Re: foss-north 2024
Tjena, Just nu så vet vi inte - vi har en call-for-papers ute - men tar gärna emot andra förslag. Vi hade exempelvis ett Debian bug-squashing-party som var populärt innan pandemin. MVH Johan Thelin Recommended on-line reading: http://www.thelins.se | http://www.foss-gbg.se Recommended off-line reading: The Foundations of Qt Development (ISBN: 1-59059-831-8) On Fri, Jan 26, 2024 at 8:16 AM Luna Jernberg wrote: > > Skickar din fråga vidare till huvudarrangören av konferensen > men gissar att flera talare kommer läggas till efter tid, då det > fortfarande går att ansöka om att bli/vara en talare tills 5:e Mars > (mingla med folk i Lunch och kaffepausen) men låter Johan Thelin > huvudarrangör ge dig ett mer officiellt svar > > Jag själv tänkte bara dyka upp som vanlig besökare och eventuellt göra > något Debian aktigt i år då jag inte kunde förra året, men tänker nog > gå i år > > -- Forwarded message - > Från: Olof Hansson > Date: fre 26 jan. 2024 kl 08:13 > Subject: Sv: foss-north 2024 > To: Luna Jernberg > > > Hej > > Vore kul, men inga talare ännu? Finns det mer att göra kanske än att > lyssna på talare? > > Hälsningar > Olof > > Från: Luna Jernberg > Skickat: den 25 januari 2024 21:19 > Till: debian-nordic ; Swedish > ; debian-dug-nordic > ; interesserte > ; debian-user-finnish > ; Luna Jernberg > ; debian-user-danish > ; debian-user-swedish > ; debian-user-norway > ; FOSS-sthlm > ; foss-gbg ; > foss-...@cool.haxx.se > Kopia: Johan Thelin > Ämne: foss-north 2024 > > Hejsan! > > https://foss-north.se/2024/index.html > > Datum och biljettförsäljning för foss-north 2024 i Göteborg i mitten > av April 2024 har nu startat > > Någon som har tänkt att göra något på foss-north i år? > Funderar på att åka dit IRL för första gången i år (då jag inte har > kunnat tidigare år pga COVID och personlig anledning) men i år ska det > nog bli av
Re: Re: No upgrade from 11.3 to 11.4 with apt update/upgrade
Hi Klaus, thank you but dist-upgrade had the same result. '~# rm -R /var/lib/apt/lists/*; apt update; apt upgrade' worked. Still don't know what was wrong... Thanks again Johan
Re: Re: Re: No upgrade from 11.3 to 11.4 with apt update/upgrade
Thank you very much! 2) ~# rm -R /var/lib/apt/lists/* did the trick! Btw: 1) That's not Ubuntu but the Signal desktop client and the correct repository. Confuses me all the time as well.
Re: Re: No upgrade from 11.3 to 11.4 with apt update/upgrade
Sorry, that was misunderstandable. I run apt update/apt upgrade daily. ~# date; cat /etc/apt/sources.list;apt update; apt upgrade; apt-cache policy base-files Do 4. Aug 13:25:38 CEST 2022 deb https://deb.debian.org/debian-security bullseye-security main contrib non-free deb-src https://deb.debian.org/debian-security bullseye-security main contrib non-free deb https://deb.debian.org/debian/ bullseye main non-free contrib deb-src https://deb.debian.org/debian/ bullseye main non-free contrib #deb http://deb.debian.org/debian/ bullseye main non-free contrib #deb-src http://deb.debian.org/debian/ bullseye main non-free contrib deb http://security.debian.org/debian-security bullseye-security main contrib non-free deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free deb https://deb.debian.org/debian/ bullseye-updates main contrib non-free deb-src https://deb.debian.org/debian/ bullseye-updates main contrib non-free deb https://deb.debian.org/debian/ bullseye-backports main contrib non-free deb-src https://deb.debian.org/debian/ bullseye-backports main contrib non-free OK:1 http://security.debian.org/debian-security bullseye-security InRelease OK:2 http://packages.microsoft.com/repos/code stable InRelease OK:3 https://updates.signal.org/desktop/apt xenial InRelease OK:4 https://deb.debian.org/debian-security bullseye-security InRelease OK:5 https://deb.debian.org/debian bullseye InRelease OK:6 https://dl.google.com/linux/chrome/deb stable InRelease OK:7 https://packages.microsoft.com/repos/microsoft-debian-bullseye-prod bullseye InRelease OK:8 https://deb.debian.org/debian bullseye-updates InRelease OK:9 https://deb.debian.org/debian bullseye-backports InRelease Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt: linux-image-5.10.0-14-amd64 Verwenden Sie »apt autoremove«, um es zu entfernen. 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. base-files: Installiert: 11.1+deb11u3 Installationskandidat: 11.1+deb11u3 Versionstabelle: *** 11.1+deb11u3 500 500 https://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status Hope, this is complete enough.
No upgrade from 11.3 to 11.4 with apt update/upgrade
Hi, I think I am missing something minor but I don't get it. My sources.list is: deb https://deb.debian.org/debian-security bullseye-security main contrib non-free deb-src https://deb.debian.org/debian-security bullseye-security main contrib non-free deb https://deb.debian.org/debian/ bullseye main non-free contrib deb-src https://deb.debian.org/debian/ bullseye main non-free contrib #deb http://deb.debian.org/debian/ bullseye main non-free contrib #deb-src http://deb.debian.org/debian/ bullseye main non-free contrib deb http://security.debian.org/debian-security bullseye-security main contrib non-free deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free deb https://deb.debian.org/debian/ bullseye-updates main contrib non-free deb-src https://deb.debian.org/debian/ bullseye-updates main contrib non-free deb https://deb.debian.org/debian/ bullseye-backports main contrib non-free deb-src https://deb.debian.org/debian/ bullseye-backports main contrib non-free apt update; apt-cache policy base-files gives me: base-files: Installiert: 11.1+deb11u3 Installationskandidat: 11.1+deb11u3 Versionstabelle: *** 11.1+deb11u3 500 500 https://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status Shouldn't base-files (11.1+deb11u4) be already installed automatically? Thank you Johan
Package selection for bugreport (suspend, BIOS option, Interrupt remapping)
Hi, my system (Thinkstation c20) does not wake up from suspend to ram when "Interrupt remapping" is enabled in BIOS. Took me some time to find the problem and I wanted to report a bug. Towards which package should I report it? System is Buster. Regards Johan
Question about changed logout behavior.
Hi there, since starting using testing a month or so ago my xsession behavior (I pressume) seem to have changed. I get logged out automatically after exiting 'X'. I actually read that one person experienced the same thing about a week ago. Debian user, used testing and within the same time-frame as me. I can't remember where but first-hand guesses: reddit, stackoverflow or something like it. I've looked for it again, but can't find it. Sorry. I'm not really sure where to go next and I'm I suspect that it's an intentional change in some package. I guess next in line would be that I need to configure something and lastly a bug. I still have no idea what package is involved however. I've scraped the bottom of the barrel regarding search engines, conf-files, etc. I've guessed and read any leads I could find. Initial culprits I suspected: xsession, bash as login shell, systemd-logind and my login scripts. I stopped when I reached threads and the like over a decade old. My scripts are basic and I don't do anything fancy. See bottom for an edited outline of my '.xinitrc' file. My dot-files sets system editor and a few basic standard things. 'shopt' rules. Right from the documentation. I use 'dwm', my routine is to start 'X', from the command-line after login with the supplied 'startx' script. I don't use any scripts to start 'X' automatically and the reason is that I tend to do a little manual housekeeping at logout. Sometimes before I start 'X'. Definitely if I'm troubleshooting. Sometimes I want to start 'X' briefly and logout again. So I want the previous behaviour. The 'unclutter'-part refers to this, not the repo one: https://github.com/Airblader/unclutter-xfixes. My scripts contain program options, output redirections and things that would clutter '.xinitrc'. If they don't execute they fork to the background or get killed off. Basic stuff. Nothing that deals with the 'xsession' itself that I can deduce by myself. ``` /* Display settings */ xrdb ~/.Xresources xset r rate 350 40 slstatus & ~/.fehbg & nm-applet & /* Needed to do automatic backups, also stopped working btw */ /usr/lib/deja-dup/deja-dup-monitor & numlockx & ~/uptime.sh ~/touchpad-conf & /* One thing I think might be related to session itself, starts redshift at night if conditions are met */ ~/redshift.sh /* 'unclutter' maaay be be dealing with the session in some way */ unclutter -b --timeout=6 --jitter=350 --ignore-scrolling xscreensaver -no-splash & ``` --- Med vänlig hälsning, Johan T-Katiska. pgpygFnSa7Pa6.pgp Description: OpenPGP digital signature
Question about changed logout behavior.
Hi there, since starting using testing a month or so ago my xsession behavior (I pressume) seem to have changed. I get logged out automatically after exiting 'X'. I actually read that one person experienced the same thing about a week ago. Debian user, used testing and within the same time-frame as me. I can't remember where but first-hand guesses: reddit, stackoverflow or something like it. I've looked for it again, but can't find it. Sorry. I'm not really sure where to go next and I'm I suspect that it's an intentional change in some package. I guess next in line would be that I need to configure something and lastly a bug. I still have no idea what package is involved however. I've scraped the bottom of the barrel regarding search engines, conf-files, etc. I've guessed and read any leads I could find. Initial culprits I suspected: xsession, bash as login shell, systemd-logind and my login scripts. I stopped when I reached threads and the like over a decade old. My scripts are basic and I don't do anything fancy. See bottom for an edited outline of my '.xinitrc' file. My dot-files sets system editor and a few basic standard things. 'shopt' rules. Right from the documentation. I use 'dwm', my routine is to start 'X', from the command-line after login with the supplied 'startx' script. I don't use any scripts to start 'X' automatically and the reason is that I tend to do a little manual housekeeping at logout. Sometimes before I start 'X'. Definitely if I'm troubleshooting. Sometimes I want to start 'X' briefly and logout again. So I want the previous behaviour. The 'unclutter'-part refers to this, not the repo one: https://github.com/Airblader/unclutter-xfixes. My scripts contain program options, output redirections and things that would clutter '.xinitrc'. If they don't execute they fork to the background or get killed off. Basic stuff. Nothing that deals with the 'xsession' itself that I can deduce by myself. ``` /* Display settings */ xrdb ~/.Xresources xset r rate 350 40 slstatus & ~/.fehbg & nm-applet & /* Needed to do automatic backups, also stopped working btw */ /usr/lib/deja-dup/deja-dup-monitor & numlockx & ~/uptime.sh ~/touchpad-conf & /* One thing I think might be related to session itself, starts redshift at night if conditions are met */ ~/redshift.sh /* 'unclutter' maaay be be dealing with the session in some way */ unclutter -b --timeout=6 --jitter=350 --ignore-scrolling xscreensaver -no-splash & ``` --- Med vänlig hälsning, Johan T-Katiska. pgpezXam4pxgT.pgp Description: OpenPGP digital signature
Re: gtk problem after update
I changed the gtk3 icon theme and problem is solved On Fri, Sep 28, 2018 at 6:17 PM deloptes wrote: > Johan DS wrote: > > > .local/share/icons/Papirus-Dark/ > > is this in the home of the new user? may be copy or check where it is > coming > from (which application) > >
Re: gtk problem after update
I created an new user and yup everithing just seems to work fine I'm one step closer to nirvana regards On Fri, Sep 28, 2018 at 11:09 AM deloptes wrote: > Johan DS wrote: > > > > /home/jods/.local/share/icons/Papirus-Dark/16x16/actions/image-missing.svg: > > No such file or directory (g-io-error-quark, 1) > > it looks obvious. for whatever reason it is looking for this file and can > not find it. > > Why is it looking in your .local - no idea. Thanks God I do not use GTK and > debian testing. > > It looks like XDG related, so just wondering if you can try with fresh > user. > > regards > >
gtk problem after update
Hi After an update of debian testing several days ago some applications crash. Its clearly a gtk error. for example mousepad: (mousepad:4203): Gtk-WARNING **: 10:33:25.001: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** Gtk:ERROR:../../../../gtk/gtkiconhelper.c:494:ensure_surface_for_gicon: assertion failed (error == NULL): Failed to load /home/jods/.local/share/icons/Papirus-Dark/16x16/actions/image-missing.svg: Error opening file /home/jods/.local/share/icons/Papirus-Dark/16x16/actions/image-missing.svg: No such file or directory (g-io-error-quark, 1) [1]4203 abort mousepad I googled reinstalled some applications, tried some stuff but nothing seems to work. Anybody an idea? thanks
Something eating diskspace in Testing
hi I have testing installed with a separete /Home partition. My root partition /dev/sda2 is slowly filling up. In a few hours it goes from 7GB to 15GB. Until there is no more space. I used ncdu. And also did ls and finds for big files and/or directories . But I can not find a file or directory that eats up space. Any body a clou?
