Re: aptitude purge flashplugin-nonfree hang
Andrew Sackville-West [EMAIL PROTECTED] writes: On Sun, Jun 15, 2008 at 08:47:10AM +0200, Paul Csanyi wrote: Hello! My System is Debian GNU/Linux Etch and Half. I have installed flashplugin-nonfree and it works well with iceweasel so far. ... I can't to purge nor remove flashplugin-nonfree with aptitude. Aptitude hangs at this task. What can I do to solve this problem? Any advices will be appreciated! Paul , please provide details of what happens when you attempt to remove aptitude. Preferably, copy and paste the console output including the initial command line used. $ sudo aptitude remove aptitude give to me an error message about that that tasksel is a broken package. After I remove aptitude and tasksel and install these again (with apt-get), I can to remove flashplugin-nonfree and install it again. Now iceweasel works fine. :) -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
aptitude purge flashplugin-nonfree hang
Hello! My System is Debian GNU/Linux Etch and Half. I have installed flashplugin-nonfree and it works well with iceweasel so far. Then I edit /apt/sources.list --- deb http://www.backports.org/debian etch-backports main contrib non-free --- and setup apt to can use deb packages from Debian Backports. I edit the /apt/preferences file: --- Package: * Pin: release a=etch-backports Pin-Priority: 200 -- Then I made an upgrade and I think then was upgraded flashplugin-nonfree too. Now I have flashplugin-nonfree version 1:1.4~bpo40+1. The iceweasel crash when I try to open a webpage: http://www.hobbielektronika.hu/cikkek/nullarol_a_robotokig_-_pic_mikrovezerlok_i_resz.html?pg=1Submit=%3E%3E That was yesterday. Today iceweasel can't open at all this web page. I can't to purge nor remove flashplugin-nonfree with aptitude. Aptitude hangs at this task. What can I do to solve this problem? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Lazarus Debian
Hello! My system is Debian Etch And Half. I need to install Lazarus but there is no debian package for Etch. Can I, and if can, how can I install Lazarus on Debian Etch? I have tried to search on Google but can't find any solution. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: GRUB device numbers/names, use of device.map (Re: migrating Debian GNU/Linux Etch to second SATA drive)
[EMAIL PROTECTED] writes: Am 2008-05-10 um 07:01 schrieb Paul Csanyi: [EMAIL PROTECTED] writes: By the way, if you have a floppy drive, you can install GRUB on a floppy too, then you have a GRUB emergency disk which lets you perform operation such as those you described (in the GRUB shell) (for cases of drive failure etc.). -Moritz That shall I to do, or maybe there is an alternative option, say to install GRUB on the USB stick as emergency disk? Now, when I have finally installed GRUB on the sda so I can to boot with it the Debian Etch that is on the sdb, I can use Debian Etch Netinstall CD in rescue mode. I run a shall in the rescue mode on the root partition of the Debian Etch system (on the sdb). There I chroot target/ , mount /usr/ and run grub: grub root (hd1,0) grub setup (hd0) grub quit Another tip is to type something like root ( + tab, it will give you all of possible devices, then complete the name of one device and use tab again, GRUB should then tell you which file system is on that disk which might so help you. The tip that you wrote down abowe is helpful. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OCR for page with multiple languages and hand written)
Jabka Atu [EMAIL PROTECTED] writes: Is there a way to run OCR application on hand written pages ? You can try this ocr: http://code.google.com/p/ocropus/ http://groundstate.ca/ocr Ocropus is the motherload of Free OCR. It began as a combination of a handwriting analysis engine and a layout analysis engine. for example Holocaust survivor pages : http://www.yadvashem.org/wps/portal/!ut/p/_s.7_0_A/7_0_FL/.cmd/acd/.ar/sa.portlet.VictimDetailsSubmitAction/.c/6_0_9D/.ce/7_0_V9/.p/5_0_P1/.d/0?victim_details_id=1095695victim_details_name=+Miriamq1=GwXd61Y7MtE%3Dq2=gF54%2BlRc%2B8gjY1EQ4lB%2BJtpxmSuk2VT0q3=7GjiPPUO5Xs%3Dq4=7GjiPPUO5Xs%3Dq5=05T74vXAguw%3Dq6=uTksSXvU85U%3Dq7=nbnDzZG2mKi8bfws7fo53YM0Go8emXjffrm1_npage=1#7_0_V9 in the right side there is an image . the issue is that not only it is hand written it is also in several languages. OCRopus(tm) is a state-of-the-art document analysis and OCR system, featuring pluggable layout analysis, pluggable character recognition, statistical natural language modeling, and multi-lingual capabilities. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
