WWW.DEBIAN.HG.PL
Hello, I visited www.debian.hg.pl and I noticed that you are not listed on some search engines. I am sure you can increase the number of people who visit www.debian.hg.pl . Do you know TrafficMagnet? TrafficMagnet is a unique technology that instantly submits your web site to over 300,000+ search engines and directories every month. This is a very low-cost and effective way of advertising your site. To check our prices and submit www.debian.hg.pl to 300,000+ search engines, go to TrafficMagnet.net I would love to hear from you. Best Regards,Christine HallSales Marketingwww.TrafficMagnet.net
Re: algo parecido a una red ;)
On Wed, Jul 25, 2001 at 08:23:47PM +0200, Fermín Manzanedo wrote: Ahí va: Tengo conectadas mis dos máquinas por el paralelo, con plip. Una de ellas tiene un modem, pero en casa somos dos y cuando uno está conectado a internet el otro quiere conectarse también. La idea es un tanto rocambolesca; conecto una máquina con un modem a mi ISP y la otra a la una con un cable paralelo. ¿Habría posibilidad de que con mi modem en una máquina y plip, uniendo ámbas, hacer que las dos máquinas salgan a la red?. Sería algo así como usar la del modem como pasarela a la red ¿no?. Estoy leyendo la Guía de Administración de Redes, pero me lío en el momento de llamar a ARP (si realmente se puede hacer). O me parece que tendré que comprar un par de eth's :) No solo es viable, sinó que está tirado. Una vez conectados los dos ordenadores por plip que es lo más dificil. Para que el segundo ordenador tenga salida a internet solamente tienes que poner una regla para que te haga masquerading tal que ( extraido del Masquerading-HOWTO.txt) ;) : 1) # echo 1 /proc/sys/net/ipv4/ip_forward 2) /sbin/ipchains -A forward -s (ip-segundoordenador)/32 -d 0.0.0.0/0 -j MASQ -- Saludos | Es inutil, no me hacen ni caso Javier Fafián Alvarez | -- Dios.
Re: algo parecido a una red ;)
Es cierto, se me han olvidado un par de cosas: 1) # echo 1 /proc/sys/net/ipv4/ip_forward 2) /sbin/ipchains -A forward -s (ip-segundoordenador)/32 -d 0.0.0.0/0 -j MASQ 3) Efectivamente en el segundo ordenador tienes que poner el default gw tal que: route add default gw (ip-primerordenador) 4) Instala el bind tal que: apt-get install bind Es para que te resulva los nombres. Con instalarlo basta, no hay que configurar nada y en el /etc/resolv.conf del segundo ordenador pones una linea tal que: nameserver (ip-primerordenador). El cuarto paso parece un poco lioso pero no lo es. Verás, si no lo hacer podrás llegar a internet con un ping a una dirección ip ( o con lo que quieras ), pero a una dirección ip. Otra solución sería poner como nameserver del primer ordenador el mismo que el del segundo ( cuando este está conectado a internet), pero esta dirección podría variar ... -- Saludos | Es inutil, no me hacen ni caso Javier Fafián Alvarez | -- Dios.
Re: informix
Yo utilicé Informix sobre SCO hace un par de años e iba de maravilla, pero claro, es carsimo. De todas formas Informix es bueno para cargas MUY grandes (muy muy grandes). Para linux tengo una versión de evaluación que llegué a instalar (bastante bien) y creo recordar que se podía descargar de la web de Informix, al menos antes de que se lo comiera IBM ... De todas formas, ¿has probado en http://www.informix.com/evaluate/? - Mensaje Original - De: jose maria [EMAIL PROTECTED] Fecha: Miercoles, Julio 25, 2001 8:18 pm Asunto: informix -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 en el linux magazine 7 viene una comparativa, de bases de datos mirando lo que dicen pone muy bien a informix foundation.2000 es decir el paquete con herramientas de desarrollo etc. lo digo por la mala experiencia que ha sufrido el otro colistero. dice lo siguiente version, 9.21 ; fecha de lanzamiento, enero 2.001; instalacion. grafico y texto; integracion web; herramientas de desarrollo incluidas, j/foundation, web datablade, excalibur text search,office connect; replicacion si, multi master; nivel de cierre tabla.fila. pagina; soporte de transaccion si; herramientas de backup online, incluidas y terceros; apis disponibles, vb , java, object translator. odbc,jdbc.c.c++, cgi; lenguajes soportados, odbc, jdbc, c,c++,cgi ; drivers odbc, si ; soporte de subinterrogacion sql, si; clientes , linux. unix. windows, java, web; licencia, comercial; soporte, soporte incidental basado en cuotas, mantenimiento basico, soporte premium 24x7; precio 20.000 dolares por la primera cpu, 10.000 dolares por cada adicional hasta 4; plataformas de servidor, linux, unix, windows, nt/2000; url www.informix.com, telefono gratuito (800)3880366, no dice que haya versiones de evaluacion pero habra que ir a su web , de todas maneras la ventajas sobre mysql, sin comentar el precio, no parecen insalbables solo el nivel de cierre que mysql no lo tiene para fila, al parecer esto se esta solucionando, y la replicacion que en mysql es single master, en cuanto al soporte www.nusphere.com lo da ademas de herramientas de desarrollo perl 5.6 y php 4.04, en las siguientes condiciones. incluidos 30 dias web y e-mail, 365 dias de soporte de instalacion, soporte basado en cuotas disponible.; precio 79 dolares (basico) 299 dolares (abanzado) 3.000 dolares (avanzado plus) tno gratuito (800) 4776473; informix dice que es muy buena en el terreno de servir contenidos multimedia. Asi que los que andeis en estas lides, sabreis lo que es mejor, a mi sin tener ni puta idea del tema lo de los 2 pavos por la primera cpu y digamos un minimo de dos mas necesarias, me parece una salvajada perfectamente evitable, sin hablar de la contratacion de un especialista, al precio de hoy la solucion nusphere mysql, el soporte avanzado plus, seria durante unos cuantos years. hay ocho en la comparativa si os interesa alguna otra me lo decis, son las habituales ibm, oracle, sybase, postgresql dado por empresas etc. un saludo jose maria -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7Xw1uCVa0P72y9qYRAkGlAKDBR9aBKN5oy4pqELJARo9iwR7BvACg5eQI q7pIP+Uj6OO512IRlgRw1FQ= =6tsl -END PGP SIGNATURE- -- Unsubscribe? mail -s unsubscribe debian-user-spanish- [EMAIL PROTECTED] /dev/null ___ Consigue tu e-mail gratuito TERRA.ES Haz clic en http://www.terra.es/correo/
Re: Equivocacion con el router
On Wed, Jul 25, 2001 at 07:34:18PM +0200, Albert Manyà Pau wrote: Estaba trasteando desde mi casa con el router adsl que nos ha instalado la timo en la empresa. Desde una session telnet entre en el programa de configuración i, al cambiar las reglas del filtro sobre telnet me equivoqué al escribir la IP del ordenador que tenia que hacer de servidor telnet. Puedo solucionar este problema remotamente o bien me tendre que desplazar al curro? (Espero que no) Gracias anticipadas. PD: Al menos me queda el consuelo que los admin. de la timo tampoco van a entrar... Vale ya esta solucionado: por suerte tenia una copia de la configuracion i la pude entrar por ftp. Fiu... -- -- Albert Manyà Pau | http://elmoro.hobbiton.org [EMAIL PROTECTED] | GnuPG - pub 1024D/9D6EF582 Key fingerprint = 4523 E4D6 F385 7A2B 7996 802F 7169 40F9 9D6E F582 -- -- Albert Manyà Pau| http://elmoro.hobbiton.org [EMAIL PROTECTED] | GnuPG - pub 1024D/9D6EF582 Key fingerprint = 4523 E4D6 F385 7A2B 7996 802F 7169 40F9 9D6E F582 pgpZmBi127nSR.pgp Description: PGP signature
router
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 si quiero poner el router efficient en modo monopuesto para que sea un linux el que gestione todo y pueda dar otros servicios, de la segunda tarjeta del linux al router, el cable debe ser cruzado o paralelo? me comento el instalador que ya venia preparado para hacer el cruce, pero no lo tengo nada claro. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7YAisCVa0P72y9qYRAve1AKD2zvnf798wk9dSAkBovuuB/Y5uOwCeP+P3 Z6wYzgUvUy/xDsk5pvhcN3o= =pABH -END PGP SIGNATURE-
Re: router
Hola Si conectas directamente el router a la tarjeta de red del pc, independientemente de que lo tengas configurado como monopuesto o multipuesto, el cable debe ser cruzado. Yo juraría que ya viene con un cable cruzado. Por otra parte, ¿no preferiras hacer filtrado de puertos, a nivel del router y poner unos proxies a nivel de aplicación en el equipo? Hombre, es un poco más laborioso, pero es más seguro. Saludos. El 26 Jul 2001 a las 02:10PM +0200, jose maria escribio: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 si quiero poner el router efficient en modo monopuesto para que sea un linux el que gestione todo y pueda dar otros servicios, de la segunda tarjeta del linux al router, el cable debe ser cruzado o paralelo? me comento el instalador que ya venia preparado para hacer el cruce, pero no lo tengo nada claro. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7YAisCVa0P72y9qYRAve1AKD2zvnf798wk9dSAkBovuuB/Y5uOwCeP+P3 Z6wYzgUvUy/xDsk5pvhcN3o= =pABH -END PGP SIGNATURE- -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Andres Seco Hernandez- [EMAIL PROTECTED] MCP ID 445900 - http://andressh.alamin.org GnuPG public information: pub 1024D/3A48C934 E61C 08A9 EBC8 12E4 F363 E359 EDAC BE0B 3A48 C934 -- Alamin GSM SMS Gateway - http://www.alamin.org Debian GNU/Linux - http://www.debian.org Grupo de Usuarios de GNU/Linux de Guadalajara y alrededores - http://gulalcarria.sourceforge.net -- pgp0GkVrmh8U9.pgp Description: PGP signature
kernel-headers y kernel-source
Hola Entre los paquetes kernel-source y kernel-headers no veo mucha coherencia. A ver si alguien me aclara el asunto. Estoy usando ahora potato 2.2r3. Primero, para alcararme, 2.2.19pre17 es posterior a 2.2.19 ¿no? Segundo, hay dos paquetes kernel-source de la 2.2.19: kernel-source-2.2.19 kernel-source-2.2.19pre17 pero hay bastantes más headers: kernel-headers-2.2.19pre17-compact kernel-headers-2.2.19pre17-idepci kernel-headers-2.2.19-compact kernel-headers-2.2.19-idepci kernel-headers-2.2.19-ide kernel-headers-2.2.19 kernel-headers-2.2.19-sparc Supongo que el sparc para intel no vale, está claro, pero ¿porqué es un paquete separado? ¿son diferentes las cabeceras para diferentes arquitecturas? Si uso kernel-source-2.2.19pre17, ¿qué cabeceras debo usar? las dos pre17 no incluyen soporte SCSI? lo necesito, luego, ¿uso las cabeceras 2.2.19? ¿o cambio de kernel-source? Toiperdio... Gracias. -- Andres Seco Hernandez- [EMAIL PROTECTED] MCP ID 445900 - http://andressh.alamin.org GnuPG public information: pub 1024D/3A48C934 E61C 08A9 EBC8 12E4 F363 E359 EDAC BE0B 3A48 C934 -- Alamin GSM SMS Gateway - http://www.alamin.org Debian GNU/Linux - http://www.debian.org Grupo de Usuarios de GNU/Linux de Guadalajara y alrededores - http://gulalcarria.sourceforge.net -- pgpG70UcciIuQ.pgp Description: PGP signature
Re: kernel-headers y kernel-source
El Jueves 26 Julio 2001 14:40, Andres Seco Hernandez escribió: Hola Entre los paquetes kernel-source y kernel-headers no veo mucha coherencia. A ver si alguien me aclara el asunto. Estoy usando ahora potato 2.2r3. Primero, para alcararme, 2.2.19pre17 es posterior a 2.2.19 ¿no? Segundo, hay dos paquetes kernel-source de la 2.2.19: kernel-source-2.2.19 kernel-source-2.2.19pre17 pero hay bastantes más headers: kernel-headers-2.2.19pre17-compact kernel-headers-2.2.19pre17-idepci kernel-headers-2.2.19-compact kernel-headers-2.2.19-idepci kernel-headers-2.2.19-ide kernel-headers-2.2.19 kernel-headers-2.2.19-sparc Supongo que el sparc para intel no vale, está claro, pero ¿porqué es un paquete separado? ¿son diferentes las cabeceras para diferentes arquitecturas? Si uso kernel-source-2.2.19pre17, ¿qué cabeceras debo usar? las dos pre17 no incluyen soporte SCSI? lo necesito, luego, ¿uso las cabeceras 2.2.19? ¿o cambio de kernel-source? Toiperdio... Gracias. Cuando usas cualquier kernel-source, no necesitas instalar las kernel-headers, ya que estas últimas van incluidas en en kernel-source. El objetivo de instalar las kernel-headers es que si no vas a instalar ningún kernel-source y vas a compilar cualquier programa que tenga que resolver símbolos ed compilación incluidos en las fuentes del kernel los pueda encontrar en las cabeceras (kernel-headers). El tamaño de las kernel-headers es significativamente inferior que el de los fuentes completos. Lo que tienes que hacer si instalas el kernel-source es hacer un enlace simbólico /usr/src/linux que apunte al directorio donde hayas descomprimido el kernel-source. Un saludo. -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Mario J. Barchéin Molina. Granada (Spain) [EMAIL PROTECTED] || [EMAIL PROTECTED] http://www-etsi2.ugr.es/~mario Equipo Web de la ETSI Inf. de Granada (Spain) [EMAIL PROTECTED] http://www-etsi2.ugr.es -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Re: kernel-headers y kernel-source