Re: how to config wireless card
https://wiki.archlinux.org/index.php/Wireless_network_configuration On Fri, Jan 13, 2017 at 2:28 AM, Long Windwrote: > below is output by iwconfig > which command should I use? > > lono wireless extensions. > > eth3 no wireless extensions. > > wifi0 IEEE 802.11-DS ESSID:"" > Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated > Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=0/65535 > Retry limit:16 RTS thr:off Fragment thr:off > Encryption key:off > Power Management:off > Link Quality=0/100 Signal level=-113 dBm Noise level=0 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > eth4 IEEE 802.11-DS ESSID:"" > Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated > Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=0/65535 > Retry limit:16 RTS thr:off Fragment thr:off > Encryption key:off > Power Management:off > Link Quality=0/100 Signal level=-113 dBm Noise level=0 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >
Who changed
Hi I use the who command in my .zlogin for counting how many times I'm logged in. who | awk '$1 == "'$USER'"' | wc -l previously the output was something like user tty1 user pts/2 so user was 2 times logged in However the who output seems to be changed in: NAME LINE TIME IDLE PID COMMENT EXIT system boot 2017-01-03 15:56 user - tty1 2017-01-03 15:58 01:521067 run-level 5 2017-01-03 15:59 pts/22017-01-03 17:22 14868 id=ts/2 term=0 exit=0 Does anybody knows an alternative so I can count my loggins again Thanks
Installer un serveur appach
Bonjour la liste, Nouveau sur cette liste est débutant sur les linux, je souhaiterais installer un serveur apache. Pouvez-vous me donner la procédure ? Par avance merci. Envoyé de mon iPhone
Re: Mini-debconf in Stockholm
Hi, Sounds like fun. If we want to do it in the western suburbs (e.g. Gothenburg) I can help coarranging. Regards, Johan On Sun, Jul 3, 2016 at 3:06 PM Luna Jernberg <hackerbit...@googlemail.com> wrote: > Sounds cool will try to come if i have time, depending on when it is > and so on, also the real actual Debconf has started now > https://twitter.com/DebConf/status/748943897968185344 > > On 7/1/16, Helio Loureiro <he...@loureiro.eng.br> wrote: > > Hi, > > > > A new Debian anniversary is coming and we didn't do so much last year. > > > > Lets try to have a mini-debconf this year, w/ speakers and install fest? > > > > BRs, > > Helio Loureiro > > http://helio.loureiro.eng.br > > http://br.linkedin.com/in/helioloureiro > > http://twitter.com/helioloureiro > > http://gplus.to/helioloureiro > > > > -- --- Johan Thelin Recommended on-line reading: http://www.thelins.se | http://www.foss-gbg.se Recommended off-line reading: The Foundations of Qt Development (ISBN: 1-59059-831-8)
Re: (OT?) Någon som känner till någon "smartphone" med Debian eller åtminstone Linux?
Annars finns ju Sailfish OS från Jolla. Inte Debian, men ändå fri Linux. Sedan ska man ju inte glömma att Android är Linux. Det handlar väl mest om att roota och sedan installera rätt saker (och undvika rätt saker) för att kunna använda en Androidlur som linuxsystem. MVH Johan On Feb 21, 2016 22:20, "Per Andersson" <avtob...@gmail.com> wrote: > 2016-02-20 21:39 GMT+01:00 <j...@lillahusetiskogen.se>: > > Min halvsmarta telefon dog drunkningsdöden i veckan så jag behöver en > > ny telefon och skulle gärna se att det var Debian i den. Det får gärna > > kosta. > > Det närmsta du kommer med modern hårdvara är nog Ubuntu Phone. > > Annars fanns ju Nokia N900, som du säkert kan köpa begagnad, men > den är rätt daterad programvarumässigt. > > > -- > Per > >
Re: Euro Teken
Blijkbaar hangen de compose keys af van de locale in dat geval kun je dpkg-reconfigure locales doen Maar als ik het goed begrijp heb je een US keyboard layout en wil je een "AltGr €" doen? 2016-01-04 20:14 GMT+01:00 Paul van der Vlis <p...@vandervlis.nl>: > Op 04-01-16 om 20:05 schreef Johan DS: > > bijv. > > setxkbmap -layout "be" > > Daarmee zet je alleen de taal lijkt me, niet de indeling. Er zijn > bijvoorbeeld vele verschillende US layouten. > > > Dit kun je ook in > > kun je in commandline doen > > mischien ook eens zoeken in de archlinux wiki > > https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg > > Het lijkt me verstandiger in de Debian wiki te kijken. Het gaat immers > om Debian. Alhoewel, de documentatie van Archlinux is vaak erg goed! > > Groet, > Paul. > > > > > -- > Paul van der Vlis Linux systeembeheer Groningen > https://www.vandervlis.nl/ > >
Re: Euro Teken
bijv. setxkbmap -layout "be" Dit kun je ook in kun je in commandline doen mischien ook eens zoeken in de archlinux wiki https://wiki.archlinux.org/index.php/Keyboard_configuration_in_Xorg 2016-01-04 18:47 GMT+01:00 Paul van der Vlis: > Op 04-01-16 om 18:39 schreef Danny Evers: > > Hallo, > > > > Ik heb het /etc/default/keyboard configuratie bestand als volgt > aangepast: > > > > /# KEYBOARD CONFIGURATION FILE// > > // > > //# Consult the keyboard(5) manual page.// > > // > > //XKBMODEL="pc105"// > > //XKBLAYOUT="us"// > > //XKBVARIANT="deadkeys"// > > //XKBOPTIONS="compose:rwin, lv3:ralt_switch"// > > // > > //BACKSPACE="guess"/ > > > > ik wilde het volgende bereiken: > > > > Layout us-internationaal > > met dodetoetsen > > de rechter windows toets als 'composekey' > > de rechter alt toets als 'Alt Gr' toets. > > > > Heb toen opnieuw opgestart maar zonder het gewenste resultaat. > > > > Wat heb ik verkeerd gedaan? > > > > Hoe kan ik 'shift' + 'Alt Gr' als composekey instellen? > > Ik doe dat normaal in de GUI van de desktop-omgeving en niet in > configuratie bestanden. Ik ken echter LXDE niet goed, heeft dat geen > tooltje? > > Verder is er wellicht een commandline tooltje om het toetsenbord in te > stellen. Even snel gezocht, blijkbaar kun je "dpkg-reconfigure > keyboard-configuration" doen, en dan daarna "service keyboard-setup > restart": > https://wiki.debian.org/Keyboard > > Die toetsenbord indeling die ik noemde gebruikt eigenlijk geen dode > toetsen, al is het wel mogelijk via alt-gr. Echt een fijne indeling. > > Groet, > Paul. > > > > > -- > Paul van der Vlis Linux systeembeheer Groningen > https://www.vandervlis.nl/ > >
Re: File Management, How to List All
For duplicates install fdupes On Sun, Jan 3, 2016 at 5:49 PM, raywrote: > I would like to better manage my files to manage duplications and versions. > > On Windows, I use a VBA module in Excel; execute in a specific directory > and it records all files along with the path, size, type, dates. On Debian > 8.2, an ls -al -R gives the data but the output prints a directory and all > the files under that directory. Capturing this as text list all the files > but the path is not recorded from each file. With so many directories, it > is not reasonable to edit this by hand. > > So I am wondering what would be some good methods for recording my file > system data so it may be used programmatically. I like doing this is a > spreadsheet as I can sort and filter, drag and copy, drag and iterate, and > programmatically build large scripts. > > As Linux has a lot of tools not available in Windows, I do not want to > limit solutions to spreadsheets and databases; I am open. > > Thanks in advance, > Ray > >
Re: sudo does not respond to settings in /etc/sudoers
Did you check the permissions? -r--r- 1 root root 1011 Oct 4 21:58 /etc/sudoers On Sun, Nov 15, 2015 at 5:27 PM, Ric Moorewrote: > On 11/15/2015 11:18 AM, Joe wrote: > >> On Sun, 15 Nov 2015 10:44:10 -0500 >> Ric Moore wrote: >> >> On 11/14/2015 03:01 PM, Joe wrote: >>> Your example will >>> still ask for a password, and anyway it's either/or: you can either add yourself to the sudo group or add your name to sudoers, you don't need both. >>> >>> I had to, before it would work. YMMV, Ric >>> >>> >>> >> You must have an unusually paranoid computer. I have a sid workstation >> and wheezy server running at the moment, neither of which has any >> members of the sudo group, which I think is a relatively recent >> innovation in Debian. >> >> It might be one of those situations where 'I did A and it didn't work, >> I did B and it didn't work, I did C and it finally did work, and I was >> so relieved that I could get on with the job that was being held up that >> I didn't take the time to go back and undo A and B'. We've all been >> there, and have bits of mostly harmless cruft here and there to prove >> it... >> > > I just installed fresh, after a stinkin' seagate drive failed miserably, > and had to do both steps before sudo would work. It's become automatic to > do A and B to get C. But then again, I've never reversed the process to see > if A or B could be omitted. Maybe I'm scared. Ric > > > > -- > My father, Victor Moore (Vic) used to say: > "There are two Great Sins in the world... > ..the Sin of Ignorance, and the Sin of Stupidity. > Only the former may be overcome." R.I.P. Dad. > http://linuxcounter.net/user/44256.html > >
Re: post-up in interfaces doesn't work
On 29/07/15 18:06, Mojtaba wrote: Hello I have a brand new jessie setup in a KVM VPS. The server is in OVH network which needs manual routing applied. However the post-up and setting in the /etc/network/interfaces is not executed This is my interfaces file auto eth0 iface eth0 inet static address 198.50.210.32 netmask 255.255.255.255 broadcast 198.50.210.32 #gateway192.99.39.254 post-up route add 192.99.39.254 dev eth0 post-up route add default gw 192.99.39.254 post-down route del 192.99.39.254 dev eth0 post-down route del default gw 192.99.39.254 I've tried a simple 'echo working /testfile.txt' line but the post-up or pre-up is not executed Is there anything I'm missing? Thanks The following config should do the same but without the post-up/down statements: auto eth0 iface eth0 inet static address 198.50.210.32 netmask 255.255.255.255 pointopoint 192.99.39.254 gateway 192.99.39.254 (Do note the spelling of pointopoint) As to why the post-* commands doesn't run, I have no idea. Regards, Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/55b9129e.80...@ogun.org
Re: HTML5 i SVT
On Sun, Jun 21, 2015 at 04:13:12PM +0200, Rolf Edlund wrote: Den 21 juni 2015 16:02 skrev Johan Andersson j...@i19.se: verkar som de bara funkar i safari på osx/iOS med html5 spelaren dom har nu. Har för mig att Safari har stöd för HLS ? Korrekt Rätt. Apple är dom som skapade HLS. vore lite konstigt om det inte fanns stöd :) men men blir spännande och se hur de funkar med DASH. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150621142022.GD30980@debian
Re: HTML5 i SVT
On Sun, Jun 21, 2015 at 03:26:17PM +0200, Rolf Edlund wrote: Hej! För den ev instresserade.. SVT kommer nästa vecka (v.26), att lägga upp en ny HTML5 spelare. Som gör att dom som har har Firefox v.40 eller senare, kunna spela upp med DASH. Vilket innebär att jag/vi nu kan skrota Flash spelaren. Källa på det? dom har haft stöd för HTML5 sedan länge med HLS (via inställningar) -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150621133736.GB30980@debian
Re: HTML5 i SVT
verkar som de bara funkar i safari på osx/iOS med html5 spelaren dom har nu. On Sun, Jun 21, 2015 at 03:56:15PM +0200, Rolf Edlund wrote: Var nyss inne på Tittarservice hemsida, och hittade där deras egen info om det. http://www.svt.se/tittarservice/fraga-oss/dialog/848358 Eftersom Iceweasel i Jessie ligger några versioner bakom FF, så får vi antagligen vänta några år till, innan Iceweasel är uppe i version 40. Så du menar att du kan se SVT i HTML5, med FF eller Iceweasel. Hur ? Det fungerar iaf inte för mig. Den 21 juni 2015 15:37 skrev Johan Andersson j...@i19.se: On Sun, Jun 21, 2015 at 03:26:17PM +0200, Rolf Edlund wrote: Hej! För den ev instresserade.. SVT kommer nästa vecka (v.26), att lägga upp en ny HTML5 spelare. Som gör att dom som har har Firefox v.40 eller senare, kunna spela upp med DASH. Vilket innebär att jag/vi nu kan skrota Flash spelaren. Källa på det? dom har haft stöd för HTML5 sedan länge med HLS (via inställningar) -- Johan Andersson -- /Rolf -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150621140230.GC30980@debian
Re: libdvdccs ?
