Re: Umlaute in Dateinamen
On Mon, 05 Apr 2004 17:25:56 +0200, Christoph Wegscheider wrote: Andre Kalus wrote: Ich dachte, dies hätte etwas mit dem Native Language Support im Kernel zu tun, aber beim mounten von ext2/reiserfs existieren keine Optionen, welcher Zeichensatz zu verwenden ist... ,[ man mount ] | iocharset=value | Character set to use for converting between 8 bit characters and | 16 bit Unicode characters. The default is iso8859-1. Long file- | names are stored on disk in Unicode format. ` Steht zwar bei den fat mount optionen aber zumindest JFS habe ich damit auch schon Umlaute beigebracht. Einen Versuch ist es also sicher Wert. Welchen Charset hast du denn eingetragen? Der Default iso8859-1 sollte doch bereits Umlaute beherrschen? Vielen Dank Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Umlaute in Dateinamen
On Mon, 05 Apr 2004 17:12:51 +0200, Andre Kalus wrote: Hallo, ich habe daheim einen Fileserver, auf den mehrere Linux-Clients via NFS und ein Windows-Client via Samba zugreifen sollen. Der Server verwendet einen Standard-Woody-Kernel, die Clients haben teilweise selbstgebaute Kernel. Wie schaffe ich es, dass die Umlaute auf allen Systemen (alle Clients, am besten auch auf dem Server, wenn ich via SSH arbeite) korrekt dargestellt werden? Ich habe noch einmal etwas getestet: 1. Auf der Kommandozeile (ETerm, ATerm) kann ich gar keine Umlaute eintippen. 2. Wenn ich mit einem Programm (z.B. dem Dateimanager Endeavour) eine Datei mit Umlauten erstelle, werden auf der Kommandozeile bei einem ls statt der Umlaute ? angezeigt - interessanterweise zeigt die automatische Ergänzung (Tab) den Dateinamen korrekt mit Umlauten an. Spielen in diesem Zusammenhang die LOCALES eine Rolle? Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Umlaute in Dateinamen
Hallo, ich habe daheim einen Fileserver, auf den mehrere Linux-Clients via NFS und ein Windows-Client via Samba zugreifen sollen. Der Server verwendet einen Standard-Woody-Kernel, die Clients haben teilweise selbstgebaute Kernel. Wie schaffe ich es, dass die Umlaute auf allen Systemen (alle Clients, am besten auch auf dem Server, wenn ich via SSH arbeite) korrekt dargestellt werden? Ich dachte, dies hätte etwas mit dem Native Language Support im Kernel zu tun, aber beim mounten von ext2/reiserfs existieren keine Optionen, welcher Zeichensatz zu verwenden ist... Bei Samba kann man Parammeter angeben, welcher Zeichensatz zu exportieren ist, damit sollte man vermutlich dem Windows-Client zu einer korrekten Darstellung verhelfen können?!? Gerne auch Verweise auf Webseiten oder relevante Manpages, habe nichts Gutes zu dem Thema gefunden. Vielen Dank Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: increase in memory usage
On Thu, 06 Nov 2003 09:38:58 +0100, Kordula Martin wrote: Hi, I'm somewhat of a newbie, and have had Woody installed for about 2 months now. I've been noticing something that raises a few questions - right after (re)booting my machine, I'll use 'top' to check the memory usage which is usaually something like 56xxx KB used, and then after 1 or 2 days I use 'top' again to check and the memory usage has jumped up to about 230xxx KB used. This is without making any changes to the running system. I'm using the machine as a Web, FTP and email server, also Fetchmail running as a daemon, but there is not yet any real outside activity going on, and notice, I said no changes to the running system (from my side). What can be (gradually) consuming all of this memory? Can I expect this to increase to eventually use all of my 384 MB of RAM? Is there something I can do to periodically free, or refresh, my (un-used) RAM? All insight into this issue will be greatly appreciated! Hi, linux automatically uses your ram to cache hard disk accesses. You the command free to display information about how your memore is used - to get the free memory add the values cache and buffers to your unused memory. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Looking for a good digital image manager
On Wed, 05 Nov 2003 22:14:51 -0500, Trey Sizemore wrote: I'm looking for something like PixiePlus for categorizing and editing digital photos. PixiePlus is pretty good, but I'm looking at alternatives. I've also tried GQview. So what are the favorites out there? Thanks. GImageView is very good - it shows thumbnails of your pictures and allows you to create sets of thumbnails you want to see in one page. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: mozilla nimmt keine eingaben
On Tue, 04 Nov 2003 22:11:35 +0100, Michael Rother wrote: Moin, ich hab schon laenger das problem, dass mozilla (zur zeit benutz ich 1.5) ab und an mal keine Eingaben mehr nimmt. Manchmal hilft warten, manchmal oeffne ich einfach ein neues fenster und schliesse das alte. Weiss da einer Abhilfe? Hallo, ich hatte mal irgendwo gelesen, dass das mit dem automatischen Ergänzen von der Adresszeile zusammenhängt. Habe diese jetzt bei mir abgeschaltet (manchmal spinnt Mozilla aber immer noch:-(( ) Ich glaube, es hilft auch, einen neuen Tab zu erstellen und wieder zu schließen... Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Java-Plugin
On Sat, 01 Nov 2003 15:24:31 +0100, Soeren D. Schulze wrote: Michael Domann wrote: Hallo Sören, libjavaplugin_oji.so - path/zu/j2re1.4.2_02/plugin/i386/ns610-gcc32/libjavaplugin_oji.so ^ so muß der Link richtig gesetzt sein, ich glaube das liegt daran das Mozilla mit gcc3.3 übersetzt wurde, und das andere plugin mit gcc2.xx. Ja, so ist das beim originalen SUN Java. Das hier ist aber Blackdown. Sören ... und Blackdown hat zur Zeit keine GCC 3.2-Version- Das Plugin wird nicht funktionieren. Du kannst entweder - das Sun-Plugin verwenden (kein fertiges Debian-Paket, kannst aber Dummy-Pakete für Dependencies bauen) - eine (alte) Browser-Version nehmen, die noch mit GCC 2.95 kompiliert ist. Hatte das gleiche Problem, nutze mittlerweile Suns JDK. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Installationsproblem Debian 3
