Re: problems activating wireless
Ulrich Hiller ([EMAIL PROTECTED]) wrote: I have a Toshiba satellite Notebook with Debian version 40r4. I have problems with the wireless card. It is a Intel PRO/Wireless 3945 ABG I have installed ipw3945-modules-2.6.18-6-686 ipw3945-source 1.1.2.-7 hostaputils (all from the repositories) iwconfig gives [no wireless devices shown] Obviously the card is not seen. Any idea what else I could do? (By the way: It did nod work either in 40r3, but it works on opensuse 11.0, fedora 9, mandriva 2008.1 and ubuntu 8.04.) Install the following package: http://packages.debian.org/etch/firmware-ipw3945 and reload the driver module ipw3945: modprobe -r ipw3945 modprobe ipw3945 Also check your dmesg output. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: configure options
André Hänsel ([EMAIL PROTECTED]) wrote: I'm in contact with the freetype developers to track down a difference between two versions because I'm having problems with one version. For this purpose I need to know which ./configure options were used when compiling the library and PHP. It is a debian precompiled binary, so where can I find that out? Download the Debian source packages (e.g. using apt-get source freetype or using dget, unpack the archive (dpkg-source -x freetype-x.y.z.dsc) and check the debian subdirectory, especially the rules file. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: problems activating wireless
Ulrich Hiller ([EMAIL PROTECTED]) wrote: Andreas Janssen wrote: Install the following package: http://packages.debian.org/etch/firmware-ipw3945 and reload the driver module ipw3945: modprobe -r ipw3945 modprobe ipw3945 Also check your dmesg output. Thank you for the quick answer. I did it, but no change, even after a reboot. Or should I first uninstall some other packages. Regards, ulrich Please post your kernel version (uname -r) and the output of lsmod and of dmesg | grep eth. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: grub in my sid system broken
Gilles Mocellin ([EMAIL PROTECTED]) wrote: Le Thursday 07 August 2008 15:41:25 chris, vous avez écrit : On Tue, 05 Aug 2008 13:28:56 -0700, Paul Scott wrote: Running postinst hook script /sbin/update-grub. User postinst hook script [/sbin/update-grub] failed to execute: No such file or directory It looks as if there is no /sbin/update-grub on your system. If so, you might want to reinstall grub. I remember that since a while there was messages saying to change /sbin/update-grub to /usr/sbin/update-grub when upgrading kernels... Perhaps now, it's not anymore in compatible mode. Search in /etc/initramfs-tools if you have a reference to /sbin/update-grub, and change it to /usr/sbin/grub. The messages that you remember recommended to edit /etc/kernel-img.conf and to change /sbin/update-grub to update-grub. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Upgrading necessary, but maybe not
Hugo Vanwoerkom ([EMAIL PROTECTED]) wrote: Rodolfo Medina wrote: The Huawei e169 umts usb modem seems to work fine with Debian Sid, kernel 2.6.25-2-686 kernel, but not with my Debian Etch, kernel 2.6.18-4-k7. Now, in order to have the device working, I should upgrade my system to Sid or even maybe simply upgrade only my kernel to 2.6.25-2-686. I wonder if there is a third possibility, i.e. keep my old kernel but simply recompile it. Can anybody suggest if such a way is good and how I can know the proper module to install before compiling the kernel? You could recompile 2.6.25-2-686 on you Etch system from source and then install the result. Or you could install 2.6.25 from http://www.backports.org/dokuwiki/doku.php regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: kernels for Lenny; was Re: Alsaconf halting a frozen laptop.
PETER EASTHOPE ([EMAIL PROTECTED]) wrote: Nigel others, At Fri, 25 Jul 2008 21:39:40 +0200 N.H. wrote, ... Lenny install, I have the following kernels available. 2.6.8 2.6.11 With /etc/apt/sources.list set to lenny, dselect offers only 2.6.16 and 2.6.25. Can dselect install 2.6.11? No, 2.6.11 is not in the archive anymore. In fact, even Etch, the version released last year in April, came with Kernel 2.6.18. Lenny currently only has 2.6.25, and will probably be updated to 2.6.26 before the release. 2.6.8 was included in Sarge, released in June 2005. However Sarge is outdated and not supported by the Debian security team anymore. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How do I enable UUID in Debian?
Aniruddha ([EMAIL PROTECTED]) wrote: Since my harddrive names keep changing after each reboot I have to set UUID in grub to make sure I can boot. I've done this before in Gentoo and I wonder how this works in Debian. Do I have to install a special package? Which line do I have to add to my menu.lst? I was thinking about something like this: titleDebian GNU/Linux, kernel 2.6.24-1-686 root (hd2,1) kernel /boot/vmlinuz-2.6.24-1-686 root=UUID=dd4927a2-e1f4-4955-8aa7-76a11d8c3aca init=/linuxrc ramdisk=8192 initrd /boot/initrd.img-2.6.24-1-686 Is this correct? Thanks in advance! I have not tested this for the root partition, but if you use initramfs for your initrd, which includes udev in the initial ram disk, you should be able to access /dev/disk/by-uuid/UUID regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: modem and default gw
remigio ([EMAIL PROTECTED]) wrote: on my pc I have installed a network pci card and an internal softmodem. Both them work fine but I have a problem with the default gateway. In /etc/network/interfaces is defined a gateway that is used by the nic, and the command ip route shows this defgw. When I use Kppp and the modem to connect to the Internet, I note that the defgw remain the same (the one defined for the nic) although in kppp I set the option Assign the Default route to this gateway, and I can't go on the Internet. For security reasons, pppd does not change the default gateway if you already have a default gateway (at least if you use the noauth option, as far as I know). You need to explicitely allow this using the replacedefaultroute option in /etc/ppp/peers/kppp or /etc/ppp/options. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: etch to lenny upgrade
Randy Patterson ([EMAIL PROTECTED]) wrote: I have changed my sources.list to read as below. I just changed the old one by changing etch references to lenny. My current sources.list deb ftp://debian.mirrors.tds.net/debian/ lenny main contrib non-free deb-src ftp://debian.mirrors.tds.net/debian/ lenny main contrib non-free When I do, aptitude upgrade Well, that's probably already the first mistake. If you do something else than upgrading a stable version using security updates, you need dist-upgrade because it enables apt/aptitude to handle changed dependencies - e.g. to remove packages because of conflicts, or install additional packages because of new dependencies. debian:/home/randy# aptitude upgrade [...] Writing extended state information... Error! E: I wasn't able to locate file for the linux-image-2.6.18-4-486 package. This might mean you need to manually fix this package. E: Couldn't lock list directory..are you root? I'm not sure how to continue from here? Make sure you have root permissions (and enough free space in /var to download the new packages). And maybe wait with using Testing until you have some more experience with the package management, because you surely will run into changes dependency problems more often than with Testing that with Stable. And, of course, don't forget to install apt-listchanges. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problems after mixing Sarge and Etch
NickDG ([EMAIL PROTECTED]) wrote: I inherited from my long gone predecessor the administration of an old server running Sarge. It is used for Bugzilla and Mantis and partly as webserver. I'm not very familiar with Debian, I'm a Mandriva man myself, but I'm the only one in the company left that has Linux experience. To keep the system up-to-date I do a aptitude update aptitude upgrade -y each time I get a Security Advisory email . I think it was last week there were a whole bunch of packages that where held back. After some surfing I concluded that I had to do a aptitude dist-upgrade and indeed almost all packages could now be installed. Only a few weren't: [...] deb http://security.debian.org/ stable/updates main contrib deb http://ftp.nl.debian.org/debian sarge main contrib Yep, there's my problem (I guess): I've mixed Sarge with stable and stable is now Etch. So finally my questions: How can I salvage my system? Will replacing stable with sarge in the sources.list and do a aptitude update and aptitude upgrade (or aptitude dist-upgrade) solve my problems? Probably not, if you already have packages from Etch installed. In that case you would have to downgrade them, but downgrading is tricky and not officially supported. I recommend you upgrade to Etch instead. Don't forget to take a look at the Etch release notes first! regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Etch Updates
Nyizsnyik Ferenc ([EMAIL PROTECTED]) wrote: L.V.Gandhi [EMAIL PROTECTED] wrote: After 6th april, I am not getting any updates for Etch. My /etc/apt/sources.list is deb http://ftp.us.debian.org/debian/ etch main non-free contrib deb-src http://ftp.us.debian.org/debian/ etch main non-free contrib deb http://security.debian.org/ etch/updates main contrib non-free deb-src http://security.debian.org/ etch/updates main contrib non-free deb http://www.debian-multimedia.org/ etch main Any comments? deb http://ftp.us.debian.org/debian/ proposed-updates main non-free contrib proposed-updates is not recommended for end users. It is used by developers to upload packages that *might* be considered for the next stable point release. There is however no guarantee that these packages will (or can) be accepted by the stable release managers. If they are rejected you may end up with packages without security updates. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Etch Updates
L.V.Gandhi ([EMAIL PROTECTED]) wrote: After 6th april, I am not getting any updates for Etch. My /etc/apt/sources.list is deb http://ftp.us.debian.org/debian/ etch main non-free contrib deb-src http://ftp.us.debian.org/debian/ etch main non-free contrib deb http://security.debian.org/ etch/updates main contrib non-free deb-src http://security.debian.org/ etch/updates main contrib non-free deb http://www.debian-multimedia.org/ etch main Any comments? http://www.us.debian.org/releases/etch/ regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Many LUKS partitions
Salvatore Iovene ([EMAIL PROTECTED]) wrote: I have more than one encrypted partition (using dm-crypt), and so, at boot time, I'm propted for all of their passphrases. Is there a way to set a sort of master passphrase so that I'll only input it once? Yes and no. What you can do: - Create one big partition, and encrypt it. Build an LVM on that partition and divide it as you want. That way you will only need one password, which unlocks the big partition that holds the LVM. - Store keyfiles on the first encrypted partition. Enter the password for that partition, tell cryptsetup that this partition needs to be mounted for the other ones to be accessed. Another question: is there a way to use a USB pendrive to store the information needed to LUKS to decrypt the partitions? (so that I wouldn't have to fill in any password, just plug the USB pendrive) Yes, there is. For any partition *except* the root partition, you need to make the following changes: - add the key to the luks-Partitions using cryptsetup luksAddKey - make an entry for your stick in your fstab, e.g. /media/key - copy the keyfile to the stick, e.g. to /media/key/keyfile - change your crypttab to use the keyfile, e.g. usr-crypt /dev/hda7 /media/key/keyfile luks - change CRYPTDISKS_MOUNT in /etc/defaults/cryptsetup to include your USB stick, e.g. CRYPTDISKS_MOUNT=/media/key - rebuild your initrd using update-initramfs -u As far as I know using a key on an USB stick for your root partition is a little more complicated. I needed to make the following extra changes: - change /etc/initramfs-tools/modules to make sure initramfs includes the necessary modules for the fat file system and codepages (not needed if you use ext2 as the file system on your stick, usb mass storage and scsi disk support were included by default) I hat to add the following lines: nls_cp437 nls_iso8859_1 vfat - write a keyscript that takes care of mounting the stick, gets the key file, writes it to stdout and unmounts the stick. The script I use is this one: #!/bin/sh modprobe usb-storage#load usb mass storage driver sleep 5 #wait for recognized devices to settle mkdir /keydev 12 mount -t vfat -o ro,umask=077 /dev/sda1 /keydev 12 cat /keydev/key umount /keydev 12 Note that all normal output is redirected to stderr so it doesn't get mixed up with the key file. - save the keyscript to /sbin and change the crypttab entry for my root partition: root_crypt /dev/hda6 noneluks,keyscript=/sbin/keyscript Note that using /sbin is not required, you can save the keyscript anywhere you like and adapt your crypttap accordingly. - rebuild the initrd using update-initramfs -u. It will include your keyscript automatically, no need to copy anything on your own. That's it. Another thing you should keep in mind when changing crypto settings for your root partition: when you do something wrong and rebuild the initrd, after rebooting you won't be able to mount the root partition anymore, except with the help of some external Linux system, e.g. from a live CD like grml or knoppix. Keep a backup of your initrd with the settings still using passwords and add an entry for it to your boot loader configuration - that way as long as you are not sure that everything works you can still boot into your system using your passwords. Took me more that an hour of rebooting grml, cryptsetupping, mounting, chrooting my root fs and rebuilding initrds until I had the idea to do it another way. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Many LUKS partitions
Salvatore Iovene ([EMAIL PROTECTED]) wrote: On Mon, 30 Apr 2007 18:22:48 +0300 Salvatore Iovene [EMAIL PROTECTED] wrote: On Mon, 30 Apr 2007 15:14:44 +0200 Andreas Janssen [EMAIL PROTECTED] wrote: - add the key to the luks-Partitions using cryptsetup luksAddKey - make an entry for your stick in your fstab, e.g. /media/key - copy the keyfile to the stick, e.g. to /media/key/keyfile - change your crypttab to use the keyfile, e.g. usr-crypt /dev/hda7 /media/key/keyfile luks - change CRYPTDISKS_MOUNT in /etc/defaults/cryptsetup to include your USB stick, e.g. CRYPTDISKS_MOUNT=/media/key - rebuild your initrd using update-initramfs -u Hi, thanks a lot, that worked very well. Just a note: the entry for the usb stick in fstab has to have the following options: uid=0,gid=0,umask=277. By the way, could you explain to me why the update-initramfs -u is needed? Thanks. The initial ram disk is mounted first and supplies a minimal system that is sufficient to load drivers, initialize LVM/raid/crypto devices in order to mount your root partition. If you encrypt your root partition, you need to update the ram disk so a new initrd is created that can set up your encrypted root partition properly, otherwise you wouldn't be able to mount it. You can also have it set up other encrypted partitions, although this is not absolutely necessary. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless - is it possible?