On Tue, Jun 02, 2015 at 03:32:46AM +0200, Rolf Edlund wrote: Hej! I sista mailet från Nussbaum i Debian Devel Announce.. https://lists.debian.org/debian-devel-announce/2015/04/msg6.html .. så nämner han att libdvdccs och ZFS snart kan släppas i Debian repron. Någon som har inside information när det kan tänkas ske ? Närmaste timman, veckan, månaden året, eller vad ? Hoppas dom även kommer att släppas direkt under stable (: horsestable :), så det inte bara blir under sid. Här är vad han skriver i mailet om detta: Libdvdcss and ZFS soon in Debian? == We received legal advice from Software Freedom Law Center about the inclusion of libdvdcss and ZFS in Debian, which should unblock the situation in both cases and enable us to ship them in Debian soon Jag vet att jag kan fixa detta på annat sätt, men att nu kunna fixa det direkt i Debian vore helt perfekt. Vet inte riktigt om libdvdcss kommer att komma med om man läser https://lists.debian.org/debian-devel/2015/04/msg00202.html To distribute some mechanism to avoid copy protection such as DRM is illegal in Japanese law (Unfair Competition Prevention Act) since 2012. It means that putting libdvdcss package into Debian repository causes problems in Japan, and most of organization that provides Debian mirror will _stop_ mirroring for Debian. Maybe libdvdcss is okay in other area, but not here in Japan. vore lite tråkigt om dom inte kan ha speglar hos sig. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150602083725.GA30980@debian
Re: video codec
On Sun, Feb 01, 2015 at 03:42:48PM +0100, j...@lillahusetiskogen.se wrote: Hej! Idag råkade jag ut för ett videoformat VLC inte stödjer. Jag som trodde att VLC sväljer allt. Banshee ville inte heller men upplyste mig om att jag behöver en codec för video/x-gst-fourcc-hvc1. Lite sökning på nätet gav magert resultat, det verkar som om hevc och x265 är någon sorts synonymer till hvc1. Och nu avslöjade jag möjligen status på mina kunskaper om media filer. Har någon något tips? x265 är en hevc kodare. :D problemet du ser är nog för att VLC kan inte spela upp filen på grund av att libavcodec versionen i stable saknar stöd för H265 / HEVC. Om du kör VLC i testing så borde du kunna spela upp filen iom dom använder libav v11 libavcodec56. HEVC / H265 kom i version v10 mvh. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150201150321.GA6778@debian
Re: Inte se på SVTPlay
On Sun, Sep 07, 2014 at 11:44:05AM +, Michael Kjörling wrote: On 6 Sep 2014 20:52 +0200, from rolfew...@gmail.com (Rolf Edlund): Den 6 september 2014 20:07 skrev Johan Andersson j...@i19.se: Finns det en lösning på problemet, utan att som sagt installera något som är ofritt ? Du kan använda https://github.com/spaam/svtplay-dl för att tanka videon och kolla på de med din mediaspelare. Tack tack för tipset! Nu kanske jag också kan få ut något av att betala TV-licens... (har en gammal tjock-TV för att titta på inspelade filmer, som bekant struntar ju Radiotjänst högaktningsfullt i att den är oanvändbar som TV-_mottagare_ i dagens Sverige.) Tror det blir lite problem, när man kikar på en direktsändning. Men annars är det ett bra tips. Plockade precis hem senaste versionen från github. Den har en parameter `--live' som kanske kan vara värd att prova? Den funkar inte riktigt så. det är en grej som är kvar från när dom körde rtmp baserad video. Står även om man läser texten till att det är för rtmp baserad video.. vissa siter som kör rtmp måste man skicka med det argumentet för att få hem videon. om man inte skickar med den så startas rtmp videon om om om igen efter ett par sekunder. fixa in live stöd är planerat men andra saker har tyvärr kommit ivägen. -- Johan 'spaam' Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140907114846.GB4013@debian
Re: Inte se på SVTPlay
On Sun, Sep 07, 2014 at 03:15:55PM +0200, Rolf Edlund wrote: Den 7 september 2014 13:48 skrev Johan Andersson j...@i19.se: Den funkar inte riktigt så. det är en grej som är kvar från när dom körde rtmp baserad video. Står även om man läser texten till att det är för rtmp baserad video.. vissa siter som kör rtmp måste man skicka med det argumentet för att få hem videon. om man inte skickar med den så startas rtmp videon om om om igen efter ett par sekunder. Se där, då funkar inte det (än). fixa in live stöd är planerat men andra saker har tyvärr kommit ivägen. Låter bra! Föresten, är det du som skapat programmet ? Javisst är det så. :) -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140907142636.GC4013@debian
Re: Inte se på SVTPlay
On Sat, Sep 06, 2014 at 08:04:54PM +0200, Rolf Edlund wrote: Försöker se på SVTPlay utan att instalera något ofritt program. Det går där att välja HTML5, men det funkar inte hos mig, Eller så kan jag instalera ett ofritt program, och då funkar det som det ska. Har provat Gnash, men den verkar vara för gammal version, för att fungera med SVTPlay. Finns det en lösning på problemet, utan att som sagt installera något som är ofritt ? Du kan använda https://github.com/spaam/svtplay-dl för att tanka videon och kolla på de med din mediaspelare. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140906180755.GA4013@debian
Re: lite brydd [OT?]
On Thu, Jul 10, 2014 at 05:41:09PM +0200, Sven Arvidsson wrote: On Thu, 2014-07-10 at 17:10 +0200, j...@lillahusetiskogen.se wrote: Jag har flera gånger, senast nyss, varit med om att min dator tvärdör efter att Handbrake (ghb) har drabbats av segmenteringsfel. Det går inte ens att pinga datorn, än mindre logga in via ssh. Liknar Windows beteende. Det låter definitivt som hårdvarustrul. Överhettad processor eller kanske dåligt minne? jag hade liknande problem då var det en överhettad processor. Hände alltid när jag gjorde saker som tog massa CPU tid under en längre period. Kolla hur varm cpu:n blir med sensors ? mvh. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140710170707.GB7512@debian
Re: nu frågar jag igen...
On Sat, Jan 04, 2014 at 07:58:41PM +0100, j...@lillahusetiskogen.se wrote: Hej! Hur tankar jag ner följande sommarprogram från SR? http://sverigesradio.se/api/radio/radio.aspx?type=dbid=1668999codingformat=.m4ametafile=asx En underbar klassiker... Du öppnar den dära i en text editor. kollar i asx taggen efter entry taggen så hittar du ref taggen och i den har du ett href attribut som innehåller http://sverigesradio.se/topsy/ljudfil/1668999.m4a som du kan ta hem sedan med wget cheers -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20140104191314.GB32697@debian
[OT] Skänkes SUN E450
Hejsan, ursäkta spammande, men jag hoppas någon entusiast är intresserad av en gammal SUN-server. Det är en Sun Enterprise E450 som önskar få ett nytt hem. Servern är 10+ år och var i gång till november, men har mest blåst varmluft de senaste åren. Körde Debian så klart. Specifikation: CPU: 4x SunSPARC IIe @ 450 MHz RAM: 4GB HDD: 4 st interna. iaf två är 72GB SCSI2. Finns gott om plats för ytterligare diskar om man hittar ett bakplan. Därtill en fullbestyckad Sun D1000 extern disklåda med, vad som verkar, 36GB Ultra160-diskar (har inte varit inkopplad på länge). Medföljer en konsollkabel så man kan komma åt servern på serieporten (9600,8,N,1), men en USB-seriell behövs. Allt som allt väger detta runt 100kg och enda villkoret för att få allt detta till skänks är att du kommer och hämtar och bär ut detta från min lägenhet i Årsta, Stockholm. Jag bor på 1:a våningen så det är inte många trapport att forcera, däremot en liten bit att bära fram till lastplats. Om du fixar bärhjälpen men har problem med transport kan jag vara behjälplig att transportera det hela inom Storstockholm. Med hopp om att slippa köra denna server till skroten. Johan Björklund
Re: svtplay-dl misslyckas med en video på www.svtplay.se
On 14/11/13 22:12, Anton Eliasson wrote: anders f skrev 2013-11-14 21:26: Hej ! svtplay-dl misslyckas med en video på www.svtplay.se Jag tror jag har senaste versionen av svtplay-dl Kan någon hjälpa mig ? /Anders anders$ anders$ svtplay-dl --version 0.9.2013.10.28 anders$ anders$ anders$ svtplay-dl http://www.svtplay.se/video/1166631/det-varas-for-trollen?tab=programsida=2 [1] 6261 anders$ Traceback (most recent call last): File /usr/local/bin/svtplay-dl, line 5, in module pkg_resources.run_script('svtplay-dl==0.9.2013.10.28', 'svtplay-dl') File /usr/lib/python2.7/dist-packages/pkg_resources.py, line 499, in run_script self.require(requires)[0].run_script(script_name, ns) File /usr/lib/python2.7/dist-packages/pkg_resources.py, line 1235, in run_script execfile(script_filename, namespace, namespace) File /usr/local/lib/python2.7/dist-packages/svtplay_dl-0.9.2013.10.28-py2.7.egg/EGG-INFO/scripts/svtplay-dl, line 7, in module svtplay_dl.main() File /usr/local/lib/python2.7/dist-packages/svtplay_dl-0.9.2013.10.28-py2.7.egg/svtplay_dl/__init__.py, line 137, in main get_media(url, options) File /usr/local/lib/python2.7/dist-packages/svtplay_dl-0.9.2013.10.28-py2.7.egg/svtplay_dl/__init__.py, line 79, in get_media stream.get(options, url) File /usr/local/lib/python2.7/dist-packages/svtplay_dl-0.9.2013.10.28-py2.7.egg/svtplay_dl/service/svtplay.py, line 36, in get swf = http://www.svtplay.se%s; % match.group(1) AttributeError: 'NoneType' object has no attribute 'group' [1]+ Exit 1 svtplay-dl http://www.svtplay.se/video/1166631/det-varas-for-trollen?tab=program anders$ anders$ anders$ svtplay-dl --version 0.9.2013.10.28 anders$ Om du tar bort ?tab=programsida=2 från adressen så fungerar det: $ svtplay-dl http://www.svtplay.se/video/1166631/det-varas-for-trollen INFO Outfile: kobra-sommar-det-varingras-foumlr-trollen-svt-play.flv [007/288][=.] ETA: 0:07:58 Tänk också på att är ett specialtecken i Bash-skalet och gör att kommandoraden bryts där och det som står före -tecknet körs i bakgrunden. Det är därför du ser utmatning som [1] 6261 och [1]+ Exit 1 svtplay-dl . För att förhindra det kan du sätta adressen inom apostrofer eller citattecken, så här: $ svtplay-dl 'http://www.svtplay.se/video/1166631/det-varas-for-trollen?tab=programsida=2' Nu var det inte det som var problemet här men det är bra att känna till. Ja, har en fix som kollar efter ? automagiskt som fixar problemet om det är med eller inte. kommer commitas lite senare idag. -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/52854044.9070...@i19.se
problem installing win 7 on debian machine
Hi im trying to install windows 7 from my usb drive on a mchine that already has debian only installed on it and I keep getting invalid partition table so is there something that I have to do in debian to fix this?(I love it when copy-paste also copies thte dont styles, so stupid) see my question here: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/installing-win-7-invalid-partition-table/f55a3ef7-2db4-42cf-aa32-bd2ca316037c?tm=1379103513024 thanks for reading!