Kevin Mark [EMAIL PROTECTED] writes: On Thu, May 08, 2008 at 11:12:30PM +0200, Paul Csanyi wrote: Hello! cd / mount -t ext3 /dev/discs/disc1/part1 /mnt # this is the / partition of the sdb mount -t ext3 /dev/discs/disc1/part2 /mnt/usr # this is the /usr partition of the sdb mount -t proc proc /mnt/proc mount -t sysfs sys /mnt/sys mount -o bind /dev /mnt/dev chroot /mnt /bin/bash But, I can't to install grub to boot sdb root from the sda MBR. Any advices will be appreciated! Is the partition mounted rw ? Which partition? nano /etc/mtab ... /dev/sdb1 / ext3 rw,errors=remount-ro 0 0 Did you mean this abowe? This is the: /dev/discs/disc1/part1 mounted as /mnt -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
NN_il_Confusionario [EMAIL PROTECTED] writes: On Thu, May 08, 2008 at 11:12:30PM +0200, Paul Csanyi wrote: Error: /dev/scsi/host1/bus0/target0/lun0/disc does not have any corresponding BIOS drive. is /etc/mtab correct ? is /boot/grub/device.map (which might be created by grub-install by reading /etc/mtab) correct ? Yes, it is: nano /etc/mtab ... /dev/sdb1 / ext3 rw,error=remount-ro 0 0 have you searched google Linkname: grub error does not have any corresponding BIOS drive\ - Google Search URL: http://www.google.com/search?num=100hl=enie=ISO-8859-1q=grub+error+does+not\ +have+any+corresponding+BIOS+drivebtnG=Search ? I checked /boot/grub/device.map: (hd0) /dev/sda (hd1) /dev/sdb I edited menu.lst: # kopt=root=/dev/sdb1 ro # groot=(hd1,0) I run grub-install with --recheck option. Still I have no success. I boot the Debian Etch system from the sda, and check the /boot/grub/ directory of the Debian Etch system from the sdb. There I find strange situation. The /boot/grub/ directory contain another /boot directory with grub/. I removed this second boot/grub/ directory. This must be the case because when I tried to run grub-install I tried also to reinstall grub with aptitude reinstall grub.. I shall reboot to see how it works the grub-install now. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
Paul Csanyi [EMAIL PROTECTED] writes: NN_il_Confusionario [EMAIL PROTECTED] writes: On Thu, May 08, 2008 at 11:12:30PM +0200, Paul Csanyi wrote: Error: /dev/scsi/host1/bus0/target0/lun0/disc does not have any corresponding BIOS drive. is /etc/mtab correct ? is /boot/grub/device.map (which might be created by grub-install by reading /etc/mtab) correct ? Yes, it is: nano /etc/mtab ... /dev/sdb1 / ext3 rw,error=remount-ro 0 0 have you searched google Linkname: grub error does not have any corresponding BIOS drive\ - Google Search URL: http://www.google.com/search?num=100hl=enie=ISO-8859-1q=grub+error+does+not\ +have+any+corresponding+BIOS+drivebtnG=Search ? I checked /boot/grub/device.map: (hd0) /dev/sda (hd1) /dev/sdb I edited menu.lst: # kopt=root=/dev/sdb1 ro # groot=(hd1,0) I run grub-install with --recheck option. Still I have no success. I boot the Debian Etch system from the sda, and check the /boot/grub/ directory of the Debian Etch system from the sdb. There I find strange situation. The /boot/grub/ directory contain another /boot directory with grub/. I removed this second boot/grub/ directory. This must be the case because when I tried to run grub-install I tried also to reinstall grub with aptitude reinstall grub.. I shall reboot to see how it works the grub-install now. No success. :( -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