Default User ([EMAIL PROTECTED]) wrote: I did install ndiswrapper-common, but when I run sudo ndiswrapper, i get: Error: no versions of ndiswrapper found! man ndiswrapper only says: ndiswrapper is a wrapper for the version-specific ndiswrapper-X.X programs (where -X.X is ndiswrapper is a wrapper for the version-specific ndiswrapper-X.X programs (where -X.X is the version number of the utils; ie, ndiswrapper-1.8). It simply figures out which version should be called, and calls the appropriate binary. Each version?s man page contains its usage details. Well gee, that sure explains it all . . . You did not install the ndiswrapper programs and the ndiswrapper kernel module. Install ndiswrapper-utils and run module-assistant auto-install ndiswrapper-source After that, follow the configuration guidelines in the ndiswrapper Wiki on ndiswrapper.sf.net. For the future, use apt-cache show $packagename and apt-cache search $keyword to get more information on the packages you are about to install. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless - is it possible?
Default User ([EMAIL PROTECTED]) wrote: On Sun, 2007-04-29 at 00:14 +0200, Andreas Janssen wrote: Default User ([EMAIL PROTECTED]) wrote: On Sat, 2007-04-28 at 23:24 +0200, Andreas Janssen wrote: Default User ([EMAIL PROTECTED]) wrote: I think one of them uses a ralink chipset, which means that there is a driver available, however you need to compile and install it yourself (e.g. using module-assistant). The netgear wg511t pcmcia card also works, it uses an atheros chipset and runs with the madwifi driver. Packages are available in non-free, so you also need to build them using non-free. If you want to buy Netgear adapters, take a close look at the product name. An additional letter or number can mean that is uses a completely different chipset. FWIW, the MA111 says FCC ID: PY3MA111 on the side, and the WG111 says PY3WG111V2 on the side. I do not know how to determine the chipset inside either. I am not married to Netgear, I just happen to have those two adapters (purchased new). I am not familiar with moduel-assistant, or adding or subtracting kernel modules. Nor have I ever built a package, or compiled a driver. I have never rebuilt a kernel. I would much rather just buy a new adapter, if it would JUST WORK, without any fuss. If I could only find one. Maybe lsusb knows. As for module-assistant, usually it is sufficcient to - replace main with main contrib non-free in your sources.list and run apt-get update - install module-assistant - run module-assistant prepare - run module-assistant auto-install $driver-source - load the driver manually or reboot regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html The output of sudo lsusb is: Bus 001 Device 003: ID 0846:4110 NetGear, Inc. MA111 WiFi (v1) Bus 001 Device 004: ID 0846:4240 NetGear, Inc. WG111 WiFi (v2) Bus 001 Device 002: ID 058f:9254 Alcor Micro Corp. Hub Bus 001 Device 001: ID : There they are, but it doesn't seem to say what chipset they have. And as for: module-assistant auto-install $driver-source, what would $driver-source be, and where? I did take to heart, from man module-assistant: NOTE: don?t even think about using some random kernel-source-x.y.z package contents (or linux-x.y.z tarball from the Internet) to specify the kernel source for your currently running kernel. Don?t! Those source is not exactly what have been used to build the running kernel and its configuration most likely does not match yours. I think that just refers to the kernel source code, not to module source code to be added. I think . . . No. It means you need to install the matching headers for your running kernel to build the modules. If you use a precompiled Debian package, running module-assistant prepare will install them. The name of course depends on the driver. If you use an atheros based card, it is madwifi-source. If you use a ralink based card, the name is rt2x00-source (new driver), or rt2400-source/rt2500-source/rt2570-source (older driver, but less experimental). regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sarge Update Problem
Hello Brandon B ([EMAIL PROTECTED]) wrote: Hopefully someone can help here... I'm on an R50e Thinkpad with Sarge installed. I ran an upgrade (note: upgrade not dist-upgrade). Something strange happened. The file /etc/debian-release states 4.0 now. In my /etc/apt/apt.conf I had the following entry: APT::Default-Release sarge; As far as I know you cannot pin to codenames. Run apt-cache policy libc6 If your setting works, the version from sarge has a priority of 990. If it is 500, your setting was ignored because it is invalid, and you partially upgraded to etch. In that case, read the Etch release notes to complete your upgrade, or reinstall Sarge. [...] The following packages have unmet dependencies: xlibmesa-glu: Depends: xfree86-common but it is not installable Conflicts: libglu1 which is a virtual package. libglu1-mesa: Conflicts: libglu1 which is a virtual package. ** The Etch release notes have some info on this problem. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: KDE bug
Robert Heel ([EMAIL PROTECTED]) wrote: I would like to write a bugreport, but I don't know which package is responsible for. If you have configured a large background image in KDE (Debian etch), on slow machines the error message(s) The process for the ... protocol died unexpectedly appears on startup. (See also http://www.kde-forum.org/thread.php?postid=63578 ) According to that thread it is a problem with the kdesktop program. [EMAIL PROTECTED]:~$ dpkg -S /usr/bin/kdesktop kdesktop: /usr/bin/kdesktop Looks like you need to report your bug against the kdesktop package. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: RAM 95% used
somethin2cool ([EMAIL PROTECTED]) wrote: even though i'm not running anything. in processes task manager says i'm using a total of 25mb, inc dependencies. in resources, it says 204. given the sluggishness of the totally minimal system i believe the later. however, even if i was to open every gui ap, it shouldn't use that much. what's wrong with it? why is it using up my ram? atm, just ruunning xfce takes 200mb. nothing stupid is installed, the whole point was for a fast system [EMAIL PROTECTED]:~$ free -m total used free sharedbuffers cached Mem:504497 7 0 28211 -/+ buffers/cache: 256247 Swap: 1023134889 That means: 504 mbytes of RAM are used, but this includes 211 mbytes that are used for file caching. The cache size will decrease when applications need the RAM. The second line shows you how much RAM is used without the cache. Also take a look at top or htop. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: RAM 95% used
Roberto C. Sánchez ([EMAIL PROTECTED]) wrote: On Sun, Apr 29, 2007 at 09:07:35PM +0100, somethin2cool wrote: But it isn't handling the memory well. Everything is rubbish and sluggish right from start-up. Something is wrong well, how much total physical RAM do you have? How much swap? How much swap is being used? And of course, how fast is your CPU? regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless - is it possible?
Default User ([EMAIL PROTECTED]) wrote: Easy question: has anyone been able to get any currently available wifi USB or PCMCIA adapter to work with a 2004 Toshiba Satellite M35X-S109 laptop (no built-in wifi), using Debian Etch? Very hard question: if so, how were you able to do it? I have tried a Netgear MA111 (v1?) USB adapter. I have only been able to get it to work out of the box with OpenBSD (any recent distribution), and Freespire 1.0.13 (before the switch to an Ubuntu base). I have also tried a Netgear WG111 (v2) adapter. To date, it won't work out of the box with any of many non-M$ OSes tried. I think one of them uses a ralink chipset, which means that there is a driver available, however you need to compile and install it yourself (e.g. using module-assistant). The netgear wg511t pcmcia card also works, it uses an atheros chipset and runs with the madwifi driver. Packages are available in non-free, so you also need to build them using non-free. If you want to buy Netgear adapters, take a close look at the product name. An additional letter or number can mean that is uses a completely different chipset. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wireless - is it possible?