Re: How to install Debian 7 to external hard disk
On 26/08/2013 13:46, Bonno Bloksma wrote: Hi, Is there a preferred way to install Debian 7 from DVD to an external (USB) hard disk ? Euh... just install it on that disk? ;-) The whole external hard disk is to be used instead of the internal hard disk. Ok, no problem. This is to experiment with the new release (and discover fish hooks like graphics that don't work) while leaving the internal hard disk with the production Debian 6 on it completely alone. Sensible. One then boots from either the external hard disk or the internal hard disk. Yes and no, but read on. To set this up, at what stage in the install process does one actually put the new release on to the external disk ? When it asks which disk to set it up to and whether you want to do the partitioning yourself (manual) or guided. Does one need to also tell the install program where to put grub ? or does it do that automatically ? You just stated above you have a production version of Debian on the internal disk, so it has Grub already. The new installation on the external disk just needs to be added to the existing Grub config. The installer should do that for you. Is there any other special configuration one needs to do to properly put the new release on to the external hard disk ? Not that I know of. It is vastly preferable not to unplug the internal hard disk or otherwise disrupt the functioning system. No, the installer needs to access the Grub config on that disk. Unplugging it would also change the name of the disks (sda, sdb, etc) and might interfere with the installation or later on with running it, although it should not when using the default disk labels. Of course the internal hard disk will be backed up before the attempted install ... Yes, please do so. ;-) Bonno Bloksma Good day, I have been doing this for years. Run 5 different linux flavours on different usb drives. It works fine. My windows drive is in the laptop. IMPORTEND.. Pick the correct drive and partition to install. Pick the correct drive and mbr to install boot loader. Otherwise it will mes-up your windows mbr. Unless this is where you want to install the boot loader. Enjoy JohanS -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/521b48c1@telkomsa.net
Re: svtplay-dl
On Sat, Apr 13, 2013 at 05:35:28PM +0200, j...@lillahusetiskogen.se wrote: Hej! Jag vet inte om det är fel i mitt huvud eller i instruktionerna men jag lyckas inte installera. HJÄLP!!! Hej Jan. Om du bara vill använda scriptet. så kan du ta hem https://github.com/spaam/svtplay-dl/blob/master/svtplay-dl?raw=true och lägga det i någon lämplig bin katalog. cheers -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130413153841.gd18...@i19.se
Re: Migrate from Icedove to Thunderbird.
On 09/04/2013 06:43, Ethan Rosenberg, PhD wrote: Dear list - How do I migrate my 1] email 2] filters 3] mailboxes 4] address book from Icedove to Thunderbird? Thanks Ethan Good day, Here is a script that I use to migrate from debian to any other OS. But modify it to suit your circumstances. Been doing it for years. By just changing you can do the reverse. From thunderbird to thunderbird is the same just change the hidden file names for the systems. After the transfer when you first time start thunderbird it will check your additions etc. rsync -av /media/johan/trans-3/sam-all/home-all/.icedove/ /home/johan/.thunderbird/ I play around with about five different OS'ses and do this from my master OS. Like firefox, gnucash, all other files I would like to transfer. Do this with scripts. Enjoy Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/5163a9d9.5050...@telkomsa.net
Re: Inability to launch Cinnamon
2013-03-23 09:39, Sharon Kimble skrev: I've just installed cinnamon to try it out again on a new monitor. but when i try to access it i don't get any desktop just the gdm3 greeter background. i've just thought, this is a new computer, new this year and its not got a 'open-gl' capable graphics card, I have a cinnamon 2D option in my gdm session selection menu, which I assume is intended to work in cases where gl drivers are insufficient. Do you have that option? Does it behave differently from what you saw before? / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kijvqb$m61$1...@ger.gmane.org
Re: newer kernels from experimental?
2013-03-14 02:00, Brad Alexander skrev: [...] sid is still sporting the 3.2.x kernel. [...] I would like to play with some of the newer features from the later 3.x kernels from experimental, [...] I was wondering if anyone is running any of them, and if they are stable enough for day-to-day use. I use 3.7, installed from experimental, and it works well for me. I am not using any fancy filesystems or other fancy features, though. I considered installing 3.8 from experimental, but that one seems to move from the old initramfs tools to something called dracut, so I decided to stay with 3.7, as it works for me. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/khrqef$dvq$1...@ger.gmane.org
Re: Debian 6.0.6
2013-03-13 01:59, Guru Prasad skrev: Can you please send me the link to download debian 6.0.6. I checked in the http://www.debian.org but couldn't find the link for 6.0.6 version. http://cdimage.debian.org/cdimage/archive/6.0.6/, perhaps? / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/khp4im$cnq$1...@ger.gmane.org
Re: Converting a running system to a VirtualBox VM
2013-03-03 08:56, Marc Shapiro skrev: So, does anyone know of a way to convert my current system to a Virtualbox VM? Or would it be better to just create a new machine and install from scratch? Getting Citrix Receiver running properly always seems to be a hassle, so I thought that converting my current system might be easier. Any suggestions? http://www.virtualbox.org/manual/ch08.html#idp0176 I _think_ you _might_ want to try booting to a live-cd, and run something like VBoxManage convertfromraw /dev/sda/ vboximage.vdi Then try to boot the vboximage.vdi disk in vbox. When I used it, I did roughly: dd if=/dev/sda of=diskimage.dd VBoxManage convertfromraw diskimage.dd vboximage.vdi I have only tried it once, but it worked much better than I had expected (yes, I was more pessimistic than I should have been). Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kgvll2$h0p$1...@ger.gmane.org
Re: Windows XP option not showing up after fresh install.
2013-03-04 03:08, Michael skrev: I installed and during installation it found both the Win XP and the Linux Mint installations. After booting, the Mint shows up but not the XP. How do get the XP option do show up upon boot? As root, run update-grub, then reboot and see if XP is there. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kh1053$mjb$1...@ger.gmane.org
Re: Wake on lan with RTL8111/8168B
Did you ever get this to work? I have the same problem. It seems like every second time I start my computer with WOL it reboots when a issue a poweroff. -- View this message in context: http://debian.2.n7.nabble.com/Wake-on-lan-with-RTL8111-8168B-tp2867498p2878147.html Sent from the Debian User mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1361884883737-2878147.p...@n7.nabble.com
Re: How can I know which deb-multimedia packages I have installed?
2013-02-25 21:03, Slavko skrev: Dňa 25.02.2013 20:33:04 Tixyt...@yxit.co.uk napísal(a): On Sun, 2013-02-24 at 21:51 +0100, Slavko wrote: Dňa 24.02.2013 21:20:35 Csanyi Palcsanyi...@gmail.com napísal(a): So how can I know now which debian packages are installed from these deb-multimedia repositories abowe? aptitude search '~i ~OUnofficial Multimedia Packages' So I guess the search term finds installed packages that are available from the specified origin, You are right. aptitude search '~S ~i ~OUnofficial Multimedia Packages' / Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kghk0m$8d7$1...@ger.gmane.org
Re: [1/2OT] skype
2013-02-09 05:52, lina skrev: Is skype stable under the Debian? Works well enough and is stable enough for me. You can always uninstall it if you find problems. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kf4t9p$c03$1...@ger.gmane.org
Re: Debian Wheezy (v7)
2013-02-03 09:27, Tobias Eliasson skrev: Titta på gnome paket i popcon och jämför det med xfce så ser du även vad andra tycker. Att du inte påtalar nya problem med gnome tolkar Jag som att du inte längre har några faktiska problem med gnome i debian, vilket låter bra. Att du däremot personligen ogillar gnome-shell och föredrar xfce har jag förstått, och det har jag inga invändningar emot. En fördel med debian är att du kan byta skrivbordsmiljö som du vill. Jag är mycket väl medveten om att du inte är ensam med dina åsikter. Hälsningar Johan -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/keleef$g3b$1...@ger.gmane.org
Re: Debian Wheezy (v7)
2013-02-03 19:00, mattias skrev: varför är själva listan inte inställd på att svar ska gå till listan? Se FAQ: https://wiki.debian.org/FAQsFromDebianUser#Why_doesn.27t_this_list_facilitate_easy_replies_to_the_list_.28a.k.a._reply-to-munging.29.3F / johan -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kemdgs$hem$1...@ger.gmane.org
Re: Questions about multi-arch and 3rd party packages in Wheezy
2013-02-04 01:10, Marc Shapiro skrev: Unfortunately, dpkg does not automatically handle dependancies, like agt-get and aptitude do, so I get a list of dependencies, all i386 libraries. Is there any way to install such a package and get the dependant libraries installed other than manually installing each one? The information about skype on the debian wiki seems to indicate that apt-get -f install is the solution. It worked for me for skype. From https://wiki.debian.org/skype: - First, you will have to enable Multi-Arch: # dpkg --add-architecture i386 # apt-get update Then, download the i386 package as above and install: # wget -O skype-install.deb http://www.skype.com/go/getskype-linux-deb # dpkg -i skype-install.deb If you then proceed with # apt-get -f install quite a few i386 packages will be installed. -- Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kenjjk$kop$1...@ger.gmane.org
Re: possible bug for powertop 2.0-0.2
2013-01-17 16:32, Laurent Debian skrev: On battery if I launch powertop I get a crash with terminate called after throwing an instance of 'std::ios_base::failure' what(): basic_filebuf::underflow error reading the file Abandon And everything works well on AC. I see the same problem on my machine. I am also using the 3.2 kernel from testing and powertop from testing. I definitely think you should report the problem as a bug. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kdc22f$i9m$1...@ger.gmane.org
Re: when new versions will be available at wheezy ?
2013-01-12 11:26, maderios skrev: On 01/11/2013 09:18 PM, Andrei POPESCU wrote: On Vi, 11 ian 13, 10:56:22, maderios wrote: Package: * Pin: release a=experimental Pin-Priority: 600 ^ I don't think this is a good idea. Maybe 100, but definitely nothing bigger. Why ? With priority up to 100, the packages from experimental will not be upgraded with a normal upgrade command, but the packages will need explicit upgrade requests. As packages from experimental are experimental and may break your system without warning, requiring you to explicitly request upgrades of such packages seems like a good idea to me. look at man apt_preferences or search for docs on apt pinning for information about what the number means. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kcrg4m$621$1...@ger.gmane.org
Re: What happens when you upgrade a package with modified config files?
