Re: hping3 avec iptables
Bonjour, merci pour votre réponse ! je comprends mieux. Je ne connais pas encore très bien hping, je trouve ça un peu étrange comme comportement. Je vais étudier le man page. Par contre ce que je ne saisis pas c'est pourquoi iptables, malgré ma règle : -A OUTPUT -s 192.16.0.1/32 -j LOGACCEPT il applique la règle -A OUTPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j LOGDROP Es-ce que c'est le fait que cette dernière soit avant la règle LOGACCEPT ? D'avance merci, 2010/7/23 Cornichon cornicho...@gmail.com Le 23 juillet 2010 18:15, Pascal Hambourg pascal.m...@plouf.fr.eu.org a écrit : Hugo Deprez a écrit : merci pour la réponse, j'ai une règle de type ACCEPT source any destination any. Elle semble fonctionnelle, et je pensais qu'elle prendrait le dessus sur les autres règles déjà présentes. Ce ne serait pas le cas ? voici ma table OUTPUT : Note : je trouve que le format de sortie d'iptables -L n'est pas très lisible, je préfère celui d'iptables-save. LOGDROPtcp -- anywhere anywheretcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,PSH,ACK,URG LOGDROPtcp -- anywhere anywheretcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,ACK,URG Note : ces deux règles pourraient être fusionnées en flags:FIN,SYN,RST,ACK,URG/FIN,SYN,RST,ACK,URG LOGDROPtcp -- anywhere anywheretcp flags:FIN,SYN,RST,PSH,ACK,URG/NONE C'est cette règle qui attrape le paquet TCP sans flag émis par hping3. Il n'est donc pas bloqué sur son état de suivi de connexion comme je l'avais d'abord pensé mais sur la valeur de ses flags TCP. Effectivement. Si tu ne veux pas t'émbêter, il peut être judicieux de n'effectuer ce genre de filtrage qu'en entrée. Mais en cas de scan nmap par exemple, tu auras des retours dropés. Accessoirement, quel est le but d'envoyer un paquet TCP sans flag, qui sera forcément écarté par le destinataire ? Ne faudrait-il pas fournir à hping3 les options pour émettre un paquet valide ? Windows répond parfois à ce genre de paquets. Pour ce qui est des paquets invalides, voici un exemple: iptables -t filter -A INPUT -m state --state INVALID -j DROP
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Le Sun, 25 Jul 2010 23:20:02 +0200, Yves Rutschle a écrit : Uniquement si on n'a pas de pare-feu devant la machine qui fait tourner X, non? (i.e. il faut que le port 5900+ soit accessible depuis l'Internet?) cela veut-il dire que ssh -X ne crée pas un tunnel à la différence de ssh -Y ? (-X nécessite les ports X11 6000 en plus et -Y est un tunnel donc 22 suffit ?) (ma lanterne est un peu éteinte dans le domaine ...) des lumières ou une URL seraient bienvenues... -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d3dba$0$23169$426a3...@news.free.fr
Re: Redirection X via ssh et Debian
On 15:41 Sun 25 Jul , Mourad Jaber wrote: Bonjour, J'ai un soucis avec laredirection X sous debian... quand je fait un ssh -X machinecible où la machine cible est une machine debian, j'ai une erreur dès que j'essai de lancer une application X, il manque la variable DISPLAY ! Par contre avec une machine cible ubuntu, pas de problème et j'ai effectivement la variable DISPLAY qui possède une valeur ! Comment résoudre ce problème sous debian ? J'avais deja eu ce genre de soucis.. De mémoire, je faisais: machine locale: * Enlever l'option no listen TCP du serveur X /etc/X11/xinit/xserverrc * Lancer X a la main avec startx et non via KDM/GDM car il écrase sinon cette valeur machine distante: * Lancer export DISPLAY=machine:0.0 (si 0.0 est le display de la machine) Avec quelque chose comme ca, tu devrais t'en sortir... Amicalement, -- Xavier Oswald xosw...@debian.org GNU/Linux Debian Developer - http://www.debian.org/ GPG key IDs: 0x88BBB51E, 0x464B8DE3 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726083609.ga24...@master
Re: realplayer (format rm)
Salut, Le 24/07/2010 19:39, Cyrille a écrit : J'aimerais visionner une video au format rm Par défaut, le lecteur video (TOTEM) ne me la lit pas (le codec est manquant selon lui et sa recherche automatique n'aboutit pas) J'ai essayé aussi le site officiel, mais il ne propose qu'une verison i686 (et je suis en 64 bit) Que me conseillez vous ? quand il s'agit de lire des medias avec un codec dont la licence n'est pas libre, sous débian, ça veut quasi toujours dire qu'il faut faire appel à Marillat :) : http://debian-multimedia.org/ Et là, normalement, il y a de quoi lire tous les truc les plus exotique ou presque. Par contre, faut trouver les bon paquet. Mais l'aide, et google devrait t'aider. (PS j'ai bien mplayer d'installé, il aurait dû me filer ce codec non ? source : http://packages.debian.org/lenny/mplayer ) Je crois que la version de mplayer compilé pour debian normal est dépourvue de la gestion des codec ayant un licence non Debian compatible La version Marillat est plus complète, mais utile illégalement des codec au vue de certaine législation (pas le cas de la France) ! -- Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d4ecc.4090...@remiremont.fr
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Salut, Le 26/07/2010 09:48, moi-meme a écrit : Le Sun, 25 Jul 2010 23:20:02 +0200, Yves Rutschle a écrit : Uniquement si on n'a pas de pare-feu devant la machine qui fait tourner X, non? (i.e. il faut que le port 5900+ soit accessible depuis l'Internet?) cela veut-il dire que ssh -X ne crée pas un tunnel à la différence de ssh -Y ? Ben si. Mais ça n'a rien a voir avec ce qui est actif sur le serveur. Si tu fais xhost + tu autorise toute personne qui peut initier un session TCP sur le bon port de la machine, à accéder au serveur X ! Après, si on limite l'écoute sur 127.0.0.1 alors ça restreint un peu aux connexion local et ssh ; si tu as un firewall devant, ça va également limiter, mais ça n'en est pas pour autant sécurisé, je donne jamais très cher de la sécurité des réseaux ou l'admin se préoccupe peu des ports actif sur les machines en se disant j'ai un FW ;) (-X nécessite les ports X11 6000 en plus et -Y est un tunnel donc 22 suffit ?) Pour ssh je ne crois pas que -Y puisse marcher sans -X ? Par contre, -X est une option implicite dans la conf de beaucoup de client openSSH (désactivable avec ssh -x) Cela dit, j'ai jamais très bien compris comment marche xauth :( -- Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d52f5.1050...@remiremont.fr
Re: realplayer (format rm)
La version Marillat est plus complète, mais utile illégalement des codec au vue de certaine législation (pas le cas de la France) ! OK je vais tester ce dépôt (Jusqu'alors j'utilisais ce dépôt http://mirror.home-dn.net/debian-multimedia ) Je verrais bien si c'est mieux ou non ! Merci bien ! Cyrille -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726113215.76123ebf.cyri...@cbiot.fr
Re: Redirection X via ssh et Debian [résolu... en f ait non :(]
2010/7/26 Julien Demange julien.dema...@remiremont.fr Salut, Le 26/07/2010 09:48, moi-meme a écrit : Le Sun, 25 Jul 2010 23:20:02 +0200, Yves Rutschle a écrit : Uniquement si on n'a pas de pare-feu devant la machine qui fait tourner X, non? (i.e. il faut que le port 5900+ soit accessible depuis l'Internet?) cela veut-il dire que ssh -X ne crée pas un tunnel à la différence de ssh -Y ? Ben si. Mais ça n'a rien a voir avec ce qui est actif sur le serveur. Si tu fais xhost + tu autorise toute personne qui peut initier un session TCP sur le bon port de la machine, à accéder au serveur X ! Après, si on limite l'écoute sur 127.0.0.1 alors ça restreint un peu aux connexion local et ssh ; si tu as un firewall devant, ça va également limiter, mais ça n'en est pas pour autant sécurisé, je donne jamais très cher de la sécurité des réseaux ou l'admin se préoccupe peu des ports actif sur les machines en se disant j'ai un FW ;) (-X nécessite les ports X11 6000 en plus et -Y est un tunnel donc 22 suffit ?) Pour ssh je ne crois pas que -Y puisse marcher sans -X ? Par contre, -X est une option implicite dans la conf de beaucoup de client openSSH (désactivable avec ssh -x) Cela dit, j'ai jamais très bien compris comment marche xauth :( -- Julien Salut, Si je peux apporter mon grain de sel, les deux options créent un tunnel SSH qui fait que le serveur X de ta machine locale (celle qui lance ssh) est accessible sur ta machine distante (qui fait tourner sshd) via :10.0 ou un truc dans le genre. Sauf que -Y authentifie la connexion au serveur X via le système xauth dont je ne comprends pas grand chose (il n'y a pas une histoire de cookie dans le tas ?), alors que -X se connecte simplement en TCP sans chercher à s'authentifier auprès de X. xhost + (qui doit être lancé par l'utilisateur qui possède l'instance du serveur X, soit en général l'utilisateur courant) ne devrait en effet ne jamais être utilisé si on peut faire autrement. En tout cas, un simple ssh -Y lo...@mon.serveur devrait passer. Par contre, si tu lance ton ssh dans une console où tu as fait un su avant, il ya des chances que la variable d'environnement DISPLAY ne soit pas disponible (et donc non-communicable à SSH). Dans ce cas-là, essaie : $ DISPLAY=:0.0 ssh -y lo...@mon.serveur Cordialement, Simon
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Le Mon, 26 Jul 2010 11:20:02 +0200, Julien Demange a écrit : Si tu fais xhost + tu autorise toute personne qui peut initier un session TCP sur le bon port de la machine, à accéder au serveur X ! question : un nmap du client: --[...@morgane ~] nmap 192.168.10.150 Starting Nmap 4.62 ( http://nmap.org ) at 2010-07-26 12:02 CEST Interesting ports on 192.168.10.150: Not shown: 1712 closed ports PORTSTATE SERVICE 22/tcp open ssh 37/tcp open time 113/tcp open auth Nmap done: 1 IP address (1 host up) scanned in 0.730 seconds Le xhost + n'ouvre pas de port supplémentaire (dixit nmap) et avant je n'ai pas possibilité d'ouvrir de fenêtre X. Je ne le vois pas ouvert ce port X11. Plutôt que de continuer à polluer, vous n'avez pas une petite URL pour neuneu comme moi que je meure (?) moins idiot ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d5de8$0$23918$426a7...@news.free.fr
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Le 26/07/2010 12:05, moi-meme a écrit : Le Mon, 26 Jul 2010 11:20:02 +0200, Julien Demange a écrit : Si tu fais xhost + tu autorise toute personne qui peut initier un session TCP sur le bon port de la machine, à accéder au serveur X ! question : un nmap du client: --[...@morgane ~] nmap 192.168.10.150 Starting Nmap 4.62 ( http://nmap.org ) at 2010-07-26 12:02 CEST Interesting ports on 192.168.10.150: Not shown: 1712 closed ports man nmap : By default, Nmap scans the most common 1,000 ports for each protocol. Si tu veux scanner tout les ports TCP tu devrais utiliser la syntaxe : nmap -sT -p 1-65535 192.168.10.150 -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | ===Debian=GNU/Linux=== -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d64f0.3020...@juliana-multimedia.com
Re: Redirection X via ssh et Debian
On 2010-07-26 10:36:09 +0200, Xavier Oswald wrote: De mémoire, je faisais: machine locale: * Enlever l'option no listen TCP du serveur X /etc/X11/xinit/xserverrc Pas besoin. Le problème est forcément ailleurs. * Lancer X a la main avec startx et non via KDM/GDM car il écrase sinon cette valeur Donc pas besoin. machine distante: * Lancer export DISPLAY=machine:0.0 (si 0.0 est le display de la machine) Non, la connexion *doit* se faire sur localhost. Un export DISPLAY=machine:0.0 *ne peut pas* marcher. Ou alors tu as un énorme trou de sécurité sur ta machine. -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726103403.ga3...@prunille.vinc17.org
Re: Redirection X via ssh e t Debian [résolu... en fait non :(]
On 2010-07-26 11:18:45 +0200, Julien Demange wrote: Pour ssh je ne crois pas que -Y puisse marcher sans -X ? Si, en fait, -Y s'utilise à la place de -X. -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726104125.gb3...@prunille.vinc17.org