El Jueves, 26 Julio 2001, Andres Seco Hernandez [EMAIL PROTECTED] org escribió: Hola Andrés, Entre los paquetes kernel-source y kernel-headers no veo mucha coherencia. A ver si alguien me aclara el asunto. Estoy usando ahora potato 2.2r3. Primero, para alcararme, 2.2.19pre17 es posterior a 2.2.19 ¿no? No. es PREvio. [] No puedo ayudarte mucho con estos paquetes de kernel-source y kernel-headers, pero si puedo recomendarte lo que yo hago: pasa de ellos y vete directamente a por el fuente del kernel de kernel.org, despues con el paquete kernel-package me hago mi paquete .deb conteniendo el binario del kernel, lo instalo y listo. Ventajas: - No tienes que decidir que sub-versiones bajarte. - No tienes que bajarte las fuentes completas (los 19 Mb) cuando cambian de versión, sólo el parche (alrededor de 1 Mb). Desventajas: - No lo puedes hacer con apt-get. Saludos, -- Luis Arocha Data Islas Canarias, España
Re: kernel-headers y kernel-source
Andres Seco Hernandez wrote: ... Entre los paquetes kernel-source y kernel-headers no veo mucha coherencia. A ver si alguien me aclara el asunto. Estoy usando ahora potato 2.2r3. Primero, para alcararme, 2.2.19pre17 es posterior a 2.2.19 ¿no? ... No, el orden es 2.2.18, 2.2.19pre1, 2.2.19pre2, ... 2.2.19. Lo puedes ver en el changelog del 2.2.19. Segundo, hay dos paquetes kernel-source de la 2.2.19: ... pero hay bastantes más headers: kernel-headers-2.2.19pre17-compact kernel-headers-2.2.19pre17-idepci kernel-headers-2.2.19-compact kernel-headers-2.2.19-idepci kernel-headers-2.2.19-ide kernel-headers-2.2.19 kernel-headers-2.2.19-sparc ... Si instalas el kernel-source y compilas tu propio kernel no hace falta instalar ningún kernel-header* Los paquetes kernel-header* están para quienes quieren compilar algún paquete que use los fuentes del kernel y no quieran bajarse el kernel-source completo. En esos casos te instalas el kernel-image que quieras... y el kernel-header que se corresponda con ese kernel-image. ... Si uso kernel-source-2.2.19pre17, ¿qué cabeceras debo usar? las dos pre17 no incluyen soporte SCSI? lo necesito, luego, ¿uso las cabeceras 2.2.19? ¿o cambio de kernel-source? ... Resumiendo: instala el source 2.2.19 que es el último. Los headers no te harán falta (ya vienen en el source). -- Saludos, O__ Enzo.,/ ()_\() Enzo A. Dari | Instituto Balseiro / Centro Atomico Bariloche 8400-S. C. de Bariloche, Argentina | [EMAIL PROTECTED] Phone: 54-2944-445208, 54-2944-445100 Fax: 54-2944-445299 Web page: http://cabmec1.cnea.gov.ar/darie/darie.htm
Re: kernel-headers y kernel-source
--- Andres Seco Hernandez [EMAIL PROTECTED] wrote: Hola Entre los paquetes kernel-source y kernel-headers no veo mucha coherencia. A ver si alguien me aclara el asunto. Estoy usando ahora potato 2.2r3. Primero, para alcararme, 2.2.19pre17 es posterior a 2.2.19 ¿no? No es previo... asi que anterior. Son las versiones que aun no estan completamente terminadas. Segundo, hay dos paquetes kernel-source de la 2.2.19: kernel-source-2.2.19 kernel-source-2.2.19pre17 pero hay bastantes más headers: kernel-headers-2.2.19pre17-compact kernel-headers-2.2.19pre17-idepci kernel-headers-2.2.19-compact kernel-headers-2.2.19-idepci kernel-headers-2.2.19-ide kernel-headers-2.2.19 kernel-headers-2.2.19-sparc Mmmm. Que yo sepa deberia haber kernel-2.2.19-ide, idepci y eso (no lo se, el mio venia con 2.2.17pre). Cada uno de ellas trae las cabeceras del kernel (para programas que las necesitan) especificas para cada uno de ellos. Si no me equivoco (y si lo hago me corregis) se hace porque esas son las cabeceras tal y como se quedan al configurar y son especificas a las opciones del kernel. Supongo que el sparc para intel no vale, está claro, pero ¿porqué es un paquete separado? ¿son diferentes las cabeceras para diferentes arquitecturas? Eso no lo se :( Si uso kernel-source-2.2.19pre17, ¿qué cabeceras debo usar? las dos pre17 no incluyen soporte SCSI? lo necesito, luego, ¿uso las cabeceras 2.2.19? ¿o cambio de kernel-source? Se supone que solo hay un kernel source por version, ya que los paquetes binarios se construyen de ahi con kernel-package. Espero que te sirva Gabriel Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie
como se si puedo imprimir?
Hola lista, Tengo un ordenador conectado a una red local y hay un servidor NT4 con una impresora postscript. He configurado mi printcap de la siguiente manera lp|ngrps|Gestetner PS:\ :lp=:sd=/var/spool/lpd/nrgps:rm=servidorNT.uv.es:rp=NRGPS:\ :lpr_bounce:\ :sh:pw#80:pl#72:px#1440:mx#0:\ :af=/var/log/lp-acct:lf=/var/log/lp-errs: pero no consigo imprimir. Tengo dos dudas: Una es que no se como saber si el lpd está corriendo o no (aparte de ps ax|grep lp). Con lpc no encuentro deferencia entre que el demoño esté corriendo y que no esté corriendo. Y la otra es porqué no me imprime :-) Ya se que esta segunda duda es un pelín demasiado general, pero a lo mejor alguien ve algo en el printcap o tiene experiencia con impresión sobre NT y me puede dar alguna idea Gracias.
Re: como se si puedo imprimir?
hola si no te fias del ps, intenta /etc/init.d/lpd start Starting printer spooler: lpd already running. para imprimir en una red con impresoras que cuelgan de una maquina guindow$ uso en /etc/printcap lo siguiente: lp|remote-smbprinter:\ :sh:\ :lp=/dev/null:\ :sd=/var/spool/lpd/lp:\ :if=/usr/local/sbin/smbprint: luego te creas el script /bin/smbprint con lo siguiente: #!/bin/sh /etc/magicfilter/ljet4m-filter | smbclient //server/hp4 PASSWORD -P \ -U USER -c print - /dev/null cambia ljet4m-filter por el filtro del magicfilter para la impresora que uses y cambia server por el nombre o ip de la maquina guindow$ y hp4 por el nombre de la impresora en la maquina. por supuesto debes tener instalados lpr, magicfilter y smbclient saludos! jaume teixi. On Thu, 26 Jul 2001 16:25:31 +0200 Ignacio García Fernández [EMAIL PROTECTED] wrote: Tengo dos dudas: Una es que no se como saber si el lpd está corriendo o no (aparte de ps ax|grep lp). Con lpc no encuentro deferencia entre que el demoño esté corriendo y que no esté corriendo. Y la otra es porqué no me imprime :-) Ya se que esta segunda duda es un pelín demasiado general, pero a lo mejor alguien ve algo en el printcap o tiene experiencia con impresión sobre NT y me puede dar alguna idea
Re: Problemas para instalar en Laptop
Lo único que he podido adelantar es que en Linux setserial /dev/ttyS0 me da 0x378 IRQ 3, que en Windows están asignados al puerto infrarrojo (como COM4). Y setserial /dev/ttyS1 me dan 0x2f8 IRQ 4, correspondientes al COM2 real en Windows (y que si funciona), pero con UART desconocido. De hecho hasta statserial /dev/ttyS1 me da un IO error. O sea que el COM4 está en ttyS0 y pareciera que funcionando (no sé como probarlo), pero el COM2 aunque está en ttyS1 no funciona :( Benjamin Encuentra wrote: Hola. Creo recordar que el puerto de infrarrojos se da de tortas con el serie en los Thinkpad. De todas formas lo mejor es buscar en google las páginas diversas que hay sobre el tema con instrucciones específicas de cada ordenador. Por lo menos a mi me ayudan mucho. Saludos, - Original Message - From: Dr. Aldo Medina [EMAIL PROTECTED] Recién adquirí una Thinkpad 380ED. He tenido diversos problemas para lograr instalar al 100% Debian, tanto woody como potato. Lo que me llama la atención es que aunque he leído varias páginas de instalación en esta misma máquina, ninguna menciona un problema como el mío, así que supongo ha de ser un detalle menor que desconozco. Cabe aclarar que aunque he instalado Linux en diversas computadoras, este es mi primer contacto con una laptop, así que tal vez sea algún error muy tonto. Mis problemas son que no puedo lograr que reconozca el puerto serial. Más específicamente los modems conectados al mismo. Tanto pppconfig como wvdial ni siquiera logran detectar el puerto con el modem. He usado un Zoom 28.8 y un Motorola ModemSurfer 56k, ambos funcionando perfectamente bajo Linux en mi computadora de escritorio, y en Windows98 en la misma laptop. El otro problema es que no puedo instalar el modulo lp. Siempre me dice que param_io o param_irq equivocados, aun cuando estoy seguro son los valores correctos, e inclusive intentando todas las combinaciones posibles. Alguna idea? -- Linux User #98419 -o)| El hombre es una breve aventura http://counter.li.org /\| química sin sentido Manuel Vincent ICQ 94335020 _\_v | Si quieres ayudarme, ponme de| referencia en www.puntosclub.com | _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: como se si puedo imprimir?
Es decir que en realidad como cliente uno no tiene que configurar nada de samba. Se utiliza smbclient y a correr. Sólo un par de dudas, en el printcap pones /usr/local/sbin/smbprint y luego me dices que cree el script /bin/smbprint. Es un error o hay algo que no se? Y el PASWORD que aparece en el script tiene que ser algún pasword en concreto? Porque esto se supone que tiene que valer para todos los ususarios. Muchas gracias. On Thu, Jul 26, 2001 at 06:12:13AM +0200, Jaume Teixi wrote: hola si no te fias del ps, intenta /etc/init.d/lpd start Starting printer spooler: lpd already running. para imprimir en una red con impresoras que cuelgan de una maquina guindow$ uso en /etc/printcap lo siguiente: lp|remote-smbprinter:\ :sh:\ :lp=/dev/null:\ :sd=/var/spool/lpd/lp:\ :if=/usr/local/sbin/smbprint: luego te creas el script /bin/smbprint con lo siguiente: #!/bin/sh /etc/magicfilter/ljet4m-filter | smbclient //server/hp4 PASSWORD -P \ -U USER -c print - /dev/null cambia ljet4m-filter por el filtro del magicfilter para la impresora que uses y cambia server por el nombre o ip de la maquina guindow$ y hp4 por el nombre de la impresora en la maquina. por supuesto debes tener instalados lpr, magicfilter y smbclient saludos! jaume teixi. On Thu, 26 Jul 2001 16:25:31 +0200 Ignacio García Fernández [EMAIL PROTECTED] wrote: Tengo dos dudas: Una es que no se como saber si el lpd está corriendo o no (aparte de ps ax|grep lp). Con lpc no encuentro deferencia entre que el demoño esté corriendo y que no esté corriendo. Y la otra es porqué no me imprime :-) Ya se que esta segunda duda es un pelín demasiado general, pero a lo mejor alguien ve algo en el printcap o tiene experiencia con impresión sobre NT y me puede dar alguna idea -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: como se si puedo imprimir?
Yo, mi, me, conmigo.. me contesto: Instalé lpr, luego lprng, luego desinstale lprng (porque me dio problemas para imprirmir texto plano) y volví a instalar lpr. Desde entonces no he podido imprimir. Ahora he vuelto a instalar lprng e imprime de maravilla con el printcap que envié en el primer mensaje. Es decir, que no necesito smbclient (creo que no lo está utilizando). Existe algún problema conocido con este tema? se deja lprng algo por ahí que se carga el funcionamiento de lpr? ua cosa que observé es que después de hacer /etc/inid/lpd stop el lpd segúia funcionando. Estaba por ahí el de lprng? Si nadie sabe explicar esto tal vez sería bueno enviar un bug report, no? Un saludo Ignacio García Fernández [EMAIL PROTECTED] wrote: Tengo dos dudas: Una es que no se como saber si el lpd está corriendo o no (aparte de ps ax|grep lp). Con lpc no encuentro deferencia entre que el demoño esté corriendo y que no esté corriendo. Y la otra es porqué no me imprime :-) Ya se que esta segunda duda es un pelín demasiado general, pero a lo mejor alguien ve algo en el printcap o tiene experiencia con impresión sobre NT y me puede dar alguna idea -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Ximian en woody ¿qué paquetes he de poner como hold?