2013-01-08 16:42, David Guntner skrev: Regardless of an etc-update like tool, is that how it works in Debian? Does it avoid overwriting config files which have been changed by you since they were installed, and if so, does it put the new content with an easy-to-search-for .something at the end? The screenshot looks like: Configuration file `/etc/bash.bashrc' == Modified (by you or by a script) since installation. == Package distributor has shipped an updated version. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** bash.bashrc (Y/I/N/O/D/Z) [default=N] ? That was copied from http://raphaelhertzog.com/2010/09/21/debian-conffile-configuration-file-managed-by-dpkg/ which provides some more information. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kchpo5$98s$1...@ger.gmane.org
Re: No suitable module for running kernel found : virtualbox-ose
2013-01-01 08:39, Contact. Vardhan skrev: i am using debian 6.0.6. please look into the data provide me a possible solution : [1] installation of virtualbox-ose : # aptitude install virtualbox-ose [...] Setting up virtualbox-ose (3.2.10-dfsg-1) ... Stopping VirtualBox kernel modules. Starting VirtualBox kernel modulesNo suitable module for running kernel found ... failed! failed! invoke-rc.d: initscript virtualbox-ose, action restart failed. [...] Building initial module for 2.6.32-5-amd64 [...] DKMS: install Completed. Stopping VirtualBox kernel modules. Starting VirtualBox kernel modules. [3] boot log: http://pastebin.com/LS3ipPFc Dec 30 07:28:07 kernel: [ 157.143740] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001). I do not see a problem. What are the symptoms that make you believe that there is a problem? You seem to quote the error message from the installation process, but later in the same installation process it automatically rebuilds the kernel module without problems, and the boot-log seems to say that the module was loaded without error. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/50e2b447.8080...@gmail.com
Re: google-earth + multiarch
2012-12-18 04:49, Hugo Vanwoerkom skrev: As an exercise in multiarch I tried installing google-earth-stable_current_i386.deb in according to http://wiki.debian.org/FAQsFromDebianUser#Multiarch. Has anybody actually accomplished that? What I ended up with is: dpkg: dependency problems prevent configuration of google-earth-stable: google-earth-stable depends on lsb-core (= 3.2). But that is the i386 version of course and I never managed to get out of that hole trying to install it. I also tried and failed installing lsb-core:i386. lsb-core depends on a bunch of packages providing binaries, like python and make, and, as far as I know, multiarch does not allow co-installation of binaries, but only libraries. My conclusion would be that you would need python and python:i386 at the same time, which multiarch does not support. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kap2mo$usf$1...@ger.gmane.org
Re: Debian 7 wheezy should be released by now, don't u think?
2012-12-16 08:14, Suttiwit Sukpinit skrev: Hi, This is my first post on the mailing list. The question is: Debian 7 wheezy should be released by now because i've tried for several months since it released. it all seems stable. You can have a look at http://richardhartmann.de/blog/posts/2012/12/14-Debian_Release_Critical_Bug_report_for_Week_50/ to see the number of release critical bugs. The release should wait until that number is zero. There has been some hope for a release in February, but the number of release critical bugs is decreasing a bit slowly at the moment, it seems to me. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kak97j$8sc$1...@ger.gmane.org
Re: acroread episode
2012-12-13 05:25, lina skrev: Hi, 1. I kept the acroread related from updating for half a year, I guess. 2. Today, I tried full-upgrade, [...] 3. From http://www.deb-multimedia.org/ I try: To install new acroread packages : dpkg --add-architecture i386 apt-get update apt-get install acroread Now: apt-get install acroread Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: [long list of i386 packages] Suggested packages: [list of i386 packages] Recommended packages: cups-bsd:i386 mime-support:i386 hicolor-icon-theme:i386 xml-core:i386 The following packages will be REMOVED: lpr The following NEW packages will be installed: [long list of i386 packages] 0 upgraded, 76 newly installed, 1 to remove and 0 not upgraded. 4. $ uname -a Linux debian 3.3.5 #1 SMP Thu May 10 16:24:07 SGT 2012 x86_64 GNU/Linux I am confused about how to install the acroread, without installing other i386 packages. Short answer: You cant. You had the same things installed before, and they were just hidden inside of ia32-libs. Acroread is now a multiarch-package, as it says on the deb-multimedia website, and the amd64 package for acroread is gone. The point of multiarch is to allow installation of the 32-bit package belonging to the i386 arch and using that acroread on your amd64 system. The i386 package of acroread has dependencies on lots of other i386 libraries. Previously the 32-bit acroread was packaged in an amd64 package with dependency on ia32-libs. ia32-libs was a very large package containing all of the 32-bit libraries that acroread depended on. In the new world you can remove the large and unmaintanable ia32-libs and instead install well-maintained packages from i386. Hope that is clear enough. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kabsah$ush$1...@ger.gmane.org
Re: acroread episode
2012-12-13 07:30, lina skrev: On Thursday 13,December,2012 02:24 PM, Johan Grönqvist wrote: 2012-12-13 05:25, lina skrev: Acroread is now a multiarch-package, as it says on the deb-multimedia website, and the amd64 package for acroread is gone. The point of multiarch is to allow installation of the 32-bit package belonging to the i386 arch and using that acroread on your amd64 system. The i386 package of acroread has dependencies on lots of other i386 libraries. Previously the 32-bit acroread was packaged in an amd64 package with dependency on ia32-libs. ia32-libs was a very large package containing all of the 32-bit libraries that acroread depended on. I have purged all ia32-libs related package. Shall I install the 76 packages? (a little worry may mess up the system) Yes. I did the same thing with skype recently. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/kabu6a$cn2$1...@ger.gmane.org
debian wheezy Beta4
Good day, Two Samsung printers SCX-4623F and ML-1510. Debian wheezy Beta4 does see them but unable to install. I installed splix - no difference. Kindly what else is missing please. Now a days most linux flavours - switch on printer and it install automatically. Thanks JohanS -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/50bda077.5010...@telkomsa.net
Re: gnome3 broken on wheezy
2012-11-27 17:20, ChadDavis skrev: After recent upgrades, my gnome3 no longer works. The system boots and I can log in to an X system, but it looks more like gnome2, than gnome3; the whole activities thing and the favorites menu is gone. Instead, I have the mutliple window changer thing in the bottom right corner. So, how do I start troubleshooting this? I looked in /var/log/gdm3 logs, but couldn't see anything that lept out. There were some errors from the nvidia driver levels, but those were in older logs and, as I say, the UI works, it's just not gnome3. As you do not seem to know what has happened: You are logged into the fallback mode, also known as gnome classic. I only know of two reasons, you either (by mistake) chose this as the session in gdm when you logged in, or gnome thinks your 3D graphics support is insufficient. I would look at the list of recently upgraded packages, anything relating to gnome or graphics drivers. Unfortunately, I do not know how to troubleshoot it. I assume it would be in some logfile, but as you did not see anything in gdm3, I do not know where you should look. / Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k92qei$9r8$1...@ger.gmane.org
Debian wheezy testing - auto printer install
Good day, Installed latest wheezy weekly. I understand it is testing. The printer auto install / manual install does not work. Installed splix - no change. Anything else that should be done? Would like to test OS if printer does work. Thanks JohanS -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/50a9e309.2050...@telkomsa.net
Re: https://github.com/spaam/svtplay-dl
On Sat, Oct 27, 2012 at 07:36:56PM +0200, j...@lillahusetiskogen.se wrote: Hej! Tolka absolut inte det här som gnäll eller klagomål. Jag är väldigt tacksam att det finns människor som gör ett fantastiskt jobb med att förse oss med FRIA program för olika ändamål. Och underhåller dem. Mitt blygsamma bidrag till fri programvara är att berätta för kreti och pleti om hur bra vi har det, vi som använder fri programvara. Problemet jag har nu är att jag inte har något bra program att ladda ner dokumentärer från svt med. svtplay-dl har varit fantastiskt bra men det verkar som om inblandade har fått annat att göra. Kan någon rekommendera ett bra alternativ? Än en gång, svtplay-dl har skänkt mig mycket glädje. Jag uppdaterade svtplay-dl igår så funkar med HDS. Dock så funkar bara VOD och vissa icke krypterade strömmar har en patch patch för live på g som ska commitas imorgon. fick en patch för HLS tidigare idag men måste modifieras lite innan det kommer in. gällade krypterade sakerna så får ja skicka på det. testar på ett antal strömmar igår och det funkade. fick in en rapport om en ström med krypterat saker. men det var en utav många.. HLS har problem med krypterade strömmar också tyvärr. men men. kul att svtplay-dl funkade så länge det varade. cheers -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20121027174738.ga17...@i19.se
Resolution problem with AMD HD 3450 and Dell U3011
Hi I am trying to use a a Dell U3011 (30 inches IPS screen). The HD3450 is able to display the screen`s native resolution (2560x1600) according to http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-3000/hd-3400/Pages/ati-radeon-hd-3400-specifications.aspx provided that a dual-link DVI cable is used, which is the case. Unfortunately, the biggest available resolution is 1600x1200. The contents of /var/log/Xorg.0.log seems to show that the screen`s announced resolutions are correctly detected through EDID (included 2560x1600): [47.768] (II) RADEON(0): EDID vendor DEL, prod id 16483 [47.768] (II) RADEON(0): Using hsync ranges from config file [47.768] (II) RADEON(0): Using vrefresh ranges from config file [47.768] (II) RADEON(0): Printing DDC gathered Modelines: [47.768] (II) RADEON(0): Modeline 2560x1600x0.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP) [47.768] (II) RADEON(0): Modeline 800x600x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [47.768] (II) RADEON(0): Modeline 640x480x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [47.768] (II) RADEON(0): Modeline 640x480x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [47.768] (II) RADEON(0): Modeline 720x400x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [47.768] (II) RADEON(0): Modeline 1280x1024x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [47.768] (II) RADEON(0): Modeline 1024x768x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [47.768] (II) RADEON(0): Modeline 1024x768x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [47.768] (II) RADEON(0): Modeline 800x600x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [47.768] (II) RADEON(0): Modeline 1152x864x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [47.768] (II) RADEON(0): Modeline 1280x800x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [47.768] (II) RADEON(0): Modeline 1280x1024x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [47.768] (II) RADEON(0): Modeline 1600x1200x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [47.768] (II) RADEON(0): Modeline 1920x1200x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e) [47.768] (II) RADEON(0): Modeline 1920x1440x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) I am using the open source drivers. I also tried to manually add a 2560x1600 60Hz and 101dpi display mode through xrandr but the displayed image is not good at all. Thanks for your time. Regards. Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAKS5mhRFR6EgPsuRm_jPEopBU2jfKi1VbmCa==pmxxps-6r...@mail.gmail.com
Re: Error after booting default kernel version
2012-10-21 18:34, Gábor Hársfalvi skrev: 2012/10/20 Johan Grönqvistjohan.gronqv...@gmail.com: 2012-10-20 10:44, Gábor Hársfalvi skrev: Good! Now you know exactly what edits to what config files that you need to undo. Now you know exactly what edits to what config files that you need to undo. - Yes, I tried that but nothing helped yet. the boot config for the 686 kernel. - Where and how could I repair this? Did you ensure that the line starting with GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub reads GRUB_CMDLINE_LINUX_DEFAULT=quiet and put a # at the beginning of the GRUB_GFXMODE line then run update-grub2 again (as root or using sudo)? Did you remove the line uvesafb mode_option=1400x1050-24 mtrr=3 scroll=ywrap (or similar) from /etc/initramfs-tool/modules then run update-initramfs -u (as root or using sudo) again? (I had a typo in the first mail, and I may have one again, but the above should describe undoing the edits from the guide.) I would have expected that your installation would boot normally again after that. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k61lue$cba$1...@ger.gmane.org
Re: Error after booting default kernel version
2012-10-20 10:44, Gábor Hársfalvi skrev: I've used this tutorial - http://forums.debian.net/viewtopic.php?f=16t=60019 - yesterday, and after reboot the playmouth animation worked but before it arrived login screen it showed me a black blank screen with a flashing cursor - not mouse - and after more waiting it stayed there too. Good! Now you know exactly what edits to what config files that you need to undo. I reboot after it and start with a previous kernel version number - the number ends with 486, not 686 - with Rescue Mode. It started and after Ctrl+D - when it needs - it booted the gui succesfully and everything worked well. So it sounds to me like there is no problem with your system as a whole, just the boot config for the 686 kernel. I would like to start the computer with the newest available kernel version number, what ends with 686, and what were the default when I started the system before, but it doesn't work and give me the error screen what I mentioned before. Please give me help to repair this to boot the computer normally as before it was happenned. I would: Start the system the way you can, via rescue mode. Undo the edits you made before. It might be enough to replace GRUB_CMDLINE_LINUX_DEFAULT=quiet splash nomodeset video=uvesafb:mode_option=1400x1050-24,mtrr=3,scroll=ywrap by CMDLINE_LINUX_DEFAULT=quiet Run the same update-initramfs and update-grub commands as you did when following the guide. Hope it helps Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k5tshj$s28$1...@ger.gmane.org
Re: Debian Wheezy Hangs
2012-10-13 05:55, Tim D skrev: I just installed Debian Wheezy on my ThinkPad T430s (SSD, encrypted LVM). The problem is that the system freezes randomly, so much so that I cannot use it for more than twenty minutes without it freezing. If you have a recent CPU/GPU from intel, you might want to search for ivy bridge linux random freeze and see if that can describe your problem. Then you might try to install linux 3.5 from experimental. The 3.5 kernel works much better for me. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k5auo7$qst$1...@ger.gmane.org
Re: Hash for netinst.iso file
2012-10-05 21:58, Wally Lepore skrev: I've downloaded debian-6.0.6-i386-netinst.iso and would like to verify the download. Can anyone please point the way to the hash code to verify? I do not find them there either, so I can not help you with that CD. When I looked at the links for the standard install CDs, though, I see listings of the hash sums in the same directory as the iso files. I am referring to any of the download links on: http://www.debian.org/CD/http-ftp/index.en.html#stable / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/k4ngmk$3e7$1...@ger.gmane.org
broken pacakages in Synaptic
Hi, How can I select in Synaptic only the broken pacakages or is there another way to do it ? -- Met Vriendelijke Groet, Bien à vous, Best Regards, Mit freundlichen Grüßen Johan Vermeire Software engineer -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAH+qr0VJAL_UPVBTX=lw2_ecxzlcpxb2hvr1zsxes2g80tm...@mail.gmail.com
Re: nertankning av program från Sveriges Radio
On Wed, Aug 29, 2012 at 10:16:27PM +0200, anders f wrote: Hej ! svtplay-dl tycks inte fungera med urplay.se längre. svtplay-dl http://urplay.se/167545 RTMPDump v2.3 (c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPLnågon Failed to open file! ur-play-nr-lraren-blev-fhrer.se/ Kan någon uppdatera svtplay-dl ? Snälla. Tack för buggrapporten. Jag har fixat problemet och pushat. version 0.7.2012.08.29 har fixen. cheers -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120829211759.ga12...@i19.se
Re: [1/2 OT] How to find the desktop near me?