Re: Redirection X via ssh e t Debian [résolu... en fait non :(]
On 2010-07-26 11:46:17 +0200, Simon Chopin wrote: Si je peux apporter mon grain de sel, les deux options créent un tunnel SSH qui fait que le serveur X de ta machine locale (celle qui lance ssh) est accessible sur ta machine distante (qui fait tourner sshd) via :10.0 ou un truc dans le genre. Sauf que -Y authentifie la connexion au serveur X via le système xauth dont je ne comprends pas grand chose (il n'y a pas une histoire de cookie dans le tas ?), alors que -X se connecte simplement en TCP sans chercher à s'authentifier auprès de X. xhost + (qui doit être lancé par l'utilisateur qui possède l'instance du serveur X, soit en général l'utilisateur courant) ne devrait en effet ne jamais être utilisé si on peut faire autrement. xauth est aussi utilisé avec -X. En fait, -X ou -Y, c'est juste une question de restriction sur ce qu'un client X11 peut faire. D'après http://dailypackage.fedorabook.com/index.php?/archives/48-Wednesday-Why-Trusted-and-Untrusted-X11-Forwarding-with-SSH.html avec -Y, un client peut injecter des événements (déplacement de la souris, touches enfoncées) ou lire des données des fenêtres des applications locales (e.g. pour screenshot), avec qu'avec -X seulement, le serveur X l'interdit. Je suppose que le but est de pouvoir faire tourner des applications (avec affichage local) sur une machine distante, dont on n'a pas entièrement confiance, par exemple une machine qui appartient à une entreprise tierce: on ne voudrait pas que cette application distante puisse voler des données locales ou perturber la machine locale. Donc attention, ne pas faire de ssh -Y vers n'importe quelle machine! -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726105640.gc3...@prunille.vinc17.org
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Salut, Le 26/07/2010 12:05, moi-meme a écrit : Le Mon, 26 Jul 2010 11:20:02 +0200, Julien Demange a écrit : Si tu fais xhost + tu autorise toute personne qui peut initier un session TCP sur le bon port de la machine, à accéder au serveur X ! question : [nmap] Nmap done: 1 IP address (1 host up) scanned in 0.730 seconds Le xhost + n'ouvre pas de port supplémentaire (dixit nmap) Bien sur que non ! C'est le serveur X qui va ouvrir des ports, à son lancement. Dans les version récente des distribution, X ouvre rarement autre chose que sur 127.0.0.1 ou une socket unix. Mais on peut lui dire d'écouter n'importe quel IP de la machine, même si ça n'a plus beaucoup d'intérêt avec SSH. xhost lui va dire qu'elle hôte distant va ne pas êtres jeté des sa connexion. A l'instant des directive host alow/deny dans apache ou tout autre appli serveur qui filtre au niveau applicatif. Si tu fais un xhost + mais que je serveur X n'écoute pas sur l'IP de ta machine, ça ne sert à rien. Par contre, si X vien a écouter l'IP, alors là, il va autoriser potentiellement tout le monde... xauth lui travail avec des coockie, je n'en sais pas plus. pour nmap teste : # nmap -sS -p6000-6100 127.0.0.1 # nmap -sS -p6000-6100 192.168.10.150 (ou -sT à la place de -sS si tu ne le lances pas en root) et avant je n'ai pas possibilité d'ouvrir de fenêtre X. Je ne le vois pas ouvert ce port X11. Ce que j'ai toujours compris : pour ton serveur X, à travers ssh, il va voit tout, comment venant du client ssh local. Donc c'est ton client ssh qui doit avoir le droit de parler à ton serveur X local ; pour le distant, le serveur SSH va se comporter un peu comme un serveur X local. Le tout est de passer les coockie entre tout ça. Ou bien ne pas avoir de cookie. Et là, je n'ai jamais réussi à faire autre chose que tu tatillon sans comprendre trop fort. Plutôt que de continuer à polluer, vous n'avez pas une petite URL pour neuneu comme moi que je meure (?) moins idiot ? Perso, je suis intéressé par tout doc clair sur xauth, Je n'ai jamais trouvé que des truc qui entre des des considération technique assez floue. :( -- a+, Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d6e44.2000...@remiremont.fr
Re: realplayer (format rm)
Cyrille, lundi 26 juillet 2010, 11:32:15 CEST […] (Jusqu'alors j'utilisais ce dépôt http://mirror.home-dn.net/debian-multimedia ) C’est un miroir officiel de debian-multimedia.org… D’ailleurs, utilisez des miroirs, ce sera sympa pour Christian Marillat (ou cliquez sur les pubs). -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726143748.55a1f...@ithil
Re: realplayer (format rm)
Le 26/07/2010 à 14:37:48, Sylvain Sauvage a écrit : Cyrille, lundi 26 juillet 2010, 11:32:15 CEST […] (Jusqu'alors j'utilisais ce dépôt http://mirror.home-dn.net/debian-multimedia ) C’est un miroir officiel de debian-multimedia.org… D’ailleurs, utilisez des miroirs, ce sera sympa pour Christian Marillat (ou cliquez sur les pubs). Quelles pubs ? (je n'en vois aucune) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726130613.ga30...@allken-bernard.org
Re: realplayer (format rm)
Pierre Allken-Bernard, lundi 26 juillet 2010, 15:06:13 CEST […] Quelles pubs ? (je n'en vois aucune) Premier texte de la page « I think you have noticed the Google Ads. I need that to pay the huge amount of bandwidth. » Quand tu vérifies s’il y a de la pub sur un site, désactive adblock cie… -- Sylvain Sauvage -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726152433.74d9d...@ithil
Re: realplayer (format rm)
Le 26/07/2010 à 15:24:33, Sylvain Sauvage a écrit : Pierre Allken-Bernard, lundi 26 juillet 2010, 15:06:13 CEST […] Quelles pubs ? (je n'en vois aucune) Premier texte de la page « I think you have noticed the Google Ads. I need that to pay the huge amount of bandwidth. » Quand tu vérifies s’il y a de la pub sur un site, désactive adblock cie… Ok (j'étais sur l'autre page...). -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20100726133006.ga30...@allken-bernard.org
Re: Redirection X via ssh et Debian [résolu... en fait non :(]
Le Mon, 26 Jul 2010 13:20:02 +0200, Julien Demange a écrit : pour nmap teste : # nmap -sS -p6000-6100 127.0.0.1 # nmap -sS -p6000-6100 192.168.10.150 (ou -sT à la place de -sS si tu ne le lances pas en root) le résultat des commandes -j'ai suivi le sorfdres : root[moi]# nmap -sS -p 1-65535 192.168.10.16 Starting Nmap 5.21 ( http://nmap.org ) at 2010-07-26 13:48 CEST Nmap scan report for morgane (192.168.10.16) Host is up (0.025s latency). Not shown: 65524 closed ports PORT STATE SERVICE 21/tcpopen ftp 22/tcpopen ssh 80/tcpopen http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 2049/tcp open nfs 6566/tcp open unknown 43629/tcp open unknown 45590/tcp open unknown 60646/tcp open unknown root[moi]# nmap -sT -p 1-65535 192.168.10.16 Starting Nmap 5.21 ( http://nmap.org ) at 2010-07-26 13:52 CEST Nmap scan report for morgane (192.168.10.16) Host is up (0.046s latency). Not shown: 65524 closed ports PORT STATE SERVICE 21/tcpopen ftp 22/tcpopen ssh 80/tcpopen http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 2049/tcp open nfs 6566/tcp open unknown 43629/tcp open unknown 45590/tcp open unknown 60646/tcp open unknown le port 60646 est du X11 ? j'ai une fenêtre graphique ouverte Plutôt que de continuer à polluer, vous n'avez pas une petite URL pour neuneu comme moi que je meure (?) moins idiot ? Perso, je suis intéressé par tout doc clair sur xauth, Je n'ai jamais trouvé que des truc qui entre des des considération technique assez floue. Tant pis. Mais on n'a pas toujours besoin de savoir finement comment tournent toutes les roues ... si on arrive à les utiliser. Merci pour le -X et -Y. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d9809$0$18310$426a3...@news.free.fr
Re: hping3 avec iptables
Hugo Deprez a écrit : Par contre ce que je ne saisis pas c'est pourquoi iptables, malgré ma règle -A OUTPUT -s 192.16.0.1/32 -j LOGACCEPT il applique la règle -A OUTPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j LOGDROP Es-ce que c'est le fait que cette dernière soit avant la règle LOGACCEPT ? Oui, l'ordre des règles compte. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e03db.1090...@plouf.fr.eu.org
Re: grub legacy versus ancien grub
Bonjour, mess-mate a écrit : Bonjour, voulant passer de grub2 à grub-legacy je me rends compte que les fichiers stage. et autres n'y sont plus. Par contre les fichiers de grub-common y sont et seraient donc utilisé aussi bien par grub-legacy que par grub2 ? Où est donc l'intérêt d'utiliser grub-legacy et en plus quel sont les commandes ? Pour l'intérêt je ne sais pas, mais les commandes des 2 versions sont décrites ici : http://grub.enbug.org/ListeDesCommandes A+ Luc -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e1e58.3020...@tls.cena.fr
Re: hping3 avec iptables
Hugo Deprez a écrit : Par contre ce que je ne saisis pas c'est pourquoi iptables, malgré ma règle -A OUTPUT -s 192.16.0.1/32 -j LOGACCEPT il applique la règle -A OUTPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j LOGDROP Es-ce que c'est le fait que cette dernière soit avant la règle LOGACCEPT ? Tu peux utiliser la commande iptables -L -v pour voir les compteurs associés aux règles. Cela te permettra de connaître les règles qui sont utilisées. -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | ===Debian=GNU/Linux=== -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e2b40.5030...@juliana-multimedia.com
grub-pc raid et lvm
Bonjour, j'ai cliqué un peu vite lors de la dernière mise à jour de grub-pc sur une squeeze amd64 et la machine ne boote plus, grub s'arrête en mode rescue. Le volume est un Raid0 (hardware Intel) composé de 2 disques sur lequel la partition /boot est une partition physique et les autres sous LVM. Depuis la mise à jour à 1.98+20100710-1 grub-probe ne voit plus les disques, même si je passe les modules raid dmraid lvm ext2 à grub-install r...@debian: grub-install --no-floppy --modules=raid dmraid lvm ext2 /dev/sda /usr/sbin/grub-probe: error: no such disk. /usr/sbin/grub-probe: error: no such disk. /usr/sbin/grub-probe: error: no such disk. You attempted a cross-disk install, but the filesystem containing /boot/grub does not support UUIDs. les points de montage actuels sont : /dev/mapper/ghisvain-root on / type ext3 (rw,errors=remount-ro) /dev/mapper/ghisvain-usr on /usr type ext3 (rw) /dev/md126p2 on /boot type ext3 (rw) /dev/mapper/ghisvain-data on /data type ext3 (rw) /dev/mapper/ghisvain-home on /home type ext3 (rw) /dev/mapper/ghisvain-opt on /opt type ext3 (rw) /dev/mapper/ghisvain-tmp on /tmp type ext2 (rw) /dev/mapper/ghisvain-var on /var type ext3 (rw) /dev/mapper/ghisvain-usr on /usr type ext3 (rw) les partitions sont sur le disque 1 du raid : Device Boot Start End Blocks Id System /dev/sda1 1 14 112423+ 6 FAT16 /dev/sda2 * 15 146 1060281 83 Linux Partition 2 does not end on cylinder boundary. /dev/sda3 146 60787 487098841+ 8e Linux LVM la doc est succincte, savez vous comment passer outre ce problème ? Merci Luc. PS : l'installation de la version 1.98+20100722-1 (sid) ne résout rien. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e2da4.3010...@tls.cena.fr
mandiri multi finance investasi forex
Bisnis Online Investasi ini dikelola oleh Mandiri Multi Finance (M2F). dimana M2F ini adalah perusahaan swasta yang bergerak diberbagai bidang keuangan (multi finance) yang diantaranya perdagangan umum, koperasi simpan pinjam,jasa dan teknologi networking secara umum serta berpartisipasi dalam menciptakan kegiatan usaha untuk bersama membangun perekonomian melalui internet. Sistem Investasi yang dibuat oleh M2F adalah bersifat Multi Daily Profit (MDP). dimana sistem MDP ini akan membuat investor mendapat Profit 190% dalam 30 hari tanpa kecuali dan akan dibagikan per 10 hari. (misalnya anda join tanggal 1, maka di hari ke 10, anda akan mendapat profit senilai dr investasi anda (akan dijelaskan di bawah), hari ke 20, dan hari ke 30). disini saya akan menjelaskan Ilustrasi Profit anda sebesar 190% sesuai jumlah investasi anda : M2F menyediakan 4 Paket Investasi dengan jumlah yang berbeda. 1. Rp. 250.000 dengan profit per 10 hari 158,333 jadi total per bulan 475.000 2. Rp. 750.000 dengan profit per 10 hari 475,000 jadi total per bulan 1.425.000 3. Rp. 1.750.000 dengan profit per 10 hari 1.108.333 jadi total per bulan 3.325.000 4. Rp. 3.750.000 dengan profit per 10 hari 2.375.000 jadi total per bulan 7.125.000 silakan klik disini : http://www.mandirimultifinance.com/?id=mansura -- View this message in context: http://old.nabble.com/mandiri-multi-finance-investasi-forex-tp29273058p29273058.html Sent from the debian-user-indonesian mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to debian-user-indonesian-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/29273058.p...@talk.nabble.com