Hola, voy a actualizar el portátil a testing y tengo el ximian gnome 1.4 instalado en la Potato. ¿Qué paquetes de ximian he de poner en hold antes de actualizar para que me continúe funcionando correctamente? Gracias. Saludos, JUAN CARLOS AMENGUALBut I don't see UNIVERSIDAD JAUME I and I don't feel, DEPARTAMENTO DE INFORMÁTICA but tightly hold up silently my hands CAMPUS DE RIU SEC, EDIFICIO TI before my fading eyes CASTELLON, 12071. SPAIN.and in my eyes your smile. Phone: +34 964 728361 The very last thing before I go ... Fax: +34 964 728435 Robert Smith (The Cure) e-mail: [EMAIL PROTECTED] - The same deep water as you, Disintegration, 1989, Fiction Rec. -
Re: kernel-headers y kernel-source
Hola Andres, El jue, 26 de jul de 2001, a las 02:40:50 +0200, Andres Seco Hernandez dijo: Hola kernel-headers-2.2.19pre17-compact kernel-headers-2.2.19pre17-idepci kernel-headers-2.2.19-compact kernel-headers-2.2.19-idepci kernel-headers-2.2.19-ide kernel-headers-2.2.19 kernel-headers-2.2.19-sparc lo de kernel-headers-2.2.19-* especifica el tipo de kernel que se crea con ellos. Si miras en la parte de Info del CD 1 de Debian veras que existen un par de tipos distintos de kernels: el vanilla, el compact, el idepci, ... El tipico que se suele instalar con Debian es el kernel vanilla. El compact trae un par de cosas inhabilitadas, y tambien el ide-pci y el ide. El mas completo, el que trae todo habilitado es el vanilla (kernel-headers-2.2.19), los otros traen cosas inhabilitadas pero no me acuerdo cuales. En el primer CD de instalacion de Debian viene lo que tienen habilitado. Supongo que el sparc para intel no vale, está claro, pero ¿porqué es un paquete separado? ¿son diferentes las cabeceras para diferentes arquitecturas? Debe ser asi Si uso kernel-source-2.2.19pre17, ¿qué cabeceras debo usar? las dos pre17 no incluyen soporte SCSI? lo necesito, luego, ¿uso las cabeceras 2.2.19? ¿o cambio de kernel-source? El kernel-source-* viene con las cabeceras incluidas. Si usas la que no dice nada de compact, idepci, ide, ... o sea, el vanilla seguro que tiene el soporte SCSI. ciao y espero que te haya aclarado algo. Baltasar Perez (aka 'ponto') | ETSIT - ULPGC Powered by Debian GNU/Linux Woody (2.2.19) Linux user: #198228; ICQ: #71875480 http://www.libranet.com/petition.html - Nro. 84615 GnuPG: pub 1024D/3C9FACE7 fingerprint = 22E9 8141 658F A9C1 7782 A667 B694 28AC 3C9F ACE7
Re: como se si puedo imprimir?
On Thu, 26 Jul 2001 17:20:47 +0200 Ignacio García Fernández [EMAIL PROTECTED] wrote: Es decir que en realidad como cliente uno no tiene que configurar nada de samba. Se utiliza smbclient y a correr. Sólo un par de dudas, en el printcap pones /usr/local/sbin/smbprint y luego me dices que cree el script /bin/smbprint. Es un error o hay algo que no se? si claro se debia a un error mio al tipear :/ habria que poner /bin/smbprint en el printcap el USER y PASSWORD es por si tienes que logear en la maquina guindow$ para usar la impresora, sino dejalo asi. alternativamente tambien se puede con el smbclient mandar un archivo a imprimir por la red sin usar el lpd salut! jaume teixi.
Información sobre redes
Quisiera informarme sobre el montaje de una red en linux, es decir, si alguien sería tan amable de facilitarme alguna página donde me pueda informar de una forma sencilla y concisa, los pasos que debo dar para montar una red en linux(diseño de la red, manejo del enrutamiento,configuración del hardware...). Muchas gracias.
Re: Ximian en woody ¿qué paquetes he de poner como hold?
El d_ 26 Jul 2001 17:38:06 +0200, Juan C. Amengual escribi_ Hola, voy a actualizar el portátil a testing y tengo el ximian gnome 1.4 instalado en la Potato. ¿Qué paquetes de ximian he de poner en hold antes de actualizar para que me continúe funcionando correctamente? El Ximian GNOME que tienes que utilizar es el de potato, el de woody no lo están actualizando pues ya no lo mantienen hasta que Woody se congele. Los que yo tengo bloqueados son todos los de *gnomeprint*. Gracias. De nada. Saludos, JUAN CARLOS AMENGUALBut I don't see UNIVERSIDAD JAUME I and I don't feel, DEPARTAMENTO DE INFORMÁTICA but tightly hold up silently my hands CAMPUS DE RIU SEC, EDIFICIO TI before my fading eyes CASTELLON, 12071. SPAIN.and in my eyes your smile. Phone: +34 964 728361 The very last thing before I go ... Fax: +34 964 728435 Robert Smith (The Cure) e-mail: [EMAIL PROTECTED] - The same deep water as you, Disintegration, 1989, Fiction Rec. - -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Carlos Perelló Marín mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] http://www.gnome-db.org http://www.Hispalinux.es Valencia - Spain
Re: algo parecido a una red ;)
El mié, día 25 de jul de 2001, a las 01:36:51 -0500, Dr. Aldo Medina decía: 1. En la computadora con el modem, utilizar ipchains para agregar tu segunda computadora a la cadena forward como MASQ. Si quieres lee el COMO de MASQUEREADING. Bu, estoy sudando la gota gorda :-/ y es que ni con el IP Masquerade HOWTO me aclaro. ¿Alguna ayudita? 2. En la computadora cliente, utiliza route add para poner como gateway de default la primera computadora. Te recomiendo ambas estén en los /etc/hosts respectivos (aunque probablemente ya lo tengan). Ojalá no tengas problemas. Lo del route add default gw maquina_no_modem ya está, pero con el IP MASQ tengo un lío de mucho cuidado. Sigo leyendo... -- Fermín Manzanedo | Badajoz - Spain http://www.astrored.net/elsol | Usuario Linux #184967 Desde Toshiba2140CDS | Debian GNU/Linux 2.2 mail -s gpg public key [EMAIL PROTECTED] /dev/null
Re: algo parecido a una red ;)
Buenas otra vez ;) El jue, día 26 de jul de 2001, a las 09:50:01 +0200, Javier Fafián Alvarez decía: Es cierto, se me han olvidado un par de cosas: 1) # echo 1 /proc/sys/net/ipv4/ip_forward 2) /sbin/ipchains -A forward -s (ip-segundoordenador)/32 -d 0.0.0.0/0 -j MASQ Cuando ejecuto esta línea, me devuelve esto: ipchains: Protocol not available ¿A qué puede deberse? -- Fermín Manzanedo | Badajoz - Spain http://www.astrored.net/elsol | Usuario Linux #184967 Desde Toshiba2140CDS | Debian GNU/Linux 2.2 mail -s gpg public key [EMAIL PROTECTED] /dev/null
Re: Información sobre redes
El jue, día 26 de jul de 2001, a las 08:36:26 +0200, Juan Luis decía: Quisiera informarme sobre el montaje de una red en linux, es decir, si alguien sería tan amable de facilitarme alguna página donde me pueda informar de una forma sencilla y concisa, los pasos que debo dar para Hola, una buena guía es la GARL (Guía del Administrador de Redes Linux). Yo me la bajé del proyecto LuCAS (LinUx en CAStellano). La página no la recuerdo, pero no creo que tengas problemas para encontrarla con algún buscador. Saludos. -- Fermín Manzanedo | Badajoz - Spain http://www.astrored.net/elsol | Usuario Linux #184967 Desde Toshiba2140CDS | Debian GNU/Linux 2.2 mail -s gpg public key [EMAIL PROTECTED] /dev/null
Palm y Linux
¿Conoceis alguna direcciçon sobre Pañm que no den problemas luego si quiero interconectarla con mi Debian? Un saludo
Re: Correr script junto con el sistema
El Mié 25 Jul 2001 22:37, Lemus Moreno Jose A escribió: Sludos. Como puedo hacer para correr un script cuando el sistema arranca, o se reinicia. Pues no he podido. Les cuento lo que hago, priemro pongo mi escript en /etc/init.d y le dio permisos de ejecucion despues en rc1.d hago un link simbolico a /etc/init.d ejemplo K91miescript - /etc/init.d/miscript pero no me funcion a ver si alguien me hecha la mano. Eso que cuentas lo harías mejor con update-rc.d Para cosas poco importantes o si es un proceso de usuario lo más fácil es: crontab -e con algo como: @reboot fetchmail
Re: segmentation fault en uptimed
El Mié 25 Jul 2001 02:52, Andres Seco Hernandez escribió: Hola Hace algún tiempo que no miro lo que lleva mi equipo levantado, y ahora me encuentro con segmetation fault al hacer uprecords del paquete uptimed. Antes funcionaba, y solo he hecho dist-upgrades de potatosss 2.2r0 a r3 más security. ¿a alguien más le pasa? ¿alguna librería...? A mi me pasa desde que uso el kernel 2.4.3 en Potato. Con Potato 2.2r3 en otra máquina sigue funcionando.
Re: NVidia GForce 2 alguien la tiene andando?
Santiago Pastorino wrote: Quisiera saber si alguien tiene una GForce2, para que me cuente que tal anda, si le costo mucho configurarla, etc, etc, porque un amigo se va a comprar una y me pregunto que tal van con linux. Hola: Tengo una Geforce2 MX de 32 Megas y va perfectamente. Para configurarla estuve buscando en : http://www.escomposlinux.org/hardware/ y de allí fuí a: http://www6.tomshardware.com/graphic/00q3/000811/index.html Siguiendo las instruciones de esta última página punto por punto conseguí que funcionara perfectamente. Que haya suerte. Si no das con ello, escríbeme al correo (ultimamente paro poco por aquí) e intentaré ayudarte. Saludos para tí y para el grupo. Oscar González
Re: Palm y Linux
Aurelio Diaz-Ufano wrote: ¿Conoceis alguna direcciçon sobre Pañm que no den problemas luego si quiero interconectarla con mi Debian? ... Si estás buscando una Palm *marca Palm*, puedes ignorar el resto de este mensaje. Hace un par de meses hice una búsqueda en la red por alguna Linux friendly PDA... y terminé comprando una agenda. Es decir: una PDA marca Agenda, usa un chip NEC VR, a 66MHz, viene con 16MB de memoria flash y 8MB de RAM... y corre linux!, con X-windows, bash, etc... La conexión con otras máquinas linux es muy fácil: la conectas a un puerto serie, arrancas ppp y listo, ya puedes usar telnet, rsync, exportar la pantalla de x-windows, etc. Como PDA no es de las más rápidas (el full multitasking se hace sentir, aunque se pueden hacer algunos trucos para acelerarla un poco). Por otra parte, prácticamente todo el software que usa es GPL, puedes conseguirte el cross- compiler y desarrollar (o recompilar) tus propias aplicaciones, o ... todo lo que puedes hacer cuando el software es libre. Más información: -La página de mi agenda: http://cabmec1.cnea.gov.ar/~darie/agenda/ -La página de Agenda Computing: http://www.agendacomputing.com/ -Agenda Computing en Alemania: http://www.agendacomputing.de/ -- Saludos, O__ Enzo.,/ ()_\() Enzo A. Dari | Instituto Balseiro / Centro Atomico Bariloche 8400-S. C. de Bariloche, Argentina | [EMAIL PROTECTED] Phone: 54-2944-445208, 54-2944-445100 Fax: 54-2944-445299 Web page: http://cabmec1.cnea.gov.ar/darie/darie.htm
Re: router
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El Jue 26 Jul 2001 14:29, Andres Seco Hernandez escribió: Hola Si conectas directamente el router a la tarjeta de red del pc, independientemente de que lo tengas configurado como monopuesto o multipuesto, el cable debe ser cruzado. Yo juraría que ya viene con un cable cruzado. Por otra parte, ¿no preferiras hacer filtrado de puertos, a nivel del router y poner unos proxies a nivel de aplicación en el equipo? Hombre, es un poco más laborioso, pero es más seguro. Saludos. la situacion ahora es la siguiente, cable paralelo del router en multipuesto osea enmascarando, a la entrada line in de un switch, en las 8 bocas normales del switch otros tantos pc, unos linux otros windows, uno de los linux lo tengo digamos de servidor nfs, news, ircd interno, servidor apache de documentacion , asi como squid, la puerta de enlace de todos ellos es el router 192.168.0.10, y en los navegadores pues usar el squid de una de las maquinas asi como ftp. esto no obliga a nada a los usuarios desactivan si quieren el uso del proxy y a navegar directamente por el router. yo quisiera poner el efficient, en monopuesto, un linux con dos tarjetas de red, una con la ip publica que te da telefonica, y la otra con la privada, conectada a la boca line in del switch, y que la puerta de enlace para los equipos fuera esta, de este modo les obligaria a pasar por este equipo que se encargaria del enmascaramiento y poder poner un cortafuegos asi como poner un dns para gestionarnos nuestro correo. mis dudas: hay que hacer toda esta pelicula o se puede configurar este router en particular de manera que en monopuesto o multipuesto, todo lo que llegue de internet pase por una maquina en particular, supongo que a esto la respuesta sea SI, pero y todo lo que sale, en los linux si no hay permiso pues bien, pero los windows entiendo que podrian seguir haciendo lo que les diera la gana. ademas no tengo claro que si es el router el que hace nat, no vaya a tener problemas con el icq por ejemplo que creo que envia la ip y si es privada. ya entraremos en los cables que tengo que cambiar. gracias por las respuestas, explayaros con toda confianza... -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7YKrNCVa0P72y9qYRAp5YAKD4mH3sii2JO7zOhwOky5etc12SRwCgmKsn XKF7pAKjPcnqda2Q/CqybJE= =EMmG -END PGP SIGNATURE-
Re: Correr script junto con el sistema
Intenta, una vez copiado el script tuyo en /etc/init.d, realizar lo siguiente (donde 'nombrescript' es el nombre que le has dado a tu script en el directorio /etc/init.d). Y recuerda darle permisos de ejecución (IMPORTANTE): Ejecutas en el shell (como root) lo siguiente: # update-rc.d nombrescript defaults 91 Entonces te debería funcionar, sea cual sea el runlevel por el que arranques. En el caso de que quieras más detalles, busca en las FAQ de debian (que están en español). En las FAQ que yo tengo, lo que te digo aparece en el capítulo 12 (en una de las partes). Ten en cuenta que puede haber variado un poco y no estar en ese mismo capítulo... Suerte, y espero haber ayudado El mié, 25 jul 2001, Lemus Moreno Jose A escribió: Sludos. Como puedo hacer para correr un script cuando el sistema arranca, o se reinicia. Pues no he podido. Les cuento lo que hago, priemro pongo mi escript en /etc/init.d y le dio permisos de ejecucion despues en rc1.d hago un link simbolico a /etc/init.d ejemplo K91miescript - /etc/init.d/miscript pero no me funcion a ver si alguien me hecha la mano. -- INTRUDER A3 UNIX C Corp - -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Einar Matveinen Hörkkutröllin hraeða geð rimÞursarnir fornir dvergar álvar draugar með dísir völvur nornir -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Problema con eth0
Tengo una tarjeta de red bastante común para linux, una 3Com (no es nada novedosa). Estoy intentando configurarla mediante ifconfig, pero no hay forma. El kernel ya está compilado (creo que bien, aunque si hay sugerencias al respecto las agradeceré...). Pero al ejecutar el comando ifconfig de la forma: # ifconfig eth0 numIP netmask numNETMASK up el shell me responde con lo siguiente: SIOCSIFADDR: No existe tal dispositivo eth0: unknown interface: No existe tal dispositivo SIOCSIFNETMASK: No existe tal dispositivo eth0: unknown interface: No existe tal dispositivo Por lo que no se configura bien el interface eth0... Muchas gracias...