Default User ([EMAIL PROTECTED]) wrote: On Sat, 2007-04-28 at 23:24 +0200, Andreas Janssen wrote: Default User ([EMAIL PROTECTED]) wrote: I think one of them uses a ralink chipset, which means that there is a driver available, however you need to compile and install it yourself (e.g. using module-assistant). The netgear wg511t pcmcia card also works, it uses an atheros chipset and runs with the madwifi driver. Packages are available in non-free, so you also need to build them using non-free. If you want to buy Netgear adapters, take a close look at the product name. An additional letter or number can mean that is uses a completely different chipset. FWIW, the MA111 says FCC ID: PY3MA111 on the side, and the WG111 says PY3WG111V2 on the side. I do not know how to determine the chipset inside either. I am not married to Netgear, I just happen to have those two adapters (purchased new). I am not familiar with moduel-assistant, or adding or subtracting kernel modules. Nor have I ever built a package, or compiled a driver. I have never rebuilt a kernel. I would much rather just buy a new adapter, if it would JUST WORK, without any fuss. If I could only find one. Maybe lsusb knows. As for module-assistant, usually it is sufficcient to - replace main with main contrib non-free in your sources.list and run apt-get update - install module-assistant - run module-assistant prepare - run module-assistant auto-install $driver-source - load the driver manually or reboot regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Etch 32-bit system w/ AMD64 proc.
Hello Joe Hart ([EMAIL PROTECTED]) wrote: Bill Thompson wrote: So, I do a lot of multi-media work on my home workstation. The processor is an AMD64, but I don't want to hassle with a 32-bit chroot partition, so I just run the whole machine in 32-bit mode. The question I have is which Etch packaged kernel would you recommend for this situation? linux-image-2.6-486 or linux-image-2.6-k7? Personally, I would pick the K7. It has some optimization for the AMD processor, but both will work just fine. Etch/i386 also comes with an AMD64 kernel package. It should run fine with a 32 bit userspace environment. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: can't change links in /dev
Hello Bill ([EMAIL PROTECTED]) wrote: I currently have a link in /dev between hda, a dvd drive, and /dev/dvd: lrwxrwxrwx 1 root root 3 2006-12-26 17:24 /dev/dvd - hda I want to change the link so that it points to hdc, another dvd drive: ie /dev/dvd - hdc I am unable to make this change, except in the current session and this doesn't survive a reboot. ie: rm /dev/dvd ln -s /dev/hdc /dev/dvd reboot ls -l /dev/dvd lrwxrwxrwx 1 root root 3 2006-12-26 17:24 /dev/dvd - hda I have no idea why this happens. How is the link being restored on boot? From where? You probably use udev, which generates device files and symlinks dynamically. Take a look at /etc/udev/rules.d/z25_persistent-cd.rules. regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Distri-Upgrade
Hallo Boris Höffgen ([EMAIL PROTECTED]) wrote: ich habe einen Rechner noch auf Woody laufen und würde diesen gerne upgraden, z.B. auf Sarge oder besser warten und dann auf Etch? Wie muss ich vorgehen und was gilt es zu beachten? Ist mit großen Komplikationen zu rechnen? Der Upgrade-Vorgang ist in den Sarge Release Notes beschrieben: http://www.debian.org/releases/sarge/releasenotes Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kernel Consolenauflösung
Hallo Klemens Kittan ([EMAIL PROTECTED]) wrote: Es kann Probleme geben wenn der Framebuffer-Treiber nicht geladen werden kann Da auch? Ich dachte, dass der Kernel nur dann in den Modus umschaltet, wenn der fb-Treiber schon geladen ist, und bei Problemen aufgibt und 80x25 benutzt. Naja, komplizierte Sache das. oder wenn der Monitor die Auflösung in der vorgegebenen Frequenz nicht schafft. Klar. (Beim OP hatte es offensichtlich mit dem selben Modus und anderem Kernel funktioniert.) Bei dem original Kernel von Debian sarge (2.6.8-3-386) funktioniert der MOdus vga=791 ohne Probleme. ich habe dann die original Quellen unter /usr/src ausgepackt den Link nach linux gesetzt und die Konfigurationsdatei aus /boot nach /usr/src/linux kopiert. Dann habe ich einige Anpassungen gemacht, die betreffen aber nicht die Framebuffer-Treiber oder ähnliche Komponenten. Hier die Liste: Der Debian-Kernel hat den vesafb-Treiber als Modul, aber soweit ich weiß ist das nur durch einen debianspezifischen Patch möglich, d.h. Du musst bei Deinem eigenen Kernel den Treiber fest einbauen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kernel Consolenauflösung
Hallo Klemens Kittan ([EMAIL PROTECTED]) wrote: Bei dem original Kernel von Debian sarge (2.6.8-3-386) funktioniert der MOdus vga=791 ohne Probleme. ich habe dann die original Quellen unter /usr/src ausgepackt den Link nach linux gesetzt und die Konfigurationsdatei aus /boot nach /usr/src/linux kopiert. Dann habe ich einige Anpassungen gemacht, die betreffen aber nicht die Framebuffer-Treiber oder ähnliche Komponenten. Hier die Liste: Der Debian-Kernel hat den vesafb-Treiber als Modul, aber soweit ich weiß ist das nur durch einen debianspezifischen Patch möglich, d.h. Du musst bei Deinem eigenen Kernel den Treiber fest einbauen. Mein Fehler mit original Quellen, habe ich die von Debian gemeint (kernel-source-2.6.8.tar.bz2). Diese Quellen pake ich nur aus und bau dann einen angepassten Kernel. Aus diesem Grund denke ich, das alle debianspezifischen Patche enthalten sind. Oder ist das nicht so? Es sollte so sein. Du solltest trotzdem sicherstellen daß in dem Fall der vesafb-Treiber entweder im Kernel ist oder (Standard- Debiankonfiguration) als Modul gebaut wurde, *und* in der initrd vorhanden ist. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kernel Consolenauflösung
Hallo Bjoern Schliessmann ([EMAIL PROTECTED]) wrote: Klemens Kittan wrote: ich habe ein Problem mit der Consolenauflösung bei einem selbtsgebauten Kernel. In der menu.lst habe ich den Parameter vga=791 eingetragen, wenn jetzt den Rechner starte habe ich keine Ausgaben auf dem Bildschirm. Keine? Normalerweise sollte der Kernel doch bei einem ungültigen Modus auf 80x25 zurückfallen? Es kann Probleme geben wenn der Framebuffer-Treiber nicht geladen werden kann - oder wenn der Monitor die Auflösung in der vorgegebenen Frequenz nicht schafft. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: lokaler User vs. Root
Martin Reising ([EMAIL PROTECTED]) wrote: On Thu, Sep 14, 2006 at 10:28:08AM +0200, Bjoern Schliessmann wrote: Jan Dinger wrote: Bei MD5 ist es doch so wenn ich das Passwort test verschlüssle, kommt bei MD5 immer das selbe raus. Shadow verwendet heutzutage praktisch nur noch MD5. AFAIK wird erst seit woody bei der Installation angeboten md5 statt crypt zu verwenden. *g* Das Woody rauskam ist ja auch /erst/ vier Jahre her. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: madwifi-tools für etch (amd64)
Hallo Martin Möller ([EMAIL PROTECTED]) wrote: ich bin einigermaßen aufgeschmissen. Ich habe mir eben ein frisches testing installiert und benötige für meine WLAN-Karte den madwifi-Treiber. madwifi-source lässt sich problemlos installieren, allerdings scheint für madwifi-tools momentan kein amd64-Paket zur Verfügung zu stehen. Das lässt mein System in einem unerfreulichen Zustand, da ich ständig ein Kabel quer durch die Wohnung legen muss. Langsam hasse ich WLAN. Das macgt nur Probleme. :-( Weiß jemand einen Weg, wie ich zu den madwifi-tools kommen kann? Testing/i386 installieren. Oder schauen ob man madwifi-tools in einem 32-Bit-Chroot verwenden kann. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Module Assistant Problem
Hello David Baron ([EMAIL PROTECTED]) wrote: Suddenly, never needed it before, m-a complains bad luck--cannot find kernel headers If I explicitely give it the --kernel-dir, works just fine. Have not changed the kernel directory since 2.6.17 came on line. What gives? What does your uname -r say, and what is the output of ls -l /usr/src regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Nvidia-Howto f. Kernel 2.6.16-2-686
Hallo Al Bogner ([EMAIL PROTECTED]) wrote: Am Sonntag, 30. Juli 2006 21:44 schrieb Andreas Janssen: Installier nvidia-kernel-source und bau das Modulpaket mit module-assistant. Alle benötigten nvidia-Pakete findest Du in non-free (ggf. unstable nehmen wenn Du testing benutzt). aptitude install nvidia-kernel-source ... Die folgenden Pakete sind KAPUTT: nvidia-kernel-2.6.16-2-486 [...] Die folgenden Pakete haben verletzte Abhängigkeiten: nvidia-kernel-2.6.16-2-486: Hängt ab: nvidia-kernel-common (= 20050829), welches ein virtuelles Paket ist. Resolving dependencies... The following actions will resolve these dependencies: Keep the following packages at their current version: nvidia-glx [Not Installed] nvidia-kernel-2.6.16-2-486 [Not Installed] nvidia-kernel-source [Not Installed] Score is 17 Accept this solution? [Y/n/q/?] Was nun? nvidia-kernel-2.6.16-2-486 ist ja kaputt. Entfernen, Du baust eh Dein eigenes Paket. Schau auch mit apt-cache policy nach woher die einzelnen Pakete kommen fallst Du Testing oder Unstable benutzt. nvidia-glx kannst Du übrigens erst installieren wenn Du ein passendes Modulpaket installiert hast, daher solltest Du das erst weglassen. Schau auch ob Du bei aptitude das Installieren von Suggests/Recommends aktiviert hast und ob das eventuell zu dem Problem führt. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Nvidia-Howto f. Kernel 2.6.16-2-686
Hallo Al Bogner ([EMAIL PROTECTED]) wrote: Ich habe den Nvidia-Thread nebenan schon gesehen, aber ich denke mein Thema ist doch ein anderes. Ich fand einige Howtos, zB http://home.comcast.net/~andrex/Debian-nVidia/installation.html , doch mir fehlt ein Repository für das Nvidia-Modul bzw. den Kernel. Der neueste Kernel bei meinen Repositories ist nvidia-kernel-2.6.14-2-686. Installier nvidia-kernel-source und bau das Modulpaket mit module-assistant. Alle benötigten nvidia-Pakete findest Du in non-free (ggf. unstable nehmen wenn Du testing benutzt). Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: nachfrage wegen Dynamic MMap ran out of room
Hallo nils reitnauer ([EMAIL PROTECTED]) wrote: hatte den error wie im titel gefixt durch eine erstellung der apt.conf mit dem eintrag: APT::Cache-Limit 301326592; Danach ein apt-get update .. OK http://ftp.de.debian.org sid/non-free Release OK http://security.debian.org etch/updates/non-free Packages OK http://security.debian.org etch/updates/non-free Release Paketlisten werden gelesen... Fertig debian:/etc/apt# Was mich hierbei wundert er ließt nur die packetlisten? Was ist mit dem abhänigkeitsbaum usw... was nach der ausgabe immer kam Paketlisten werden gelesen... Fertig?! Der fehlende Teil der Ausgabe gehört nicht zu apt-get update, sondern zu Befehlen die den Status von Paketen ändern, z.B. upgrade, dist-upgrade, install und remove. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: nachfrage wegen Dynamic MMap ran out of room
Hallo nils reitnauer ([EMAIL PROTECTED]) wrote: Andreas Janssen schrieb: nils reitnauer ([EMAIL PROTECTED]) wrote: .. OK http://ftp.de.debian.org sid/non-free Release OK http://security.debian.org etch/updates/non-free Packages OK http://security.debian.org etch/updates/non-free Release Paketlisten werden gelesen... Fertig debian:/etc/apt# Was mich hierbei wundert er ließt nur die packetlisten? Was ist mit dem abhänigkeitsbaum usw... was nach der ausgabe immer kam Paketlisten werden gelesen... Fertig?! Der fehlende Teil der Ausgabe gehört nicht zu apt-get update, sondern zu Befehlen die den Status von Paketen ändern, z.B. upgrade, dist-upgrade, install und remove. ok danke! Ehm ist dass nun reperapel oder ist es unbedeutend? Weder noch - der Punkt ist halt daß der Teil den Du vermisst bei apt-get update nicht erscheint, und das sicher nicht erst seitdem Du Deine Konfiguration geändert hast, sondern auch schon davor. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Meine WLan-Karte ist verschwunden.....