mandiri multi finance investasi forex
Bisnis Online Investasi ini dikelola oleh Mandiri Multi Finance (M2F). dimana M2F ini adalah perusahaan swasta yang bergerak diberbagai bidang keuangan (multi finance) yang diantaranya perdagangan umum, koperasi simpan pinjam,jasa dan teknologi networking secara umum serta berpartisipasi dalam menciptakan kegiatan usaha untuk bersama membangun perekonomian melalui internet. Sistem Investasi yang dibuat oleh M2F adalah bersifat Multi Daily Profit (MDP). dimana sistem MDP ini akan membuat investor mendapat Profit 190% dalam 30 hari tanpa kecuali dan akan dibagikan per 10 hari. (misalnya anda join tanggal 1, maka di hari ke 10, anda akan mendapat profit senilai dr investasi anda (akan dijelaskan di bawah), hari ke 20, dan hari ke 30). disini saya akan menjelaskan Ilustrasi Profit anda sebesar 190% sesuai jumlah investasi anda : M2F menyediakan 4 Paket Investasi dengan jumlah yang berbeda. 1. Rp. 250.000 dengan profit per 10 hari 158,333 jadi total per bulan 475.000 2. Rp. 750.000 dengan profit per 10 hari 475,000 jadi total per bulan 1.425.000 3. Rp. 1.750.000 dengan profit per 10 hari 1.108.333 jadi total per bulan 3.325.000 4. Rp. 3.750.000 dengan profit per 10 hari 2.375.000 jadi total per bulan 7.125.000 silakan klik disini : http://www.mandirimultifinance.com/?id=mansura http://www.mandirimultifinance.com/?id=mansura -- View this message in context: http://old.nabble.com/mandiri-multi-finance-investasi-forex-tp29273072p29273072.html Sent from the debian-user-indonesian mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to debian-user-indonesian-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/29273072.p...@talk.nabble.com
Paquete de idioma para iceowl-extension
Hola, Este fin de semana instalé squeeze en la VM (no sin algún que otro problemilla, p. ej., GRUB tuve que instalarlo desde SGD, imposible instalarlo desde el instalador) y también instalé Icedove+Iceowl- extension (el cliente de correo y la extensión de calendario). Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? He visto este paquete: http://packages.debian.org/squeeze/iceowl-l10n-es-es Pero no estoy segura de que sea el correcto porque quiere instalar la aplicación iceowl completa (versión independiente) y no la necesito (ya tengo instalada la extensión). ¿Alguna idea? Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.08.42...@gmail.com
Deshabilitar la ejecución de .exe
Tengo una Debian Lenny con Gnome y wine instalado para una aplicación determinada, pero no deseo que los usuarios puedan ejecutar cualquier '.exe' clicando sobre estos. He probado a eliminar '/usr/share/applications/wine.desktop', pero todo sigue igual. ¿Cómo se cambian estas asociaciones?. Saludos --- Angel -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100726111424.7ad3b...@x32
Re: Deshabilitar la ejecución de .exe
El Mon, 26 Jul 2010 11:14:24 +0200, AngelD escribió: Tengo una Debian Lenny con Gnome y wine instalado para una aplicación determinada, pero no deseo que los usuarios puedan ejecutar cualquier '.exe' clicando sobre estos. He probado a eliminar '/usr/share/applications/wine.desktop', pero todo sigue igual. ¿Cómo se cambian estas asociaciones?. GNOME usa una bdd centralizada para la definición de los tipos MIME: *** Registering Applications for MIME Types http://library.gnome.org/admin/system-admin-guide/stable/mimetypes-registering.html.en *** Pero modificando la asociación no sé si evitarás que algún usuario listillo pueda ejecutar directamente el programa lanzando wine ruta_al_archivo.exe :-? Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.09.32...@gmail.com
[solución] Deshabilitar la ejecuc ión de .exe
El Mon, 26 Jul 2010 09:32:11 + (UTC) Camaleón noela...@gmail.com escribió: El Mon, 26 Jul 2010 11:14:24 +0200, AngelD escribió: Tengo una Debian Lenny con Gnome y wine instalado para una aplicación determinada, pero no deseo que los usuarios puedan ejecutar cualquier '.exe' clicando sobre estos. He probado a eliminar '/usr/share/applications/wine.desktop', pero todo sigue igual. ¿Cómo se cambian estas asociaciones?. GNOME usa una bdd centralizada para la definición de los tipos MIME: *** Registering Applications for MIME Types http://library.gnome.org/admin/system-admin-guide/stable/mimetypes-registering.html.en *** Sip, con utilizar 'update-desktop-database' tras los cambios en '/usr/share/applications', parece que hace lo que quiero Pero modificando la asociación no sé si evitarás que algún usuario listillo pueda ejecutar directamente el programa lanzando wine ruta_al_archivo.exe :-? Si llegan a la consola, y aprenden lo que es el wine creo que no me importaría que lo utilizaran. Sólo quiero que no ejecuten cualquier mierda por equivocación. Saludos --- Angel -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100726114812.3a7ca...@x32
Re: Paquete de idioma para iceowl-extension
El día 26 de julio de 2010 05:42, Camaleón noela...@gmail.com escribió: Hola, Este fin de semana instalé squeeze en la VM (no sin algún que otro problemilla, p. ej., GRUB tuve que instalarlo desde SGD, imposible instalarlo desde el instalador) y también instalé Icedove+Iceowl- extension (el cliente de correo y la extensión de calendario). Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? He visto este paquete: http://packages.debian.org/squeeze/iceowl-l10n-es-es Pero no estoy segura de que sea el correcto porque quiere instalar la aplicación iceowl completa (versión independiente) y no la necesito (ya tengo instalada la extensión). ¿Alguna idea? Camaleon, El paquete iceowl es el fork Debian de Mozilla Sunbird. El equivalente a iceowl-extension seria Mozilla Lightning. Proba con esa extension y nos cuentas. Estimo que deberia ser compatible. http://www.mozilla.org/projects/calendar/ http://www.mozilla.org/projects/calendar/lightning/ http://www.proyectonave.es/productos/sunbird https://addons.mozilla.org/en-US/thunderbird/addon/2313/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktiktrwpoynai+x0oajxihyh_nq7k2avypdsbb...@mail.gmail.com
Re: Paquete de idioma para iceowl-extension
El Mon, 26 Jul 2010 10:49:02 -0300, David Rodriguez escribió: El día 26 de julio de 2010 05:42, Camaleón escribió: (...) Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? (...) Camaleon, El paquete iceowl es el fork Debian de Mozilla Sunbird. El equivalente a iceowl-extension seria Mozilla Lightning. Proba con esa extension y nos cuentas. Estimo que deberia ser compatible. http://www.mozilla.org/projects/calendar/ http://www.mozilla.org/projects/calendar/lightning/ http://www.proyectonave.es/productos/sunbird https://addons.mozilla.org/en-US/thunderbird/addon/2313/ Sí, eso ya lo sabía :-) Pero no quiero instalar el paquete de Thunderbird + Lightning de Mozilla sino el de Debian, que para eso lo tienen empaquetado en los repositorios :-) El problema es que no existe (o no encuentro) el paquete de localizaciones al español para la extensión del calendario. ¿Es un error que se debe reportar? Me extraña, la verdad, porque debe ser uno de los programas más utilizados y por eso lo preguntaba. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.14.00...@gmail.com
Re: Paquete de idioma para iceowl-extension
El lun, 26-07-2010 a las 08:42 +, Camaleón escribió: Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? Imagino que ya lo habrás visto, pero por si las moscas... http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579950 Un saludo JulHer signature.asc Description: Esta parte del mensaje está firmada digitalmente
Re: Paquete de idioma para iceowl-extension
El Mon, 26 Jul 2010 16:36:28 +0200, Julio escribió: El lun, 26-07-2010 a las 08:42 +, Camaleón escribió: Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? Imagino que ya lo habrás visto, pero por si las moscas... http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579950 Si lo hubiera visto no habría preguntado ;-) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.15.12...@gmail.com
Re: Paquete de idioma para iceowl-extension
El día 26 de julio de 2010 12:12, Camaleón noela...@gmail.com escribió: El Mon, 26 Jul 2010 16:36:28 +0200, Julio escribió: El lun, 26-07-2010 a las 08:42 +, Camaleón escribió: Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? Imagino que ya lo habrás visto, pero por si las moscas... http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579950 Si lo hubiera visto no habría preguntado ;-) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Ok, pero en Icedove también pueden utilizarse addons de Mozilla y Ligthning[1] es una muy buena extensión de calendario y esta en español. he probado la ultima versión y me dice que no es compatible con Icedove 3.05. Alguien pudo instalar este addon con éxito? Saludos, [1]https://addons.mozilla.org/en-US/thunderbird/downloads/latest/2313/platform:2/addon-2313-latest.xpi -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktikc9bn_6rjmz4ja3yemxs2dw46rsdwndhaf+...@mail.gmail.com
Re: Paquete de idioma para iceowl-extension
El 26/07/10 11:33, David Rodriguez escribió: El día 26 de julio de 2010 12:12, Camaleónnoela...@gmail.com escribió: El Mon, 26 Jul 2010 16:36:28 +0200, Julio escribió: El lun, 26-07-2010 a las 08:42 +, Camaleón escribió: Me gustaría poner el calendario en español (es-es) pero no encuentro el paquete a instalar. En lenny lo tengo en inglés porque pensaba que no existía la traducción pero en Squeeze me extraña que no esté :-? Imagino que ya lo habrás visto, pero por si las moscas... http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579950 Si lo hubiera visto no habría preguntado ;-) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Ok, pero en Icedove también pueden utilizarse addons de Mozilla y Ligthning[1] es una muy buena extensión de calendario y esta en español. he probado la ultima versión y me dice que no es compatible con Icedove 3.05. Alguien pudo instalar este addon con éxito? Saludos, [1]https://addons.mozilla.org/en-US/thunderbird/downloads/latest/2313/platform:2/addon-2313-latest.xpi Hola. Yo tengo la versión 1.0b1 que me funciona mas o menos. Te copio la salida del acerca de (about) de la ayuda de Icedove 3.0.5 Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.10) Gecko/20100619 Lightning/1.0b1 Icedove/3.0.5 ThunderBrowse/3.2.8.1 Saludos. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4db585.7020...@gmail.com
Re: Paquete de idioma para iceowl-extension
El Mon, 26 Jul 2010 13:03:47 -0300, David Rodriguez escribió: El día 26 de julio de 2010 12:12, Camaleón escribió: (...) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Ok, pero en Icedove también pueden utilizarse addons de Mozilla y Ligthning[1] es una muy buena extensión de calendario y esta en español. he probado la ultima versión y me dice que no es compatible con Icedove 3.05. Alguien pudo instalar este addon con éxito? Sí, lo sé... pero la última vez que mezclé una versión de Thunderbird instalado desde los repos de la distribución (openSUSE) con el plugin de Lightning, bajado de la web de Mozilla, el calendario no funcionaba :-( Por eso prefiero no mezclar los componentes. Gato escaldado. Saludos, [1]https://addons.mozilla.org/en-US/thunderbird/downloads/latest/2313/ platform:2/addon-2313-latest.xpi Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.16.48...@gmail.com