Re: Problema con eth0
Verifica que tienes cargado el módulo, lanza lsmod y mira a ver si tienes el modulo de tu tarjeta. Yo suelo buscar el modulo con modconf y lo cargo desde ahí, para que se monte al iniciar el sistema. El 25 Jul 2001 a las 11:12PM +0200, heissu escribio: Tengo una tarjeta de red bastante común para linux, una 3Com (no es nada novedosa). Estoy intentando configurarla mediante ifconfig, pero no hay forma. El kernel ya está compilado (creo que bien, aunque si hay sugerencias al respecto las agradeceré...). Pero al ejecutar el comando ifconfig de la forma: # ifconfig eth0 numIP netmask numNETMASK up el shell me responde con lo siguiente: SIOCSIFADDR: No existe tal dispositivo eth0: unknown interface: No existe tal dispositivo SIOCSIFNETMASK: No existe tal dispositivo eth0: unknown interface: No existe tal dispositivo Por lo que no se configura bien el interface eth0... Muchas gracias... -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Andres Seco Hernandez- [EMAIL PROTECTED] MCP ID 445900 - http://andressh.alamin.org GnuPG public information: pub 1024D/3A48C934 E61C 08A9 EBC8 12E4 F363 E359 EDAC BE0B 3A48 C934 -- Alamin GSM SMS Gateway - http://www.alamin.org Debian GNU/Linux - http://www.debian.org Grupo de Usuarios de GNU/Linux de Guadalajara y alrededores - http://gulalcarria.sourceforge.net -- pgpEUPlKtp4YC.pgp Description: PGP signature
Como reinstalo el paquete dpkg
no hace mas que darme problemas el script install-info que se ejecuta en los scripts que estan en /var/lib/dpkg/info/*.postins|preinst|prmr, tengo que comentar las lineas en que se ejecta install-info para que termine las instalaciones. Como el script install-info pertenece al paquete dpkg quiero reinstalarlo, pero como lo hago, si lo borro, ¿no extropeo el sistema de paquetes para luego reinstalarlo?, ¿que comando y que opciones debería usar para no cagarla? P.D: da menos trabajo hacer preguntas tontas que corregir errores estupidos... -- ___ ___ ____ _ ___ | - / \ | -\/ / - \ | _ \ | | | | \ | | | SALUDOS |___/ \___/ |_|\_\ _/\_ |_|_|
Re: Como reinstalo el paquete dpkg
El Vie 27 Jul 2001 03:30, 31 escribió: no hace mas que darme problemas el script install-info que se ejecuta en los scripts que estan en /var/lib/dpkg/info/*.postins|preinst|prmr, tengo que comentar las lineas en que se ejecta install-info para que termine las instalaciones. Como el script install-info pertenece al paquete dpkg quiero reinstalarlo, pero como lo hago, si lo borro, ¿no extropeo el sistema de paquetes para luego reinstalarlo?, ¿que comando y que opciones debería usar para no cagarla? Creo que te he entendido. Prueba sin temor: apt-get --reinstall install dpkg P.D: da menos trabajo hacer preguntas tontas que corregir errores estupidos...
consulta-mount-nfs
Hola a todos, Alguien sabria decirme donde se puede conseguir info detallada sobre nfs, quiero compartir recursos entre pc's linux; como se montan los recursos en nfs, etc., por que pongo: (estoy usando el nfs-kernel-server) mount server:/pub /pub y me dice mount: RPC: Programa no registrado si debo declarar el mount, donde se hace? Otra: que es mejor el nfs-kernel-server ó el nfs-server, hay otro metodo mejor que se utilise comunmente para compartir recursos? Saludos y gracias de antemano Fabian --- Ad Augusta per angusta --- pgpMCbaw9bY5D.pgp Description: PGP signature
Re: Svenska tecken i konsolen (Testing, tcsh)
On Wed, Jul 25, 2001 at 02:21:18PM +0200, [EMAIL PROTECTED] wrote: Det grubblades på detta för ett tag sen på den här lisan. Kolla arkiven. Tittade runt lite, borde givetvis ha tittat dör först tänkte dock inte på att et fanns arkiv... Hittade ett tips om locale.gen som tyvärr inte gjorde någonsomhelst skilland. (och att editera inputrc såsom jag gjort samt sätta LANG, LC_CTYP, LESSCHARSET som jag också tyvärr redan gjort) Jag har för mig att det var såhär: I en fräsht installerad potato, i filen /etc/xinitrc, så finns det längst ned en rad som är bortkommenterad. Jag minns inte vad det står där, men det mumlas något om Uncomment this for german umlauts. Beware that it may f**k up your meta key (right alt). NÅGOT åt det hållet. Jag sitter inte till så att jag kan kolla exakt just nu, tyvärr. Ta bort kommenteringen på den. Någon xinitrc har jag inte men väl en initrc och där har jag lagt till set convert-meta off för att få konstiga tecken och mista min meta tgt :) Tyvärr har jag dock fortfarande inga åäö i mutt eller i shellet. Fick också tipset att använda vim istället för vi, och visst även i vim fungerar åäö. Jag kan också tex göra en sak som denna: cat testfil åäö ^D och få en testfil med åäö i (åäö visas korrekt när jag använder cat) Jag kan dock inte doch inte döpa en fil till något med åäö i och jag inte gör ett litet skript som skapar en fil med åäö i filnamnet, tex: #!//bin/sh cat åäöfil Kör jag sedan detta skript så får jag en fil med åäö i namnet men i mitt shell ser den ut som ???fil vid tex ls. Tacksam för fler tips, Kanske måste jag kompilera om alla shell (och mutt) för att explisivt stödja åäö ? mvh Tobias.
Re: Svenska tecken i konsolen (Testing, tcsh)
On Thu, Jul 26, 2001 at 09:09:03AM +0200, Tobias Elfstrom wrote: Kör jag sedan detta skript så får jag en fil med åäö i namnet men i mitt shell ser den ut som ???fil vid tex ls. I alla fall i zsh som jag kör så är ls inte en del av shellet, utan ett eget kommando. Följande funkar för mig: % export LC_CTYPE=sv_SE.ISO-8859-1 % ls åäöfil % Tacksam för fler tips, Kanske måste jag kompilera om alla shell (och mutt) för att explisivt stödja åäö ? Det ska definitivt inte behövas.
Forward da msg do Francisco
Começo da mensagem encaminhada: Date: Wed, 25 Jul 2001 19:07:20 -0300 From: Francisco Maciel [EMAIL PROTECTED] To: Gustavo Noronha Silva [EMAIL PROTECTED] On Tue, 24 Jul 2001 02:00:07 -0300 Gustavo Noronha Silva [EMAIL PROTECTED] wrote: ... é verdade... acho que a woody já é uma escolha... tenho de fazer outra instalação do potato e fazer o upgrade pra medir a dificuldade, mas acho que vai sem problemas... os problemas mais feios do console-* parecem ter sido resolvidos... alguém sabe? Estou usando já tem três semanas e até o momento o único problema é apenas com os sons no Gnome que insistem em contunuarem mesmo quando desmarco o servidor de som no painel de controle. O restante funciona redondinho... blz... []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | ** -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007. -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Re: Ops! RES: Facilidade do Debian (era: Encontro dos usuários pernambucanos)
Instalar não é o verdadeiro problema, o que realmente pega é a configuração, e a dificuldade de configurar um sistema GNU/Linux é diretamente proporcional ao hardware que você possui, não importa se você for usar debian, red hat, etc..., se você tiver algum hardware não suportado pela distribuição escolhida você vai ter dor de cabeça. Essas dificuldades exigem mais do usuario que pretende usar o sistema e muitas vezes acabam espantando. Com toda a documentacao disponivel, apesar de muitas vezes descrita para distribuicao X ou entao em outra lingua, eh possivel com um pouco de disposicao aprender o necessario para configurar o sistema. Mas a maioria das pessoas nao tem essa disposicao, querem apenas olhar seu email ou fazer trabalhos escolares, tudo com poucos clicks e sem complicacoes. Como ja foi dito, interfaces graficas que sejam realmente solidas e nao tapa-buracos podem ser muito bem-vindas (eh bem-vindas mesmo ou eh tudo junto, bemvindas? hehe). ;) -- Mateus Inacio Trevisan (rato) Debian GNU/Linux: when code matters more than commercials. Religion is the opium of people.
Temas do Blackbox
Ol? lista, essa ? para os fans do blackbox: Por nescessidade (realmente n?o estou acostumado a usar m?quinas mais antigas) passei a usar o blackbox, mas terminei me engra?ando com o bichinho. Depois disso tentei botar uns temas nele, fui no bb.themes.org e achei uns temas bem bonitos, briguei um bocado para que aparecerem no meu menu mas consegui, a partir dai que n?o consegui ir muito longe, os temas que tem imagem de fundo n?o funcionam (a imagem de fundo), alguem j? passou por isso? ps.: Cad? o pessoal de pernambuco? Ainda existe usu?rios debian aqui? []'s --==: Rodrigo Morais Araujo :==-- --==: :==-- --==:[EMAIL PROTECTED]:==--
Re: RES: Internacionalização, ortografia e shutdown
Desculpe a insistência, mas creio que o que você quer é com o ispell, sim. Veja se o que você quer não é: # ispellconfig Espero ter ajudado. Oi, Itamar! Tão simples, tão intuitivo e tão óbvio que eu não conseguia ver. Obrigado pela ajuda. Ivan Conheça Ubbi! O melhor serviço gratuito de criação e hospedagem de home pages. http://www.ubbi.com.br/homepage http://www.cidadeinternet.com.br
Debian escolhida para sistema de votação na Austrália
From: Edgard Lemos [EMAIL PROTECTED] http://it.mycareer.com.au/news/2001/07/24/FFXL76U4HPC.html A única plataforma que ofereceu robustez e confidencialidade do voto foi GNU Debian Linux, com todo seu código fonte lançado sob a GPL (General Public License). [ ]'s [EMAIL PROTECTED] www.hackhour.com.br Hack Hour Inc.