On Thu, 30 Oct 2003 17:04:27 +0100, Dirk Schiefke wrote: Am Thu, 30 Oct 2003 09:30:12 +0100 hat Andre Kalus [EMAIL PROTECTED] geschrieben: Zu deinem Problem: siehe meine Antwort in linux.debian.user. seltsamerweise habe ich deine Antwort in debian.user nicht erhalten, aus welchen Gründen auch immer. Hallo, hier noch mal mein posting aus linux.debian.user: Habe aber mit der Installation eine kleine technische Schwierigkeit. [...] Bei Deb3 erhalte ich leider ne Kernel Panik sobald ich das System von dort booten möchte (Min Install) Platten - Konfiguration IDE040GB (XP) IDE0' 40GB (XP) IDE1 CDRW IDE1' DVD IDE2 20.5GB (XP,LIN) /home IDE2' IDE3 8.4GB (LIN) /, /usr, /opt, Swap IDE3' unter Suse liess sich das System mit folgender Konfig (ext2) booten: Platten sind jetzt als ext3 eingerichtet. # LILO configuration file # Start LILO global Section [...] append=hdc=ide-scsi hdd=ide-scsi [...] Wie du schreibst, ist IDE3 (hdd) eine Platte. Die Option ide-scsi ist jedoch im 2.4 er kernel nur für CD-Brenner erforderlich. Nimm mal aus der Append-Zeile den Teil hdd=ide-scsi raus, das könnte deine Kernel-Panic verursachen. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Installationsproblem Debian 3
On Thu, 30 Oct 2003 17:04:27 +0100, Dirk Schiefke wrote: Am Thu, 30 Oct 2003 09:30:12 +0100 hat Andre Kalus [EMAIL PROTECTED] geschrieben: Zu deinem Problem: siehe meine Antwort in linux.debian.user. seltsamerweise habe ich deine Antwort in debian.user nicht erhalten, aus welchen Gründen auch immer. Hallo, hier noch mal mein posting aus linux.debian.user: Habe aber mit der Installation eine kleine technische Schwierigkeit. [...] Bei Deb3 erhalte ich leider ne Kernel Panik sobald ich das System von dort booten möchte (Min Install) Platten - Konfiguration IDE040GB (XP) IDE0' 40GB (XP) IDE1 CDRW IDE1' DVD IDE2 20.5GB (XP,LIN) /home IDE2' IDE3 8.4GB (LIN) /, /usr, /opt, Swap IDE3' unter Suse liess sich das System mit folgender Konfig (ext2) booten: Platten sind jetzt als ext3 eingerichtet. # LILO configuration file # Start LILO global Section [...] append=hdc=ide-scsi hdd=ide-scsi [...] Wie du schreibst, ist IDE3 (hdd) eine Platte. Die Option ide-scsi ist jedoch im 2.4 er kernel nur für CD-Brenner erforderlich. Nimm mal aus der Append-Zeile den Teil hdd=ide-scsi raus, das könnte deine Kernel-Panic verursachen. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: kernel-2.6.0-test9 / nfs warning
On Sat, 01 Nov 2003 20:07:03 +0100, Elimar Riesebieter wrote: Hi all, just a new qustion for using 2.6.0-test9: dmesg shows: nfs warning: mount version older than kernel util-linux-2.12 is installed and recompiled witin 2.6.0 Any idea? Has been this way since test0. A new version of mount should fix it (I don't have one, too) but this warning does not affect system usability. Learn to ignore it... Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Installationsproblem Debian 3
On Thu, 30 Oct 2003 02:54:59 +0100, Dirk Schiefke wrote: Hi, hab mich nach langer Zeit von meinem bisher gewohnten Suse Linux (ja würg, ich weiss) getrennt und bin letztendlich zu Debian gewechselt. Hallo, bitte nicht in mehrere Gruppen posten (sogenanntes Crossposting - damit erreichst du auch nicht mehr Leute: viele, die linux.debian.user.german lesen, lesen auch linux.debian.user). Zu deinem Problem: siehe meine Antwort in linux.debian.user. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Woody 3.0 und ATI Technologies Inc Rage 128 Pro TF
On Thu, 30 Oct 2003 00:15:00 +0100, helmut wrote: Sehr geehrter Support leider kann ich den X nicht erfolgreich starten, weil die Grafikkarte fehlt 01:00:0 VGA ... ATI Technologies Inc Rage 128 Pro TF Wird die Rage 128 Pro nicht vom ati-Treiber von XFree86 unterstützt? Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: isdn - no route ?
On Wed, 29 Oct 2003 22:47:18 +0100, Tobias Ceglarek wrote: hallo ! ich habe einen rechner mit einer pci-isdn-karte (fritz) und habe, um diese zu nutzen, das hisax-modul geladen (mit speziellen angaben für den io und den port -- unter suse hat das so immer funktioniert) und die isdnutils installiert (und während der installation konfiguriert). Da es eine PCI-Karte ist, brauchst du keine Parameter für io und port - sollte aber egal sein. Wenn ich jetzt versuche, mich mit isdnctrl dial ippp0 einzuwählen, bekomme ich folgende Meldungen: --/var/log/daemon.log Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 * tei 95 calling ? with ? BEARER: Unrestricted digital information, CCITT standardized coding Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 * tei 95 calling ? with ? 64 kbit/s, Circuit mode Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 * tei 95 calling 0193885 with +49 541/1814694, Osnabrück RING (Data) Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 * tei 95 calling 0193885 with +49 541/1814694, Osnabrück CHANNEL: BRI, B1 needed Bis hierhin ist das OK. Bin zuerst über das B1 needed gestolpert, habe ich aber auch. Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 tei 95 calling 0193885 with +49 541/1814694, Osnabrück No route to destination (Public network serving local user) Oct 29 22:39:03 fritz isdnlog: Oct 29 22:39:03 tei 95 calling 0193885 with +49 541/1814694, Osnabrück HANGUP No route to destination (Public network serving local user) --- Hier verbindet er sich bei mir. Schau noch mal in /var/log/isdn/isdnlog rein, vielleicht steht da noch etwas Interessantes. Ideen: - Fehler in der Netzwerkkonfiguration - passt aber eigentlich die ISDN-Meldung nicht dazu. Poste mal den output von route (-n). - Fehler beim Verbindungsaufbau: Hast du vielleicht bei deinem Telefonanschluss die 019x-Nummern zum Dialerschutz gesperrt? Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Installationsproblem Deb 3