Paul Csanyi [EMAIL PROTECTED] writes: Paul Csanyi [EMAIL PROTECTED] writes: NN_il_Confusionario [EMAIL PROTECTED] writes: On Thu, May 08, 2008 at 11:12:30PM +0200, Paul Csanyi wrote: Error: /dev/scsi/host1/bus0/target0/lun0/disc does not have any corresponding BIOS drive. is /etc/mtab correct ? is /boot/grub/device.map (which might be created by grub-install by reading /etc/mtab) correct ? Yes, it is: nano /etc/mtab ... /dev/sdb1 / ext3 rw,error=remount-ro 0 0 have you searched google Linkname: grub error does not have any corresponding BIOS drive\ - Google Search URL: http://www.google.com/search?num=100hl=enie=ISO-8859-1q=grub+error+does+not\ +have+any+corresponding+BIOS+drivebtnG=Search ? I checked /boot/grub/device.map: (hd0) /dev/sda (hd1) /dev/sdb I edited menu.lst: # kopt=root=/dev/sdb1 ro # groot=(hd1,0) I run grub-install with --recheck option. Still I have no success. I boot the Debian Etch system from the sda, and check the /boot/grub/ directory of the Debian Etch system from the sdb. There I find strange situation. The /boot/grub/ directory contain another /boot directory with grub/. I removed this second boot/grub/ directory. This must be the case because when I tried to run grub-install I tried also to reinstall grub with aptitude reinstall grub.. I shall reboot to see how it works the grub-install now. No success. :( At last I have success! :D I don't use grub-install command but run grub on the command line, and: grub root (hd1,0) grub setup (hd0) grub quit Success!! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
[EMAIL PROTECTED] writes: I am not sure if I understood you correctly, so please correct me if I am wrong, but I assume: * you have basically moved all needed partitions for a full Debian system from one disk to another, That is correct. I copied all Debian partition from sda to sdb with Gparted live CD. * and now you want to install GRUB to this second disk so that GRUB can boot from that disk (and you can eventually remove the old disk from the system). No. I want to keep sda for the Windows XP. I want to install Grub on this sda so I can to boot with it the Debian on the sdb. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: migrating Debian GNU/Linux Etch to second SATA drive
[EMAIL PROTECTED] writes: By the way, if you have a floppy drive, you can install GRUB on a floppy too, then you have a GRUB emergency disk which lets you perform operation such as those you described (in the GRUB shell) (for cases of drive failure etc.). -Moritz That shall I to do, or maybe there is an alternative option, say to install GRUB on the USB stick as emergency disk? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
migrating Debian GNU/Linux Etch to second SATA drive
Hello! I tried to migrating from the first to second SATA drive My Debian Etch OS with Gparted. I copied the /, /usr, /var, swap, /tmp, /home partitions of the system to the second SATA: sdb with Gparted. Then I tried to set up grub to boot this Debian system from the first SATA drive sda, and did the following: - boot the install CD of the Etch Netinstall - at prompt use expert - ... - detecting disks - did not disk partition - run a shell Here I follow the mini howto: http://wiki.archlinux.org/index.php/Reinstalling_GRUB cd / mount -t ext3 /dev/discs/disc1/part1 /mnt # this is the / partition of the sdb mount -t ext3 /dev/discs/disc1/part2 /mnt/usr # this is the /usr partition of the sdb mount -t proc proc /mnt/proc mount -t sysfs sys /mnt/sys mount -o bind /dev /mnt/dev chroot /mnt /bin/bash grub-install /dev/sda Error: /dev/scsi/host1/bus0/target0/lun0/disc does not have any corresponding BIOS drive. I can't here as root to use nano because of the bterm error. I did the following to get some editor, namely mcedit: TERM=xterm export TERM mcedit /etc/fstab I can to use here mcedit, but with difficulties. Still can to edit fstab, however. But, I can't to install grub to boot sdb root from the sda MBR. Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
the file /boot/grub/stage1 not read correctly.
Hello! On my PC box I have two WD 320 GB Sata drive, sda is for the Win XP, sdb is for the Debian GNU/Linux Etch system. First sdb drive was the sda drive and vica versa, but I swapped them, because I must to format sata properly for the Win XP. So now became the Debian system on to the sdb. I must to set up Grub to can to boot Debian, but I can't to do this. I boot with the Debian Etch netinstall CD in rescue mode. I chroot to the target and mount there /usr to can run: grub-install /dev/sda but get an error message: Searching for GRUB installation directory ... found: /boot/grub The file /boot/grub/stage1 not read correctly. What can I do to solve this problem? Any advices will be appreciated! -- Regards, Paul -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Grub question..