Re: Paquete de idioma para iceowl-extension
El 26/07/10 12:18, Camaleón escribió: El Mon, 26 Jul 2010 13:03:47 -0300, David Rodriguez escribió: El día 26 de julio de 2010 12:12, Camaleón escribió: (...) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Ok, pero en Icedove también pueden utilizarse addons de Mozilla y Ligthning[1] es una muy buena extensión de calendario y esta en español. he probado la ultima versión y me dice que no es compatible con Icedove 3.05. Alguien pudo instalar este addon con éxito? Sí, lo sé... pero la última vez que mezclé una versión de Thunderbird instalado desde los repos de la distribución (openSUSE) Esto es Debian. Saludos con el plugin de Lightning, bajado de la web de Mozilla, el calendario no funcionaba :-( Por eso prefiero no mezclar los componentes. Gato escaldado. Saludos, [1]https://addons.mozilla.org/en-US/thunderbird/downloads/latest/2313/ platform:2/addon-2313-latest.xpi Saludos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4dc008.1000...@gmail.com
Re: Paquete de idioma para iceowl-extension
El Mon, 26 Jul 2010 12:34:08 -0430, Juan Lavieri escribió: El 26/07/10 12:18, Camaleón escribió: (...) Sí, lo sé... pero la última vez que mezclé una versión de Thunderbird instalado desde los repos de la distribución (openSUSE) Esto es Debian. También lo sé. Se nota porque en openSUSE no tienen tantos bugs abiertos para Thunderbird como en Debian :-) http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=icedove;dist=unstable Status * 228 Outstanding * 10 Forwarded * 11 Resolved * 34 From other Branch Tela... Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.17.26...@gmail.com
instalar debian en un solaris
Buenas: alguna idea como es el tema de instalar debian en una zona de solaris ? o algo similar que se pueda hacer. Bytes -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! http://www.rinorondan.com.ar http://counter.li.org #517918
Re: instalar debian en un solaris
El Mon, 26 Jul 2010 18:37:37 -0300 Rino Rondan villadalm...@gmail.com escribió: alguna idea como es el tema de instalar debian en una zona de solaris ? o algo similar que se pueda hacer. Mi no entender. ¿Te refieres a instalar Debian en hardware [1]Sparc?. Hace un tiempo tuve unas [2]Enterprise 250 con Debian, funcionando muy bien. El port del kernel para esta máquina (y otras de su generación) estaba muy desarrollado. Desconozco si en hardware posterior a este la situación se mantiene. Si te refieres a instalar Linux en un [3]LDOM de Solaris, parece que también se puede, aunque nunca lo haya probado. Saludos --- Angel [1]http://www.debian.org/ports/sparc/ [2]http://www.ecobinary.com/ecart/images/Picture%20054.jpg [3]http://en.wikipedia.org/wiki/Logical_Domains -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100727000647.57b4e...@x32
Re: instalar debian en un solaris
Buenas: si la idea es instalar una zona pero de linux con debian, ya tengo solaris 10 en un netra t1 con una zona instalada. Saludos -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! http://www.rinorondan.com.ar http://counter.li.org #517918
Re: instalar debian en un solaris
El lun, 26-07-2010 a las 19:29 -0300, Rino Rondan escribió: Buenas: si la idea es instalar una zona pero de linux con debian, ya tengo solaris 10 en un netra t1 con una zona instalada. Saludos -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! http://www.rinorondan.com.ar http://counter.li.org #517918 Fe de erratas: Salvajes; no salvages. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1280184474.2927.0.ca...@anibal-desktop
Re: instalar debian en un solaris
Fe de erratas: Salvajes; no salvages. Es salvages porque es una frase del 1800 de la epoca de la Confederacion Argentina ( Unitarios y Federales) Saludos -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! http://www.rinorondan.com.ar http://counter.li.org #517918
Re: Paquete de idioma para iceowl-extension
El Mon, 26 Jul 2010 16:48:31 +, Camaleón escribió: El Mon, 26 Jul 2010 13:03:47 -0300, David Rodriguez escribió: El día 26 de julio de 2010 12:12, Camaleón escribió: (...) Gracias, me ahorro el poner el bug... Pues en inglés se queda hasta que lo añadan :-( Ok, pero en Icedove también pueden utilizarse addons de Mozilla y Ligthning[1] es una muy buena extensión de calendario y esta en español. he probado la ultima versión y me dice que no es compatible con Icedove 3.05. Alguien pudo instalar este addon con éxito? Sí, lo sé... pero la última vez que mezclé una versión de Thunderbird instalado desde los repos de la distribución (openSUSE) con el plugin de Lightning, bajado de la web de Mozilla, el calendario no funcionaba :-( Por eso prefiero no mezclar los componentes. Gato escaldado. Saludos, [1]https://addons.mozilla.org/en-US/thunderbird/downloads/latest/2313/ platform:2/addon-2313-latest.xpi Saludos, -- Camaleón Hola. No se si será lo mismo, pero yo uso iceweasel y en el las extensiones para firefox. La gran mayoría sin problemas. Suerte. -- Marcos Delgado -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i2l3v5$pt...@dough.gmane.org
OT: Debian BSD
Estimados/as: ¿Alguien sabe algo acerca del proyecto Debian/BSD? Hace un tiempo se comentó por acá algo por acá pero en nungún otro lugar leí nada más. Estoy con ganas de probar BSD pero cuando leí ese comentario decidí esperar a la salida de una Debian/BSD. Disculpen por el OT, es sólo una curiosidad que tengo. Saludos -- Sergio Bess Buenos Aires. Argentina skype: sergio.bess jabber: sergio.b...@jabber.org Linux counter: 486274 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e22b1.4010...@yahoo.com
OT: Debian BSD
Estimados/as: ¿Alguien sabe algo acerca del proyecto Debian/BSD? Hace un tiempo se comentó por acá algo por acá pero en nungún otro lugar leí nada más. Estoy con ganas de probar BSD pero cuando leí ese comentario decidí esperar a la salida de una Debian/BSD. Disculpen por el OT, es sólo una curiosidad que tengo. Saludos -- Sergio Bess Buenos Aires. Argentina skype: sergio.bess jabber: sergio.b...@jabber.org Linux counter: 486274 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4e272d.8040...@yahoo.com
Re: instalar debian en un solaris
2010/7/27 Rino Rondan villadalm...@gmail.com: Fe de erratas: Salvajes; no salvages. Es salvages porque es una frase del 1800 de la epoca de la Confederacion Argentina ( Unitarios y Federales) Saludos Muy Buenas Noches: El concepto de Zona (o Container) que se maneja a partir de Solaris 10 es, para dar una idea, algo como crear chroot o FreeBSD Jail. Esto lo hace exclusivo de este sistema operativo. Más técnicamente, es una Virtualización a nivel de Sistema Operativo, que permite crear múltiples instancias aisladas del sistema operativo[1]. Existen algunos sistemas operativos que realizan Traducción de llamadas al sistema (Systems Calls Translations) [2], de los cuales sólo he oído hablar, y según leo por allí cuenta RedHat Enterprise Linux 3 una herramienta llamada 'lx' que sólo corre en x86. Ahora bien, existen varios modelos de equipos de Sun Microsystems que aceptan virtualización mediante Hypervisor Type 1 llamada SPARC Hypervisor. Estos, cuentan con un firmware que se encarga de realizar el control, presentación y monitoreo de los recursos, y un apoyo del sistema operativo que se comporta como un host/guest (host para administración y a la vez guest de la Hypervisor). La solución completa se conoce como Sun Logical Domains o LDom [3], lo cuales crean una máquina virtual completa (Full Virtual Machine). Esta tecnología está sólo disponible para SPARC, si es tu caso particular. Yo he instalado sólo Solaris en estas máquinas virtuales, y funcionan correctamente (obviamente). He instalado también Debian sobre procesadores SPARC (sin tecnología LDOM) sin problemas. Ahora, pienso que no debe presentar mayor inconveniente instalar Debian sobre una máquina virtual creada bajo esta tecnología. De hecho he leído por allí que está certificado para algunas distribuciones como Ubuntu (derivado de Debian). Sobre Sun Solaris x86, hasta ahora las alternativas que conozco y están certificadas son Xen para ejecutar Solaris y otros sistemas soportados, y Sun xVM (o mas conocido como VirtualBox). Cada una con sus complejidades y particularidades para la instalación. Pueden existir otras, dado a que x86 y x86_64 es soportado por KVM y otras, pero hay que probar. Me ha llamado la atención el tema de este hilo, y voy a intentar probarlo en un laboratorio, si tengo disponible algún equipo claro está, y de ser el caso, enviar los resultados a esta lista para los interesados. Saludos, [1] http://en.wikipedia.org/wiki/Operating_system-level_virtualization [2] http://en.wikipedia.org/wiki/Solaris_Containers [3] http://en.wikipedia.org/wiki/Logical_Domains -- German Cardozo Chirinos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktiksqkidqm5mqsva=yuvaj+tfmzfeuj4=+pul...@mail.gmail.com
Re: instalar debian en un solaris
Buenas german: en mi caso tengo un server sun (netra t1) pero bueno ya con la info que diste puedo investigar un poco mas ... me abriste la idea de sacar solaris y poner debian sobre sparc para ver que tal anda... -- Viva La Santa Federacion!! Mueran Los Salvages Unitarios!! http://www.rinorondan.com.ar http://counter.li.org #517918
Re: OT: Debian BSD
Acá tenés algo de información oficial (en inglés): http://wiki.debian.org/Debian_GNU/kFreeBSD Saludos. - http://www.gnu.org/philosophy/no-word-attachments.es.html signature.asc Description: PGP signature
Re: sqstat
Hola, Tal vez te sirva este enlace: http://www.ecualug.org/2008/01/15/comos/como_implementar_sqstat_para_monitoreo_de_usuarios_en_vivo Acuerdate, Google o yahoo son tus amigos :D, no te olvides consultarlos primero. --- El jue, 7/22/10, islanis isla...@infomed.sld.cu escribió: De: islanis isla...@infomed.sld.cu Asunto: sqstat A: debian-user-spanish@lists.debian.org Fecha: jueves, 22 de julio de 2010, 12:41 pm hola amigos como puedo implementar un chequeo en tiempo real con el sqstat, es decir me hace falta un ayuda o un lugar donde posteen algo de eso me hace falta la direccion , porque lo que mas me urge es loq ue se hace en el squid.conf gracias de antemano -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas Infomed: http://www.sld.cu/ -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4882be.9030...@infomed.sld.cu -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/947508.47254...@web45112.mail.sp1.yahoo.com
Problema som
Ola Pessoal, Estou tentando fazer chat por voz no debian lenny utilizando amsn, skype e não estou conseguindo. Parece que as bibliotecas não esta consiguindo captar minha voz, pois quando vou fazer os testes dos programas eu esculto minha voz porem ela não é gravada e repeitada, ou seja os progrmas nao estao consiguindo capta minha voz. Ja instalei a biblioteca snack e ate agora nada. emyg...@emygdio:~/Downloads/amsn-0.98.3$ dpkg -s libsnack2 Package: libsnack2 Status: install ok installed Priority: optional Section: libs Installed-Size: 852 Maintainer: Sergei Golovan sgolo...@debian.org Architecture: i386 Source: snack Version: 2.2.10-dfsg1-8 Replaces: libsnack2-alsa, snack Depends: libc6 (= 2.7-1), libogg0 (= 1.1.0), libvorbis0a (= 1.1.2), libvorbisenc2 (= 1.1.2), libx11-6, tcl (= 8.4.16-1) | tclsh Suggests: libsnack2-doc Conflicts: libsnack2-alsa Description: Sound extension to Tcl/Tk and Python/Tkinter - Tcl/Tk library Snack is an extension to the Tcl/Tk scripting language that adds sound functionality. There are commands to play, record, edit, and even visualize sound. Snack supports in-memory sound objects, file based audio, and streaming audio. It handles file formats such as WAV, AU, AIFF, MP3, and OGG Vorbis. . This package includes Tcl/Tk snack package and uses OSS as a sound engine. Homepage: http://www.speech.kth.se/snack/ emyg...@emygdio:~/Downloads/amsn-0.98.3$ Alguem saberia o que esta faltando fazer ? Obrigado