On Wed, 29 Oct 2003 16:44:30 +0100, Dirk Schiefke wrote: Hi, hab mich nach langer Zeit von meinem bisher gewohnten Suse Linux (ja würg, ich weiss) getrennt und bin letztendlich zu Debian gewechselt. Hallo, dies hier ist eine englischsprachige Newsgroup. Wenn du lieber auf deutsch posten willst, schreibe das nächste mal bitte in linux.debian.user.german. Habe aber mit der Installation eine kleine technische Schwierigkeit. [...] Bei Deb3 erhalte ich leider ne Kernel Panik sobald ich das System von dort booten möchte (Min Install) Platten - Konfiguration IDE040GB (XP) IDE0' 40GB (XP) IDE1 CDRW IDE1' DVD IDE2 20.5GB (XP,LIN) /home IDE2' IDE3 8.4GB (LIN) /, /usr, /opt, Swap IDE3' unter Suse liess sich das System mit folgender Konfig (ext2) booten: Platten sind jetzt als ext3 eingerichtet. # LILO configuration file # Start LILO global Section [...] append=hdc=ide-scsi hdd=ide-scsi [...] Wie du schreibst, ist IDE3 (hdd) eine Platte. Die Option ide-scsi ist jedoch im 2.4 er kernel nur für CD-Brenner erforderlich. Nimm mal aus der Append-Zeile den Teil hdd=ide-scsi raus, das könnte deine Kernel-Panic verursachen. Viele Grüße Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Fail to telnet Debian from Windows
On Wed, 29 Oct 2003 11:05:26 +0100, =?iso-8859-1?B?RW1pbCBI5Gdlcmx1bmQ= ?= wrote: Thanks, I'll remove telnetd. Enough just to apt-get install 'ssh'? It should already be installed because it is contained in standard installation. Type which ssh if you get /usr/bin/ssh then ssh client and server (same package) are installed. How to get sshd up and running? During installation you were asked if ssh server should be started. If you said no it wrote a file /etc/ssh/ sshd_not_to_be_run. If you remove this file ssh server should start during bootup. Modify hosts.allow? No. hosts.allow and hosts.deny are used by the inetd server who can pass requests to other servers (e.g. telnetd). sshd is running standalone, so you do not need hosts.{allow|deny}. If you want to restrict access edit /etc/ssh/sshd_config and add/modify the parameter ListenAddress and set it to the IP of your ethernet card. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: setting permissions
On Thu, 30 Oct 2003 23:43:15 +, john wrote: need to know what command i can use so i can write to all files and folders under any folder which is shared on a network The command is called chmod. To use it you have to understand unix file permissions: Every file has an owner and a group. The file permissions contains three parts: user (owner), group (members of the group) and other (everybody else). If you do a ls -l you will see perhaps the following permissions for a file: rwxrwxr-x The first three are the permissions for the user (he may read, write and execute), the second three are for group (same permissions), the last triple for other (may read and execute but not write). You use chmod like this: chmod o+w file That means that other (last triple) get write permissions. Or you might say chmod u+rwx file so user gets all permissions (he normally already has) and so on... chmod (u|g|o)+(r|w|x) file. To change permissions recursively add the -R parameter. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Configure PnP Card before Kernel loads modules
On Thu, 30 Oct 2003 11:19:40 +0100, Andreas Bohnert wrote: thanks andreas, I will try that. stupid question: is just a random name? No, it is not. It has to be that way so any program that wants to access the sound card (via sound-slot-0) is poited to the correct driver. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: chmod wirkungslos
On Tue, 28 Oct 2003 23:33:56 +0100, Son-Gokuu wrote: Hallo!! Ich habe vor kurzen meine Festplatte neu partitioniert! Ich habe auf der einen Platte mein Filesystem und auf einer zweiten angehängten Platte habe ich meine ganzen restlichen Daten (zB Musik etc.) Auf dieser Platte wollte ich heute per chmod die Rechte ändern (natürlich als root): chmod -v 777 Musik Modus von Musik nach 0777 (rwxrwxrwx) geändert [...] woran kann das liegen? muss ja irgendwie an der festplatte liegen, denn auf meiner anderen, auf der debian installiert ist, funktioniert ja alles! filesystem ist auch nichts ungewöhnliches, fat32... bin momentan also ratlos! Wie alle anderen schon geschrieben haben: Für FAT32 musst du die Rechte beim Mounten festlegen, z.B. so (Ausschnitt aus /etc/fstab): /dev/hda5 /data vfatuid=1000,gid=100,umask=002 00 Hier werden folgende Optionen gesetzt: Der Owner der Dateien soll der User 1000 sein, die Gruppe 100 (user) und die nicht gesetzten Flags ist das WRITE-Flag fpr OTHER, was zu den Rechten rwxrwxr-x führt. Willst du rwxrwxrwx als Rechte, verwendest du umask=000. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: mehrere IP-Adressen an eth0 verwenden
On Tue, 28 Oct 2003 12:26:57 +0100, Jens Lehnen wrote: Hallo Zusammen, mein Notbook (Knoppix 3.2) verwende ich sowohl daheim als auch an der Uni, deshalb benoetige ich fuer die Netzwerkkarte zwei IP-Adressen. [...] Hat meine Konfiguration noch Fehler oder ist dieses Vorgehen normal? Hallo, damit deine Konfiguration funktioniert, musst du wahrscheinlich die Default-Route mittels route add default [eth0 | eth0:1] setzen. Allerdings hast du dann zwei IP-Adressen auf deiner Netzwerkkarte, von denen du eine jeweils nicht brauchst. Insbesondere wenn du neben Uni und Daheim noch weitere Konigurationen einrichtest, wird es irgendwann unübersichtlich. Ich mache folgendes (funktioniert auch bei vielen Konfigurationen): Ich habe mir ein Skript geschrieben, was bereits im von rc.sysinit noch vor dem Setzen des Hostnamens (und dem Starten des Netzwerks) ausgeführt wird. In diesem frage ich nach, welche Netzwerkkonfiguration geladen werden soll, und ändere in Abhängigkeit von der Auswahl entsprechende Dateien (etc/hostname, /etc/resolv.conf und /etc/network/interfaces). Das System liest dann beim weiteren Starten die Dateien und startet das Netzwerk ganz normal mit den Einstellungen aus /etc/network/interfaces. Bei Interesse kann ich das Skript mal posten. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: mehrere IP-Adressen an eth0 verwenden