2012-06-30 18:16, lina skrev: Hi, The desktop installed the Sid (seems not so relevant here.) Now the monitor/screen not work; other things are totally fine. I used to login desktop first and then ssh from laptop, Now since not be able to log in, how can I find its ip ? so I can connect from laptop. or shall I just find other monitor and connect? That seems to be the simplest solution, if you have a working monitor. So you have a working computer, but without monitor, and you want to know its IP-address? I assume your laptop is connected to the same router as the monitorless computer. I would have two suggestions. 1) Log into the router, and see what IP-addresses have been given out recently, and try connecting to them. 2) Install zenmap on the laptop, find the IP-address range the router uses (mine uses 10.0.1.*, most I have used use 192.168.0.* or 192.168.1.*). Run a quick scan with zenmap on that range of IP-addresses, and see which ones have an ssh-port open. Then try to connect to those. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jsn9e7$cr0$1...@dough.gmane.org
Re: nertankning av program från Sveriges Radio
On Thu, Jun 07, 2012 at 07:43:08PM +0200, j...@lillahusetiskogen.se wrote: Hej! Säg den lycka som varar för evigt, jo det var väldigt kul så länge det fungerade, men nu har svt ställt till det: jan@nikolai ~/data $ svtplay-dl http://svt.se/2.179646/1.2811360/fargstarka_personligheter_i_oknen?page179646=1 Err: cant find stream jan@nikolai ~/data $ svtplay-dl http://www.svtplay.se/video/109244/glodlampskonspirationen Err: cant find stream Svtplay har gjort om deras sida så den blivit lite bättre för ett par dagar sedan. och så har jag lagt till så att skriptet ska funka med svt.se också :) så pulla så får du en ny version :) mvh -- Johan Andersson -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120607181625.ga27...@i19.se
Re: printer driver Samsung SCX4623f(SOLVED)
On 18/05/2012 16:50, Camaleón wrote: On Wed, 16 May 2012 07:50:29 +0200, Johan Scheepers wrote: On 15/05/2012 18:47, Brian wrote: On Tue 15 May 2012 at 17:36:36 +0100, Lisi wrote: Lenny doesn't have any scx. Squeeze, however, has scx 4200 and scx 4400. I have in the past successfully used the ppd for an earlier model in a series when the later model is not yet available, so it might be worth a try. The snapshot archive has a splix package which should install on stable. The package contains scx4623f.ppd. The OP may see some advantage in this. Thanks to all for your advice. SPLIX on the repo does not work. Then you can open a bug report for that. Googled some more and found this... http://ubuntuforums.org/showthread.php?t=341621 http://www.bchemnet.com/suldr/ Installed and then updated. Just for the record, what's what you finally installed? samsungmfp-driver-legacy samsungmfp-data Used synaptic package manager to choose the available drivers now on repo.. Installed and printer is working. And what was needed to be updated? :-? apt-get update Greetings, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb671cf.9030...@telkomsa.net
printer driver Samsung SCX4623f
Good day, Got a Samsung SCX 4623f printer. It seems that Debian 6.05 does not have a driver for it. Debian 7 testing, ubuntu 12.04, linux mint 2012.04, installs it automatically. What would be the way to install it. 1) Samsung unified driver ?. 2) Something from the repo' s? Thanks Johan S -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb22b7d.6000...@telkomsa.net
Re: printer driver Samsung SCX4623f(SOLVED)
On 15/05/2012 18:47, Brian wrote: On Tue 15 May 2012 at 17:36:36 +0100, Lisi wrote: Lenny doesn't have any scx. Squeeze, however, has scx 4200 and scx 4400. I have in the past successfully used the ppd for an earlier model in a series when the later model is not yet available, so it might be worth a try. The snapshot archive has a splix package which should install on stable. The package contains scx4623f.ppd. The OP may see some advantage in this. Thanks to all for your advice. SPLIX on the repo does not work. Googled some more and found this... http://ubuntuforums.org/showthread.php?t=341621 http://www.bchemnet.com/suldr/ Installed and then updated. Used synaptic package manager to choose the available drivers now on repo.. Installed and printer is working. Cheers, Johan S -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fb34025.8000...@telkomsa.net
Re: Graphic problem on Debian testing installed on Dell Optiplex 960
Here are the results of the 2 commands for kernel 2.6.32-5: *dmesg | grep modeset [7.265735] [drm] radeon kernel modesetting enabled. [7.267335] [drm] radeon: Initializing kernel modesetting. *dmesg | grep radeon [7.265735] [drm] radeon kernel modesetting enabled. [7.265834] radeon :01:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 [7.265881] radeon :01:00.0: setting latency timer to 64 [7.267335] [drm] radeon: Initializing kernel modesetting. [7.269719] [drm] radeon: 256M of VRAM memory ready [7.269760] [drm] radeon: 512M of GTT memory ready. [7.269847] radeon :01:00.0: irq 34 for MSI/MSI-X [7.269851] radeon :01:00.0: radeon: using MSI. [7.269912] [drm] radeon: irq initialized. [7.270335] platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin [7.537724] platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin [7.713378] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [7.876660] [drm] radeon: ib pool ready. [8.127092] fb0: radeondrmfb frame buffer device [8.127127] [drm] Initialized radeon 2.0.0 20080528 for :01:00.0 on minor 0 It seems fine. Regards and thanks for your time. Johan 2012/5/9 Arnt Karlsen a...@c2i.net: On Wed, 9 May 2012 14:06:30 +0900, Johan wrote in message caks5mhqkqwbcmujdneckfyeyckaj-herk+xvcoewyqohzok...@mail.gmail.com: Under kernel 3.2.0-2, I have: *dmesg |grep modeset [ 7.111909] [drm] radeon kernel modesetting enabled. [ 7.112268] [drm] initializing kernel modesetting (RV620 0x1002:0x95C5 0x1028:0x0342). *dmesg |grep radeon [ 7.111909] [drm] radeon kernel modesetting enabled. [ 7.111991] radeon :01:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 [ 7.111997] radeon :01:00.0: setting latency timer to 64 [ 7.112558] radeon :01:00.0: VRAM: 256M 0x - 0x0FFF (256M used) [ 7.112561] radeon :01:00.0: GTT: 512M 0x1000 - 0x2FFF [ 7.115303] [drm] radeon: 256M of VRAM memory ready [ 7.115304] [drm] radeon: 512M of GTT memory ready. [ 7.115368] radeon :01:00.0: irq 50 for MSI/MSI-X [ 7.115373] radeon :01:00.0: radeon: using MSI. [ 7.115404] [drm] radeon: irq initialized. [ 7.581930] radeon :01:00.0: WB enabled [ 7.613104] [drm] radeon: ib pool ready. [ 7.613633] [drm] radeon: power management initialized [ 7.752123] fbcon: radeondrmfb (fb0) is primary device [ 8.177088] fb0: radeondrmfb frame buffer device [ 8.177095] [drm] Initialized radeon 2.12.0 20080528 for :01:00.0 on minor 0 This looks fine, does it ? ..yup, you have everything working allright now? Do you want me to run the same commands on kernel 2.6.32-5 ? ..your problem, your thread, your decision. ;o) Regards Johan 2012/5/8 Arnt Karlsen a...@c2i.net: On Tue, 8 May 2012 13:23:29 +0900, Johan wrote in message caks5mhq_bp+f11zkdkehqrvdjez8joaunr51an2dybjqs8f...@mail.gmail.com: I installed firmware-linux, firmware-linus-non-free, libdrm2 and libdrm-radeon1. I think that radeon is starting with KMS because there is a file called radeon-kms.conf in /etc/modprobe.d/ that contains options radeon modeset=1. ..verify that with e.g. 'dmesg |grep modeset' or 'dmesg |grep radeon' or some such search. This fixed the problem for kernels 3.2.0-1 and 3.2.0-2. There is however still a problem with kernel 2.6.32-5 : rectangle of random black and white pixels disappeared but gnome login screen doesn't work. I don't know if Debian want to fix this or not. If yes, I would be glad to help in terms of testing. Thanks a lot for your help. Regards. Johan -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120509115240.20c2d...@celsius.lan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caks5mhts4bbxs8b3rd_pd6n3own4fwibw+59kw-wbyow0x+...@mail.gmail.com
Re: Graphic problem on Debian testing installed on Dell Optiplex 960
Under kernel 3.2.0-2, I have: *dmesg |grep modeset [7.111909] [drm] radeon kernel modesetting enabled. [7.112268] [drm] initializing kernel modesetting (RV620 0x1002:0x95C5 0x1028:0x0342). *dmesg |grep radeon [7.111909] [drm] radeon kernel modesetting enabled. [7.111991] radeon :01:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 [7.111997] radeon :01:00.0: setting latency timer to 64 [7.112558] radeon :01:00.0: VRAM: 256M 0x - 0x0FFF (256M used) [7.112561] radeon :01:00.0: GTT: 512M 0x1000 - 0x2FFF [7.115303] [drm] radeon: 256M of VRAM memory ready [7.115304] [drm] radeon: 512M of GTT memory ready. [7.115368] radeon :01:00.0: irq 50 for MSI/MSI-X [7.115373] radeon :01:00.0: radeon: using MSI. [7.115404] [drm] radeon: irq initialized. [7.581930] radeon :01:00.0: WB enabled [7.613104] [drm] radeon: ib pool ready. [7.613633] [drm] radeon: power management initialized [7.752123] fbcon: radeondrmfb (fb0) is primary device [8.177088] fb0: radeondrmfb frame buffer device [8.177095] [drm] Initialized radeon 2.12.0 20080528 for :01:00.0 on minor 0 This looks fine, does it ? Do you want me to run the same commands on kernel 2.6.32-5 ? Regards Johan 2012/5/8 Arnt Karlsen a...@c2i.net: On Tue, 8 May 2012 13:23:29 +0900, Johan wrote in message caks5mhq_bp+f11zkdkehqrvdjez8joaunr51an2dybjqs8f...@mail.gmail.com: I installed firmware-linux, firmware-linus-non-free, libdrm2 and libdrm-radeon1. I think that radeon is starting with KMS because there is a file called radeon-kms.conf in /etc/modprobe.d/ that contains options radeon modeset=1. ..verify that with e.g. 'dmesg |grep modeset' or 'dmesg |grep radeon' or some such search. This fixed the problem for kernels 3.2.0-1 and 3.2.0-2. There is however still a problem with kernel 2.6.32-5 : rectangle of random black and white pixels disappeared but gnome login screen doesn't work. I don't know if Debian want to fix this or not. If yes, I would be glad to help in terms of testing. Thanks a lot for your help. Regards. Johan -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120508163141.30f7b...@celsius.lan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caks5mhqkqwbcmujdneckfyeyckaj-herk+xvcoewyqohzok...@mail.gmail.com
Re: Graphic problem on Debian testing installed on Dell Optiplex 960
I installed firmware-linux, firmware-linus-non-free, libdrm2 and libdrm-radeon1. I think that radeon is starting with KMS because there is a file called radeon-kms.conf in /etc/modprobe.d/ that contains options radeon modeset=1. This fixed the problem for kernels 3.2.0-1 and 3.2.0-2. There is however still a problem with kernel 2.6.32-5 : rectangle of random black and white pixels disappeared but gnome login screen doesn't work. I don't know if Debian want to fix this or not. If yes, I would be glad to help in terms of testing. Thanks a lot for your help. Regards. Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caks5mhq_bp+f11zkdkehqrvdjez8joaunr51an2dybjqs8f...@mail.gmail.com
Re: netinst.iso - a learning experience- Part 1 grub
2012-05-06 14:26, Richard Owlett skrev: Version 6.0.4 Without double checking I believe that's Squeeze. That caused me to notice that there was no intuitively obvious way to determine what version is running. I had to look at the file name of the iso file. I would look at the file /etc/debian_version. In your case it probably says # cat /etc/debian_version 6.0.4 Knowing the mapping between version numbers and names is a different problem, as Camaleon wrote. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jo64r6$3ph$1...@dough.gmane.org
Re: netinst.iso - a learning experience- Part 1 grub
2012-05-06 00:10, Richard Owlett skrev: Why a learning experience? 'Cause when I've finished recovering, I'll know more ;/ NOW, when system boots I have 2 choices - Debian and Debian in recovery mode. b. Can I do anything at this point to allow choice to boot Windows? I think I have seen similar behaviour after installation, and that it was fixed by running update-grub (as root) on the command line. After an update-grub run, I again had a windows option. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jo50te$bpb$1...@dough.gmane.org
Re: Debian problem
Thanks for all your answers. I sent another mail to this mailing list to expose my problem. Regards. Johan 2012/5/3 Camaleón noela...@gmail.com: On Wed, 02 May 2012 19:08:52 +0900, Johan Mazel wrote: I have a problem with Debian Testing on an Dell Optiplex 960. Can I ask for some help on this list or should I use another way ? This list is okay but for the next time it would be better if you include a more descriptive subject for the problem ;-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jnrkp9$iv6$6...@dough.gmane.org -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAKS5mhRPUhJJn5=_pYdiDzMbGHJ=oks0bxy4i90vcdrqs1t...@mail.gmail.com