notify-send problemas com usuário root
Oi pessoal , Bom Dia . Preciso utilizar o send-notify com prioridade root , porém estou tendo problemas na hora da execução: * libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ** (notify-send:3149): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ** (notify-send:3149): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed* Estou usando o udev para reconhecer um novo dispositivo USB , e quando é montado um novo diretório em /dev/ queria que abrisse um script com o send-notify . Há um parametro chamado RUN+= no udev que faz isso, porém creio que ele executa como root pois não consigo obter resultados do notify-send Alguém sabe o que deve ser feito? Desde já agradeço att -- Frederico Martins P Junior fredim.wordpress.com
Re: [OFF] - Sistema pra reserva de equipamentos e salas online
+ um : http://www.conssoli.com.br/phpscheduleit Em 10 de julho de 2010 15:12, Flávio Oliveira flao...@gmail.com escreveu: Amigos, Estou procurando algum sistema (projeto) que tenha como foco o gerenciamento/reservas de bens diversos (salas de video, projetores, cameras...). Datas de reservas em agenda, possibilidade de reserva on line também, algo nesse sentido. Conheceriam algum pra indicar? (claro, pra rodar numa máquina com Debian) Qualquer ajudar será bem vinda! Flávio
Re: notify-send problemas com usuário root
Olha, o notify-send não vem por padrão instalado e ainda por cima depende do core do gnome, isso não lhe preocupa ? Apenas como teste, tente o gxmessage no lugar do notify-send, assim : gxmessage -borderless -buttons Prosseguir -nofocus -center -iconic -timeout $tempo_espera -title $titulo $mensagem Se não funcionar, provavelmente estes comandos não tem acesso ao display grafico e muito provavelmente é um daemon do gnome que busca informações relevantes para serem mostradas, daí sua pesquisa é onde dizer para o gnome que isso que fiz é relevante para ser mostrado. Se funcionar, então tem que se concentrar no porque do notify-send não consegue fazê-lo. []'s Em 26 de julho de 2010 10:36, Frederico Martins fred...@gmail.com escreveu: Oi pessoal , Bom Dia . Preciso utilizar o send-notify com prioridade root , porém estou tendo problemas na hora da execução: libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ** (notify-send:3149): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ** (notify-send:3149): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed ** (notify-send:3149): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed Estou usando o udev para reconhecer um novo dispositivo USB , e quando é montado um novo diretório em /dev/ queria que abrisse um script com o send-notify . Há um parametro chamado RUN+= no udev que faz isso, porém creio que ele executa como root pois não consigo obter resultados do notify-send Alguém sabe o que deve ser feito? Desde já agradeço att -- Frederico Martins P Junior fredim.wordpress.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktinhpgosozyabp8z2fxãrcmkeo9boo1kxq_...@mail.gmail.com
Erro estranho na interface de rede
Caros, Estou com uma interfade dual da HP NC360T com chipset intel (Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)) tenho me deparado com o seguinte erro ao executar o mii-tool: mii-tool -w SIOCGMIIREG on eth0 failed: Input/output error SIOCGMIIREG on eth0 failed: Input/output error 11:53:04 eth0: no link SIOCGMIIREG on eth1 failed: Input/output error SIOCGMIIREG on eth1 failed: Input/output error Estou procurando no google por esse erro SIOCGMIIREG on eth1 failed: Input/output error, mas ate agora nao encontrei nada mais relevante, se alguem ja puder me dizer se esse erro impede a maquina de entrar em produção, pois as interfaces estao pegando ip normalmente, fiz vários testes de conectvidade e aparentemente esta tudo normal Att. -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713
Re: Erro estranho na interface de rede
Esta placa é PCIe ? Qual a versão do kernel ? Tive problemas um uma placa D-Link PCIe e o kernel 2.6.26 do Lenny . Atualizei o kernel para o do Backports ( 2.6.32 ) e tudo ficou OK . Mas lí em alguns forums que estas placas tem problemas com bonding, como eu não uso bonding isto não me afetou . Fábio Rabelo Em 26 de julho de 2010 14:53, Leandro Moreira lean...@leandromoreira.eti.br escreveu: Caros, Estou com uma interfade dual da HP NC360T com chipset intel (Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)) tenho me deparado com o seguinte erro ao executar o mii-tool: mii-tool -w SIOCGMIIREG on eth0 failed: Input/output error SIOCGMIIREG on eth0 failed: Input/output error 11:53:04 eth0: no link SIOCGMIIREG on eth1 failed: Input/output error SIOCGMIIREG on eth1 failed: Input/output error Estou procurando no google por esse erro SIOCGMIIREG on eth1 failed: Input/output error, mas ate agora nao encontrei nada mais relevante, se alguem ja puder me dizer se esse erro impede a maquina de entrar em produção, pois as interfaces estao pegando ip normalmente, fiz vários testes de conectvidade e aparentemente esta tudo normal Att. -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713
Re: Erro estranho na interface de rede
Bonding é qdo vc faz uma ou mais placas de rede se comportarem como se fossem apenas uma, para redundância ou aumento de banda Fábio Rabelo Em 26 de julho de 2010 15:26, Leandro Moreira lean...@leandromoreira.eti.br escreveu: Fabio, Estou usando debian lenny 2.6.26, vou atualizar meu kernel para o kernel do backports, o q seriam esses problemas com bonding? Att. Leandro Moreira. Em 26 de julho de 2010 15:06, Fábio Rabelo madt...@gmail.com escreveu: Esta placa é PCIe ? Qual a versão do kernel ? Tive problemas um uma placa D-Link PCIe e o kernel 2.6.26 do Lenny . Atualizei o kernel para o do Backports ( 2.6.32 ) e tudo ficou OK . Mas lí em alguns forums que estas placas tem problemas com bonding, como eu não uso bonding isto não me afetou . Fábio Rabelo Em 26 de julho de 2010 14:53, Leandro Moreira lean...@leandromoreira.eti.br escreveu: Caros, Estou com uma interfade dual da HP NC360T com chipset intel (Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)) tenho me deparado com o seguinte erro ao executar o mii-tool: mii-tool -w SIOCGMIIREG on eth0 failed: Input/output error SIOCGMIIREG on eth0 failed: Input/output error 11:53:04 eth0: no link SIOCGMIIREG on eth1 failed: Input/output error SIOCGMIIREG on eth1 failed: Input/output error Estou procurando no google por esse erro SIOCGMIIREG on eth1 failed: Input/output error, mas ate agora nao encontrei nada mais relevante, se alguem ja puder me dizer se esse erro impede a maquina de entrar em produção, pois as interfaces estao pegando ip normalmente, fiz vários testes de conectvidade e aparentemente esta tudo normal Att. -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713 -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: lean...@leandromoreira.eti.br Tel.: + 55(32) 9906-5713
Res: Sites https no Iptables/Squid na porta 80
Boa tarde, Não sei se os critérios são os mesmos, mas no meu estado (MS) tive que desviar as URLs onde ficam os servidores do Sefaz do proxy, usando as regras abaixo: Inclua esse bloco no seu script de firewall antes daquela famora regra que força/direciona as portas 80 e 443 para o squid (3128) echo -n Excecoes ao proxy... $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 80 -d homologacao.nfe.ms.gov.br -j ACCEPT $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 443 -d homologacao.nfe.ms.gov.br -j ACCEPT $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 80 -d producao.nfe.ms.gov.br -j ACCEPT $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 443 -d producao.nfe.ms.gov.br -j ACCEPT $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 80 -d www.nfe.fazenda.gov.br -j ACCEPT $iptables -t nat -A PREROUTING -s $REDEINT -p tcp --dport 443 -d www.nfe.fazenda.gov.br -J ACCEPT echo -n echo REGRA APLICADA.[ OK ] Adapte as variáveis conforme a sua rede e os endereços conforme as urls do seu estado. Depois, inclua a literal *nfe* na opção avançada de exceções do proxy dos navegadores das máquinas que emitem nota fiscal. Uso em vários clientes onde temos proxy em modo autenticado rodando... funciona certinho. Abraços Julio Lopez De: Vinícius Batistela vinibatist...@gmail.com Para: Sandro Wambier sandrowamb...@gmail.com Cc: Flávio Rodrigues flavio.li...@paradoxo.inf.br; Lista DEBIAN debian-user-portuguese@lists.debian.org Enviadas: Domingo, 25 de Julho de 2010 5:17:03 Assunto: Re: Sites https no Iptables/Squid na porta 80 Voce utiliza proxy marcado no browser? o programa do Sefaz não pega configurações de proxy do IE? Se sim, não adianta excluir do proxy via iptables. 2010/7/12 Sandro Wambier sandrowamb...@gmail.com Quanto ao https, libere no seu squid e firewall a porta 443, e faça um teste, libere qualquer endereço .gov.br no seu squid, Em 12 de julho de 2010 20:29, Sandro Wambier sandrowamb...@gmail.com escreveu: Olá Flávio, posta ae o access.log do squid, pra ter certeza que ele não ta bloqueando, e assim ir para o firewall. Att. Sandro Wambier Em 12 de julho de 2010 15:29, Flávio Rodrigues flavio.li...@paradoxo.inf.br escreveu: Olá pessoal! Estou com problemas em liberar o acesso em um aplicativo que foi instalado para emissão da Nota Fiscal Eletrônica (NFe). Aqui usamos Proxy (Squid) autenticado por usuários. Crei uma acl bem no inicio do squid.conf liberando totalmente o acesso para o site da Sefaz. Também criei regras no meu script de firewall (iptables) para tirar do redirecionamento para a porta do proxy do tráfego da minha Lan para a Sefaz e vice-versa, ou seja, estou excluindo TODO o tráfego para o site da Sefaz (ida e volta) do Squid, mas ainda continua bloqueando o acesso! No suporte deles, eles mencionam para liberar também para o endereço deles o https na porta 80 Alguém pode me ajudar nisso? Abraço! -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c3b5eff.7010...@paradoxo.inf.br -- Vinícius Batistela Bacharel em Ciência da Computação Analista de Suporte
Como Instalar o Debian em um Processador ARM sem Boot
Oi Galera preciso de uma ajuda! Um tutorial de como fazer para instalar o Debian no netbook que já esta com o Windows CE 5 , e que não tem bios, ou sej não consigo dar boot na inicialização. Por mim gostaria de apagar o Windows CE e deixar só o Linux, mas caso não seja possível gostaria de instalar o Linux e usa-lo invés desse Windows ce. Por favor meu ajudem. As características do notebook são: Sistema Operacional : Windows Ce 5 CPU: ARM920 266MHZ MULTIMIDIA PROCESSOR Memoria: SDRAM: 128MB AT 133MHZ NAND FLASH STORAGE 512~4GB Att Kadu
Re: threads
De uma olhada na configuração do arquivo /etc/security/limits.conf [0] Acho que pode resolver seu problema. [0]http://linux.die.net/man/5/limits.conf -- Rafael Teixeira Duarte - www.rafaelduarte.org Grupo de usu�...@s Debian em Goiás - www.debian-go.org Projeto Software Livre - Goiás - wiki.softwarelivre.org/PSLGO Associação Software Livre de Goiás - www.aslgo.org.br -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlktin=yw=vjzqbqquz2pjrjqwslp3p14aba8nep...@mail.gmail.com
Como Instalar o Debian em um Processador ARM sem Boot
Oi Galera preciso de uma ajuda! Um tutorial de como fazer para instalar o Debian no netbook que já esta com o Windows CE 5 , e que não tem bios, ou sej não consigo dar boot na inicialização. Por mim gostaria de apagar o Windows CE e deixar só o Linux, mas caso não seja possível gostaria de instalar o Linux e usa-lo invés desse Windows ce. Por favor meu ajudem. As características do notebook são: Sistema Operacional : Windows Ce 5 CPU: ARM920 266MHZ MULTIMIDIA PROCESSOR Memoria: SDRAM: 128MB AT 133MHZ NAND FLASH STORAGE 512~4GB Att Kadu
Re: Failed to play sound: Sound disabled ???