On Tue, 28 Oct 2003 15:16:30 +0100, Michael Ott wrote: Hallo Andre! Ich mache folgendes (funktioniert auch bei vielen Konfigurationen): Ich habe mir ein Skript geschrieben, was bereits im von rc.sysinit noch vor dem Setzen des Hostnamens (und dem Starten des Netzwerks) ausgeführt wird. In diesem frage ich nach, welche Netzwerkkonfiguration geladen werden soll, und ändere in Abhängigkeit von der Auswahl entsprechende Dateien (etc/hostname, /etc/resolv.conf und /etc/network/interfaces). Das System liest dann beim weiteren Starten die Dateien und startet das Netzwerk ganz normal mit den Einstellungen aus /etc/network/interfaces. Bei Interesse kann ich das Skript mal posten. Ich habe Interesse OK, dann hier also das Skript (/etc/init.d/netselect). Es war so ziemlich mein erstes Skript, daher vielleicht manchmal etwas umständlich. Ich kommentiere immer mal etwas zusätzlich... (#COMMENT) - Start /etc/init.d/netselect #!/bin/bash # Change network profiles at startup # @author: Andre Kalus [EMAIL PROTECTED] # @date: 2003-03-28 #COMMENT: in PROFILE_DIR liegen die Dateien, die die Netzwerkprofile # enthalten, die zwei weiteren Dirs sind Debian-Standard, dann die Anzahl # der allgemeinen (z.B. Hostname) und der interface-Spezifischen (bei # mehreren Netzwerkkarten) Einträge (z.B. IP-Adresse) PROFILE_DIR=/etc/net.profiles NETWORK_CONF_DIR=/etc/sysconfig INIT_DIR=/etc/init.d ENTRIES_GENERAL=5 ENTRIES_PER_IF=7 #COMMENT: Die nächsten drei sind Hilfesfunktionen, die im Skript # verwendet werden # # getValue: $DATA contains lines containing # var=value; this function assigns value to $VALUE # getValue() { RELLINE=`echo $DATA | grep -i $1=` VALUE=`echo $RELLINE | sed 's/[[:print:]]*=//'` } # # printValue: Writes pairs of var and value to # $ACT_FIle. A separator between var and value can # be specified as optional third argument; if not # specified, it's empty # printValue() { getValue $1 if [ -n $VALUE ]; then echo $2$3$VALUE $ACT_FILE fi } # # getPromptValue: read /proc/cmdline and write the # value of netprofile into the var PROMPTVALUE # getPromptValue() { flag=netprofile i=1 expr=`cat /proc/cmdline | awk '{print $'${i}'}'` while [ -n $expr ] do if [ `echo $expr | grep $flag` ] then PROMPTVALUE=`echo $expr | sed s/$flag=//` fi let i += 1 expr=`cat /proc/cmdline | awk '{print $'${i}'}'` done } # # Begin script: Get profile name set as kernel option. # If none, ask for profile, then set symlink to # selected profile and write its values to default # files. # #COMMENT: Prüfe, ob Netzwerk-Konfiguration in der Boot-Zeile bereits # angegeben (für häufig benutzte habe ich einen eigenen Eintrag im # Grub-Menü cd $PROFILE_DIR getPromptValue if [ -z $PROMPTVALUE ]; then #COMMENT: Wenn kein Profil in boot-Zeile angegeben, zeige Auswahl # Print selection menue: get available profiles echo -e \e[32m Network selection -\e[0m #COMMENT: Alle Profil-Definitionen fangen mit net an (z.B. net.Home); # angezeigt wird nur der Teil hinter net (z.B. Home) profiles=(`ls net.* | sed 's/net.//'`) count=1 [EMAIL PROTECTED] while [ $count -le $num_profiles ]; do profile=${profiles[$count-1]} echo -n $count: echo $profile | sed 's/_/ /g' let count += 1 done echo -e \e[32m-- e for exit (keep old settings) -- echo -e \e[0m # Read until valid input read -s -n1 sel_num while [ $sel_num \ 1 -o $sel_num \ $num_profiles ]; do if [ $sel_num = e ]; then echo Keeping old settings exit 0 fi echo Wrong input read -s -n1 sel_num done echo NEW_PROFILE=`echo ${profiles[$sel_num-1]} | sed 's/ /_/g'` else NEW_PROFILE=$PROMPTVALUE fi echo Using profile $NEW_PROFILE PROFILE_FILE=`echo net.$NEW_PROFILE` # Write general data DATA=`head -n $ENTRIES_GENERAL $PROFILE_FILE` ACT_FILE=/etc/hostname rm -f $ACT_FILE printValue HOSTNAME ACT_FILE=/etc/resolv.conf rm -f $ACT_FILE printValue NAMESERVER nameserver printValue DOMAIN domain # Write interface-specific data per interface IFCOUNT=`grep --count IF_NAME $PROFILE_FILE` IFLIST=(`grep IF_NAME $PROFILE_FILE`) i=0 ACT_FILE=/etc/network/interfaces echo auto lo iface lo inet loopback $ACT_FILE while [ $i -lt $IFCOUNT ]; do echo $ACT_FILE DATA=`grep -A $ENTRIES_PER_IF ${IFLIST[i]} $PROFILE_FILE` getValue IF_ONBOOT if [ $VALUE = yes ]; then printValue IF_NAME auto fi getValue IF_NAME printValue IF_TYPE iface $VALUE inet printValue IF_IP address printValue IF_NETMASKnetmask printValue IF_NETWORKnetwork
Re: mehrere IP-Adressen an eth0 verwenden
On Tue, 28 Oct 2003 17:34:49 +0100, Andre Kalus wrote: On Tue, 28 Oct 2003 15:16:30 +0100, Michael Ott wrote: Hallo Andre! Ich mache folgendes (funktioniert auch bei vielen Konfigurationen): Ich habe mir ein Skript geschrieben, was bereits im von rc.sysinit noch vor dem Setzen des Hostnamens (und dem Starten des Netzwerks) ausgeführt wird. In diesem frage ich nach, welche Netzwerkkonfiguration geladen werden soll, und ändere in Abhängigkeit von der Auswahl entsprechende Dateien (etc/hostname, /etc/resolv.conf und /etc/network/interfaces). Das System liest dann beim weiteren Starten die Dateien und startet das Netzwerk ganz normal mit den Einstellungen aus /etc/network/interfaces. Bei Interesse kann ich das Skript mal posten. Ich habe Interesse [...] Das war jetzt relativ viel. Ich stelle das Skript mal auf meine Homepage (http://home.pages.at/andre-kalus) So, ich habe das ganze Online: http://home.pages.at/andre-kalus/comp/scripts/netselect_de.php Dort ist das ganze vielleicht etwas übersichtlicher erklärt, und man kann es direkt dowloaden. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: nfs problem
On Mon, 27 Oct 2003 16:01:06 -0500, Vivek Kumar wrote: Hi, I am trying to mount a directory as nfs filesystem from other machine. I am getting RPC error on other machine and it says (Host linux box) is not responding. Though I can ping to the linux box from there and also I can telnet ot it. What is that I am missing. Any suggestion. Thanks These services are needed to be run on the server side: - NFS server - Portmap Check if one of them is started via Inetd (etc/inetd.conf): if one is then you also need to start inetd. Check the log of your server if it is receiving any requests. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Setting debian to use Win2k as it's Internet gateway?