Hallo BoomX ([EMAIL PROTECTED]) wrote: heute ist misteriöser weise meine Netzwerkkarte verschwunden. dmesg spuckt auch nix mehr aus. wenn ich die eth1 starten will kommt auch nur das: Lappy:/home/sven# ifup eth1 Error for wireless request Set Mode (8B06) : SET failed on device eth1 ; No such device. Error for wireless request Set Encode (8B2A) : SET failed on device eth1 ; No such device. Error for wireless request Set Frequency (8B04) : SET failed on device eth1 ; No such device. Error for wireless request Set ESSID (8B1A) : SET failed on device eth1 ; No such device. SIOCSIFADDR: No such device eth1: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device eth1: ERROR while getting interface flags: No such device eth1: ERROR while getting interface flags: No such device Failed to bring up eth1. Meine Karte hat ein Prism nitro chip (fals es hilft). hat mal einer ein Gedankenanstoss wie ich da eine lösung finde um mein wlan wider ans rennen zu bekommen? dmesg | grep eth, ifconfig, iwconfig aufrufen schauen ob sich die Namen der Interfaces vielleicht verändert haben... Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Meine WLan-Karte ist verschwunden.....
Hallo BoomX ([EMAIL PROTECTED]) wrote: Am Donnerstag, den 27.07.2006, 22:25 +0200 schrieb Stefan Bauer: BoomX schrieb: wie schon gesagt. die karte ist beim betrieb verschwunden und kommt auch nicht wider. :( was sagt lspci ? H das kannte ich noch nicht... da spuckt der dann das aus.: :03:06.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) Das macht Hoffnung :) Als nächstes müsstest Du mal schauen ob das Kernelmodul für die Karte geladen ist (lsmod). In /proc/interrupts solltest Du auch mal nachschauen. P.S.: Antworten bitte nur an die Liste, nicht zusätzlich noch an mich persönlich Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Packete updateliste
Hallo Kai ([EMAIL PROTECTED]) wrote: also ich bin recht neu und meine liste ist nicht wirklich groß und ich habe mir gedacht ich könnte ein paar mehr gebrauchen weis aber nicht wie ich daran komme. Du brauchst nur einen offiziellen Debian-Spiegel (z.B. ftp.de.debian.org) und die Quelle für Sicherheitsaktualisierungen (security.debian.org). Für inoffizielle Quellen die Du sonst noch hinzufügst um neuere Pakete zu bekommen (z.B. backports.org) übernimmt Debian natürlich keine Verantwortung und Du bist dann bei Sicherheitslücken auf die inoffiziellen Quellen selbst angewiesen. zudem habe ich die vermutung das mein system da ich nicht wirklich viel zum upgraden und updaten hab ziemlich viele sicherheits lücken hat! Das ist eine ziemlich pauschale Aussage, die auch niemand kommentieren kann ohne zu wissen was für Pakete Du installiert hast, welche Debian-Version Du installiert hast (und wie!), und welche Updates denn nun genau vorgeschlagen wurden. Details findest Du aber auf http://security.debian.org. Außerdem solltest Du als Benutzer die Mailingliste debian-security-announce abonnieren, Mehr dazu findest Du auf http://lists.debian.org. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: iptables nach ipchaines portieren
Hallo Sven Hartge ([EMAIL PROTECTED]) wrote: Christian Frommeyer [EMAIL PROTECTED] wrote: Am Mittwoch 26 Juli 2006 18:24 schrieb Marco Estrada Martinez: Bei mir läuft aber (leider) ein 2.4 er Kernel genau dieser - Auch 2.4 sollte eigentlich iptables können. Da konnte man aber IIRC noch das als depreciated gekennzeichnete ipchains verwenden. Hmm, wie war das noch: 2.0: ipfwadm, ipmasqadm 2.2: ipchains 2.4: iptables 2.6 iptables oder ipchains, je nach Konfiguration Oder erinnere ich mich falsch? 2.4 kann auch ipchains, es gibt dafür ein Kompatibilitätsmodul. Ebenso ipfwadm. Bei meinem (aktuellen) 2.6er kann ich davon nichts mehr finden, frühere Kernel hatten das aber auch. Laut packages.debian.org haben unter anderem die 2.6.8er Pakete für Sarge noch ipchains.ko dabei, genauso wie ipfwadm.ko. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: dpkg-reconfigure
Hello Brent Clark ([EMAIL PROTECTED]) wrote: You know when you install debian and debconf a screen whereby you can add more sources to the sources.list file etc. Is there a dpkg-reconfigure option for that. No, the program used for that is apt-setup from the base-config package. It has however been removed from unstable and testing because as far as I know the configuration of your sources has been integrated into the Debian installer. also, apart from using dpkg -l to see what packages are installed. How would I know what software / packages I can use dpkg-reconfigure with. Is there a list somewhere or something You can use dpkg-reconfigure with any package, but for most it won't ask any questions. You can use debconf-get-selections from the debconf-utils package to find out which packages ask questions. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Why backports packages not deactivated
Hello T ([EMAIL PROTECTED]) wrote: I've been following the Debian Backports - Instructions at http://www.backports.org/instructions.html to use backports so as to _deactivate_ all packages from backports.org by default. No. You don't decativate them, you pin them to a lower priority than 500. 500 ist the default priority for packages available from some repository. This is the to-be-wrongly-updated package: $ apt-cache policy hplip-ppds hplip-ppds: Installed: 0.9.3-3 Candidate: 0.9.7-3bpo1 Version Table: 0.9.7-3bpo1 0 200 http://www.backports.org sarge-backports/main Packages ^^^ *** 0.9.3-3 0 100 /var/lib/dpkg/status ^^^ It will be automatically updated from sarge to backport. Why? It is upgraded because the installed version has a lower priority (100200). It has a lower priority because that version is not available in any archive. Probably because that version is outdated. By the way, where did you get it from? It is not part of stable. I recommend that you either upgrade or pin the installed version to 200. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Upgrade to 2.6.15
Hello John Talbut ([EMAIL PROTECTED]) wrote: I am using etch and it is up to date apart from the kernel. When I wanted to recompile the kernel I found information that suggested that I would need to upgrade to the 2.6.12 kernel. So I duly went looking for the kernel-source-2.6.12 package, only to find it nowhere in testing. Instead it seemed I needed to be using the linux-source-2.6.15 package. Yes. You need packages for 2.6.12 or newer. Older versions don't work with udev in etch, for example. Is this the right package for me to use? Yes. Why the change from kernel-source to linux-source? Probably because there are ports of debian that use other kernels, e.g. The Hurd and FreeBSD. Why is 2.6.15 the current stable kernel when only even numbered releases were supposed to be stable? The even number is the second number. 2.4 kernels are stable, 2.5 was a developement branch, 2.6 is stable (more or less ;-)) best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: apt-move archive not being picked up by apt
Hello Chris Stiles ([EMAIL PROTECTED]) wrote: I have the following cron job that runs nightly : /usr/bin/apt-get update /usr/bin/apt-get autoclean /usr/bin/apt-get -dy dist-upgrade /usr/bin/apt-move update /usr/bin/apt-get update This downloads updates currently needed, and puts them into an apt-move style archive in /usr/mirror, which is then picked up like so in sources.list: deb file:/usr/mirror/debian testing main However, even if a file exists in /usr/mirror, apt-upgrade will still tryn and download it. Check apt-cache policy packagename to see if your apt-move package source is listed. If it is, move it to a higher position in your sources.list and run apt-get update. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: What filesystems does LVM (lvm2?) support?
Hello Yu,Glen [Ontario] ([EMAIL PROTECTED]) wrote: I've googled this but never actually got a definite answer... What I want to know is: What filesystems does lvm (or lvm2) support? To the file system, LVM logical volumes look like normal block devices, e.g. partitions. You can use any file system on them that you want to use. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: What wireless cards are well supported in Linux?