Re: [gulp] GRUB Gráfico
Olá! Tô respondendo tarde assim porque tava de férias... :)) On Mon, Jul 02, 2001 at 10:25:57AM -0300, Rodrigo Gruppelli wrote: Gente. Aquele GRUB gráfico é hack da conectiva ou dá pra fazer com o GRUB normal mesmo? Pq eu tentei e nao deu... :\ O Paulo César, nosso desenvolvedor do XFree e que fuçou no GRUB também, preparou esta modificação para o GRUB suportar modos gráficos simples, porém o pessoal do GRUB não aceitou. Como nós achamos interessante, mantivemos no nosso GRUB. :) -- Fábio Olivé Leite · http://www.conectiva.com.br/~olive ·Never whiss while you pistle, or something like that·
configuracao gnome
Oi pessoal, Ainda estou tentando configurar o gnome, ou seja aparece o icone so que o mouse nao movimenta fica o (x) no meio da tela. ja coloquei os ttyS (0 ate 3) e nao funcionou. adquiri este linux debian em revista arquivo linux greep. tambem ate agora nao consegui configurar o modem motorola hsp 56 speakfone estou ansioso para testar o sistema grafico e entrar na internet via linux, que abandonar rwindow$ por favor detalhe o maximo possivel, ja tenho algum meses que instalei linux, soh que devido o trabalho estou estudando o sistema somente a noite, ainda me considero leigo. apesar de conhecer moderadamente o sistema. aguardo ajuda pessoal Carlúcio
Perl
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Galera , alguem já passou por esse problema ? Toda aplicação que usa perl dá esse aviso locale not supported by C library Como posso achar uma possível solução ? // www.hardbeat404.f2s.com // Coders Forum ! - http://codersforum.tux.nu // Debian News? http://www.debianplanet.org // ICQ/Licq: #72974241 // Linux Registered User: #220025 -BEGIN PGP SIGNATURE- Version: PGPfreeware 7.0.3 for non-commercial use http://www.pgp.com iQA/AwUBO2Bc0LvphCHEu7TmEQLEMQCg1OLKBVV2fZmER0nqT3sFk4zFjNwAn20O gJh8UnE4yiOh60GkTZJg3etw =KUwH -END PGP SIGNATURE-
Re: [gulp] GRUB Gráfico
On Thu, 26 Jul 2001, Fabio Olive Leite wrote: O Paulo César, nosso desenvolvedor do XFree e que fuçou no GRUB também, preparou esta modificação para o GRUB suportar modos gráficos simples, porém o pessoal do GRUB não aceitou. Como nós achamos interessante, mantivemos no nosso GRUB. :) Hmm... eu estou interessado. Vou dar uma olhada no patch, e dependendo do que ele implica, posso passar a manter um pacote não-oficial do Grub pro Debian com o patch de vocês. Afinal de contas, como podemos ter um Grub com supore a japonês sem um fb gráfico? (e haja bloat...) ;-) -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh
Re: configuracao gnome
Em Thu, 26 Jul 2001 14:12:40 -0300 tropical colchoes ltda [EMAIL PROTECTED] escreveu: Oi pessoal, alô, deixe-me pedir de novo.. .não mande email em html... duplica o tamanho das mensagens e atrapalha todo mundo da lista... Ainda estou tentando configurar o gnome, ou seja aparece o icone so que o mouse nao movimenta fica o (x) no meio da tela. ja coloquei os ttyS (0 ate 3) e nao funcionou. seu mouse por acaso é ps/2??? se for, o device do seu mouse é /dev/psaux adquiri este linux debian em revista arquivo linux greep. Debian GNU/Linux -- não esqueça do GNU... é importante tambem ate agora nao consegui configurar o modem motorola hsp 56 speakfone por acaso ele é winmodem? http://www.linmodems.org []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Re: [gulp] GRUB Gráfico
Olá! On Thu, Jul 26, 2001 at 03:17:37PM -0300, Henrique de Moraes Holschuh wrote: Hmm... eu estou interessado. Vou dar uma olhada no patch, e dependendo do que ele implica, posso passar a manter um pacote não-oficial do Grub pro Debian com o patch de vocês. Ótimo! :) Deves encontrar o patch no nosso pacote mais atual, acessando http://snapshot.conectiva.com/ . Afinal de contas, como podemos ter um Grub com supore a japonês sem um fb gráfico? (e haja bloat...) ;-) Bom, aí o interessante vai ser como vocês vão fazer para colocar o menu em Japonês, hehehe. :) Abraço Fábio -- Fábio Olivé Leite · http://www.conectiva.com.br/~olive ·Never whiss while you pistle, or something like that·
Re: [gulp] GRUB Gráfico
Em Thu, 26 Jul 2001 15:47:17 -0300 Fabio Olive Leite [EMAIL PROTECTED] escreveu: Afinal de contas, como podemos ter um Grub com supore a japonês sem um fb gráfico? (e haja bloat...) ;-) Bom, aí o interessante vai ser como vocês vão fazer para colocar o menu em Japonês, hehehe. :) heh... você não sabe o que os devels japoneses são capazes ;) o próximo passo é internacionalizar o grub e colocar suporte a fontes malucas hehehe =) eu adoro o Debian =) []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Re: Temas do Blackbox
On Thu, 26 Jul 2001 00:50:43 -0300 (EST) Rodrigo Morais Araujo [EMAIL PROTECTED] wrote: Olá lista, essa é para os fans do blackbox: Por nescessidade (realmente não estou acostumado a usar máquinas mais antigas) passei a usar o blackbox, mas terminei me engraçando com o também sou adepto dele!. bichinho. Depois disso tentei botar uns temas nele, fui no bb.themes.org e achei uns temas bem bonitos, briguei um bocado para que aparecerem no meu menu mas consegui, a partir dai que não consegui ir muito longe, os temas que tem imagem de fundo não funcionam (a imagem de fundo), alguem já passou por isso? é comun nos temas para Blackbox, com wallpapers, a última linha do arquivo constar o local da imagem.jpg(por exemplo), confira se está correto!... ps.: Cadê o pessoal de pernambuco? Ainda existe usuários debian aqui? []'s --==: Rodrigo Morais Araujo :==-- --==: :==-- --==:[EMAIL PROTECTED]:==-- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007.
Re: configuracao gnome
Gustavo escreveu: alô, deixe-me pedir de novo.. .não mande email em html... duplica o tamanho das mensagens e atrapalha todo mundo da lista... sera que eh por que estou usando o outlook ?
Re: configuracao gnome
Em Thu, 26 Jul 2001 16:50:03 -0300 tropical colchoes ltda [EMAIL PROTECTED] escreveu: Gustavo escreveu: alô, deixe-me pedir de novo.. .não mande email em html... duplica o tamanho das mensagens e atrapalha todo mundo da lista... sera que eh por que estou usando o outlook ? sim... ele usa email em html como padrão heheh =) []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Re: Temas do Blackbox
On Thu, 26 Jul 2001, Francisco Maciel wrote: On Thu, 26 Jul 2001 00:50:43 -0300 (EST) Rodrigo Morais Araujo [EMAIL PROTECTED] wrote: Ol? lista, essa ? para os fans do blackbox: Por nescessidade (realmente n?o estou acostumado a usar m?quinas mais antigas) passei a usar o blackbox, mas terminei me engra?ando com o tamb?m sou adepto dele!. bichinho. Depois disso tentei botar uns temas nele, fui no bb.themes.org e achei uns temas bem bonitos, briguei um bocado para que aparecerem no meu menu mas consegui, a partir dai que n?o consegui ir muito longe, os temas que tem imagem de fundo n?o funcionam (a imagem de fundo), alguem j? passou por isso? ? comun nos temas para Blackbox, com wallpapers, a ?ltima linha do arquivo constar o local da imagem.jpg(por exemplo), confira se est? correto!... J? tinha notado isso, mas ainda n?o ? esse o problema. J? notei tamb?m que o problema ? que n?o tenho os aplicativos que eles usam para setar o background, tipo xv, Esetroot, que j? fiz de tudo para achar onde ficam eses danados e n?o encontrei at? agora!!! Em quais pacotes encontro esses programas? ps.: Cad? o pessoal de pernambuco? Ainda existe usu?rios debian aqui? []'s --==: Rodrigo Morais Araujo :==-- --==: :==-- --==:[EMAIL PROTECTED]:==-- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] --==: Rodrigo Morais Araujo :==-- --==: :==-- --==:[EMAIL PROTECTED]:==--
Re: Internacionalização , ortografia e shutdown
Em Tue, Jul 24, 2001 at 01:03:11PM -0300, Pablo Lorenzzoni escreveu: Olah Ivan! Em Ter 24 Jul 2001 10:29, [EMAIL PROTECTED] escreveu: | Oi, Pablo! | | Já comecei a baixar o KDE 2. Dentro de um mês poderei usá-lo. Meu | modem é 33,6 :) Eh... a velocidade do modem (e das linhas de telefonia brasileiras) eh realmente um problema. Qto a isso soh tenho uma dica: vc jah usou netselect (apt-get install netselect)? Ele pode te ajudar a escolher o melhor mirror do Debian em termos de velocidade (BTW, KoV: acho que o netselect merece umas duas linhas no Guia Pratico, naum?) O programa apt-spy é mais confortavel para isto... -- Alexandre Pereira da Silva http://aletes.net ICQ#: 22163948 Tel: (11) 93830810
Re: Internacionalização, ortografia e shutdown
Em Ter 24 Jul 2001 16:38, Alexandre Pereira da Silva escreveu: | Em Tue, Jul 24, 2001 at 01:03:11PM -0300, Pablo Lorenzzoni escreveu: | Olah Ivan! | | Em Ter 24 Jul 2001 10:29, [EMAIL PROTECTED] escreveu: | | Oi, Pablo! | | | | Já comecei a baixar o KDE 2. Dentro de um mês poderei usá-lo. | | Meu modem é 33,6 :) | | Eh... a velocidade do modem (e das linhas de telefonia | brasileiras) eh realmente um problema. Qto a isso soh tenho uma | dica: vc jah usou netselect (apt-get install netselect)? Ele pode | te ajudar a escolher o melhor mirror do Debian em termos de | velocidade (BTW, KoV: acho que o netselect merece umas duas | linhas no Guia Pratico, naum?) | | O programa apt-spy é mais confortavel para isto... Voce tem razao, eu uso o apt-spy ao inves do netselect! Mas o potato ainda naum tem o apt-spy e como (segundo a ultima pesquisa do debianplanet) 48% dos Debian users usam o potato... o netselect beneficiaria esses usuarios. Apesar disso, quero deixar registrado que a compilacao do apt-spy eh bem simples... ateh um usuario comum consegue fazer. Seria interessante para os usuarios de potato compilar o apt-spy. []s Pablo P.S. Eu ainda uso o netselect, pq ele verifica a velocidade de qq host, naum soh dos que tem na lista dos mirrors. -- Pablo Lorenzzoni (Spectra) [EMAIL PROTECTED] GnuPG PubKey at search.keyserver.net (Key ID: 268A084D) Webpage: http://people.debian.org/~spectra/
Re: xfonts-75dpi ou 100dpi?
dpkg -l x* isto vai mostrar os pacotes instalados comecados por x, entao verifique se o xfonts-100dpi e o xfonts-75dpi estao instalados. Caso seja sim, entao desinstale o 100dpi deixando o 75dpi. O sistema ira automaticamente usar o 75dpi. Foi assim que eu fiz e deu certo! []´s Kleber Leal -- Mensagem original -- From: [EMAIL PROTECTED] Quero diminuir as letras do meu desktop. Devo usar 75 ou 100dpi? Tenho os dois fonts instalados, mas como saber qual esta sendo utilizado? Consegui. Use 75dpi e tudo fica OK! Como eh que eu faco para mudar a fonte de 100dpi para 75 dpi ?!?!?!? [ ]'s [EMAIL PROTECTED] www.hackhour.com.br Hack Hour Inc. ___ http://www.zipmail.com.br O e-mail que vai aonde você está.
Comfigurar a Zip 100 Paralela.