On Tue, 28 Oct 2003 09:09:33 +, Kevin.Bewley wrote: [EMAIL PROTECTED] Hi, I have a win2k box set to do ICS and dial on demand (not the question) - 192.168.0.1 I have my Debian laptop attached to this eth0 192.618.0.10. They share files via samba. But, I'd like to be able to set Debian so that it uses 192.168.0.1 as it's internet gateway. Just edit your /etc/network/interfaces. It should look like this (I guess your network interface on your laptop is eth0) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.10 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Woody ISDN Problem
On Sun, 26 Oct 2003 22:51:32 +0100, Markus Heller wrote: Hallo Liste, ich habe folgendes Problem: Ich moechte meine AVM FritzCard PCI konfigurieren und bekomme immer wieder einen sehr merkwuerdigen Fehler: host:~# /etc/init.d/isdnutils start Starting ISDN services: interfacesCan't open /dev/isdnctrl or /dev/isdn/isdnctrl: No such device ippp0 failed. ipppd iprofd isdnlog/dev/isdninfo: No such device /dev/isdnctrl: No such device host:~# Sorry - this system lacks PPP kernel support. Check whether you configured at least the ippp0 device! Dir fehlt der Support für deine FritzCard im kernel. Aktiviere unter ISDN support Hisax und FritzPCI sowie einige weitere Optionen (German EuroISDN z.B., lies einfach die Hilfen). Unter Netzwerk noch PPP support. Entweder baust du das ganze fest in den Kernel ein (ist am einfachsten) oder du musst die entsprechenden Module laden: Entweder automatisch über ein alias in /etc/modules.conf, wodurch Module bei Bedarf geladen werden oder (weniger elegant) durch einen Eintrag in /etc/modules, in der sich alle Module befinden, die bei Systemstart geladen werden sollen. Falls du beim Systemstart (fest im Kernel) oder beim Laden (bei Modulen) Fehlermeldungen erhältst, einfach noch mal posten. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: palm on debian
On Mon, 27 Oct 2003 14:51:52 +1300, Paul William wrote: Hi, I am getting a new palm (tunsten E) tomorrow. My last palm m105 was sold before I switched to Debian and worked fine in mdk. Is there any tip /things-i-need-todo to get a usb palm working in debian (apart from installing the right software)? Cheers Paul One thing comes to my mind: if you use jpilot the symlink /dev/pilot is set to /dev/ttyS0 after every update. So you can either update it to point to /dev/ttyUSB1 after every update of jpilot or tell jpilot to use /dev/ttyUSB1 directly. I prefer the latter. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 2.6.0-test8 PCI (?) troubles
On Sun, 26 Oct 2003 14:34:27 +0100, Kjetil Kjernsmo wrote: Yeah, I just tried test9 too. I downloaded a vanilla test8 yesterday, patched it with test9 today. That stopped even earlier... It seems something was wrong with the framebuffers. It goes down to where the Matrox fb stuff is loaded, then I get back the first few lines where the kernel is loaded, and then everything halts. If something went wrong with framebuffers: do not use it. In general if nobody has a better idea (see post of pigeon) I would suggest the following: Try to build a vanilla kernel with only those features you will need to boot: - Disable framebuffers (from kernel config, no vga parameter on boot prompt) - Disable ACPI, APM - Disable APIC - Disabe USB - Disable support for special devices like TV cards, ISDN cards etc. (searching for them might (?) confuse the PCI bus) Make sure you backup your old config so you know which options you wanted to set. However, I built these two kernels very differently. The test8-ruby I've built with make-kpkg, and starting out with Andreas' config for his kernel. With the test9, I've used make bzImage and friends, and I started out with my own 2.4.22 kernel config. It should not make a difference but I always use the make clean bzImage for a new kernel. make-kpkg should not do anything but ... Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1 OK, so this is where it stops with ACPI and APIC enabled. But I can't see anything suspecious... OK, might be what Pigeon wrote: your BIOS uses an invalid APIC - disable it. PCI: Using IRQ router default [1106/3074] at :00:11.0 Is this an ISA bridge on your system...? It is. This resembles where I stop with ACPI and APIC disabled, but there is a lot less happening between the two in my case. I didn't write it down, but I would guess it looks more like PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:04.0 This is caused by all those ACPI messages. Here is a boot log with acpi disabled: Linux version 2.6.0-test7 ([EMAIL PROTECTED]) (gcc version 3.3.2 20031005 (Debian prerelease)) #1 Thu Oct 9 14:17:31 CEST 2003 Video mode to be used for restore is 317 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000d - 000d4000 (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0fff (usable) BIOS-e820: 0fff - 0fff8000 (ACPI data) BIOS-e820: 0fff8000 - 1000 (ACPI NVS) BIOS-e820: fff8 - 0001 (reserved) user-defined physical RAM map: user: - 0009fc00 (usable) user: 0009fc00 - 000a (reserved) user: 000d - 000d4000 (reserved) user: 000f - 0010 (reserved) user: 0010 - 0fff (usable) user: 0fff - 0fff8000 (ACPI data) user: 0fff8000 - 1000 (ACPI NVS) user: fff8 - 0001 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Building zonelist for node : 0 Kernel command line: root=/dev/hda6 vga=791 acpi=off mem=262080K No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1592.834 MHz processor. Console: colour dummy device 80x25 Memory: 255488k/262080k available (2067k kernel code, 5872k reserved, 843k data, 152k init, 0k highmem) Calibrating delay loop... 3129.34 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febf9ff CPU: After vendor identify, caps: 3febf9ff CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 0080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by
Re: 2.6.0-test8 PCI (?) troubles
On Sat, 25 Oct 2003 22:39:55 +0200, Kjetil Kjernsmo wrote: You do not have to compile a new kernel for this, just try to append one of the following options in the boot prompt (edit lilo.conf or menu.list (grub)): pci=noacpi pci=biosirq acpi=off I tried adding all three, but it had appreciable effect Was it wrong to add all three, or should I conclude this wasn't it...? No, you only have to add one. Try acpi=off first - if your system does not boot with this option you can forget about the others. If it works but you do not want to disable ACPI you can try one of the others. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Insidious Spam/swen/Garbage