Hello Magnus Therning ([EMAIL PROTECTED]) wrote: After cancelling a 7 month old order with one ISP I'm now fairly hopeful I'll have ADSL at the end of the week. :-) So it's time to start putting together a shopping list. The first item on it is a wireless card for my desktop. What I'm looking for is a card that is well supported in Linux. I refuse to use ndiswrapper, I simply don't want any unfree source in my kernel. I'm ignorant when it comes to wireless so any help/suggestions/comments are welcome. I use a Netgear WG311T and WG511T card (PCI and PCMCIA). Both are supported by the madwifi driver (atheros chip) and work with hostapd and wpa_supplicant. They support 802.11 a/b/g. Please note that the USB stick from the same product line uses another chipset. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Reihenfolge des Ladens von Modulen
Hallo Til Obes ([EMAIL PROTECTED]) wrote: [...] Mein Problem ist, dass das Modul e1000 vor dem Modul e100 geladen wird und somit eth0 die Gigabitkarte ist und eth1 die 100er. Vielleicht kann mir mal jemand erklären, wieso das so ist und an welcher Stelle die Netzwerkkartenmodule geladen werden. Für mich sieht das so aus, als wenn die vor allem anderen schon geladen werden. Also vor hotplug und /etc/modules. udev scheint es ja beim Standard Sarge Kernel noch nicht zu geben (?). Doch. Ob es bei Dir installiert ist weiß ich allerdings auch nicht. Das müsstest Du mal nachschauen. Lass auch mal ls -l /etc/rcS.d/*udev* laufen, und cat /etc/debian_version. Eine weitere Frage wäre ob Du eventuell Backports benutzt (apt-cache policy udev). Hier ein Auszug der Config. /etc/modules: [...] e100 [...] e1000 Für das Verhalten gibt es verschiedene Erklärungen. Eine wäre neueres udev (ersetzt hotplug, läuft aber früher als dieses), eine andere ist discover. Wenn Du einen eigenen Kernel benutzt kann das Problem auch auftreten wenn die Treiber in den Kernel gebaut sind und nicht als Module. Wenn alles nichts hilft solltest Du nameif oder ifrename benutzen und die Namen einfach an die MAC-Adressen binden. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: gcc 4.0.3 and kernel 2.6.8
Hello Glenn Meehan ([EMAIL PROTECTED]) wrote: It seems there is a bug with the kernel 2.6.8 that the new verison of gcc (4.0.3) has picked up. So I am now unable to make menuconfig: make menuconfig HOSTCC scripts/kconfig/mconf.o scripts/kconfig/mconf.c:91: error: static declaration of 'current_menu' follows non-static declaration scripts/kconfig/lkc.h:63: error: previous declaration of 'current_menu' was here make[1]: *** [scripts/kconfig/mconf.o] Error 1 make: *** [menuconfig] Error 2 If you google for this problem is seems many people are having the same problem. What is the best work-around to this problem. Should I upgrade my kernel to a newer version? If so which is the best version to upgrade to? I would like to stick to a kernel from the debian repository. You should first tell us which Debian version you use. If you use stable (which includes 2.6.8), use the default compiler (install the gcc package). If you use testing or unstable, I recommend you either explicitly use the older version of gcc (still available) or upgrade to a newer kernel (testing/unstable has 2.6.15 right now). The 2.6.8 kernel also has some compatibility problems with newer userspace programs like udev from testing/unstable. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: I can't compile mplayer
Hello Sed Nivo ([EMAIL PROTECTED]) wrote: I want compile mplayer with ./configure, but compiler not find bitypes.h. Install apt-file, run apt-file update and apt-file search bitypes.h best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: warning when upgrading xorg for testing
Hello Hans Vogelsberger ([EMAIL PROTECTED]) wrote: When apt-get upgraded xorg for Debian testing this afternoon (Central European Time), nvidia-glx was removed and no X showed up after next boot. This happened because nvidia-glx from testing is incompatible with xorg 6.9. You can install the nvidia or nvidia.*-legacy packages from unstable, depending on whether you have a card that is only supported by the legacy driver (GeForce 2 or older) or e newer card. I commented nvidia in /etc/X11/xorg.conf - Section Device - line Driver, uncommented nv in the following line, and rebooted, and X worked normal again. Only the letters seem slightly frayed on the screen. This is unimportant for youngsters of 73 or even below, but people like me must avoid dissension with their eye doctor. This could have several reasons. First you should run xdpyinfo | grep dim and check if the screen size X thinks you are using is correct. If not, add DisplaySize width height #width and height in mm to the monitor section of your /etc/X11/xorg.conf and restart X. After that at least the dpi value should be correct. If you still have problems, make sure xfonts.*-transcoded is installed. You probably also want to use AntiAliasing so smoothen the edges of your fonts. How you activate it depends on which window manager/desktop environment you use. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: WPA wie einrichten?
Hallo. Jochen Kaechelin ([EMAIL PROTECTED]) wrote: Am Sonntag, 12. Februar 2006 10:54 schrieb Dirk Salva: ich habe hier zwei WLAN-Karten: eine Elsa MC-11, die kann definitiv kein WPA, Gugsch Du: wpasupplicant - Client support for WPA and WPA2 (IEEE 802.11i) Wusste gar nicht, dass WPA von der Hardware abhängig isch! Ja, ist es. wpa_supplicant läuft darüber hinaus nicht mit allen WPA-fähigen Karten sondern nur einigen davon: http://hostap.epitest.fi/wpa_supplicant/ Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: installing packages from testing in sarge
Hello Martin Paraskevov ([EMAIL PROTECTED]) wrote: I am a newcomer to the list and have the following question to ask. I have recently installed debian sarge (the stable distribution) but when I search for mozilla-firefox with: apt-cache show mozilla-firefox I get an older version of the browser. 1. Can I install software from the testing distribution under sarge. In general: no, you can't. A lot of stuff from testing is incompatible to stable, and if upgrade some packages to testing, a lot of other stuff needs to be upgraded as well. You will end up with a mixed system, possibly more or less broken. For example if I add a line in the /etc/apt/sources.list file. Or do I have to upgrade to the testing etch. Either upgrade completely to testing (which I don't recommend if you don't know how to do it), or use stable and get updated packages of Firefox that were built for /your/ system. Take a look at http://www.backports.org, but read the instructions carefully. If you don't, you will accidentially install all the packages from there, instead of only those you want. 2. What command can I use in the shell to edit the /etc/apt/sources.list file but not manually but through interface. I think there was a tool like this but I don't remember what it was. You can use any text editor (e.g. nano, vi, vim, emacs), or run apt-setup. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: install linux-image-2.6.15-1-686
Hallo Wolfgang Egger ([EMAIL PROTECTED]) wrote: ich möchte von Kernel 2.6.8 nach 2.5.15 wechseln. Dazu hab ich, naiv wie ich bin ;-) , einfach versucht ein apt-get install auszuführen, was leider gescheitert ist. Kann jemand erkennen, wo das Problem liegt, bzw. wodurch es verursacht wird und was ich dagegen tun kann? [...] udev requires a kernel = 2.6.12, upgrade aborted. [...] Da steht eigentlich alles wichtige. Du brauchst neben dem Kernel auch ein aktuelles udev. backports.org hat beides. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html
Re: Fehlen in Debian 3.1r1 i386 Sicherheitsupdates?
Hallo Friedhelm Usenet Waitzmann ([EMAIL PROTECTED]) wrote: Mir ist klar, dass das letzte Debian-Security-Advisory, das in Debian 3.1r1 eingegangen ist, DSA-922 vom 2005-12-14 war. Also besorge ich mir die folgenden selbst, um mein Debian 3.1r1 auf aktuellem Stand zu halten. Nun habe ich aber mal spaßeshalber auf allen 3.1- und 3.1r1- CDs die zur Architektur i386 gehörenden Dateien Packages.gz ausgewertet, d.h. genauer, darin jeweils die Zeilen Filename: pool/... aufgesammelt, um so eine Übersicht aller vorhandenen Pakete Binär-Pakete zu bekommen. Das gleiche habe ich mit den Packages.gz unter http://security.debian.org/dists/sarge/updates/*/binary-i386/ getan. Dann war noch zu berücksichtigen, dass auf http://security.debian.org/ die Paketpfade mit pool/updates/... beginnen. Also habe ich eben mit sed aus Filename: pool/updates/ Filename: pool/ hergestellt, damit ich die Möglichkeit habe, Paketpfade zu vergleichen. Dabei stelle ich fest, dass auf http://security.debian.org/ pool/updates/contrib/b/bluez-utils/bluez-bcm203x_2.15-1.1_i386.deb (empfohlen durch DSA-782 vom 2005-08-23, also weit vor Veröffentlichung von 3.1r1!) vorhanden ist, auf den 3.1r1-CDs jedoch fehlt. 1. werden nicht immer alle Pakete aufgenommen, insbesondere dann wenn es zu Inkompatibilitäten kommen kann (Kernel der mit extern gebauten Modulen nicht mehr läuft usw.). Hier eine Übersicht: http://people.debian.org/~joey/3.1r1/ http://people.debian.org/~joey/3.1r2/ 2. Fehlen auf den CDs/DVDs grundsätzlich alle Pakete aus non-free und die meisten aus contrib, sofern diese ohne non-free nicht installierbar sind. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Debian 3.1 und Nessus - missing GTK+ ???
Hallo Niels Jende ([EMAIL PROTECTED]) wrote: ich wollte mir zwecks Netzwerkprüfung und eigener Netzpenetration Nessus installieren. Das hat an und für sich auch geklappt, ABER es gab eine Fehlermeldung die mich doch arg stutzig machte. Nessus meckerte rum, dass er die GTK+ Libs nicht finden kann und somit kein Nessus ohne GUI installiert wurde. Die GTK`s sind aber da, zumindest werden wenn ich apt-get install GTK keine installiert, weil APT sagt, dass alle GTK - relevanten Files installiert sind! Ich nehme an Du hast versucht Nessus selbst zu kompilieren? Wenn ein Programm eine Bibliothek benutzen soll und Du es kompilierst, dann musst Du nicht nur die Bibliothek installieren, sondern auch die Headers aus dem dazugehörigen -dev-Paket, z.B. libgtk1.2-dev für GTK1, oder libgtk2.0-dev für GTK 2.x. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Netzwerkdevice konfiguration
Hallo Klemens Kittan ([EMAIL PROTECTED]) wrote: ich möchte meine Madriva Installation auf Debian 3.1 umstellen. In einigen Rechnern habe ich zwei Netzwerkkarten. Damit alles richtig funktioniert muss ich die Netzwerkdevices tauschen. Unter Mandriva konnte ich einfach in /etc/modprobe.conf die Einträge tauschen: alias eth0 3c59x alias eth1 e1000 An welcher Stelle kann ich es unter Debian tun? Ich habe in der Datei /etc/modutils/aliases die Einträge gemacht und danach update-modules aufgerufen. Leider startet der Rechner immernoch mit dem falschen Device. Der alias-Kram funktioniert nur dann, wenn zu dem Zeitpunkt wo das Netzwerk gestartet wird die Treibermodule noch nicht geladen sind. Dann werden sie in der Reihenfolge geladen wie die Interfaces gestartet werden (/etc/network/interfaces). Da Debian die Module von hotplug, udev oder discover vorhger laden lässt brauchst Du eine andere Lösung, nämlich entweder: - Die Module in gewünschter Reihenfolge in /etc/modules eintragen - ifrename oder nameif benutzen und den Namen an eine Eigenschaft der Karte, z.B. MAC-Adresse, koppeln Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Weshalb keine Antwort?