Re: Graphic problem on Debian testing installed on Dell Optiplex 960
I just installed ATI proprietary driver: fglrx. I can now access the Gnome login screen with any version of the kernel. I however have several problems with the multi-screen management through the Catalyst Control Center. I thus cannot use this solution permanently. However, I think that this prove that the non-proprietary ATI driver are here the source of my trouble. Does anyone knows how to fix this ? Regards. Johan 2012/5/3 Johan Mazel johan.ma...@gmail.com: Hi I have a Debian testing 64 bits running on a Dell Optiplex 960. I have three different kernels installed: 2.6.32-5, 3.2.0-1 and 3.2.0-2. Until a recent upgrade (through apt-get update/apt-get upgrade), I could not use the Gnome login screen with kernel versions 3.2.0-1 and 3.2.0-2: the top of the screen displayed a strange random pattern of pixels of many colors and the bottom of the screen was black. However, in this case, I was able to use GUI login, and, thus, Debian by using 2.6.32-5 kernel. After a recent upgrade, the Gnome login screen is now not even available with the 2.6.32-5 kernel. I only have a black screen with a cursor on the top-right corner and a rectangle constituted of random pixels in black and white located at the left of the screen and close to the top of the screen. I tried to remove the gdm3 package. This allow me reach the login console with the 2.6.32-5 kernel. In this case, I also have a rectangle constituted of random pixels in black and white located at the same place: left of the screen and close to the top of the screen. And, I still have the same bug as before with kernel versions 3.2.0-1 and 3.2.0-2: random pattern of pixels in many colors on top of the screen and black on the bottom of the screen. I tried to use the command startx when I am in the console but there is a problem. I do not copy here the result but I can extract. I think that this problem is causing the trouble with Gnome. Lspci finds this graphic card: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 LE [Radeon HD 3450] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0342 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d000 (64-bit, prefetchable) [size=256M] Memory at fe9f (64-bit, non-prefetchable) [size=64K] I/O ports at dc00 [size=256] Expansion ROM at fea0 [disabled] [size=128K] Capabilities: access denied Kernel driver in use: radeon I have no idea how to fix this problem. I would be grateful is somebody could help me fix it. Regards. Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAKS5mhRBvCDoarP6WfMMdtUGupntXxc6VfZ0FEitt68CL6dº@mail.gmail.com
Debian problem
Hi I have a problem with Debian Testing on an Dell Optiplex 960. Can I ask for some help on this list or should I use another way ? Regards. Johan Mazel -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/caks5mhrijtzfo762y-gz6jc4tgbjhitjdc0e25qcfuvrmfo...@mail.gmail.com
Re: Swap space not used
2012-05-02 13:12, Sian Mountbatten skrev: Your swap partition is, very likely, too large. As a rule, your swap partition should be the same size as your RAM. Do you have 40GB RAM? Linux can handle well above 40 GB of swap. I would be surprised if swap partition too large was the reason. My swap is larger than that. I am always a bot surprised by advice like the ones in this thread. I have heard and seen this many times. I am aware that for web-browsing, and other similar activities, using swap is almost always bad, as it slows the system down. I typically run programs and scripts without having a good estimate of their future memory usage, and my computer usage is frequently RAM-bound, so I try to guess how much I can do within the memory I have available. It is not uncommon for me to misjudge the need by a factor of 2 or 3, and in those cases, I have programs being killed left and right unless I have enough swap-space. I would say that being careful with swap-space is important when one has too small a hard drive, but I have plenty of drives space these days. Not having my jobs killed is more important to me than saving a few tens of GB of extra space. I have just above 40 GB on my current desktop, and when I had influence over a computer with 64GB RAM, it had quite a bit of swap space. Mem: 64558M total,24822M used,39735M free, 324M buffers Swap: 184323M total, 25M used, 184298M free,24238M cached Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jns26c$n9e$1...@dough.gmane.org
Graphic problem on Debian testing installed on Dell Optiplex 960
Hi I have a Debian testing 64 bits running on a Dell Optiplex 960. I have three different kernels installed: 2.6.32-5, 3.2.0-1 and 3.2.0-2. Until a recent upgrade (through apt-get update/apt-get upgrade), I could not use the Gnome login screen with kernel versions 3.2.0-1 and 3.2.0-2: the top of the screen displayed a strange random pattern of pixels of many colors and the bottom of the screen was black. However, in this case, I was able to use GUI login, and, thus, Debian by using 2.6.32-5 kernel. After a recent upgrade, the Gnome login screen is now not even available with the 2.6.32-5 kernel. I only have a black screen with a cursor on the top-right corner and a rectangle constituted of random pixels in black and white located at the left of the screen and close to the top of the screen. I tried to remove the gdm3 package. This allow me reach the login console with the 2.6.32-5 kernel. In this case, I also have a rectangle constituted of random pixels in black and white located at the same place: left of the screen and close to the top of the screen. And, I still have the same bug as before with kernel versions 3.2.0-1 and 3.2.0-2: random pattern of pixels in many colors on top of the screen and black on the bottom of the screen. I tried to use the command startx when I am in the console but there is a problem. I do not copy here the result but I can extract. I think that this problem is causing the trouble with Gnome. Lspci finds this graphic card: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 LE [Radeon HD 3450] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0342 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d000 (64-bit, prefetchable) [size=256M] Memory at fe9f (64-bit, non-prefetchable) [size=64K] I/O ports at dc00 [size=256] Expansion ROM at fea0 [disabled] [size=128K] Capabilities: access denied Kernel driver in use: radeon I have no idea how to fix this problem. I would be grateful is somebody could help me fix it. Regards. Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAKS5mhSAKscZ_ocZYBFifXDiRryw3jkPr=y73znt93tdagc...@mail.gmail.com
Re: Can't install flashplugin.nonfree. ERROR: wget failed to download
2012-04-30 07:46, Han Soo Chang skrev: If you try fetching it with wget: wget http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc; does it produce an error message? This is the message I get. I am inside a corporate LAN with a proxy server whose address is ns14:8080. Cannot write to `fp10.sha512.amd64.pgp.asc' (Permission denied). As Curt wrote, it seems that you can not write the output file. To verify that it is not network related: wget http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc; tries tio fetch and write to file, which does not work, as you tried before. wget http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc -O - will try to fetch the file and print it to standard output, so that you see it on screen. I expect that to work without problems. Is this a special setup with special write permissions? My interpretation is that the installation scripts fails to write a file that it wants to save to disc for later use. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jnm7ou$bmr$1...@dough.gmane.org
Re: changing window managers in debian 6.0.4
2012-04-30 05:36, Dan Hitt skrev: This is a sort of subquery to the question of how to change window managers. So the question is: supposing you compile a window manager yourself, so that it does not come from the packaging system. What is the standard best way of setting this new window manager as yours? It certainly won't exist in any of the lists on the login page, since debian could not know about it. So, i googled around, and there's this page http://www-rohan.sdsu.edu/doc/debian/ch-X.html which recommends just making an executable file /home/USER/.xsession and putting in a sequence of commands there---which could just be the path to your window manager. I tried this, and . . . . it works. But i feel a little uneasy about this, like this is not a best practice, or some newer release of debian may break it. My internet suggests to look in the /usr/share/xsessions folder, and create a new file there. The files there appear to be .desktop files, whose format should be defined be the internet somewhere (a freedesktop.org-related format, I believe). I have not tested this. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jnl75c$38a$1...@dough.gmane.org
Re: Can't install flashplugin.nonfree. ERROR: wget failed to download
2012-04-30 06:58, Han Soo Chang skrev: $ sudo apt-get install flashplugin-nonfree ERROR: wget failed to download http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc More information might be available at: http://wiki.debian.org/FlashPlayer Works for me. If you run update-flashplugin-nonfree --install again, does it work now? Otherwise: If you paste the URL: http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc into a web-browser, do you see the (rahter short) file [0] containing a hash-key? If that worked: If you try fetching it with wget: wget http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc; does it produce an error message? You can add -v to the command lines for both undate-flasplugin-nofree and wget to get verbose output that you can paste here, if you want to. Regards Johan [0] the file is a text file, some 20 lines long, starting with -BEGIN PGP SIGNED MESSAGE- and ends with -BEGIN PGP SIGNED MESSAGE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jnl801$7vh$1...@dough.gmane.org
Re: changing window managers in debian 6.0.4
2012-04-25 06:36, Dan Hitt skrev: I'm running debian 6.0.4 (squeeze). I'm attempting to change my window manager from the default metacity to wmaker (WindowMaker). I attempted the change by sudo update-alternatives --display x-window-manager and then choosing the wmaker alternative. I think gnome uses its own configuration system rather than debian's. I think it goes something like this: Open gconf-editor (install it if it is not already installed). Find the correct place to edit (I do not have a gnome2 installation here). It may be desktop/gnome/session/required_components/windowmanager, as suggested by the internet. You could search for required_components and I think you should find the right place. You should see that windowmanager is set to metacity. Change it to whatever you like (wmaker, I guess). At least that procedure worked for me when I switched form metacity to compiz. There is also the command line way. As I have never used it I will not propose it, but the internet hints at gconftool-2 -s /desktop/gnome/session/required_components/windowmanager xmonad --type string as the command line way of setting the windowmanager to xmonad. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jn82au$da4$1...@dough.gmane.org
Finding upgradable packages by priority
Hi, I run testing and after 5 days without upgrading, I have around 100 upgradable packages. Normally, I upgrade when reaching the (arbitrarily chosen) number 100, but I would like to have a better way of deciding when I want to upgrade something. What I would like to have is a way of finding upgradable packages where the upgrade has a priority that is medium or high priority. The intention is to make it easier for me to find out what important upgrades are available, and decide based on that if when I want to upgrade. I assume this kind of search would require downloading the changelog for each upgradable package, and looking at all entries that are more recent than the installed version, then returning a match to the search if any of those versions are marked priority=meduim or above. Does anyone know of a way to accomplish what I want in an automated fashion? Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jmbdsv$vmt$1...@dough.gmane.org
Re: Finding upgradable packages by priority
2012-04-14 10:52, Johan Grönqvist skrev: I assume this kind of search would require downloading the changelog for each upgradable package, and looking at all entries that are more recent than the installed version, then returning a match to the search if any of those versions are marked priority=meduim or above. I do of course mean urgency=medium or above, not priority. Sorry about the extra traffic. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jmbe0u$vmt$2...@dough.gmane.org
Re: When will Debian 7.0 with Linux Kernel 3.x be Released?