On Sat, 25 Oct 2003 23:33:30 +0100, Pigeon wrote: On Sat, Oct 25, 2003 at 10:28:26PM +0200, David Jardine wrote: On Sat, Oct 25, 2003 at 02:39:43AM +0100, Pigeon wrote: On Sat, Oct 25, 2003 at 01:14:38AM +0200, David Jardine wrote: It is beyond my capability (but only slightly, I feel, and it should be very easy for lots of people here) to produce a sort of interactive fetchmail that reads the headers of each message on the server, presents them to you and asks if you want to fetch the message or delete it. This is what I would like to have. ...like pop3browser? That looks useful - when I can get it working :( - and decently small. ...it's dead easy; what problem are you having? It is very simple - you do not need any config. I just installed mutt (from unstable). Then I call: mutt -f pop://[EMAIL PROTECTED] where xxx is my customer number from GMX (you can use both e-Mail address and customer number as login but I guess E-mail won't work because it has an @ inside). pop.gmx.net is your providers pop server. Then you are asked for your password and see the contents of your mailbox. Use arrow keys to move up and down, press D to delete a message. Q exits mutt, it asks you to delete the marked (D) messages. Just press enter and you are done. I do have a dial-up connection too, so this is my way to get rid of SWEN... Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 2.6.0-test8 PCI (?) troubles
On Sun, 26 Oct 2003 11:42:39 +0100, Kjetil Kjernsmo wrote: Now, it stops with the message PCI: Using IRQ router VIA [1106/0686] at :00:04.0 I assume this is (from lspci -v on 2.4.22): 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: Asustek Computer, Inc. A7M266 Mainboard Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 I'm baffled, there are no ISA slots on my mobo... But ISA bridge means perhaps something entirely different? That is OK, I have one in my laptop, too. AFAIK, the ISA bridge is contained in the chipset that is able to support ISA slots. Mainboard manufacturers normally do not put ISA slots on boards - except for industry purposes where you still need them sometimes... I had disabled ISA completely, but I just enabled it again and compiled and booted a kernel, but it didn't make any difference. ISA is sometimes needed for PCMCIA support but missing support should not stop boot process. The next thing it says after this in my 2.4.22 dmesg is PCI: Disabling Via external APIC routing I have disabled APIC too, some time ago. Try to enable apic you can disable it by passing noapic on the boot line. Did you try a kernel version different to test8? - sometimes a kernel version does not work with everybody's hardware - for me test5 did only work without ACPI. I attached my dmesg output so you can have a look if you can find anything strange before your system hangs. Greetings Andre Linux version 2.6.0-test7 ([EMAIL PROTECTED]) (gcc version 3.3.2 20031005 (Debian prerelease)) #1 Thu Oct 9 14:17:31 CEST 2003 Video mode to be used for restore is 317 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000d - 000d4000 (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0fff (usable) BIOS-e820: 0fff - 0fff8000 (ACPI data) BIOS-e820: 0fff8000 - 1000 (ACPI NVS) BIOS-e820: fff8 - 0001 (reserved) user-defined physical RAM map: user: - 0009fc00 (usable) user: 0009fc00 - 000a (reserved) user: 000d - 000d4000 (reserved) user: 000f - 0010 (reserved) user: 0010 - 0fff (usable) user: 0fff - 0fff8000 (ACPI data) user: 0fff8000 - 1000 (ACPI NVS) user: fff8 - 0001 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fb100 ACPI: RSDT (v001 AMIINT VIA_P6 0x0010 MSFT 0x0097) @ 0x0fff ACPI: FADT (v001 AMIINT VIA_P6 0x0011 MSFT 0x0097) @ 0x0fff0030 ACPI: DSDT (v001VIA P4X266 0x1000 INTL 0x02002024) @ 0x Building zonelist for node : 0 Kernel command line: root=/dev/hda6 vga=791 netprofile=Home pci=noacpi mem=262080K No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1592.181 MHz processor. Console: colour dummy device 80x25 Memory: 255488k/262080k available (2067k kernel code, 5872k reserved, 843k data, 152k init, 0k highmem) Calibrating delay loop... 3072.00 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febf9ff CPU: After vendor identify, caps: 3febf9ff CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febf9ff 0080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030918 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Embedded Controller [EC0] (gpe 5) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI
Re: 2.6.0-test8 PCI (?) troubles
On Fri, 24 Oct 2003 22:56:57 +0200, Kjetil Kjernsmo wrote: [...] When I boot up, I get kernel messages rolling along, but stops with the following line: PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1 then, the LED on the floppy drive lights up and remain lit, and then it just sits there. Nothing happens, I and have to push the reset button to reboot. It doesn't tell me it's panicked either. I find the same line in my 2.4.22 dmesg. What follows after booting 2.4.22 is this: PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:04.0 PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 [...] Hi, had some PCI problems with 2.6, too. I were able to solve them by disabling ACPI (partially or generally). You do not have to compile a new kernel for this, just try to append one of the following options in the boot prompt (edit lilo.conf or menu.list (grub)): pci=noacpi pci=biosirq acpi=off For me, test3 worked without any options, test4 required pci=noacpi and test5 would not work until I diabled ACPI (acpi=off). Now I have test7 and it works with pci=noacpi. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Eclipse installation: j2re1.4 has no installation candidate (Debian SID)
On Mon, 20 Oct 2003 17:29:10 +0200, Johannes Zarl wrote: apt-get said that eclipse-platform depends on j2re1.4 or j2re1.3 or java2-runtime but these packages are not available. How can I install eclipse? And is there a deb package for Sun's jdk? You could look into the equivs package, use it to set up a dummy-package for j2re1.4 and then install eclipse. Johannes Installed sun java some days ago. Dowloaded .bin from sun, installed it. Used equivs-package to build dummy packages for dependencies if I would remove my blackdown some time. Make sure to set up your alternatives to point to the correct jdk. Good howto: http://www.debian.org/doc/manuals/debian-java-faq/ch11.html#s11.2 Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sed problem
On Sun, 19 Oct 2003 11:37:44 +0100, Dave selby wrote: I need to get the contents of a HTML title tag put it in a string. ie titlespecialist cards/title I need the specialist cards in a variable $titlecontents I thought it would be easy with sed sed -n '/title/,/\/title/p' But no go. I have tried various ways but to no avail. Any ideas ? Dave Try: sed 's#title\(.*\)/title#\1#' Greetigs Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Anybody using 2.6 kernel packages?