Hallo Jörn Franke ([EMAIL PROTECTED]) wrote: mittlerweile hab' ich zweimal versucht zu erfahren warum CDCEther mir kein eth-device anlegt bzw. wie ich den Treiber dazu überreden kann. Hab' ich was falsch gemacht, oder weshalb bekomme ich keinerlei Rückmeldung? Ich denke es liegt einfach daran daß niemand eine Antwort parat hat. Du könntest aber trotzdem mal sagen was lsusb und dmesg nach dem Einstecken und nach dem Laden des Treibers sagen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html
Re: gpg key error in unstable
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: On 2/9/06, Andreas Janssen [EMAIL PROTECTED] wrote: You can get official debian keys from the debian-archive-keyring package. Never just download keys from some gpg server just because someone tells you some key id, only get the keys from the project servers directly, or at least get the key id from there to make sure it is the correct key. I have both sid and sarge on my dell 600m. In sid I could get debian-archive-keyring. But in sarge that is not there. I installed apt from bacports in sarge. How to get debian-archive-keyring for sarge? Either you get it from backports.org, or from unstable/testing, or you download the keys manually from the Debian ftp-master server: http://ftp-master.debian.org/ziyi_key_2006.asc best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: udev is ruining my life
Hello Mitchell Laks ([EMAIL PROTECTED]) wrote: Now we cant upgrade debian provided kernels beyond 2.6.11 without udev? Why is this a prerequisite?? I can install my own kernel without it. Of course you can. Debian kernels (even 2.6.15) work fine without udev and don't depend on it. What you can't do is: 1. try to make kernels = 2.6.12 work with udev from sarge 2. install hotplug and udev at the same time (unless both is from sarge) 3. keep your hotplug configuration files around after it was removed when your udev package gor upgraded (you are told so during udev installation). Purge the hotplug package. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: gpg key error in unstable
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: I have sarge system. I use other repositories like http://ftp.nerim.net, http://ftp.debian-unofficial.org, http://www.backports.org. I upgraded apt to 0.6.43. it needs gpg keys for all. I went to nerim and saw merillat key. I did lvgdell600m:~# gpg --armor --export 1F41B907 | apt-key add - gpg: directory `/root/.gnupg' created [...] gpg: WARNING: nothing exported gpg: no valid OpenPGP data found. ^^^ even then I got warning during apt-get update. then I tried lvgdell600m:~# gpg --keyserver hkp://wwwkeys.eu.pgp.net --recv-keys 1F41B907 gpg: requesting key 1F41B907 from hkp server wwwkeys.eu.pgp.net gpg: /root/.gnupg/trustdb.gpg: trustdb created gpg: key 1F41B907: public key Christian Marillat [EMAIL PROTECTED] imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 gpg: imported: 1 even now I got warning during apt-get update what to do? The first time you tried to export the key from gpg to apt, but you didn't have the key in your gpg keyring. The second time, you imported the key to gpg, but didn't feed it to apt. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: gpg key error in unstable
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: On 2/9/06, Andreas Janssen [EMAIL PROTECTED] wrote: The first time you tried to export the key from gpg to apt, but you didn't have the key in your gpg keyring. The second time, you imported the key to gpg, but didn't feed it to apt. Thanks Andreas. Clear explanation. How to get keys for various sites? You can get official debian keys from the debian-archive-keyring package. Never just download keys from some gpg server just because someone tells you some key id, only get the keys from the project servers directly, or at least get the key id from there to make sure it is the correct key. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Testing distribution question
Hello Jiri Palecek ([EMAIL PROTECTED]) wrote: I have a question about when can a package enter testing, particularly when does it break other packages. I could imagine that, for example: packages A can be added to testing, packages U upgraded and R removed if for any debian system, upgrading packages in U and removing packages in R doesn't yield any broken packages (that is, unmet depends or conflicts) However, this has flaws. Imagine the situation, in which there are packages A and B, previously unrelated, and a new version of A is coming in and it Conflicts: B. In that case, systems having both A and B will have to remove one. Is that OK? Yes. Obviously the new package requires you to remove either one. This happend with recet hotplug and udev versions. This is okay as long as the new package has correct dependencies that make sure the conflicting packages are removed. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 200 GO Festplatte auf AMD 500
Hallo Klaus Becker ([EMAIL PROTECTED]) wrote: Le Dimanche 5 Février 2006 10:45, Jan Luehr a écrit : Am Sonntag, 5. Februar 2006 10:32 schrieb Klaus Becker: ich möchte einem Freund einen alten Rechner schenken, die CPU ist ein 6 Jahre alter AMD 500, die Hauptplatine weiß ich gar nicht mehr. Kann ich diesen Rechner mit einer 200 GO Festplatte (auf der ich Sarge installieren möchte) ausstatten oder muss ich befürchten, dass diese Festplatte nicht erkannt wird, da zu groß? Wovon hängt das ab, von der Hauptplatine? Ja. So lange aber nur Sarge darauf laufen soll, müssen aber nicht 200GB erkannt werden. Linux hat seine eigenen IDE Treiber. Du meinst, Sarge erkennt die 200 GB (ich meinte GB, in Frankreich, wo ich wohne, spricht man von GO), auch wenn das BIOS sie nicht erkennt? Und wie ist das mit anderen Linux-Distributionen, z. B. Mandriva, und Windows? Bei Windows weiß ich es nicht. Linux-Distributionen erkennen die Größe der Platte über den Kernel, Dir sollte also die volle Kapazität zur Verfügung stehen. Lediglich booten kannst Du von dieser Platte nicht, wenn das BIOS nicht die volle Größe erkennt und kein LBA48 unterstützt. In diesem Fall benötigst Du ein Boot-Medium auf dem sich der Kernel befindet, oder ein BIOS-Update, falls es für den Rechner noch eines gibt. Kommt das alles nicht in Frage musst Du auf eine Platte mit maximal 128/137 Gbyte ausweichen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: gpg key error in unstable
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: [...] lvgdell600m:~# apt-key update [GPG keys succesfully imported] However after this I tried to install adept, I got error once again as below. vgdell600m:~# apt-get install adept [...] WARNING: The following packages cannot be authenticated! libtdb1 debtags adept Install these packages without verification [y/N]? Where am I going wrong? Did you run apt-get update? Also check where the package comes from (apt-cache policy debtags adept libtdb1). best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: missing X font
Hello [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote: When I run startx, I get the following error: Fatal server error: could not open default font 'fixed'; the X server's font paths might be misconfigured, remote font server(s) may be unreachable, and/or local fonts may not be installed or are not configured correctly. Install x-window-system-core, that should pull all necessary fonts, libraries and so on. If the package is installed, try reinstalling the xfonts.*-packages. Make sure that you have the necessary FontPath entries in your X configuration file. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: blaclisting i810_audio
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: I have installed sid in my dell inspiron 600m. both i810_audio and alsa modules are being loaded. I have put skip i810_audio in /etc/discover.conf and added i810_audio in /etc/modprobe.d/blacklist. Still i810_audio is getting loaded. What are I have to do to get rid of it. This should happen automatically if you install the alsa-base package. It you use kernel 2.6 and udev, also make sure you purge the hotplug package as you were told during the udev installation (dpkg --purge hotplug). If the module still gets loaded, activate the bootlog daemon (/etc/default/bootlogd) and use `less /var/log/boot` after booting to find out which service is responsible for the module being loaded. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Kernel Compilation
Hello Roman Kouzmenko ([EMAIL PROTECTED]) wrote: I've managed after some work to install debian on my new Dell machine (ICH7 controller + SATA): I debootstrapped the system from Knoppix and then installed the latest kernel 2.6.15-1-686-smp from the backports with initramfs-tools. I need to recompile it to add support for some hardware (not relevant here). Unfortunately, it seems that I can't even recompile the 2.6.15-1-686 kernel with the same configuration my machine uses. The step I'm making: apt-get install linux-source-2.6.15 unpack the sources, go to kernel sources directory copy /boot/config-2.6.15-1-686 to .config = This is when you should have run make oldconfig to apply the new configuration from your Debian Kernel. make bzImage = And this is where I suggest you use kernel-package/make-kpkg instead, e.g. `fakeroot make-kpkg --revision 1.0 kernel_image`. This will create a Debian package with the kernel and modules in /usr/src. Use dpkg -i to install it. make modules make modules_install I copy the bzImage and System.map to boot, generate an initrd.img file using initramfs -o /boot/initrd.img and then reboot the machine with the new initrd image and bzImage. The system reports it can't find my root device /dev/sda1 (which is SATA on ICH7) Did you reconfigure your bootloader accordingly? Did you tell it where the initrd is? Btw, if you use kernel-package, this will be done automatically. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ndiswraaper install error
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: I have dell inspiron 600m. today I have loaded base sarge and upgraded to unstable. I have installed linux-source and ndiswrapper-source. I tried to get modules using info on wiki You don't need (and shouldn't use) the linux-source package. It does not have what you need to build modules for the running kernel. To use the source, you must configure it using the config file from your kernel, and change the Makefile to macht your kernel version. You need the linux-headers-`uname -r` package instead, it was made for compiling modules. Luckily you already installed it. lrwxrwxrwx 1 root src19 2006-02-04 12:32 linux - linux-source-2.6.15 Remove this symlink, and remove /usr/src/linux-source-2.6.15 as well. Then run module-assistant prepare and m-a auto-install ndiswrapper. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: X-Server
Hello Lothar Droll ([EMAIL PROTECTED]) wrote: i try to install debian 3.1r1 for 4 times. That's silly. One time is sufficient in your case. Every time with the same error. The x-server will not start. I tryed differend things (vga, vesa...) without any differences. Run dpkg-reconfigure xserver-xfree86 instead of reinstalling. Select the nv driver, and do say yes to using the kernel framebuffer. Make sure you configured your monitor and mouse correctly. Set your keyboard to pc105, not pc104. If you still habe problems, post all lines starting with (EE) from /var/log/XFree86.0.log. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: blaclisting i810_audio
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: # Wireless... (this section may or may not already exist) allow-hotplug wlan0 iface wlan0 inet dhcp this takes care for ifplugd. If I remove hotplug, what should I have here in place of allow-hotplug ? I don't know, but you should try to purge hotplug and see if udev can do this. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: gpg key error in unstable
Hello L.V.Gandhi ([EMAIL PROTECTED]) wrote: I have dell inspiron 600m. today I have loaded base sarge and upgraded to unstable. I wanted to avoid the error Install these packages without verification. Hence as per info in debian-admin site I did as follows. apt-get install gnupg Once that's done you can either download the public key by running: [EMAIL PROTECTED]:~# gpg --keyserver keyring.debian.org --recv 4F368D5D secring.gpg is shown as 0 byte file [EMAIL PROTECTED]:~# cat ziyi_key_2006.asc | gpg --import I tried this also. Still I get error as mentioned above. What should I do? You need to run apt-key, e.g. apt-key add ziyi_key_2006.asc Of course this only works /after/ you installed apt from testing/ustable. You can also install the debian-archive-keyring package and run `apt-key update`. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Missing public keys in aptitude
Hello Daniel B. ([EMAIL PROTECTED]) wrote: Florian Kulzer wrote: David Kirchner wrote: On 2/2/06, Andreas Janssen [EMAIL PROTECTED] wrote: man apt-secure, man apt-key Neither are found on my Sarge install, and I don't see them in aptitude. Probably because you use Sarge, and apt in Sarge doesn't check the GPG signatures of the Release files. It only checks the md5sums of the Package files (which are stored in the Release file). If you use Sarge (without backported apt from somewhere else!), this problem shouldn'd occur, because not only apt-key, but the whole GPG stuff is not implemented in your apt. debmirror seems to be a different issue, however. It looks like debmirror from Sarge /does/ check GPG signatures, and you probably can solve the problem by importing the matching keys using gpg. Install the 2006 archive signing key. This has been explained plenty of times on the list, search the archive if you need a longer explanation. I've been watching the list, reading most of these threads. I've seen plenty of people having trouble with it but few solutions. Can you send a link to the archived post that includes a solution? The original message by Joey Hess: http://lists.debian.org/debian-user/2006/01/msg00291.html That is not a link that includes a solution--that message says to use the command apt-key, which, as David pointed out, does not exist in Sarge. David also didn't say /he/ had the problem. By the way, if you take a closer look, you will see that the OP in the thread mentioned above uses unstable. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Questions on Securing Debian Howto
Hello nddias ([EMAIL PROTECTED]) wrote: I am setting up a Debian (sarge) webserver to run over my home DSL connection. I've been using my best common sense and a whole lot of googling to follow along with the Securing Debian Howto, but I still have some questions/need clarifications on some points. The numbers in parentheses refer to the sections of this guide: http://www.debian.org/doc/manuals/securing-debian-howto/ 4.2 Executing a security update Is the NAT/firewall in my wireless router (WEP enabled) sufficient protection when doing the security update during installation? NAT is sufficient, as long as you don't forward new connections from the outside into your local network. By the way, NAT may be sufficient, WEP is not. Switch to WPA if you can, and use a good and long passphrase. 4.2.2 Security update of the Kernel I recompiled and installed a 2.6.8 kernel w/ local APIC support disabled because I was getting spurious interrupt messages. I also enabled Athlon support. Will apt/dpkg still be able to detect when kernel updates are necessary according to this section? Or am I on my own to maintain my custom kernel? If you install your own kernel, you are on your own. apt can however detect when a new version of the kernel-source package is available. I also recommend that you use kernel-package/make-kpkg to build your kernel, or (as someone already mentioned) use a Debian kernel and switch off APIC using the noapic boot option. 4.9.1, 4.9.2 These sections refer to modifying apt.conf, but this file doesn't exist...instead there is an /etc/apt/apt.conf.d directory and in it a 70debconf file. I can't find any docs on how this directory structure works or the proper way to modify it. The apt man page says that apt first reads the file in APT_CONFIG but this env var is not set. I have found plenty of docs on using apt, but none on configuring it. Simply create apt.conf, or create your own file in /etc/apt/conf.d. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: finding packages w/o packages.debian.org
Hello Jason Majors ([EMAIL PROTECTED]) wrote: With packages.debian.org down, how can I find out which packages contain certain files? I need to get: libcrypt3.so.2 libstdc++-libc6.2-2.so.3 libssl.so.2 libXm.so.3 But can't figure out where they are. Install apt-file, run apt-file update and then search for each file using apt-file search filename best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: k3b in etch?