2012-03-27 07:04, Teo En Ming (Zhang Enming) skrev: I am actually looking forward to Debian 7.0 with Linux Kernel 3.x. As we all know, Debian 6.0.x is still using the old Linux Kernel 2.6. Why do I want Linux Kernel 3.x? Because I want to play around with Xen virtualization (dom0 required). Debian developers, please speed up! I would recommend debian testing, wheezy (to become debian 7), even before it is formally released. I use debian testing (currently wheezy) as my primary os, and in my experience it is more reliable than (non-LTS) releases of ubuntu. It might require more knowledge, but if your aim is defined as playing around, I do not think that should be a hindrance. Advice will vary a lot, and the above is only my personal opinion. Debian 7 is expected to be frozen this summer, and I think people expect a release sometime in late autumn or winter, perhaps early next year. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jkrna4$240$1...@dough.gmane.org
Re: Debian wheezy: unattended upgrades
2012-03-11 17:13, Aaron Marks skrev: Unfortunately new packages are not installed. That's what my unattended-upgrades.log looks like: 2012-03-11 07:03:24,239 INFO Initial blacklisted packages: 2012-03-11 07:04:15,883 INFO Starting unattended upgrades script 2012-03-11 07:04:21,575 INFO Allowed origins are: ['o=Debian,a=wheezy', 'o=Debian,a=wheezy/updates'] 2012-03-11 07:05:39,411 INFO No packages found that can be upgraded unattended What's wrong? My policy output (apt-cache policy) names an archive release o=Debian,a=testing,n=wheezy,l=Debian,c=main whereas your log says that you allow only a=wheezy. My first guess would be that it may match if you replace wheezy by testing, but I do not know where, as I do not use unattended-upgrades. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jjim6n$15h$1...@dough.gmane.org
howto log screen output while booting
Good day, On wheezy testing how can the screen output be logged. There seem to to be a bit problem with some missing modules. Too fast can not read it. The OS is running fine. I am actually impressed. My samsung scx-4624f was installed in seconds after switch on and connected to PC. On other OS,ses and even debian squeeze it took some doing. Thanks Johan S -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f5756c0.70...@telkomsa.net
Re: howto log screen output while booting
On 07/03/2012 14:51, Camaleón wrote: On Wed, 07 Mar 2012 14:38:24 +0200, Johan Scheepers wrote: On wheezy testing how can the screen output be logged. There seem to to be a bit problem with some missing modules. Too fast can not read it. (...) Boot logs go under /var/log/messages and /var/log/boot (should bootlodg has been enabled). Also, dmesg|grep module could also help. Greetings, Thanks , bootlogd enabled but not working. Debian Bug report logs - #564149 mailto:564...@bugs.debian.org on squeeze. Seem to be not working in wheezy too
Re: howto log screen output while booting
On 07/03/2012 16:34, Camaleón wrote: On Wed, 07 Mar 2012 08:13:50 -0600, hvw59601 wrote: Johan Scheepers wrote: On 07/03/2012 14:51, Camaleón wrote: On Wed, 07 Mar 2012 14:38:24 +0200, Johan Scheepers wrote: On wheezy testing how can the screen output be logged. There seem to to be a bit problem with some missing modules. Too fast can not read it. (...) Boot logs go under /var/log/messages and /var/log/boot (should bootlodg has been enabled). Also, dmesg|grep module could also help. Greetings, Thanks , bootlogd enabled but not working. Debian Bug report logs - #564149mailto:564...@bugs.debian.org on squeeze. Seem to be not working in wheezy too You can also delay the kernel boot messages by appending boot_delay=miliseconds at GRUB's kernel line. Too tecnical for me How about dmesg? Have a lot of output. Works in Wheezy. Yup, it also works here (wheezy). But IIRC, bootlogd fails at a random basis (works on some systems, it doesn't work on others). Greetings, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f57a966.2050...@telkomsa.net
Re: howto log screen output while booting
On 07/03/2012 21:52, Wayne Topa wrote: On 03/07/2012 11:34 AM, Wayne Topa wrote: On 03/07/2012 09:13 AM, hvw59601 wrote: Johan Scheepers wrote: On 07/03/2012 14:51, Camaleón wrote: On Wed, 07 Mar 2012 14:38:24 +0200, Johan Scheepers wrote: On wheezy testing how can the screen output be logged. There seem to to be a bit problem with some missing modules. Too fast can not read it. (...) Boot logs go under /var/log/messages and /var/log/boot (should bootlodg has been enabled). Also, dmesg|grep module could also help. Greetings, Thanks , bootlogd enabled but not working. Debian Bug report logs - #564149 mailto:564...@bugs.debian.org on squeeze. Seem to be not working in wheezy too Works in Wheezy. I thought it was too until I did wtopa@dj:~$ ls -l /var/log/boot* -rw-r- 1 root adm 6.9K Jan 12 13:07 /var/log/boot -rw-r- 1 root adm 6.8K Jan 12 10:50 /var/log/boot.0 -rw-r- 1 root adm 2.0K Jan 12 09:55 /var/log/boot.1.gz -rw-r- 1 root adm 2.0K Jan 11 07:57 /var/log/boot.2.gz -rw-r- 1 root adm 2.0K Jan 10 14:39 /var/log/boot.3.gz -rw-r- 1 root adm 2.0K Jan 10 13:35 /var/log/boot.4.gz wtopa@dj:~$ cat /etc/default/bootlogd # Run bootlogd at startup ? BOOTLOGD_ENABLE=Yes I am seeing the same on sid! ?? wtopa@dj:~$ cat /media/sid/etc/default/bootlogd.dpkg-old # Run bootlogd at startup ? BOOTLOGD_ENABLE=Yes UPDATE Fount the problem. Even though dpkg -l bootlogd said it was installed. some how back in January the bootlogd executable had been removed. Aptitude was able to purge/install the package and the log is now working in wheezy The Sid is somewhat different. I moved the weird bootlogd.dpkg-old to bootlogd and restarted that service and it is now working. I think(?) the problem(s) occurred during the upgrade to bootlogd version 2.88dsf-22, which broke initscripts and sysvinit-utils. Anyway a reinstall on sid fixed it. Wayne Wheezy. I installed bootlogd and now there is information in /var/log/boot. But nothing about the firmware failure/missing. Thats is the info I am looking for. More suggestions please. Thanks Johan S -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f5855b5.1010...@telkomsa.net
Re: wheezy without gui
2012-02-28 20:06, abdelkader belahcene skrev: hi, I tryed the testing cd (20 feb). The installation is done but no graphical interface no gnome, no gdm etc... When I look at http://www.debian.org/devel/debian-installer/, I see only netinstall CDs, and if you used one of those, it would not contain a GUI on the CD. When installing with a network connection, it should have installed (offered to install with default answer yes) a (gnome) desktop. I think you can get the standard gui installation by running tasksel --new-install in your installed system. It should show you a selection of categories, and you can choose which to install software for. I hope that for the final release, we get the GUI (gnome) in the first cd. I definitely expect you will. Regards Johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f4d3502.4040...@gmail.com
Re: is there no sane, minimal, graphical RSS feed reader in existance?
2012-02-27 05:56, Celejar skrev: On Sun, 26 Feb 2012 07:39:14 +0100 Johan Grönqvistjohan.gronqv...@gmail.com wrote: Have you been disappointed by the 1.8 version as well? Not sure - my current installation is Squeeze, and I have 1.6.4. My previous install was Sid, and I probably had 1.8 on it before I stopped using that machine. 1.8 is not yet in debian, sid still has 1.6.5. In any event, I'm currently pretty happy with Liferea (1.6.x), although it's kind of sluggish (perceptible lag when moving to new item / feed, very slow startup, serious application unresponsiveness while updating all feeds). My opinions exactly, but I am looking forward to 1.8, when it enters the debian archive. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jif5sb$c3t$1...@dough.gmane.org
Re: is there no sane, minimal, graphical RSS feed reader in existance?
2012-02-26 02:14, Celejar skrev: On Fri, 24 Feb 2012 13:29:48 -0500 I, too, shared the OP's frustration with the dearth of good, fast GUI RSS readers; I use liferea, but its performance is disappointing. Have you been disappointed by the 1.8 version as well? I have not tried it, but from what I understand it was written with this problem in mind. From the liferea blog: When you upgrade to 1.8 you might be searching for new features and be a bit disappointed. The thing is that we put our development focus into performance improvements and removing bottlenecks From a comment in the corresponding debian bug (#651913): After testing the new version, I can confirm it is faster and more responsive than the previous one (1.6). The upgrade also seems to go smoothly. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f49d392.1000...@gmail.com
Re: Please assist.
2012-01-29 13:29, BETA BOOKSHOP STATIONERS BETA BOOKSHOP skrev: I have a problem with my printer(Gestetner Dsm 718) installation.I have tried severally without and success.I have gone to AdministrationPrintingLocahost and tried to add a new printer from USB serial but it has refused.I have felt defeat and want you to help in retaining my hope. (I guess from the above description that you are using gnome as your user interface on debian stable (version 6.something).) I have been refused adding a printer, and the reason was that I was not a member of the lpadmin group. Apart from that I have no advice, other than that if you describe what you mean by I was refused in more detail (What was the exact eror message?, is the question), someone may recognize it and help you. Also, I have (sometimes) had more luck using the webinterface, which you should find if you point your browser to localhost:631. / johan How can I Install this.Since I have even tried it using a Software Disk but still it refuses. *Kind Regards, Kagiri Daniel.* -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jg3j7i$6gj$1...@dough.gmane.org
Re: Gnome Shell battery indicator missing
2012-01-12 09:40, Panayiotis Karabassis skrev: On 01/11/2012 10:41 PM, Johan Grönqvist wrote: 2012-01-11 20:26, Panayiotis Karabassis skrev: I am neither certain, nor do I have a solution, but if I had considered this a major problem, I would have updated gnome-shell to 3.2 from unstable (and some other gnome-related packages would also have to be upgraded). (Assuming you use linux) Linux as opposed to GNU Hurd, you mean? I mean linux as opposed to debian/kFreeBSD. It seems that freebsd is the reason it has not migrated to testing yet. See http://bugs.debian.org/652482. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jenmtt$l4$1...@dough.gmane.org