On Wed, 15 Oct 2003 10:40:34 -0500, Kirk Strauser wrote: Is anyone using the 2.6.0-test* kernel packages -- successfully? I I do not use the debian packages but compile the source from kernel.org since test1. installed the -test4 image to play around, and I immediately noticed three things: 1) I can't log in to a KDE session using KDM. 2) My motherboard's Tried another login manager? I use gdm here, no problems. Promise IDE controller is detected, but neither of the drives (one CD-R, one DVD) are found. Perhaps you still have hdc=ide-scsi in your lilo/grub command line? Remove them they are not needed any more. 3) I can't type the | character at a console prompt. Sorry, no problems here. I don't really have the time to track these down right now so I rebooted back into 2.4, but I was wondering if anyone has had better luck than I did. Is it worth upgrading at this time? I've head that 2.6 has much better support for IDE CD-Rs; is this true? Thanks, Perhaps try to compile your own kernel from source. If the problem persists it might be a kernel problem - if not it seems to be related to debian patches or packaging. Regards Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SIOCSIFFLAGS: Device or resource busy
On Tue, 14 Oct 2003 23:50:31 +0800, Brian Walker wrote: Greetings all, The subject line is the response I get when I try to establish a link to the internet. Debian Woody, dual booting with XP. Self-built box. All was working well. I had not switched off the computer (I usually do, because the internal cooling was not coping with Hong Kong un-airconditioned temperatures, [...] The ifconfig is OK - although Tx errors are present with nil arriving. ifup eth0 causes a long pause for thought, with the SIOCSIFFLAG Driver or resource busy message. I am grateful for any ideas. Brian I fear your NIC is damaged. The message just says that a problem with that device has been encountered. But ifconfig showing errors is a bad sign - might be driver problems or hardware. If you did not change anything I would guess it is a hardware problem. As Windows has problems with the card, too, a hardware problem is quite sure. If you can put the NIC in another PC, and another NIC in your PC. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Can't install kernel compiled on sid machine on a woody system
On Wed, 15 Oct 2003 13:40:18 +0200, Magnus von Koeller wrote: PLEASE CC ME, I'M NOT ON THIS LIST! Thanks! I tried compiling a new 2.4.22 kernel for the old pentium machine that does my routing services. Because this is done about 20 times as fast on my laptop, of course I compiled it there. In fact, I made a .deb with make-kpkg. Did you set the gcc options to compile for i586? If your kernel is comiled with standard options (guess i686 for a new machine like your laptop) it will not run on a pentium. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Speicherproblem
On Thu, 09 Oct 2003 12:52:31 +0200, Thomas Jachmann wrote: Moin, mein System hat 1GB RAM, es laufen auch einige Anwendungen, die speicherhungrigsten sind Tomcat und JBoss. JBoss läuft aber nicht immer. Tomcat beansprucht nach dem Neustart ca. 60-70 MB, insgesamt sind um die 200 MB belegt. Mit der Zeit läuft der Speicher aber voll. Nach ein paar Wochen waren heute weit über 600 MB belegt, also 400 MB mehr als nach einem Neustart. Die Anwendungen selbst haben aber nicht gross zugelegt, Tomcat immer noch an der Spizte mit um die 70 MB. Jetzt frage ich mich, wo der Speicher geblieben ist... Wie kann ich so was rausfinden? Dein Hauptspeicher wird zum Cachen der Festplatte genutzt. Gib mal free ein, da wirst du sehen, dass diese 400MB in buffers und cached stecken. Ist also ganz normal. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Compiling pcmcia-cs to go with a 2.6.0-test5 kernel.
On Thu, 25 Sep 2003 17:28:32 +0200, Alex Polite wrote: Hi. I've managed to get 2.6.0-test5 up and running on my notebook. The only thing not working is pcmcia. The compiled 2.6.0-test5 kernel is in /usr/src/linux. The pcmcia-cs sources version 3.1.33-6 are in /usr/src/modules/pcmcia-cs/ Hi, AFAIK kernel 2.6 has the latest pcmcia-sources included. So you don't need the extra pcmcia-source package. Just use the pcmcia-cs debian package to have the control binaries and config files. Just make sure you include PCMCIA support when building your kernel. I am running 2.6 sice test1 with running PCMCIA (well for me it's CF support as I only have a CF slot) and it works very well. Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: setting umask for an nfs mount
On Wed, 24 Sep 2003 16:45:59 +0100, Shri Shrikumar wrote: On Wed, 2003-09-24 at 15:05, Mark Ferlatte wrote: The umask is a per-process setting, not a per mount setting. What are you trying to accomplish? I have the following directory structure ~/ src/ shared/ What happens now is that wherever I create a file, its created with -rw-rw permissions. What I would like is for all files in share to be created with the permissions of -rw-rw-r-- Having the same problems here. Solved it by writing a script setperms.sh that sets the correct permissions. This script can be called by a cron job. Not a nice solution but I found no better. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cdrecord as regular user
On Wed, 24 Sep 2003 11:22:14 +0200, David Fokkema wrote: Hi group, I have problems with cdrecord when run as a regular user. I configured the debian package with suid, but still I get the irritating RR-scheduler warnings: [EMAIL PROTECTED]:~/files/iso$ ls -l /usr/bin/cdrecord* -rwsr-sr-x1 root cdrom 142 Sep 12 15:17 /usr/bin/cdrecord -rwsr-xr--1 root cdrom 342924 Sep 12 15:17 /usr/bin/cdrecord.mmap -rwsr-sr--1 root cdrom 342924 Sep 12 15:17 /usr/bin/cdrecord.shm Try to set cdrecord.mmap suid for groups, too (chmod g+s /usr/bin/cdrecord.mmap). suid on cdrecord is ignored as it is a script and calls (at least for me) cdrecord.mmap. Hope that helps for you; I have the following permissions: -rwxr-xr-x1 root root 142 Sep 12 15:17 cdrecord -rwsr-sr--1 root cdwriter 342924 Sep 12 15:17 cdrecord.mmap -rwsr-xr--1 root cdrom 342924 Sep 12 15:17 cdrecord.shm and get the same warning. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Kernel 2.6 and modutils