On Sun, 25 Jul 2010 23:09:36 +0100, abdelkader belahcene wrote: Thank for reply, the theme sound is grayed !!! no possibility to change anything ??? maybe elsewhere thanks regards Are you on testing or sid? There should be a drop-down menu to select the theme in use (by default is disabled -no sounds-, so you have to click on the combo box and choose default theme to enable system sounds). You can also launch gnome-volumen-control in console to check for any error messages. BTW, it is working fine here (testing) :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.06.40...@gmail.com
Re: pick invalid ones from package list
On Lu, 26 iul 10, 01:20:10, T o n g wrote: Hi, I'm wondering what's the best way to pick invalid package names from a package list. I am keeping a package list of my installed packages, but over the time, package can be retired, obsoleted, or simple increase in version in its name. I just want to pick out all those invalid ones. How are you creating that list? Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Error during safe-upgrade: unable to stat `./mnt'
Hi, When I try to do a safe-upgrade on a Lenny system I get the following error: dpkg: error processing /var/cache/apt/archives/base-files_5lenny6_amd64.deb (--unpack): unable to stat `./mnt' (which I was about to install): No such device or address I'm thinking this might be caused a bad block or bad cabling. Anyone who knows what this is? Thanks in advance! Some more information: # ls /mnt ls: cannot access /mnt: No such device or address # cd /mnt # pwd /mnt # ls ls: cannot open directory .: No such device or address -- From the syslog --- Jul 25 17:02:47 server kernel: [4684955.154845] ide-cd: cmd 0x3 timed out Jul 25 17:02:47 server kernel: [4684955.154884] hda: lost interrupt Jul 25 17:03:47 server kernel: [4685015.281517] hda: lost interrupt Jul 25 17:04:47 server kernel: [4685075.638334] ide-cd: cmd 0x3 timed out Jul 25 17:04:47 server kernel: [4685075.638334] hda: lost interrupt Jul 25 17:05:47 server kernel: [4685135.767911] ide-cd: cmd 0x3 timed out Jul 25 17:05:47 server kernel: [4685135.767950] hda: lost interrupt -- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d3b54.70...@gmail.com
Re: Error during safe-upgrade: unable to stat `./mnt'
Some more information: Al other folders have normal permissions, /mnt on the other hand has: -- # ls -la / d? ? ???? mnt --- --- # mv /mnt ~ mv: cannot stat `/mnt': No such device or address --- --- # rm -Rf /mnt rm: cannot remove `/mnt': No such device or address ---
Re: Error during safe-upgrade: unable to stat `./mnt'
On Lu, 26 iul 10, 09:53:21, Aniruddha wrote: Some more information: Al other folders have normal permissions, /mnt on the other hand has: -- # ls -la / d? ? ???? mnt --- --- # mv /mnt ~ mv: cannot stat `/mnt': No such device or address --- --- # rm -Rf /mnt rm: cannot remove `/mnt': No such device or address --- You should run a fsck on your filesystems. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
NTLM: incorrect bytecount for NEGPROT response data
Hello all. I use several Debian servers running since 2005. All them use Samba-NTLM-Cyrus SASL authentication chain for Cyrus IMAP and Postfix SMTP services, in very trivial form: pwcheck_method: saslauthd mech_list: plain ntlm ntlm_server: 127.0.0.1 The problem: upon upgrade from Samba 3.0 to Samba 3.2, the NTLM athentication dies both for SMTP and IMAP clients, with the following log records: Jul 22 17:40:22 obolon postfix/smtpd[26140]: NTLM server step 1 Jul 22 17:40:22 obolon postfix/smtpd[26140]: client flags: 8207 Jul 22 17:40:22 obolon postfix/smtpd[26140]: NTLM: incorrect bytecount for NEGPROT response data Same happens both with Debian-provided Samba (3.2.5 in Lenny) and with self-built Samba 3.2.4; no difference. Old self-built Samba 3.0.25 authenticates SASL clents fine, without any problems. Can anyone offer any explanations, configuration changes or diagnostic tests? Alexey -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d43a0.4040...@gctrials.com
COM-port (RS-232) problems
Hello! I have a problem with UPS FSP EP650 with COM-port and Debian. The device is workable (I have tested it under Windows), but under Linux it doesn't works. My hardware: motherboard: Gigabyte GA-D510UD (Intel NM10, iTE IT8720 chipset) (Intel Atom 510 processor) UPS: FSP EP 650 My software: Debian Squeeze with kernel 2.6.32-5 NUT COM-ports has detected: dmesg | grep tty [1.244470] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [1.244596] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [1.245034] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [1.245223] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A The same IRQ modes setted in BIOS. but cat /dev/ttyS0 or cat /dev/ttyS1 shows blank screen minicom doesn't work also I use NUT for my ups with following ups.conf: user = root [fsp] driver = apcsmart port = /dev/ttyS0 nas:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - APC Smart protocol driver 2.03 (2.4.3) APC command table version 2.1 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 Check the cabling, port name or model name and try again Driver failed to start (exit status=1) Also I tried to write and read something from COM-port using simple program written in Python - no results. A suppose, that it is lowlevel problem with modules or kernel. Can anybody help me? Best regards, Max Usachev -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d4ad0.1070...@gmail.com
Re: Re: Failed to play sound: Sound disabled ???
Dne, 26. 07. 2010 00:09:36 je abdelkader belahcene napisal(a): Thank for reply, the theme sound is grayed !!! no possibility to change anything ??? maybe elsewhere thanks regards bela Have you enabled System/Administration/Users and groups/Username/Options/User permissions/Can use sound devices ? -- Regards, Klistvud Certifiable Loonix User #481801 http://bufferoverflow.tiddlyspot.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1280134415.2874...@compax
Re: Error during safe-upgrade: unable to stat `./mnt'
On Monday 26 July 2010 02:37:56 Aniruddha wrote: dpkg: error processing /var/cache/apt/archives/base-files_5lenny6_amd64.deb (--unpack): unable to stat `./mnt' (which I was about to install): No such device or address # ls /mnt ls: cannot access /mnt: No such device or address # cd /mnt # pwd /mnt # ls ls: cannot open directory .: No such device or address -- From the syslog --- Jul 25 17:02:47 server kernel: [4684955.154845] ide-cd: cmd 0x3 timed out Jul 25 17:02:47 server kernel: [4684955.154884] hda: lost interrupt Jul 25 17:03:47 server kernel: [4685015.281517] hda: lost interrupt Jul 25 17:04:47 server kernel: [4685075.638334] ide-cd: cmd 0x3 timed out Jul 25 17:04:47 server kernel: [4685075.638334] hda: lost interrupt Jul 25 17:05:47 server kernel: [4685135.767911] ide-cd: cmd 0x3 timed out Jul 25 17:05:47 server kernel: [4685135.767950] hda: lost interrupt -- Maybe something mounted your optical media on /mnt, and the disk / drive is no longer available but the filesystem is still mounted. umount -f and umount -l could help here. -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ signature.asc Description: This is a digitally signed message part.
Re: COM-port (RS-232) problems
On Mon, 26 Jul 2010 11:44:00 +0300, Max Usachev wrote: I have a problem with UPS FSP EP650 with COM-port and Debian. The device is workable (I have tested it under Windows), but under Linux it doesn't works. (...) Most likely a problem coming from: 1/ NUT has wrong permissions to access serial port 2/ NUT device driver is wrong (...) I use NUT for my ups with following ups.conf: user = root [fsp] driver = apcsmart Are you sure this driver is the correct one for your UPS? :-? port = /dev/ttyS0 nas:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - APC Smart protocol driver 2.03 (2.4.3) APC command table version 2.1 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 Check the cabling, port name or model name and try again Driver failed to start (exit status=1) Additional data for your review: *** [Nut-upsuser] FSP UPS not listed as supported, but seems to work... at least a little... http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-April/006023.html *** Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.09.11...@gmail.com
best way to backup a full encrypted LUKS system
Hello to everybody! I have a system running off a fully encrypted 160GB HD using LVM over LUKS. Obviously, taking an image of the disk clonezilla-style is very inefficient as I need 160GB per backup. So, regularly, I take a full tar of the system while the system is live. This way, data will not be lost, but in case of a disk failure, it will take some time before I set up manually the LUKS, then the LVM, then restore the data from the tar, restore grub, MBR etc *. Is there a better way? More efficient? How do others deal with that? Thanks! G. * By the way, I haven't tried this procedure, but my educated guess is that it will work... smime.p7s Description: S/MIME Cryptographic Signature
Re: Debian cd supporting ext4.