Oi Lista, Quando eu perguntei como e que se configurava a zip 100 paralela, disseram-me para fazer modprobe ppa, e o resultado foi o seguinte: :~#modprobe ppa /lib/modules/2.2.19pre17/scsi/ppa.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.2.19pre17/scsi/ppa.o: insmod /lib/modules/2.2.19pre17/scsi/ppa.o failed /lib/modules/2.2.19pre17/scsi/ppa.o: insmod ppa failed E quando tentei modprobe imm foi este o resultado: :~# modprobe imm /lib/modules/2.2.19pre17/scsi/imm.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.2.19pre17/scsi/imm.o: insmod /lib/modules/2.2.19pre17/scsi/imm.o failed /lib/modules/2.2.19pre17/scsi/imm.o: insmod imm failed Por um descargo de consciência tentei mount /dev/sda /zip, mas não encontrou o depositivo. Experimentei com a zip sozinha ligada a pp e com a zip e a impressora em paralelo, Nenhuma deu. Espero ter fornecido os dados todos para que me possam ajudar. Obrigado || | http://linuxkid.no.sapo.pt | | http://www.linuxkid.cjb.net | |--| | |\~~/| Daniel Costa | | \ õõ / [EMAIL PROTECTED]| | '-v-' | ||
Netscape com botoes PB
Uso a versao 4.76 do Netscape baixado da debian no potato. Os botoes sao PB, mas jah vi varios screenshots com botoes coloridos. Eh falta de configuracao ou fiz alguma coisa errada ao baixa-lo?! []s Andre Pompeu
Re: Netscape com botoes PB
Existe um bug que faz ele ficar assim quando o display esta em 32bits. Baixe para 24... Em Thu, Jul 26, 2001 at 10:10:35PM -0400, apompeu escreveu: Uso a versao 4.76 do Netscape baixado da debian no potato. Os botoes sao PB, mas jah vi varios screenshots com botoes coloridos. Eh falta de configuracao ou fiz alguma coisa errada ao baixa-lo?! []s Andre Pompeu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Alexandre Pereira da Silva http://aletes.net ICQ#: 22163948 Tel: (11) 93830810, 58351996
Re: Internacionalização, ortografia e shutdown
Em Thu, 26 Jul 2001 19:35:39 -0300 Pablo Lorenzzoni [EMAIL PROTECTED] escreveu: Voce tem razao, eu uso o apt-spy ao inves do netselect! Mas o potato ainda naum tem o apt-spy e como (segundo a ultima pesquisa do debianplanet) 48% dos Debian users usam o potato... o netselect beneficiaria esses usuarios. Apesar disso, quero deixar registrado que a compilacao do apt-spy eh bem simples... ateh um usuario comum consegue fazer. Seria interessante para os usuarios de potato compilar o apt-spy. hmmm e que tal uma seção sobre ele pro prático? afinal de contas, o prático era pra ser sobre o woody, básicamente =) []s! /me que a cada dia se impressiona mais com o tanto que o Debian é bom e ele não sabia... e olha que ele já achava Debian o melhor ;) -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Re: configuracao gnome
O Debian que instalei aqui em casa (potato 2.2 r3) também veio numa revista (não nessa que você mencionou), Tem duas semanas que instalei ele e por enquanto aparentemente está tudo certo. Se quiser tentar reinstalar, copio o cd e te mando pelo correio, e só mandar o endereço. João Alberto Ferreira. - Original Message - From: tropical colchoes ltda To: Debian Sent: Thursday, July 26, 2001 2:12 PM Subject: configuracao gnome Oi pessoal, Ainda estou tentando configurar o gnome, ou seja aparece o icone so que o mouse nao movimenta fica o (x) no meio da tela. ja coloquei os ttyS (0 ate 3) e nao funcionou. adquiri este linux debian em revista arquivo linux greep. tambem ate agora nao consegui configurar o modem motorola hsp 56 speakfone estou ansioso para testar o sistema grafico e entrar na internet via linux, que abandonar rwindow$ por favor detalhe o maximo possivel, ja tenho algum meses que instalei linux, soh que devido o trabalho estou estudando o sistema somente a noite, ainda me considero leigo. apesar de conhecer moderadamente o sistema. aguardo ajuda pessoal Carlúcio
Servidor Archie.
Alguém aí alguma vez já conseguiu se conectar a um servidor Archie? alguém conhece algum que esteja oferecendo esse serviço? Abraços! João Alberto.
Re: good sound cards?
You can get a Delta 44 for $260.oo {midi/24/96} at marsmusic.com, Audiophile
cards for a bit less.
Sorry, strike the midi. Adapters are cheapish though.
I think your best bets are to scan:
http://www.marsmusic.com
http://www.musiciansfriend.com
http://sweetwater.com/
and compare them to the charts at OSS and Alsa. Lots of good high quality
cards are supported. Lots of folk are starting to put out their own drivers.
debian: Recommendation for scanner/printer/fax/copier
Hi, I'm running an Apple Titanium G4 and an Intel Pentium-II machine (both with Debian ofcourse). I would like to purchase a scanner but would also like to be able to do photocopies. I could use a computer to scan then print but that can be a bit inefficient. I was thinking of an all in one unit that HP, Cannon or maybe Brother produce. Are there any recommendations from other Linux users. I would prefer a Laser printing engine but they seem harder to come by. I would also prefer a printer with inbuilt postscript (I always have seem to have problems with ghostscript). I think USB is the way to go though an ethernet connection would be even better. If there is nothing suitable then recommendations on individual products would be greatly appreciated. Thanks, Brendan Simon.
apt-get build-deps not working ?
Hi all, I am trying to build a package from source but get the following error: bash-2.04# apt-get build-dep cdrecord E: Invalid operation build-dep Anyone has any idea as to what might be wrong? Thanks, Remco -- ICQ: 760542, Tel: (+31) 6 11316573, http://www.webconquest.com -*- Zippy's revelation of the moment: -*- If elected, Zippy pledges to each and every American a 55-year-old houseboy ...
Re: ipchains rules: REJECT vs. DENY
On Wed, 25 Jul 2001 17:12:22 PDT, Alvin Oga writes: Moral of that story is to make sure that you either run an ident server, or set it to REJECT. Well, I wouldn´t (and don´t) run identd, since I have no intention of revealing the name of the user running a particular service (in if one runs identd... any incoming email address to [EMAIL PROTECTED] will get returned/bounced back to the sender as no such user... ( you see a log in maillog etc that they tried to send soemthing ) if you dont run identd... you receive and store that email addressed to fake and bounced locally to root/postmaster as non-deliverable locally ?? If my box would take mail for non-existent accounts it would have to bounce them to the envelope-from, not some [EMAIL PROTECTED]. That has nothing to do with ident. Take one of my mails to debian-user as example: Received: from ka.graffl.net ([EMAIL PROTECTED]) by murphy.debian.org with SMTP; 25 Jul 2001 23:24:41 - Received: from WatchZwerg.waldner.priv.at ([EMAIL PROTECTED] [193.80.224.98]) by ka.graffl.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id BAA08314 for debian-user@lists.debian.org; Thu, 26 Jul 2001 01:24:38 +0200 The only source of mails to [EMAIL PROTECTED] or [EMAIL PROTECTED] are spammers, but such clueless ones usually also try to send mails to the message-id... But of course sendmail does the right thing (it´s not exchange or bloatus notes), it never even stores mails to unknown accounts, it just issues a 5xx (no such luser) in the smtp-conversation and that´s it. rcpt to:[EMAIL PROTECTED] 550 [EMAIL PROTECTED]... User unknown rcpt to:[EMAIL PROTECTED] 550 [EMAIL PROTECTED]... User unknown cheers, rw -- -- My name is sendmail.cf. -- You killed my process. -- Prepare to vi. pgpZJbU2DtX2d.pgp Description: PGP signature
Re: apt-get build-deps not working ?
On Thu, Jul 26, 2001 at 05:26:32AM +, Remco Rijnders wrote: Hi all, I am trying to build a package from source but get the following error: bash-2.04# apt-get build-dep cdrecord E: Invalid operation build-dep Anyone has any idea as to what might be wrong? What version of apt do you have? This feature is only in versions = 0.5.0.
Getting CPU model and speed without rebooting
I want to get the CPU's model and speed without rebooting. /proc/cpuinfo (to me anyway) is useless. Unless someone knows how to convert: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) To a PIII/450? -- Danie Roux *shuffle* Adore Unix PS Output from a Dec Alpha's cpuinfo: cpu : Alpha cpu model : Unknown cpu variation : 0 cpu revision: 0 cpu serial number : Linux_is_Great! ...
Re: Getting CPU model and speed without rebooting
On Thu, 26 Jul 2001, Danie Roux wrote: I want to get the CPU's model and speed without rebooting. /proc/cpuinfo (to me anyway) is useless. Unless someone knows how to convert: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) To a PIII/450? A few lines down you should see something like: cpu MHz : 199.906 That should give you the speed. and you already know (from above) the model. Failing that the messages generated at boot are available in dmesg ie dmesg|egrep 'Detected.*MHz processor' Detected 199.906 MHz processor. I don't have access to any alphas but the above holds true for spark. Yours Tony. /* * The significant problems we face cannot be solved at the * same level of thinking we were at when we created them. * --Albert Einstein */
Re: Getting CPU model and speed without rebooting
On Thu, 26 Jul 2001, Danie Roux wrote: I want to get the CPU's model and speed without rebooting. /proc/cpuinfo (to me anyway) is useless. Unless someone knows how to convert: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) ... cpu MHz : 449.125 model name gives you pentium 3, cpu MHz gives you 450. To a PIII/450? -- A computer without windoze is like a fish without a bicycle. Who is John galt? [EMAIL PROTECTED], that's who. Finger me for PGP public key.
RE: Getting CPU model and speed without rebooting
None of my machines give MHz... only bogomips Next Question What is a bogomip ??? processor: 0 cpu: 686 model: NULL vendor_id: GenuineIntel stepping: 3 fdiv_bug: no hlt_bug: no f00f_bug: no fpu : yes fpu_exception : yes cpuid : yes wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov 16 17 18 mmx 24 25 bogomips: 450.56 Ian
RE: Getting CPU model and speed without rebooting
On Thu, 26 Jul 2001, Ian Perry wrote: None of my machines give MHz... only bogomips Next Question What is a bogomip ??? It used to be the number of millions of time the processor could run: inc jmp -1 Ie how high it can count in a second. The number recently took a major jump so it may mean something else now. It no real correlation to processor speed. processor: 0 cpu: 686 model: NULL vendor_id: GenuineIntel stepping: 3 fdiv_bug: no hlt_bug: no f00f_bug: no fpu : yes fpu_exception : yes cpuid : yes wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov 16 17 18 mmx 24 25 bogomips: 450.56 H what does uname -a say ??? Yours Tony. /* * The significant problems we face cannot be solved at the * same level of thinking we were at when we created them. * --Albert Einstein */
RE: CD-RW Question...
On 25-Jul-01 Aaron Traas wrote: I have a question... Could someone please recommend a reliable IDE/ATAPI CD-RW that works out-of-the-box with Debian? Like, something I could just plug in and start burning. Also, I'd like one that isn't too picky about different brands of media. The Ricoh in my Win98 box isn't that reliable, and doesn't like Memorex and other common brands of CD-R blanks. I installed a RICOH first time round, and wasn't too happy with it (principally because it was quite unreliable about detecting the CD for reading -- about 2 failures in 5 -- but it also didn't properly locate the start of the CD when writing). As a result, the shop changed it for an LG CED-8989B which seems to work perfectly well in both directions. Hope this helps, Ted. E-Mail: (Ted Harding) [EMAIL PROTECTED] Fax-to-email: +44 (0)870 167 1972 Date: 25-Jul-01 Time: 23:48:36 -- XFMail --
Static routing
Hello, list! I was wandering is there any place to write down static routing table. Something like config file (similar to redhats /etc/sysconfig/static-routes) ? -- Just GNU it.
Re: Getting a 'woody' distribution
on Wed, Jul 25, 2001 at 03:25:56PM -0500, Jonathan Daugherty ([EMAIL
PROTECTED]) wrote:
You mean this:
Change your /etc/apt/sources.list file to read:
start
deb http://http.us.debian.org/debian testing main contrib non-free
deb-src http://http.us.debian.org/debian testing main contrib non-free
deb http://non-us.debian.org/debian-non-US testing/non-US main contrib
non-free
end
Yes, my bad. If the difference isn't clear, that's testing rather
than stable in the sources lines.