On Sun, 21 Sep 2003 13:46:03 +0200, Raffaele Sandrini wrote: On Sunday 21 September 2003 13:16, Raffaele Sandrini wrote: Hi I tired to install a 2.6.0-test4 (debain release) kernel. After the reboot i was not able to use the modutils (and all modules) at all. It [...] Ok i found it. I need to install the module-init-tools package... Another hint: What has been /etc/modutils for 2.4 is for 2.6 kernels /etc/modprobe.d. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Evolution without X / PIM on server
Hi, can you run evolution without a gui? If not perhaps anybody has another idea: I have a palm as well as a mobile phone that can sync to evolution via multisync. I want to keep all data in sync and AFAIK evolution is the only solution in linux everybody can sync to (perhaps some kde applications but that would not help me either). I have a linux server (DNS, Firewall, NFS, etc.) running at home and would like to have a cantral calendar and contacts I can sync with - so evolution. But the server does not have X installed and I do not want it to. Is there any way to run evolution without X and all those gnome gui libraries? Or is there another way to have a central calendar, contacts and tasks repository that can sync to palm and other devices? Thanks in advance Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Irda-Probleme
On Sun, 14 Sep 2003 23:33:56 +0200, Robert Rakowicz wrote: das meinte ich nicht. Ich kann in meiner gericom in BIOS SIR oder FIR einstellen. Unter Linux /mit meinem Compi) tut es nur wenn SIR eingestellt ist. Das BIOS vom Gericom X5 ist spartanisch - IRDA kann nur enabled oder disabled werden. Habe ich jetzt mal disabled - gleiches Ergebnis: Linux erkennt IRDA trotzdem, alles wie gehabt, keine anderen Devices gefunden. PS: Gibt es einen freien News-Server, der diese Gruppe vorhält und Posten erlaubt? Keine Ahnung. Was gefehlt Dir an der ML nicht? Ich habe unter Mails lieber nur wirkliche Mails. Newsgruppen verwende ich einen eigenen Newsreader - da lese ich dann nur das, was mich interessiert. Bei einer solch aktiven Gruppe wie dieser wäre es mir auch zu anstrengend, alle Nachrichten herunterzuladen - bin nur über ISDN drin. Habe jetzt was gefunden: www.gmane.org; dies ist jetzt mein erstes Posting, mal sehen, ob es läuft. Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Irda-Probleme
On Sun, 14 Sep 2003 22:10:10 +0200, Robert Rakowicz wrote: Andre Kalus [EMAIL PROTECTED] writes: Sieht vom Log recht gut aus... [...] hast Du im BIOS es auch entsprechend eingetragen? Im BIOS ist IRDA aktiviert. Windoof kann auch damit umgehen - das hasse ich - Windoof kann was, was ich mit Linux nicht tun kann :-((( P.S. Deine Zeilen sind viel zu lang ;( Danke, ich stelle es erschreckt fest. In meinem Mail-Prog (Sylpheed-Claws) ist das Wrapping korrekt; habe jetzt Smartwrapping aus, mal sehen ob es besser ist. Viele Grüße Andre PS: Gibt es einen freien News-Server, der diese Gruppe vorhält und Posten erlaubt? -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Irda-Probleme
On Sun, 14 Sep 2003 08:10:08 +0200, Martin Heinrich wrote: IRDA-Howto und ähnliches gelesen. Hat irgendjemand noch Ideen? würd dich erstmal auf http://www.linux-on-laptops.com/ verweisen. Die Seiten haben mir nach langem Probieren auch geholfen. Leider kannte ich sowohl die Seite als auch alle Berichte zum X5 bereits, aber trotzdem danke. Viel Spass beim probieren... hab hier heut bis um 1 gebastelt bis alles lief! :-D Ja, wenn es dann nach dem Basteln läuft, ist es gut. Leider läuft es nach jetzt vielen Stunden basteln immer noch nicht... Viele Grüße Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Irda-Probleme
Hallo, ich bekomme Irda auf meinem Laptop (Gericom X5, Via-Chipsatz) einfach nicht zum Laufen (Kernel 2.6.0-test1 bis test 5). Zuerst habe ich es mit den SIR-Treibern versucht: modprobe serial modprobe irtty-sir irattach /dev/ttyS0 -s Sieht vom Log recht gut aus... Sep 14 02:02:35 renate kernel: Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled Sep 14 02:02:35 renate kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 14 02:02:53 renate kernel: sirdev_get_instance - ttyS0 Sep 14 02:02:53 renate kernel: irtty_open - ttyS0: irda line discipline opened Sep 14 02:02:54 renate irattach: executing: 'echo renate /proc/sys/net/irda/devname' Sep 14 02:02:54 renate irattach: executing: 'echo 1 /proc/sys/net/irda/discovery' Sep 14 02:02:54 renate irattach: Starting device irda0 Sep 14 02:02:54 renate kernel: irlap_change_speed(), setting speed to 9600 ... leider werden bei einem irdadump keine anderen Devices gefunden (nur der Computer selber). Verwende ich die neuen Via-FIR-Treiber, scheitert es bereits beim Initialisieren: setserial /dev/ttyS0 uart none rmmod serial irattach irda0 -s wobei irda0 ein alias von via_ircc ist. Das ergibt folgenden Fehler: Sep 14 02:01:01 renate irattach: executing: '/sbin/modprobe irda0' Sep 14 02:01:01 renate irattach: + FATAL: Module via_ircc already in kernel. Sep 14 02:01:01 renate irattach: Trying to load module irda0 exited with status 1 Sep 14 02:01:01 renate irattach: executing: 'echo renate /proc/sys/net/irda/devname' Sep 14 02:01:01 renate irattach: executing: 'echo 1 /proc/sys/net/irda/discovery' Sep 14 02:01:01 renate irattach: Starting device irda0 Sep 14 02:01:01 renate irattach: ioctl(SIOCGIFFLAGS): No such device Sep 14 02:01:01 renate irattach: Stopping device irda0 Sep 14 02:01:01 renate irattach: ioctl(SIOCGIFFLAGS): No such device Sep 14 02:01:01 renate irattach: exiting ... IRDA-Howto und ähnliches gelesen. Hat irgendjemand noch Ideen? Vielen Dank Andre -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)