Hello Chris Howie ([EMAIL PROTECTED]) wrote: Joseph Smidt wrote: It looks like k3b has been sitting in unstable never moving to testing. Is k3b going to be in Etch or is Debian holding it back for a reason? k3b in unstable is compiled against the KDE 3.5 libs, and testing only has 3.4. You'll have to wait until 3.5 makes it to testing. Or use k3b and libk3b2 0.12.10-1 from http://snapshot.debian.net, the last versions from unstable build for KDE 3.4. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Missing public keys in aptitude
Hello Paolo Pantaleo ([EMAIL PROTECTED]) wrote: When I update package list (with u) in aptitude I get a lot of error like: GPG error http://ftp.debian.org the following signatures have not been verified because the public key is not available NO_PUBKEY some numbers I read something about apt-secure, but I didn't fin the aswer... What shall I do to fix this problem? man apt-secure, man apt-key Install the 2006 archive signing key. This has been explained plenty of times on the list, search the archive if you need a longer explanation. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: k3b in testing
Hallo Dirk Schleicher ([EMAIL PROTECTED]) wrote: gibt es in testing im Moment kein k3b? Nein, schon seit langem nicht. Wenn nein, wo kann ich deb's her bekommen ohne selbst zu bauen? http://snapshot.debian.net Du brauchst Version 0.12.10-1 von k3b und libk3b2. Gibt es einen backport? Ich weiß keinen, außer alten unstable-Paketen die noch gehen. Oder kann ich es auch aus unstable nahemen? Aktuell nicht, weil die Pakete in unstable schon für KDE 3.5 neu gebaut wurden, in Testing ist aber noch 3.4. Wenn ja, kann mir jemanden die Vorgehensweise erklären wie ich nur k3b dann aus unstable ziehen kann. DefaultRelease auf testing setzen, unstable zur sources.list hinzufügen, gewünschte Pakete entsprechend pinnen. Siehe `man apt_preferences`, `man apt.conf` und apt-doc. Nützt Dir aber wie gesagt in diesem Fall nichts. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: dependency hell dist-upgrade the right way
Hello Rodney Richison ([EMAIL PROTECTED]) wrote: Since, lately, I've had a coupla systems give he all kinds of hell. I'm curious if you guys have some hints to do a fresh install the right way? Including upgrading to unstable or testing. Both end up in kde dependency hell. Installing sarge choosing no packages, then dist-upgrading, then install kde doesn't work. Why? kde dependency hell. (Once you get past the udev bug and the locales bug) So, maybe my methodology is wrong. I run unstable on this box I'm on and don't remember having trouble doing so.. Works just fine as it always has in the past. I've never before had such problems upgrading as I have lately. Testing and unstable both seem to have some problems.. Anyone do a fresh install the last week or two that's worked for them? Hints? There have been some C++ Transitions in the past, also a lot of additional software for KDE is not in Testing. Some have or had RC bugs, and they can't migrate now from unstable because the unstable packages have already been built for KDE 3.5. KDE itself in testing should however be OK. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian Server minimal backup - was sichern?
Hallo Lars Schimmer ([EMAIL PROTECTED]) wrote: Gegeben sei ein LoginServer mit einer 20 GB System HD. Die Homes der User sind auf einem AFS Filesystem im Netz, ergo nur root hat lokalen Account und home. Jetzt möchte ich diesen Server so ins Backup schieben, daß ich ihn nach einem Ausfall schnell und möglichst komplett wieder von 0 aus aufziehen kann. Und dieses vor allem schnell und möglichst komplett OHNE ein Vollbackup vorzunehmen. Idee: 1. dpkg --get-selections Installed.packages.txt ins Backup für die Pakete 2. /etc/ sichern für die Konfigurationen 3. /var/ sichern für Logfiles/ spool von manch Paket (hylafax z.b.) Bei HD Crash dann sarge installieren, dpkg --set-selections und /etc/ und /var/ einspielen. Habe ich etwas wichtiges vergessen? Wenn Du zusätzlich zu dpkg --get-selections noch debconf-get-selections benutzt (Paket debconf-utils), und die Werte vor dem apt-get dselect upgrade wieder einspielst, bleiben Dir auch die ganzen debconf-Fragen bei der Neuinstallation erspart. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Probleme mit Debian 3.1r0a und DSL
Hallo Michael Lansche ([EMAIL PROTECTED]) wrote: [DSL geht nicht] (http://learn.to/quote) debian:~# /etc/init.d/networking restart Setting up IP spoofing protection: rp_filter. Reconfiguring network interfaces.../etc/network/interfaces:12: interface eth0 declared allow-auto twice Na dann schau doch mal nach was in Zeile 12 drinsteht. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Fwd: Re: Probleme mit Debian 3.1r0a und DSL
Hallo Michael Lansche ([EMAIL PROTECTED]) wrote: [DSL geht nicht] hat niemand noch eine Idee, was ich noch falsch mache? [...] -- Weitergeleitete Nachricht -- [langes TOFU] Doch. 1. Du machst das Threading kaputt 2. Du zitierst falsch (http://learn.to/quote) 3. Du bist ungeduldig - das hier ist keine Supporthotline 4. Du musst Deine /etc/network/interfaces reparieren und dringend mal `man interfaces` lesen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: poweroff can't power off the power
Hello linux china ([EMAIL PROTECTED]) wrote: My debian 3.1 celeron machine can't be powered off when I run the poweroff command, I had the same issue when I use other old distrubution Linux system many years ago but fixed by system update. Now I switched to Debian 3.1yesterday, and have the same very old issue again. But I don't know which package the bug is in, so I have no idea what to do next. If you have an older system that doesn't support ACPI, you need to load the apm module. Use echo apm /etc/modules modprobe apm or install the apmd package. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: apt-get invalid signature again
Hello Ross Boylan ([EMAIL PROTECTED]) wrote: Starting last night I see W: GPG error: http://localhost sarge/updates Release: The following signatures were invalid: BADSIG F1D53D8C4F368D5D Debian Archive Automatic Signing Key (2005) [EMAIL PROTECTED] The old 2005 key has been replaced, did you import the new key for 2006 already? best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Probleme mit Debian 3.1r0a und DSL
Hallo Michael Lansche ([EMAIL PROTECTED]) wrote: gestern habe ich von Analogmodem auf DSL umgestellt. Unter SuSE 9.2 sollte ich laut Anleitung des Routers eine Verbindung zu 192.168.0.1 (DHCP Server) herstellen und mit YaST bei den NetzwerkeinstellungenDHCP aktivieren, danach hat alles funktioniert. Unter sarge erhalte ich mit pppoeconf folgende Meldung. Das Problem ist das Du überhaupt kein PPPOE benutzt, sondern einfach ein normales Ethernet, das Dich mit dem Router verbindet. Also musst Du Dein Ethernet-Interface entsprechend einstellen. Wenn das eth0 heißt sollte folgendes in der /etc/network/interfaces funktionieren: auto eth0 iface eth0 inet dhcp Du kannst auch etherconf installieren und das benutzen (dpkg-reconfigure etherconf), um Dein Netzwerk einzustellen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Wie Debian-CD mit Sicherheits-Updates von Paketen erstellen?
Hallo Friedhelm Usenet Waitzmann ([EMAIL PROTECTED]) wrote: ich habe auf einer Maschine, die selbst nicht am Netz hängt, Sarge laufen. Ich habe es von CDs installiert. Um, was die Systemsicherheit angeht, auf dem Laufenden zu bleiben, beobachte ich (von einem anderen Rechner aus) die Sicherheitsgutachten von Debian und lade mir die dort jeweils empfohlenen neueren Paketversionen herunter. Weil ich auch nach solchen Updates das System komplett von CDs neu installieren können möchte, möchte ich mir selbst inoffizielle Update-CDs erzeugen, d.h. im Vorgriff auf ein irgendwann mal erscheinendes Debian 3.1 r2. Wer kann mich darüber aufklären, wie das geht? Ich habe das Paket debian-cd gefunden. Gibt es dafür eine Anleitung für den Neuling? Ich habe früher einfach mit apt-move ein Archiv aus den heruntergeladenen Dateien erstellt. Den Dateibaum habe ich auf CD kopiert und diese dann zusätzlich zu den vorhandenen CDs als weitere Installationsquelle einlesen lassen. Wenn ich mich richtig erinnere musste/konnte ich das Label beim Einlesen von Hand eingeben, das lässt sicher ändern (ich weiß aber nicht wie). Wenn die Rechner in einem Netzwerk zusammenarbeiten käme eventuell auch eine Netzwerkfreigabe (z.B. Web oder FTP, apt-proxy oder apt-cacher) in Frage. Die kannst Du bei der Installation als Quelle angeben. Pakete Deiner CDs kannst Du mit geeigneten Werkzeugen (apt-proxy-import bei apt-proxy) in das Archiv importieren. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: kde status in Etch
Hello H.S. ([EMAIL PROTECTED]) wrote: Andreas Janssen wrote: Your only chance is to find old versions on http://snapshot.debian.net. You need: ^^ k3b and libk3b2 0.12.10-1 amarok and amarok-engines 1.3.7-1 kaffeine and kaffeine-xine 0.7.1-1.3+b1 So, coming back to your suggestion, where do I go looking for older version(s) of K3b? See above. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Running a remote graphic program
Hello Alejandro Salas ([EMAIL PROTECTED]) wrote: Can someone tell me or point me in the right direction of what I have to do in order to run a remote program with graphics?. I have ssh access and everything, I suppose it has something to do with the DISPLAY variable, but I'm not sure of exactly what to do. You need: - a runnig x server on the ssh client - xbase-clients installed on the ssh server - X forwarding activated on the ssh server (man sshd_config) - X forwarding not disabled on the ssh client (man ssh_config, ssh -X) best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: X startet nicht nach Kernel-Update!!!
