a few documentation from linux-vserver.org and googling for examples, configurations and similar cases like this i reached the conclusion that maybe a bug. Thanks in advance :) -- Package-specific info: ** Version: Linux version 2.6.26-1-vserver-686 (Debian 2.6.26-12) (wa...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 21:11:05 UTC 2008 ** Command line: root=/dev/mapper/system-root ro quiet ** Not tainted ** Kernel log: [3.536428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [3.536437] usb usb1: Product: UHCI Host Controller [3.536444] usb usb1: Manufacturer: Linux 2.6.26-1-vserver-686 uhci_hcd [3.536452] usb usb1: SerialNumber: :00:07.2 [3.536415] ACPI: PCI Interrupt :00:07.3[D] - Link [LNKD] - GSI 11 (level, low) - IRQ 11 [3.536415] uhci_hcd :00:07.3: VIA VLink IRQ fixup, from 9 to 11 [3.536415] uhci_hcd :00:07.3: UHCI Host Controller [3.536415] uhci_hcd :00:07.3: new USB bus registered, assigned bus number 2 [3.536415] uhci_hcd :00:07.3: irq 11, io base 0xd000 [3.536588] usb usb2: configuration #1 chosen from 1 choice [3.536685] hub 2-0:1.0: USB hub found [3.536709] hub 2-0:1.0: 2 ports detected [3.641989] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [3.642003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [3.642012] usb usb2: Product: UHCI Host Controller [3.642020] usb usb2: Manufacturer: Linux 2.6.26-1-vserver-686 uhci_hcd [3.642027] usb usb2: SerialNumber: :00:07.3 [3.648811] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot :00:07.1 [3.648811] VP_IDE: not 100% native mode: will probe irqs later [3.648885] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci:00:07.1 [3.648910] ide0: BM-DMA at 0xffa0-0xffa7 [3.648931] ide1: BM-DMA at 0xffa8-0xffaf [3.648947] Probing IDE interface ide0... [3.832749] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [3.955466] FDC 0 is a post-1991 82077 [4.070868] hda: Maxtor 6Y160P0, ATA DISK drive [4.743265] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [4.743407] hda: UDMA/100 mode selected [4.743529] Probing IDE interface ide1... [5.306238] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [5.306238] ide1 at 0x170-0x177,0x376 on irq 15 [5.351274] 8139cp :00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [5.351324] 8139cp :00:0a.0: Try the 8139too driver instead. [5.352029] No dock devices found. [5.361397] 8139too Fast Ethernet driver 0.9.28 [5.361397] ACPI: PCI Interrupt :00:0a.0[A] - GSI 18 (level, low) - IRQ 18 [5.363631] eth0: RealTek RTL8139 at 0xc800, 00:c0:26:a0:86:d3, IRQ 18 [5.363641] eth0: Identified 8139 chip type 'RTL-8139B' [5.401184] SCSI subsystem initialized [5.449184] libata version 3.00 loaded. [5.502478] hda: max request size: 512KiB [5.503734] hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63 [5.503907] hda: cache flushes supported [5.504060] hda: hda1 hda2 [5.873806] device-mapper: uevent: version 1.0.3 [5.873806] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [6.288345] PM: Starting manual resume from disk [6.334167] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [6.338396] SGI XFS Quota Management subsystem [6.342396] Filesystem dm-0: Disabling barriers, not supported by the underlying device [6.346396] XFS mounting filesystem dm-0 [6.737953] Ending clean XFS mount for filesystem: dm-0 [8.410035] udevd version 125 started [9.686094] Linux agpgart interface v0.103 [9.700792] agpgart: Detected VIA Apollo Pro 133 chipset [9.701900] agpgart: AGP aperture is 4M