Thank You for Your time and answer, Wolodja: Why don't you just use the images provided by kmuto? They are exactly what you are looking for. I don't get your resistence ... No any resistance absolutely! I think too that it is the thing I'm looking for. Just two important things remain for me w/ the solution: 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer. Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). 2. I see that I still will need probably, to have /boot at ext3 - the thing I do not want, so I want to know a lot on this before I try to have ext4 again. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d6af6.cf7d0e0a.16f3.8...@mx.google.com
Re: COM-port (RS-232) problems
26.07.2010 12:11, Camaleón пишет: On Mon, 26 Jul 2010 11:44:00 +0300, Max Usachev wrote: I have a problem with UPS FSP EP650 with COM-port and Debian. The device is workable (I have tested it under Windows), but under Linux it doesn't works. (...) Most likely a problem coming from: 1/ NUT has wrong permissions to access serial port Permissions is Ok, couse I get errors when comment user = root. 2/ NUT device driver is wrong (...) I use NUT for my ups with following ups.conf: user = root [fsp] driver = apcsmart Are you sure this driver is the correct one for your UPS? :-? I hope, but apcupsd also doesn't work correct: 2010-07-26 17:00:31 apctest 3.14.8 (16 January 2010) debian Checking configuration ... Attached to driver: apcsmart sharenet.type = DISABLE cable.type = CUSTOM_SMART You are using a SMART cable type, so I'm entering SMART test mode mode.type = APCSMART_UPS Setting up the port ... apctest FATAL ERROR in smartsetup.c at line 184 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct. apctest error termination completed I think, it is general Kernel + COM-port problem port = /dev/ttyS0 nas:~# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - APC Smart protocol driver 2.03 (2.4.3) APC command table version 2.1 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 Check the cabling, port name or model name and try again Driver failed to start (exit status=1) Additional data for your review: *** [Nut-upsuser] FSP UPS not listed as supported, but seems to work... at least a little... http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-April/006023.html *** They use UPS with USB port. Greetings, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d6b42.4000...@gmail.com
Re: COM-port (RS-232) problems
On Mon, 26 Jul 2010 14:02:26 +0300, Max Usachev wrote: 26.07.2010 12:11, Camaleón пишет: Most likely a problem coming from: 1/ NUT has wrong permissions to access serial port Permissions is Ok, couse I get errors when comment user = root. You have to check udev rules. http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/ [fsp] driver = apcsmart Are you sure this driver is the correct one for your UPS? :-? I hope, No hoping here :-), just review the list of NUT supported devices and if yours is not listed, start trying with a generic one (i.e., genericups) but apcupsd also doesn't work correct: 2010-07-26 17:00:31 apctest 3.14.8 (16 January 2010) debian Checking configuration ... Attached to driver: apcsmart sharenet.type = DISABLE cable.type = CUSTOM_SMART You are using a SMART cable type, so I'm entering SMART test mode mode.type = APCSMART_UPS Setting up the port ... apctest FATAL ERROR in smartsetup.c at line 184 PANIC! Cannot communicate with UPS via serial port. Please make sure the port specified on the DEVICE directive is correct, and that your cable specification on the UPSCABLE directive is correct. apctest error termination completed I'd say APC UPSs are not very generic (smart models need special serial -pin reversed- serial cable). Try with another driver. I think, it is general Kernel + COM-port problem Anything in /var/log/syslog supporting that thinking? :-? Additional data for your review: *** [Nut-upsuser] FSP UPS not listed as supported, but seems to work... at least a little... http://lists.alioth.debian.org/pipermail/nut-upsuser/2010- April/006023.html *** They use UPS with USB port. Yep, and at least seems to be detected. BTW, you can also try asking there, as in NUT list you'll receive updated device support information. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.11.28...@gmail.com
Re: Missing /etc/init.d/functions
On 07/23/2010 11:29 AM, Bruno Costacurta wrote: /etc/init.d/functions is missing. How / where to grab it ? /etc/init.d/functions is a Red Hat developed script for SYSVR4 init on GNU/Linux. It has carried on to other systems that use RPM as their package backend. If you want the Debian-equivalent (where the correct location _should_ be) check out /lib/lsb/init/functions and /etc/default/rcs. Also, don't forget the directory configs under /etc/default/[service-name]. But really, /lib/lsb/init-functions in your direct equivalent to /etc/init.d/functions in the Red Hat world. Probably the best way to have found the file on your own, would be to open an /etc/init.d/[service] file, and notice that most, if not all, are sourcing /lib/lsb/init-functions and /etc/default/rcs. -- . O . O . O . . O O . . . O . . . O . O O O . O . O O . . O O O O . O . . O O O O . O O O signature.asc Description: OpenPGP digital signature
Re: expect does not expect anything
On 07/24/2010 07:35 PM, Dirk wrote: #!/usr/bin/expect -f spawn rsync -r --progress a u...@bla.com:/b expect assword: send password\r expect hostname why does this script stop while rsync is still transferring? (hostname is the name of the host in the prompt) and, yes, it HAS TO BE done using expect... any answer including the word keys will not be helpful Why? -- . O . O . O . . O O . . . O . . . O . O O O . O . O O . . O O O O . O . . O O O O . O O O signature.asc Description: OpenPGP digital signature
Re: Debian cd supporting ext4.
On Mon, Jul 26, 2010 at 18:00 +0700, Sthu Deus wrote: Thank You for Your time and answer, Wolodja: Why don't you just use the images provided by kmuto? They are exactly what you are looking for. I don't get your resistence ... No any resistance absolutely! I think too that it is the thing I'm looking for. Just two important things remain for me w/ the solution: 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer Go to http://db.debian.org/search.cgi and search for First name: Kenshi Last name: Muto Which will provide further information about Kenshi like his IRC name (i.e. kmuto) and his GPG fingerprint. You could also check for his key in the debian-keyring keyring. . Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. 2. I see that I still will need probably, to have /boot at ext3 - the thing I do not want, so I want to know a lot on this before I try to have ext4 again. Using ext4 for /boot is discouraged but you can give it a try. Why do you need /boot to be ext4? Kind regards Wolodja -- .''`. Wolodja Wentlandwentl...@cl.uni-heidelberg.de : :' : `. `'` 4096R/CAF14EFC `- 081C B7CD FF04 2BA9 94EA 36B2 8B7F 7D30 CAF1 4EFC signature.asc Description: Digital signature
Re: Trouble compiling generic kernel
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Monday 26 July 2010, Sven Joachim svenj...@gmx.de was heard to say: You need to install the fakeroot package to build Debian packages as an ordinary user. In Squeeze, dpkg-dev recommends fakeroot for that reason. Well, that solves that question. I thought the fakeroot package was for that extra bit of security, because I had it confused with chroot and that whole jail thing. Got it! I'll try again on my main system (the Lenny one) again today with all the advice given. I think it will work this time! And this may be the first time I didn't get advice from Ron Johnson. :^) Peace, may your aim never waver, Curt- - -- Those who torment us for our own good will torment us without end, for they do so with the approval of their consciences. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBTE14zy9Y35yItIgBAQIMUQf8CYY9pwPWAclrgaICSGmRna/YrNXntV8z 19bcK4Ac/mtK2TXuvwgzRieRS8VpBN7aEmlm5qbn8PvPl6sB/e86gQfCRVISnTym 6yKJmtfp2QbugPMSyhPIJpsoZp4ot7lZd9GPj664gMtwFe5/+2TAfshRjNlahzxb Tz4C5ErAjN7DPtxXLp0hYDDdWi7PFl8a+juL9BgKoaToiiAUF7R15JVL1OnbzTd4 6k2sCbSs4Rndy2f6j6+/boDOvrYflg9iLn8bbWS4oY5CR3F+aunzfmvQRsKPXxlL lXsVAH8M9vSSj83L7n8GxNODOtq/P/4sIjpfl5hvFET38sDC8VTnXw== =KDgy -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201007260800.15737.howl...@priss.com
bind9 problems
Hi! I have setup a local DNS server on my home network (bind9 on debian lenny). The DNS server seems to be working fine when accessed directly (i.e. through nslookup or by setting it as the primary nameserver for the computer manually throught /etc/resolv.conf). So I tried setting it as the primary nameserver for the router (and rebooting the router). However this does not work. On querying the router with nslookup the request times out. Thanks in advance! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d7805.7090...@gmail.com
Re: Debian cd supporting ext4.
Sthu Deus wrote: Thank You for Your time and answer, Wolodja: Why don't you just use the images provided by kmuto? They are exactly what you are looking for. I don't get your resistence ... No any resistance absolutely! I think too that it is the thing I'm looking for. Just two important things remain for me w/ the solution: 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer. You can check at db.debian.org, or look for his PGP key in the debian-keyring package: $ gpg --keyring /usr/share/keyrings/debian-keyring.gpg --list-key muto Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). As an ex-DPL and the guy who puts together the official release Debian CDs, I can vouch for his work. It's been very useful for me in the past. -- Steve McIntyre, Cambridge, UK.st...@einval.com Getting a SCSI chain working is perfectly simple if you remember that there must be exactly three terminations: one on one end of the cable, one on the far end, and the goat, terminated over the SCSI chain with a silver-handled knife whilst burning *black* candles. --- Anthony DeBoer -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e1odm4l-0001q8...@jack.mossbank.org.uk
Re: bind9 problems
Manuel Hofer wrote: Hi, are you maybe using your router as forwarder in your bind9 configuration? regards Thank you for your reply. No, I am using my ISP's nameservers. A little more info. I followed the article at [1]. Minus the stuff about chroot. If it would help I can post the related config files. My router is an Asus WL-AM604g. I have mailed ASUS. [1] http://wizbox.org/archives/343 Regards, Panayiotis -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d7f1a.3080...@gmail.com
Re: bind9 problems
Hi, are you maybe using your router as forwarder in your bind9 configuration? regards On Monday 26 July 2010 13:56:53 Panayiotis Karabassis wrote: Hi! I have setup a local DNS server on my home network (bind9 on debian lenny). The DNS server seems to be working fine when accessed directly (i.e. through nslookup or by setting it as the primary nameserver for the computer manually throught /etc/resolv.conf). So I tried setting it as the primary nameserver for the router (and rebooting the router). However this does not work. On querying the router with nslookup the request times out. Thanks in advance! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201007261435.49171.ho...@esys.at
Re: bind9 problems
Panayiotis Karabassis wrote: I have setup a local DNS server on my home network (bind9 on debian lenny). The DNS server seems to be working fine when accessed directly (i.e. through nslookup or by setting it as the primary nameserver for the computer manually throught /etc/resolv.conf). So I tried setting it as the primary nameserver for the router (and rebooting the router). However this does not work. On querying the router with nslookup the request times out. Perhaps a silly thought, but home routers are usually configured to access an external nameserver not one on the local network. Perhaps it can't reach the nameserver. Two thoughts come to mind: 1. see if you can traceroute the nameserver from somewhere off your local network (make sure to traceroute to port 53) 2. look at your router config - see if its blocking port 53 - if so, try unblocking it (note that this will open your nameserver to the world - so you'd need to lock that down a bit) Miles Fidelman -- In theory, there is no difference between theory and practice. Infnord practice, there is. Yogi Berra -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d8b05.9010...@meetinghouse.net
Re: bind9 problems
On Mon, 26 Jul 2010 14:56:53 +0300, Panayiotis Karabassis wrote: I have setup a local DNS server on my home network (bind9 on debian lenny). The DNS server seems to be working fine when accessed directly (i.e. through nslookup or by setting it as the primary nameserver for the computer manually throught /etc/resolv.conf). So I tried setting it as the primary nameserver for the router (and rebooting the router). I'm not sure what are your goals with this step because the router hasn't to resolve local dns queries, but bind9 :-? However this does not work. On querying the router with nslookup the request times out. How are you exactly querying the router? Did you added the router's local IP into the DNS zone? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.13.20...@gmail.com
Re: bind9 problems
Sorry but I am somewhat of a newbie. Camaleón wrote: I'm not sure what are your goals with this step because the router hasn't to resolve local dns queries, but bind9 :-? Don't connected computers resolve dns queries at the router? My goal is to make all computers on the local network automatically use my bind9 server. How are you exactly querying the router? Did you added the router's local IP into the DNS zone? With 'nslookup mylocaldomain.com 192.168.1.1'. I don't know much about DNS. I attach my zone files. $TTL1h @ IN SOA ns1.panayk.endofinternet.org. hostmaster.panayk.endofinternet.org. ( 01; 1h; 15m; 2w; 1h ) INNS ns1.panayk.endofinternet.org. 10 INPTRpanayk.endofinternet.org. ; ; SOA ; $TTL1h @ IN SOA ns1.panayk.endofinternet.org. hostmaster.panayk.endofinternet.org. ( 01 ; Serial number 1h ; Slave refresh 15m ; Slave retry 2w ; Slave expire 1h ; Negative Cache TTL ) ; ; NS RECORDS ; @ IN NS ns1.panayk.endofinternet.org. @ IN NS ns2.panayk.endofinternet.org. ; ; MX RECORD ; @ IN MX 10 mx.panayk.endofinternet.org. ; ; A RECORDS ; @ IN A 192.168.1.10 www IN A 192.168.1.10 ns1 IN A 192.168.1.10 ns2 IN A 192.168.1.10 mx IN A 192.168.1.10 ;desktop IN A 192.168.1.21 ;laptop IN A 192.168.1.22 router IN A 192.168.1.1
Re: bind9 problems
Miles Fidelman wrote: Perhaps a silly thought, but home routers are usually configured to access an external nameserver not one on the local network. Perhaps it can't reach the nameserver. I was thinking the same thing. Two thoughts come to mind: 1. see if you can traceroute the nameserver from somewhere off your local network (make sure to traceroute to port 53) The nameserver is not visible to the external world. Should I forward the port? 2. look at your router config - see if its blocking port 53 - if so, try unblocking it (note that this will open your nameserver to the world - so you'd need to lock that down a bit) I don't think it is blocking it. Regards -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d8fa7.60...@gmail.com
Re: bind9 problems
Panayiotis Karabassis wrote: Two thoughts come to mind: 1. see if you can traceroute the nameserver from somewhere off your local network (make sure to traceroute to port 53) The nameserver is not visible to the external world. Should I forward the port? 2. look at your router config - see if its blocking port 53 - if so, try unblocking it (note that this will open your nameserver to the world - so you'd need to lock that down a bit) I don't think it is blocking it. These two statements are contradictory. If the nameserver is not visible to the external world, then its precisely because your router is blocking the port. Try forwarding the port and see what happens. If it works, then you should immediately figure out how to lock things down so only your local machines can access the port. -- In theory, there is no difference between theory and practice. Infnord practice, there is. Yogi Berra -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d9555.8090...@meetinghouse.net
Re: unwanted repeated messages on Lenny laptop
Celejar wrote: On Sun, 25 Jul 2010 17:38:27 +0100 Lisi lisi.re...@gmail.com wrote: On Sunday 25 July 2010 16:01:15 hugo vanwoerkom wrote: ... I am getting all of Hugo's messages twice. ?? Lisi I, too. I think it is my icedove, I'm having trouble posting. Sorry Hugo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/i2k56u$8o...@dough.gmane.org
Re: bind9 problems
On Mon, 26 Jul 2010 16:35:08 +0300, Panayiotis Karabassis wrote: Sorry but I am somewhat of a newbie. Camaleón wrote: I'm not sure what are your goals with this step because the router hasn't to resolve local dns queries, but bind9 :-? Don't connected computers resolve dns queries at the router? They resolve at bind9's side (local queries and remote queries) :-) My goal is to make all computers on the local network automatically use my bind9 server. Your computers, yes, but also the router? That was my doubt :-? How are you exactly querying the router? Did you added the router's local IP into the DNS zone? With 'nslookup mylocaldomain.com 192.168.1.1'. Mmm, as per the zone settings you are using, you should just query dig router or nslookup router. I don't know much about DNS. I attach my zone files. $TTL1h @ IN SOA ns1.panayk.endofinternet.org. ^ That domain name already exists in Internet (it's reachable). I suppose it belongs to you, right? :-? (...) router IN A 192.168.1.1 I think that should be enough. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.26.14.16...@gmail.com
lighttpd: howto move php error messages from error.log to the browser again?