Hallo Steven Breuer ([EMAIL PROTECTED]) wrote: 1.)Ich habe meinen Kernel von 2.4.27-2-386 auf 2.6.8-2-686 geupdatet. Mittels apt-get install kernel-image-2.6.8-2-686. Nach einem Neustart (Grub enthält nun beide Kernel-Versionen) ist das nVidia-Sympol dreimal auf meinen Bildschirm aufgeleuchten und das X-Server wurde mit eine Fehlermeldung (Log siehe unten) abgebrochen. 2.) Daraufhin habe ich den nVidia Treiber neu installiert. Mittels module-assistant auto-install nvidia-kernel. 3.)Habe ich sh NVIDIA-Linux-x86-1.0-8178-pkg1.run ausgeführt Damit hast Du zwei inkompatible Versionen des Treibers (nämlich 7xxx aus den Debian-Paketen und 8xxx aus dem Nvidia-Installer) vermischt. Entferne beide komplette und installier dann einen von beiden neu, am besten die Debian-Pakete. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: kde status in Etch
Hello H.S. ([EMAIL PROTECTED]) wrote: Okay, I did an upgrade but have lost two major things (among others), vlc and k3b. What version of k3b do you have? Sorry, but there /is/ no k3b in etch, and there /won't/ be any k3b in etch until KDE in etch is upgraded from 3.4 to 3.5. Until about a week ago, there would have been an chance to get all the additional KDE packages (amarok, kaffeine, k3b) from unstable, because unstable had the same KDE version that was in etch, but you obviously missed the chance. If you want to upgrade to the latest KDE in etch, you need to deinstall nearly all KDE programs that are not part of KDE itself. Getting those packages from unstable is also not an option, because those packages are simply not compatible. Your only chance is to find old versions on http://snapshot.debian.net. You need: k3b and libk3b2 0.12.10-1 amarok and amarok-engines 1.3.7-1 kaffeine and kaffeine-xine 0.7.1-1.3+b1 I don't know about vlc, so you probably will have to do some search on your own. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Simple aptitude/apt question
Hello Hugh Crissman ([EMAIL PROTECTED]) wrote: How do I exclude a package when doing a upgrade. Say Postfix for example. I want to update all the packages on my system but I don't want to update Postfix. How would I do that? You can set the package to hold usind aptitude or dselect or dpkg --set-selections. You can also use pinning to set packages to a specific version (see man apt_preferences). best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: kde status in Etch
Hello H.S. ([EMAIL PROTECTED]) wrote: Ryan Nowakowski wrote: H.S. wrote: I apologize if this is a vague query. I have been patiently waiting for more than a couple of months now (I believe) to update KDE in Etch. I just did a full upgrade 3 days ago and kde 3.5 works fine. Yes, but you use unstable, and the OP wants to use Etch (testing). best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ALSA And Flash-- how do I make them play together?
Hello Keith Bates ([EMAIL PROTECTED]) wrote: After re-installing and re-configuring ALSA, I have all my normal sound sources (xine, xmms) working well but I can't get any sound from flash in my browser (both Firefox and Opera). I did have them working previously, so there's probably some setting I've mixed. Make sure that alsa-oss is installed. Check if your card can allow several applications (sound server, browser) to access the card at the same time. If it doesn't, you need to activate the dmix plugin for software mixing. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: X startet nicht nach Kernel-Update (was: Nach kernel-update System down [HILFE]!!!)
Hallo stevenbreuer ([EMAIL PROTECTED]) wrote: ich habe meine Debian 3.1.r1 von 2.4.27-2-386 auf 2.6.8-2-686 geupdatet und was soll ich sagen, das System ist down. Wenn ich ganz normal booten lasse, erscheint dreimal mein nVidia-Anfangsbildschirm und dann kommt eine Fehlermeldung, dass der X-Server nicht geladen werden kann. Ich habe dann meinen nVidia installiert, so wie ich sie unter der alten Version auch zum Laufen bekommen habe, aber dass funktioniert nicht. Erstmal ist Dein Betreff falsch, denn das System ist nicht down, es läuft. Lediglich X lässt sich nicht starten. Du musst natürlich den Nvidia-Kerneltreiber passend zum neuen Kernel bauen. Ob Du das korrekt gemacht hast ist aus Deiner Problembeschreibung nicht ersichtlich, Du schreibst nichtmal wie Du den Treiber installiert hast (Debian-Pakete oder Installer von Nvidia). Außerdem fehlt der entscheidende Teil Deines X-Logs, indem genau steht warum X nicht starten kann. Diese Informationen musst Du nachliefern. Beim X-Log reichen die entscheidenden Zeilen am Ende und alles mit (EE), bitte nicht einfach alles in eine Mail kopieren und abschicken. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Linux kernel 2.6.14 headers
Hello Antonio Rafael C. Paiva ([EMAIL PROTECTED]) wrote: I was trying to install the VMware player in my computer but it needs to compile a few modules specifically to my kernel (2.6.14), so I was wondering if anyone knows of a repository where I can get the package. I tried to use other kernels but they fail to configure property my ethernet connection, this is why I need to stick with this one. Kernel 2.6.14 is not part of Debian anymore. Install 2.6.15 if you use unstable. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ssh keys
Hello Juraj Fedel ([EMAIL PROTECTED]) wrote: [ssh server] How do you enable root login if they are disallowed? Juraj Change PermitRootLogin no to PermitRootLogin yes in your /etc/ssh/sshd_config. However I recommend you don't log in as root directly, instead only allow logins for users, and use sudo or something similar. best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: etch: Sound und ACPI-Problem(chen)
Hallo Ricardo Leese ([EMAIL PROTECTED]) wrote: On Fri, 20 Jan 2006 20:39:03 +0100, Andreas Janssen [EMAIL PROTECTED] wrote: Ich habe also ppp_async und ppp_deflate in /etc/modules eingetragen, dann wird auch automatisch ppp_generic geladen, connecten will er immernoch nicht. ifconfig eth0 sagt folgendes: eth0Protokoll:Ethernet Hardware Adresse 08:00:46:67:AF:9D BROADCAST MULTICAST MTU:1500 Metric:1 [...blabla , alle sonstigen Werte auf Null, außer [Sendewarteschlangenlänge auf 1000 ...] /etc/network/interfaces: # Kommentare auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp provider dsl-provider [4x folgendes (wohl weil ich pppoeconf 4x ausgeführt habe?)] auto eth0 iface eth0 inet manual Streich das doch mal raus. Was passiert denn wenn Du von Hand pon dsl-provider aufrufst? Steht nichts im syslog? Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Übersicht interfaces wlan einträge
Hallo Dirk Schleicher ([EMAIL PROTECTED]) wrote: wo kann ich eine Übersicht finden, in der alle Befehle mit Beschreibung aufgeführt sind, die man für wlan eintragen kann. Ich konnte leider nur x configs von anderen im Internet finden, aber keine Beschreibung. Das sind im allgemeinen Befehle, die per iwconfig ausgeführt werden, daher sollte `man iwconfig` Dir da weiterhelfen. Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Problems after upgrade to udev - can't start X
Hello Richard L. Halpert ([EMAIL PROTECTED]) wrote: I recently upgraded from sarge to etch, and I ran into a problem that seems to be related to udev. During the upgrade, hotplug was removed and udev was installed. Then you also read the message that told you to purge the hotplug package. Did you do that? Afterwards, I received the following error message when trying to log in (via gdm): Error creating the child process for this terminal. If I revert back from udev to hotplug, the problems subside. I really want to make the transition to udev so that I can use the latest version of gnome-volume-manager. It seems one or two people have experienced similar symptoms, but the fixes they used didn't help me at all. Can you start X by running `startx` from the command line? best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ssh keys
Hello José Pablo Ezequiel Fernández ([EMAIL PROTECTED]) wrote: I've installed my ssh public keys to various servers. All worked untill a case which didn't work. A server named dev, I installed the key on [EMAIL PROTECTED]:/home/pupeno/.ssh/authorized_keys and it worked (I can connect to [EMAIL PROTECTED] using the key), I copied the same key to /root/.ssh/authorized_keys of that same computer and I can't connect to [EMAIL PROTECTED] using the key. Are root logins allowed on the server? What does the server's auth.log say? best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: get to know upgraded pkg version
Hello linux china ([EMAIL PROTECTED]) wrote: I plan to upgrade my perl 5.6 to 5.8, how to query if 5.8 is available in the mirror site in a command? apt-cache policy packagename man apt-cache best regards Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 1x Firefox starten ergibt 5x Firefox in der Prozessliste?!?
Hallo Dirk Salva ([EMAIL PROTECTED]) wrote: On Sun, Jan 22, 2006 at 12:10:03AM +0100, Sven Hartge wrote: 2.4 und die dazugehörigen psutils stellen Threads einens Prozesses als einzelne Prozesse dar, während 2.6 hier geschickter vorgeht und bei Threaded Prozessen die Infos anders ausgibt, so dass Utilities dies entsprechend auswerden können. Das kannst du unter 2.6 auch simulieren, wenn du Firefox z.B. vom Terminal so lädst: LD_ASSUME_KERNEL=2.4.0 firefox Bitte auch http://people.redhat.com/drepper/assumekernel.html lesen. Ah, danke! Ist das auch der Grund, warum die DVD-Laufwerke (welche ich mit ide-scsi anspreche) je 7x erscheinen?!? Das hat wohl mit einer Kerneloption zu tun (und kann wenn ich mich richtig erinnere mit der Bootoption max_scsi_luns=1 geändert werden). Alternativ könntest Du natürlich auch auf ide-scsi verzichten (und falls Du auch ohne brennen willst auf Kernel 2.6 wechseln). Grüße Andreas Janssen -- Andreas Janssen [EMAIL PROTECTED] PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