--
Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/
What part of Gestalt don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
Are these opinions my employer's? Hah! I don't believe them myself!
pgpBZHxLdsjId.pgp
Description: PGP signature
Re: A good c++ mailing list
On Wed, Jul 25, 2001 at 10:41:12PM -0400, dman wrote: On Wed, Jul 25, 2001 at 10:24:27PM -0400, dude wrote: | | Does anyone know of a good c++ mailing list (for beginners,) C++ and beginner don't belong in the same sentence :-). (Read: C++ is big, complex and makes you deal with low-level details like memory management and other stuff) I recommend Python as a powerful, yet easy to learn and use language that is also well-suited for beginners. See www.python.org for more information and join the Tutor list for excellent entry-level help (tutor@python.org). HTH, -D dman is right, learn Python. It's great. And if you programmed previously, you'll pick it up in an afternoon. If you want to learn C++ I suggestEssential C++. But if you really want to learn C++, get The C++ Programming language by Bjarne Stroustrup. It's a tough read, but you can't go wrong with the creator of C++. -- Danie Roux *shuffle* Adore Unix
netscape 4.76 freezes
hi * i'm running debian gnu/linux 2.2, kernel 2.2.19 on a - dual pIII/667MHz - i82555 ether express pro/100 onboard lan controller - 128MB ram i have xf86 with icewm as window manager. i'm using netscape 4.76 browser. the machine is connectet to my masq-router running ipchains to reach the internet. now the problem: every now and then (i REALLY dont know at what specific actions) netscape freezes up my machine. i cannot do anything but switch off and let fsck do its magic. has anyone of you experienced this also? i have smp activated in the kernel, to use both of my processors. maybe thats a problem? i read several mailing list archives and the problem does seem to be known. only i havent found a solution yet. thanx in advance rob __ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with [EMAIL PROTECTED] http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
Re: A good c++ mailing list
droux wrote: dman is right, learn Python. It's great. And if you programmed previously, you'll pick it up in an afternoon. Isn't Perl an alternative? :P -- vivi la PERLa loca... :) question: do spanish support hackish verbalization, noun-ization, post-modern-ed, or so? - Original Message - From: Danie Roux [EMAIL PROTECTED]
Re: Off Topic: Mailing Agents?
on Wed, Jul 25, 2001 at 04:04:35PM -0400, Adam Bell ([EMAIL PROTECTED]) wrote: Okay, so can anyone tell me what popular (to Debian Users) MUA sends every single message as an attachment to an empty message? Assuming, as others have, that you're referring to GPG/PGP, and quite possibly my mail (in which case you'll have to have someone forward you a copy of this message), the short answer is: you're using a broken mailer. I've written a number of FAQs on topics which recur with annoying frequency, the GPG/PGP mail FAQ isn't complete, so I'm attaching a series of related draft documents that are going into it (a bit of insight into the mind of...um, somebody). Cheers. -- Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Are these opinions my employer's? Hah! I don't believe them myself! A Short Rant / FAQ on the Subject of Signed E-Mail and Public Key Infrastructure Karsten M. Self kmself@ix.netcom.com I use a combination of tools in my email to create messages which are cryptographically signed in such a way that it is readily possible for the recipient to gain a good level of assurance that the message: - Originates from me. - Hasn't been modified in any way en route. This is sometimes called a digital signature (a technical term, not to be confused with the recently passed US legislation on electronic signatures, regarding legal contractual powers associated with various, and largely very weak, methods of inserting corporate hands into your wallet). The system under which it operates is known as public key infrastructure, and is based on public key encryption. You're probably going to start hearing a whole lot about this over the next year or so. That's the long description. The short story is that there's a way for me to keep half a secret and spread the other half to the world in such a way that you can tell if a particular message came from my half of the secret. It's pretty cool. The other part: You're responsible for determining whether or not a communication that purports to come from me is in fact from me. And if I didn't sign it, it almost certainly didn't. If the message *is* signed, it's still your obligation to verify the signature itself. You're probably reading this because you either stumbled across it at my website, or I sent it to you in response to an email you sent me saying you can't read my mail. In the latter case, the short answer is that: - Your mailer is broken. - This is your problem, not mine. - File a bug report with your vendor. - I'm going to continue signing my mail, and if you don't change your end of things, you're going to continue having problems reading it. - No, this isn't a virus, a bomb, a bug, a worm, or any other executable code. - If your IT or MIS department is brain-dead enough to actually strip off these attachments before you get your mail, I'm going to laugh at you in public. Sorry, this ain't the sympathy department. There's a nice rant below about why this is such a pathetic action, though, you might enjoy reading it. The long answer is the rest of this document. There's an Internet standard, called a request for comments, or RFC, which covers MIME encoded encryption and signatures. This is RFC 2015 (more info below under Resources). While it is still a draft standard, it is widely supported on multiple platforms. There are some pieces of Internet mail plumbing which break the protocol -- multiple mail clients (email applications to you), as well as some server applications. LISTSERV and beromail are two I'm aware of -- but compatibility modes are frequently available for such software, and in many cases, support is planned in future upgrades. But that's another story. If you're interested in the gory technical details, read on. You should be able to save my email as a text file and open it in a simple editor (e.g.: Notepad or Write under Legacy MS Windows). You'll find that the message body content type of my messages is expressed as: Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable ...which should be handled properly as inline plain-text content. If your mailer doens't present the message body in this format, you should report a bug to the program maintainer or vendor. The signature is presented as: Content-Type: application/pgp-signature Content-Disposition: inline For an intelligent mailer, this should be interpreted, rather than presented, and used to validate the message content itself. Otherwise, the content can be presented or concealed, at the user's preference. You might ask why I insist on signing my mail. Fair question. Part of the reason
Re: Getting CPU model and speed without rebooting
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 A long time ago, in a galaxy far, far way, someone said... I want to get the CPU's model and speed without rebooting. /proc/cpuinfo (to me anyway) is useless. Unless someone knows how to convert: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) To a PIII/450? It say's PIII in the model name :) On most (all?) CPUs with MMX divide the BogoMIPS by 2 to get the approx. clock frequency. - -- - -- Phil Brutsche [EMAIL PROTECTED] GPG fingerprint: 9BF9 D84C 37D0 4FA7 1F2D 7E5E FD94 D264 50DE 1CFC GPG key id: 50DE1CFC GPG public key: http://tux.creighton.edu/~pbrutsch/gpg-public-key.asc -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Made with pgp4pine iD8DBQE7X9B2/ZTSZFDeHPwRAngRAJ9D8K2hi99caFCH4m9zS00Y5kH9aACfRP+F pc/AxB4kuMvPVEyfY6fH7n0= =/fdr -END PGP SIGNATURE-
Re: Unable to upgrade libc6 (solution)
on Wed, Jul 25, 2001 at 03:56:16PM -0700, Robin Rowe ([EMAIL PROTECTED]) wrote: - Original Message - From: J.F.Gratton [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Sunday, July 22, 2001 7:00 AM Subject: Unable to upgrade libc6, cannot find why Hi, I just tried to install Deb on a new PC, but I can't complete the install, somehow. Here's what happens. - I started the install with Deb 2.2r3's boot floppy (well actually the first cd) and then changed my /etc/apt/sources.list to point to an ftp server with unstable instead of stable. - It downloads the packages OK. Now the fun starts... One the first packages it tries to install is libc6_2.2.3-7_i386.deb, to replace the one from the CD (which is 2.1.3-18). Here's what I get: --- Preparing to replace libc6 2.1.3-18 (using .../libc6_2.2.3-7_i386.deb) ... cp: invalid option -- L Try 'cp --help' for more information. dpkg: error processing /var/cache/apt/archives/libc6_2.2.3-7_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 --- Sorry if this seems long, I thought that putting the whole message might help people. I went throught the /var/lib/dpkg/info/libc6.* to find any mentions of cp -L without finding anything. My system is now stuck half-installed as I cannot continue (libc6 being important as it is for other packages). Anyone knows where to go from there ? Thanks Upgrade to 'testing' first, then 'unstable'. You can't make it directly from potato to unstable. (The testing version has the cp version with -L, but potato cp does not.) Below is the procedure that worked for me when I got hung up by the same problem. Hmm...if this is true, there is a bug, and the current 'unstable' package's installation procedure for libc6_2 needs to be fixed so that it doesn't rely on the '-L' flag, or other issues identified and fixed. At some point, the process will be to upgrade from potato to unstable directly. I'm also not sure that the '-L' flag doesn't exist in earlier versions of ls -- I have it on both my 'testing' and 'unstable' systems. Data, anyone? -- Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Are these opinions my employer's? Hah! I don't believe them myself! pgpM0S1Xf0IfI.pgp Description: PGP signature
Re: A good c++ mailing list
On Thu, Jul 26, 2001 at 03:46:21PM +0800, Lamer wrote: droux wrote: dman is right, learn Python. It's great. And if you programmed previously, you'll pick it up in an afternoon. Isn't Perl an alternative? :P I don't know how to respond to that, except to suggest the middleground: Ruby. When Ruby hits the bigtime, that will be my scripting language :-) www.ruby-lang.org apt-get install rubybook -- Danie Roux *shuffle* Adore Unix
Promise IDE ATA-100 controller on ASUS A7V133
Hi,I have an ASUS A7V133 with PDC20265 on-board IDE as well as the standardon-board VIA controller. I am trying to install Debian potato 2.2r3. Ineed to get it to install from the on-board Promise IDE controller. I triedusing the boot: parameter with these parameters, which I retrieved fromWindows 98 device manager resources:boot: linux ide2=0xA000, 0x9802 ide3=0x9400, 0x9002but this didn't work. When it reached the first few screens in the Debianinstalled it said that I didn't have any valid devices to install to.I went to a shell and looked at /proc/pci. I looked fine as far as I know.It showed an "unknown mass storage device" and said "unknown promisedevice". It also had the same addresses which I gave above as the bootparameter.Is there anything else I need to do? I usedhttp://www.geocities.com/ender7007/ as a guide. But I need more help. Doesanyone know what I can do?Thanks,David Grant Please cc: to [EMAIL PROTECTED] as I am not subscribed to list. Thanks a lot.
Re: Static routing
on Thu, Jul 26, 2001 at 10:21:24AM +0300, Denis J. Cirulis ([EMAIL PROTECTED]) wrote: Hello, list! I was wandering is there any place to write down static routing table. Something like config file (similar to redhats /etc/sysconfig/static-routes) ? What's in static-routes? Have you looked at /etc/network/interfaces? man (5) interfaces. -- Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Are these opinions my employer's? Hah! I don't believe them myself! pgp82PY0pZ7y5.pgp Description: PGP signature
Re: netscape 4.76 freezes
on Thu, Jul 26, 2001 at 03:43:45AM -0400, [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: hi * i'm running debian gnu/linux 2.2, kernel 2.2.19 on a ^ You'll find shift keys conveniently located at the far left and right of your keyboard. Use them. - dual pIII/667MHz - i82555 ether express pro/100 onboard lan controller - 128MB ram i have xf86 with icewm as window manager. i'm using netscape 4.76 browser. the machine is connectet to my masq-router running ipchains to reach the internet. now the problem: every now and then (i REALLY dont know at what specific actions) netscape freezes up my machine. Hmm...Freezes your machine? Odd. My first advice is to find a different browser. Netscape simply sucks, and has for years. There's been some mild improvement of late, but it's far past time to bury the beast. Try Galeon, Konqueror, or Mozilla, or take a look at other recommendations at http://kmself.home.netcom.com/Linux/FAQs/browsers.html i cannot do anything but switch off and let fsck do its magic. Why don't you describe what else you've tried, e.g.: - Window-manager actions on the window. - ctrlaltFn, where 'Fn' is one of the function keys 1-6, to switch to another virtual terminal. - ctrlaltbackspace, to shut down X. - Magic-Alt-Sysrq kernel signals. - Remotely access your system from another box, via network. - Access your box via serial console (a Palm Pilot will do in a pinch, with appropriate terminal emulo software). It might also be helpful for you to specify: - Your video card. - Your window manager. - Any appropriate log messages from: /var/log/XFree86.n.log /var/log/messages /var/log/syslog ...other X output. has anyone of you experienced this also? Hard lockups due to apps are rare. Lockups due to video/X problems are not uncommon. It's also possible that there are other problems you're overlooking, which may become apparent by more careful perusal of system logs (they're there for a reason). -- Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Are these opinions my employer's? Hah! I don't believe them myself! pgpwxqg7pHGpp.pgp Description: PGP signature
Re: A good c++ mailing list
| On Thu, Jul 26, 2001 at 03:46:21PM +0800, Lamer wrote: | droux wrote: | dman is right, learn Python. It's great. And if you programmed previously, | you'll pick it up in an afternoon. | | Isn't Perl an alternative? :P | | I don't know how to respond to that, except to suggest the middleground: Ruby. | When Ruby hits the bigtime, that will be my scripting language :-) I agree that Python, Perl, Ruby et all are all fine and dandy languages. But I don't think that is what the original poster of the question asked (see the subject line). There are many good pointers to sites and books to learn or perfect your C++ skills. I don't know of any mailing list for beginning C++ users, but I would recommend following these news groups: comp.lang.c++.moderated and comp.std.c++. Some of the posts might be difficult for beginning C++ users, but hey: live and learn ! Posting your question in those newsgroups again maybe gives you more accurate pointers. Take time to learn C++ well, and you sure will never regret it! --manu.
Disk change detected on device
Hello, I am getting this message from time to time on my server: kernel: VFS: Disk change detected on device ide1(22,0) kernel: VFS: Disk change detected on device fd(2,0) But i am sure that there are no disks neither inside the floppy nor inside the cdrom. No one is working locally on this machine. Also i get a modprobe: can't locate module block-major-3-message in my logs. I have no idea why this messages appear. About the system: -Pentium II 266 MHz -64 MB RAM -Intel 82557 Network adapter -Compaq Netflex 3 network adapter -3Com 3C905B 100bTx network adapter -Adaptec AIC7881-U -SCSI-Disk -Matrox Millenium graphics adapter -MATSHITA CR-583 CD-ROM Has anyone an idea, whats wrong here? The system runs very well, but these messages seems a bit strange to me because i am sure, no one is using the floppy and/or the cdrom. Thanks a lot! Regards, Matthias -- GMXler aufgepasst - jetzt viele 11 New WebHosting Pakete ohne Einrichtungsgebuehr + 1 Monat Grundgebuehrbefreiung! http://puretec.de/index.html?ac=OM.PU.PU003K00717T0492a
balsa: orphaned?
what's up with balsa? there's a huge number of old bugs (year or two old) including the ne that makes it uninstallable (+2 month days): Grave functionality bugs - outstanding (A list of all such bugs used to be available). #98110: balsa: depends on libltdl0, which has been removed Package: balsa; Severity: grave; Reported by: Colin Watson [EMAIL PROTECTED]; 66 days old. anybody knows what's going on? (I am looking for a MUA that supports IMAP (and SSL)) TIA erik
Unidentified subject!