Hello, I want the PHP error messages (PHP Notice) to be shown in the browser again. And not in the error.log file. Why? Because. Lighttpd: current version that comes with Debian/Squeeze (x86) Thanks Dirk -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d9aff.70...@gmx.net
lighttpd: howto move php error messages from error.log to the browser again?
Hello, I want the PHP error messages (PHP Notice) to be shown in the browser again. And not in the error.log file. Why? Because. Lighttpd: current version that comes with Debian/Squeeze (x86) Thanks Dirk Reply -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d9792.7000...@gmx.net
lighttpd: howto move php error messages from error.log to the browser again?
Hello, I want the PHP error messages (PHP Notice) to be shown in the browser again. And not in the error.log file. Why? Because. Lighttpd: current version that comes with Debian/Squeeze (x86) Thanks Dirk -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d97ac.7030...@gmx.net
Re: lighttpd: howto move php error messages from error.log to the browser again?
Dirk wrote: Hello, I want the PHP error messages (PHP Notice) to be shown in the browser again. And not in the error.log file. Why? Because. Lighttpd: current version that comes with Debian/Squeeze (x86) Thanks Dirk you have to set display_errors in php.ini to display_errors = on -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4d9e98.6090...@gmx.net
Re: [OT] Debian cd supporting ext4.
Dne, 26. 07. 2010 14:08:50 je Wolodja Wentland napisal(a): 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer Go to http://db.debian.org/search.cgi and search for First name: Kenshi Last name: Muto Which will provide further information about Kenshi like his IRC name (i.e. kmuto) and his GPG fingerprint. You could also check for his key in the debian-keyring keyring. . Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. Given that there is at least one known *wife-murderer* among filesystems developers and that, according to lore, there have been quite some *weed-smokers* among the early GNU developers, isn't all this overscrutinizing of poor Kenshi Muto starting to feel a bit disproportionate? Just my 2 offtopic cents :) -- Regards, Klistvud Certifiable Loonix User #481801 http://bufferoverflow.tiddlyspot.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1280155609.2879...@compax
Re: [OT] Debian cd supporting ext4.
On Mon, Jul 26, 2010 at 10:46 AM, Klistvud quotati...@aliceadsl.fr wrote: Dne, 26. 07. 2010 14:08:50 je Wolodja Wentland napisal(a): 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer Go to http://db.debian.org/search.cgi and search for First name: Kenshi Last name: Muto Which will provide further information about Kenshi like his IRC name (i.e. kmuto) and his GPG fingerprint. You could also check for his key in the debian-keyring keyring. . Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. Given that there is at least one known *wife-murderer* among filesystems developers and that, according to lore, there have been quite some *weed-smokers* among the early GNU developers, isn't all this overscrutinizing of poor Kenshi Muto starting to feel a bit disproportionate? Just my 2 offtopic cents :) +1 Totally OTT. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=ctxvzwrnp_g-xulgm6d-6p3brufe-5ewsv...@mail.gmail.com
Re: [OT] Debian cd supporting ext4.
On Mon, Jul 26, 2010 at 16:46 +0200, Klistvud wrote: Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. Given that there is at least one known *wife-murderer* among filesystems developers and that, according to lore, there have been quite some *weed-smokers* among the early GNU developers, isn't all this overscrutinizing of poor Kenshi Muto starting to feel a bit disproportionate? I wholeheartily agree (hence my should in the laste sentence). I am deeply grateful for everything Kenshi has done for the Debian community and don't think we have to delve any deeper into this. Kind regards Wolodja -- .''`. Wolodja Wentlandwentl...@cl.uni-heidelberg.de : :' : `. `'` 4096R/CAF14EFC `- 081C B7CD FF04 2BA9 94EA 36B2 8B7F 7D30 CAF1 4EFC signature.asc Description: Digital signature
Re: Trouble compiling generic kernel
On 2010-07-26 14:00 +0200, Curt Howland wrote: On Monday 26 July 2010, Sven Joachim svenj...@gmx.de was heard to say: You need to install the fakeroot package to build Debian packages as an ordinary user. In Squeeze, dpkg-dev recommends fakeroot for that reason. Well, that solves that question. I thought the fakeroot package was for that extra bit of security, because I had it confused with chroot and that whole jail thing. Got it! I'll try again on my main system (the Lenny one) again today with all the advice given. I think it will work this time! And this may be the first time I didn't get advice from Ron Johnson. :^) There's another advice I need to give: while dpkg-dev will automatically use fakeroot when necessary, make-kpkg currently does not unless you set ROOT_CMD=fakeroot in the environment. You can put this setting into ~/.kernel-pkg.conf (I have it there for ages, and forgot about it). See kernel-pkg.conf(5) for other settings you may want to put into ~/.kernel-pkg.conf. Sven -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87mxtel1xm@turtle.gmx.de
Re: Trouble compiling generic kernel
On 07/26/2010 11:04 AM, Sven Joachim wrote: There's another advice I need to give: while dpkg-dev will automatically use fakeroot when necessary, make-kpkg currently does not unless you set ROOT_CMD=fakeroot in the environment. You can put this setting into ~/.kernel-pkg.conf (I have it there for ages, and forgot about it). One can also add a command line option, --rootcmd=fakeroot or one can simply run the whole 'make-kpkg' command as the argument to fakeroot: fakeroot make-kpkg [...] Dave W. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c4da6ee.8010...@sbcglobal.net
Re: [OT] Debian cd supporting ext4.
On Monday 26 July 2010 15:43:55 Tom H wrote: On Mon, Jul 26, 2010 at 10:46 AM, Klistvud quotati...@aliceadsl.fr wrote: Dne, 26. 07. 2010 14:08:50 je Wolodja Wentland napisal(a): 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer Go to http://db.debian.org/search.cgi and search for First name: Kenshi Last name: Muto Which will provide further information about Kenshi like his IRC name (i.e. kmuto) and his GPG fingerprint. You could also check for his key in the debian-keyring keyring. . Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. Given that there is at least one known *wife-murderer* among filesystems developers and that, according to lore, there have been quite some *weed-smokers* among the early GNU developers, isn't all this overscrutinizing of poor Kenshi Muto starting to feel a bit disproportionate? Just my 2 offtopic cents :) +1 Totally OTT. +1 other. Sthu Deus has several options which I thought that I had spelt out. He doesn't like any of the available options. Tough. This is becoming ridiculous IMHO. He can *use* what's available or he can *not use* what's available. There is no alternative to that, unless he wants to write his own distro. He seems to want the very latest in a very stable distro. If you want cutting edge, you use Sid, Sidux, Ubuntu, Fedora. If you want rock solid you use Lenny. You pays your money (or in this case not) and you takes your choice. As has already been pointed out, you can't have your cake and eat it. If there were a moderator, I would suggest that this thread be terminated. There is nowhere else for it to go. Kenshi Muto is doing us a great service, for which he receives, so far as I know, no remuneration. He at least deserves our gratitude and respect. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201007261617.54823.lisi.re...@gmail.com
Re: [OT] Debian cd supporting ext4.
From: Lisi lisi.re...@gmail.com To: debian-user@lists.debian.org Date: Today 16:17:54 On Monday 26 July 2010 15:43:55 Tom H wrote: On Mon, Jul 26, 2010 at 10:46 AM, Klistvud quotati...@aliceadsl.fr wrote: Dne, 26. 07. 2010 14:08:50 je Wolodja Wentland napisal(a): 1. If it is trustable/secure as the stable Debian (for for now all I have is just phrases like believe me w/ no any farther approval from the Debian project). In other words and including of all I have on that item is this: I can not make strong relationship of the author's work w/ the Debian project - I have been told he is one of the developers but, searching for any info on him at the debian.org or a list of developers - was unsuccessful for me. So, I even can not check the fact as if he is still the Debian developer Go to http://db.debian.org/search.cgi and search for First name: Kenshi Last name: Muto Which will provide further information about Kenshi like his IRC name (i.e. kmuto) and his GPG fingerprint. You could also check for his key in the debian-keyring keyring. . Also, I do not know the Debian project developers opinion|accreditation on his this work (the CDs he makes). Google for Kenshi Muto Debian and Kenshi Muto site:lists.debian.org and you should get enough information to answer that question. I am not aware of any official Debian initiated poll that answers the question What do you think of kmuto's work? and doubt that something like this will/should ever happen. Given that there is at least one known *wife-murderer* among filesystems developers and that, according to lore, there have been quite some *weed-smokers* among the early GNU developers, isn't all this overscrutinizing of poor Kenshi Muto starting to feel a bit disproportionate? Just my 2 offtopic cents :) +1 Totally OTT. +1 other. Sthu Deus has several options which I thought that I had spelt out. He doesn't like any of the available options. Tough. This is becoming ridiculous IMHO. He can *use* what's available or he can *not use* what's available. There is no alternative to that, unless he wants to write his own distro. He seems to want the very latest in a very stable distro. If you want cutting edge, you use Sid, Sidux, Ubuntu, Fedora. If you want rock solid you use Lenny. You pays your money (or in this case not) and you takes your choice. As has already been pointed out, you can't have your cake and eat it. If there were a moderator, I would suggest that this thread be terminated. There is nowhere else for it to go. Kenshi Muto is doing us a great service, for which he receives, so far as I know, no remuneration. He at least deserves our gratitude and respect. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201007261619.29559.lisi.re...@gmail.com