Ok, freeze means that the machine don't react to ANYTHING, not even to: - Ctrl-Alt-Fn - Ctrl-Alt-Backspace - login via telnet or serial line - Ctrl-Alt-Del Even a active telnet session from another host to that machine freezes so i have to kill it on that host. I didn't say freeze for no reason. Simply turning off a Linux box is something even I consider the last of all possible solutions! The logfiles dont give me hints either, at least the 'popular' ones 'syslog' and 'messages' (which are especially hard to view on a frozen machine so i redirected them to another host). My video card is a noname but it has a S3-Virge on it (dont know the name of the controller right now) and 2MB of ram. I know that that's not much, but I dont have the money for a 32MB card right now. I guess I mentioned that I use icewm for my window-manager? Unfortunatelly, I've also tried another browser, namely Opera5.0. It also freezes (surprise surprise) in the same way that Netscape4.76 does. Ah yeah, Lynx works. Hope that helps rob __ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with [EMAIL PROTECTED] http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
netscape freeze, additional info
Ok, freeze means that the machine don't react to ANYTHING, not even to: - Ctrl-Alt-Fn - Ctrl-Alt-Backspace - login via telnet or serial line - Ctrl-Alt-Del Even a active telnet session from another host to that machine freezes so i have to kill it on that host. I didn't say freeze for no reason. Simply turning off a Linux box is something even I consider the last of all possible solutions! The logfiles dont give me hints either, at least the 'popular' ones 'syslog' and 'messages' (which are especially hard to view on a frozen machine so i redirected them to another host). My video card is a noname but it has a S3-Virge on it (dont know the name of the controller right now) and 2MB of ram. I know that that's not much, but I dont have the money for a 32MB card right now. I guess I mentioned that I use icewm for my window-manager? Unfortunatelly, I've also tried another browser, namely Opera5.0. It also freezes (surprise surprise) in the same way that Netscape4.76 does. Ah yeah, Lynx works. Hope that helps rob __ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with [EMAIL PROTECTED] http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
Re: CD-RW Question...
On Wed, 25 Jul 2001 17:12:57 -0400 Aaron Traas [EMAIL PROTECTED] wrote: I have a question... Could someone please recommend a reliable IDE/ATAPI CD-RW that works out-of-the-box with Debian? Like, something I could just plug in and start burning. Also, I'd like one that isn't too picky about different brands of media. The Ricoh in my Win98 box isn't that reliable, and doesn't like Memorex and other common brands of CD-R blanks. Any advice would be appreciated. Thanks in advance. I had a Philips CDRW800 and found that it would only burn a CD one time in around 8. Most annoying. I kept getting error messages to do with power calibration. I sold this drive and decided to go with a genuine SCSI CDRW - a suitable SCSI card costs very little, I have the Iwill SIDE-2930C which is fully supported by Linux. I bought a Yamaha 2100S, a 16x10x40 SCSI drive. I know you asked about IDE drives, but SCSI is certainly worth thinking about - you will find it altogether more reliable. I have a scanner and the CDRW plugged into my SCSI card. Initially, I found that I could only burn one CD, then all I got with subsequent burns was a loud, continuous static-like noise, unless I rebooted. I discovered that the drive didn't like cdrecord under Linux, but preferred cdrdao. Using cdrdao I now have a 100% reliable CDRW which writes to absolutely *anything*! I have tried the cheapest CDR disks I could find and still get good results. I use Gtoaster as the GUI front-end to cdrdao and grip as a ripper to ensure that when I record an audio CD I get a perfect copy. -- Phillip Deackes Using Progeny Debian Linux
PCTel Modem vs. Debian 2.2r3
Hello users (and hopefully developers) of Debian, For the last couple of weeks I've been unsuccessfully trying to connect to the Internet on my Debian 2.2r3 (potato) distribution, running kernel 2.2.19pre17, using a PCTel modem. For those who don't have the time to read big messages, I'll go straight to the point: 1) If anyone managed to connect a PCTel HSP56 PCI Micromodem to the Internet on a Debian GNU/Linux 2.2r3, please write a mini-HOWTO. I'm not the only one struggling with this. 2) Developers: I think what happens is that pppd sets off a kernel bug when trying to connect to an ISP (I was told that from /var/log/messages analysis). I don't know if it's the kernel's fault, or if it's PCTel module's fault (it is a 2.2.18 precompiled module), but I thought I should say this so you guys would decide if it's something worth taking a deeper look. Sending this message is my last act of hope. I'm already considering buying a real modem, something I should have done since the very beginning. Things I've already tried: - PCTel's module (link available from Rob Clark's site and Linmodems.org) - Jan Stifter's module (http://www.medres.ch/~jstifter/linux/pctel.html) - Configuring with pppconfig and calling pon/poff. - Installing ppp and wvdial package and using wvdial. - Sean Walbran Marvin Stodolsky's Linmodem-HOWTO - Searching the web (found many mailing list archives about this) - etc (don't remember right now)... I read that PCTel used to work on Debian 2.1, but doesn't on 2.2. Some user updated his Debian distro and pppd started crashing. If anyone knows *exactly* what to do, or want to exchange ideas, please email me. Thanks, __ Vítor Estêvão Silva Souza [EMAIL PROTECTED]
Re: lilo stuff -- [ soundblaster sb 16 ]
hi the lilo and the old lilofile (which worked pretty good) are attachements now. maybe i forgetz an important scsi thing to set on in the kernel? or maybe it was the wrong scsi driver, i dont know. NCR 53c875 (rev 38) is my scsi chip on a pci card. thank you for helping markus hi ya markus... easiest way to get around the lilo problem... - boot your server with a different media ( floppy or cdrom ) - make a boot floppy # dd if=/vmlinuz of=/dev/fd0 bs=1024 ) # rdev /dev/fd0 /dev/sda1 ( if your /vmlinuz is on /dev/sda1 ) if it boots...good - probably wont work...since you're booting off sda1 ( you might need to get initrd on it too ) - make sure your kernel ( /vmlinuz) supports your scsi disk ( you'll get kernel panic if it cant find / on your system ( in which case you're 1/2 way there - otherwise... dig into your large-disk howto - see if the BIOS recognizes your disk on bios boot - see if you have to set the large disk jumper for your hardisk - probably need a jumper on your disk - what is the rest of your lilo.conf file??? - do you have initrd=... ??? ( you need it for booting from sda1 ) - do you have lba32 ??? - do you have linear ?? - add each option and rerun lilo and see if it helps booting innie...meanie...my knee moe pick one and start playing... have fun alvin On Thu, 26 Jul 2001, Markus Hansen wrote: Hi i tried to use a manual configured kernel, but when i tried to start it lilo wasnt working it just said LI LI LI etc... so my problem is to write a right lilo, right? now i am booting with disk and this is slow but anyway, i dont know what i have to do, lilo already say things line image=/vmlinuz label=linux read-only so what is wrong with the lilo, i guess it is a difficult question, because i havent written what i applied to in the kernel and what not. i send the data with me as attatchement thank you for helping me. ps i am booting from a scsi device called sda1 markus #image=/boot/zImage-2.2.17 # label=Linux # read-only # append=hdc=ide-scsi # options ide-cd ignore=hdc # alias scd0 sr_mod # pre-install sg modprobe ide-scsi # pre-install sr_mod modprobe ide-scsi # pre-install ide-scsi modprobe ide-cd # cd /dev rm cdrom ln -s scd0 cdrom # /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'. # +---+ # |!! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt', or install a new kernel. The | # | computer will most likely fail to boot if a kernel-image | # | post-install script or you don't remember to run `lilo'. | # | | # +---+ # Support LBA for large hard disks. # lba32 # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/sda # Specifies the device that should be mounted as root. (`/') # root=/dev/sda1 # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Installs the specified file as the new boot sector # install=/boot/boot.b # Specifies the location of the map file # map=/boot/map # You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000 # Specifies
Re: Getting CPU model and speed without rebooting
On Thu, Jul 26, 2001 at 08:20:13AM +0200, Danie Roux wrote: I want to get the CPU's model and speed without rebooting. /proc/cpuinfo (to me anyway) is useless. Unless someone knows how to convert: vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) To a PIII/450? -- Danie Roux *shuffle* Adore Unix Thanks you all, lack of thinking on my part. I'm in a lab, and I assumed the PC next to me (PIII 450) would be the same as the one I'm one. And that's why cpu MHz : 551.264 Didn't look right. Turns out there IS a good reason to reboot Linux now and again. Now I can finish my asset reporting bootdisk. -- Danie Roux *shuffle* Adore Unix
Re: soundblaster sb 16
On Thu, 26 Jul 2001, Markus Hansen [EMAIL PROTECTED] wrote: Hi i tried to use a manual configured kernel, but when i tried to start it lilo wasnt working it just said LI LI LI Did you actually run lilo? I mean, did you type lilo after you installed the new kernel and before rebooting? -- Philipp Lehman [EMAIL PROTECTED]
RE: Getting CPU model and speed without rebooting
On Thu, 26 Jul 2001, Ian Perry [EMAIL PROTECTED] wrote: None of my machines give MHz... only bogomips Next Question What is a bogomip ??? See the BogoMips mini HOWTO (someone actually wrote a BogoMips HOWTO, isn't that great...) -- Philipp Lehman [EMAIL PROTECTED]
Re: netscape 4.76 freezes
On Thu, Jul 26, 2001 at 03:43:45AM -0400, [EMAIL PROTECTED] wrote: every now and then (i REALLY dont know at what specific actions) netscape freezes up my machine. i cannot do anything but switch off and let fsck do its magic. has anyone of you experienced this also? i have smp activated in the kernel, to use both of my processors. maybe thats a problem? i read several mailing list archives and the problem does seem to be known. only i havent found a solution yet. Have you tried setting resource limits, so that netscape cannot make your machine run out of memory? man ulimit(1) and setrlimit(2). Cheers, Joost
Re: C programming: Segmentation fault within malloc?
Have you tried to look at the value sizeof(struct node)? It might be too big.
Otherwise, can you show us the backtrace in gdb.
gdb says sizeof(struct node) == 20. It is mostly a couple of pointers:
struct node {
enum colors color;
struct node *left, *right, *parent;
void *data;
};
Breakpoint 1, insert_symbol (sym=0xbfffe25c) at symbols.c:197
197 if (!((node = (struct node *)malloc(sizeof(struct node)))
(gdb) p sizeof(struct node)
$1 = 20
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0x400af19e in malloc () from /lib/libc.so.6
(gdb) bt
#0 0x400af19e in malloc () from /lib/libc.so.6
#1 0x400ae844 in malloc () from /lib/libc.so.6
#2 0x804c60a in insert_symbol (sym=0xbfffe25c) at symbols.c:197
#3 0x8048c6f in tmp_variable (tmp=0xbfffe398, sym_data=0xbfffe2ec)
at actions.c:115
#4 0x80497be in sym_for_const (tok=0xbfffe4f8, sym=0xbfffe398)
at actions.c:412
#5 0x804d55f in yyparse () at parser.y:216
#6 0x804ddd5 in translator (params=0xbb80) at parser.y:272
#7 0x804b08f in main (argc=1, argv=0xbc98) at main.c:195
#8 0x4005b2db in __libc_start_main () from /lib/libc.so.6
(gdb)
I believe that malloc is called twice here due to line 198:
if (!((node = (struct node *)malloc(sizeof(struct node)))
(node-data = malloc(sizeof(struct symbol) {
and sizeof(struct symbol) is 52.
On [Thu, 26 Jul 2001 03:15:46 +0300], Shaul Karl [EMAIL PROTECTED] wrote:
Breakpoint 2, insert_symbol (sym=0xbfffe25c) at symbols.c:197
197 if (!((node = (struct node *)malloc(sizeof(struct node)))
(gdb) l 197
192
193 enum flag insert_symbol(struct symbol *sym)
194 {
195 struct node *node;
196
197 if (!((node = (struct node *)malloc(sizeof(struct node)))
198 (node-data = (struct symbol *)malloc(sizeof(struct
symbol) {
199 fprintf(stderr, sym_tab_msg[MEMORY_ALLOCATION_FAILURE]);
200 return FALSE;
201 }
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x400af19e in malloc () from /lib/libc.so.6
(gdb)
How can it be? If malloc can not allocate memory it should return a NULL
pointer. How can it Seg fault?
[03:09:45 16]$ free
total used free sharedbuffers cached
Mem: 63584 60936 2648 31452 1344 20472
-/+ buffers/cache: 39120 24464
Swap: 116924 52580 64344
[03:09:49 16]$
Since all the memory is used and the machine is running for some time now,
doesn't that precludes hardware problems?
Obviously I am missing something.
--
Shaul Karl [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
Shao Zhang Tel: (02) 9209 4838
Software Engineer Fax: (02) 9209 4992
Redfern Broadband Networks (RBN)Mail: [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
Shaul Karl [EMAIL PROTECTED]