ISHWAR RATTAN [EMAIL PROTECTED] writes: I did Linux install on a Vista machine but wrote the grub info to partition (and not MBR) - I want to dual boot using grub on bootable CD. /dev/sda1, /dev/sda2 are NTFS partitions /dev/sd3 (Linux swap), /dev/sda4 (Linux /, all there) I copied the grub menu.lst entry from /boot/grub/menu.lst (on /dev/sda4) as: title Debian GNU/Linux, kernel 2.6.24-2.6.24.4.slh.5-sidux-686 root(hd0,3) kernel /boot/vmlinuz-2.6.24-2.6.24.4.slh.5-sidux-686 \ root=/dev/sda4 ro quiet vga=791 initrd /boot/initrd.img-2.6.24-2.6.24.4.slh.5-sidux-686 but grub fails to find the /boot/vmlinuz-2.6.24-2.6.24.4.slh.5-sidux-686 file. Also tried prepending (hd0,3) to file name but did not work. Any pointers? Use installation CD of the Debian. Boot with it typing at boot prompt: rescue. Choose the .../part4 where is your / directory. When came to the Rescue operations, choose to run a shell on this partition. Here you mount if you have to your /usr partition with: 'mount /usr' command. Run the command: 'grub-install /dev/sda' and 'update-grub'. Then Ctrl + Alt + Del and remove your installation CD and reboot. You should now to get the Grub menu. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Changing in the BIOS HDD settings when Debian have installed
Hello! I have installed on HDD: SATA WDC WD3200YS-01P Debian GNU/Linux Etch on the second partition. I must to install on this PC box M$ Win too, on the first partition. Running fdisk -l I get informations of the cylinders: Disk /dev/sda: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders I think that that this geometry isn't compliant with the other OS (Win) so I must to change this settings in the BIOS. But then I don't know whether can I boot again my Debian Etch? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
when Debian SID have installed, never could to go to testing?
Hello! I have installed Debian SID on my old laptop. I am asking a self whether I can to go from this system to the testing? -- Regards, Paul -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wakeonlan
Paul Csanyi [EMAIL PROTECTED] writes: Paul Csanyi [EMAIL PROTECTED] writes: Carl Fink [EMAIL PROTECTED] writes: On Sun, Apr 20, 2008 at 05:10:40AM +0200, [EMAIL PROTECTED] wrote: Wake On LAN wakes a system from poweroff. There is no need to suspend or hibernate. I red in the motherboard manual: ... It will allow the network to remotely power-on a Soft Power Off (Soft-Off) PC. However, if your system is in the Suspend mode, you can power-on the system only through an IRQ or DMA interrupt. I red here too: Important: The 5VSB power source of your power supply must support greater or equal 720 mA. I have setup 'Enabled' in BIOS 'Power Management Setup' the 'Resume on PCI Event' too, soo finally I can to wake on from gateway/router my server box with wakeonlan. I must to give too the proper Broadcast address to my LAN. However I can't wake up the PC box debian server from the debian gateway when I power off the debian server with shutdown command and after that I plug off the power cable of the PC supply. But when I power on the debian server with it's power button and right after that I power it off with power button, then I can to wake up the debian server from the debian gateway with wakeonlan command. What cause this event? I set up in debian server's Award BIOS the following: * Integrated Peripherals / Onboard SuperIO Device / PWR Lost Resume State: Turnk On *Power Management Setup / Resume On PCI Event: Enabled *Power Management Setup / Resume On LAN: Enabled When the abowe mentioned PWR Lost Resume State was: Off, I can't too to wake up debian server with wakeonlan. I check that the power supply of the debian server has +5VSB / 2A and that is enough to use wake on lan. Why can't I wake up the debian server from the debian gateway with wakeonlan? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wakeonlan
Carl Fink [EMAIL PROTECTED] writes: On Sun, Apr 20, 2008 at 05:10:40AM +0200, [EMAIL PROTECTED] wrote: Wake On LAN wakes a system from poweroff. There is no need to suspend or hibernate. I red in the motherboard manual: ... It will allow the network to remotely power-on a Soft Power Off (Soft-Off) PC. However, if your system is in the Suspend mode, you can power-on the system only through an IRQ or DMA interrupt. I red here too: Important: The 5VSB power source of your power supply must support greater or equal 720 mA. I shall to see my power supply for that attribute. So, if I shut down the system with 'shutdown -t 1 -h now' then I have a Soft-Off PC, right? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wakeonlan
Paul Csanyi [EMAIL PROTECTED] writes: Carl Fink [EMAIL PROTECTED] writes: On Sun, Apr 20, 2008 at 05:10:40AM +0200, [EMAIL PROTECTED] wrote: Wake On LAN wakes a system from poweroff. There is no need to suspend or hibernate. I red in the motherboard manual: ... It will allow the network to remotely power-on a Soft Power Off (Soft-Off) PC. However, if your system is in the Suspend mode, you can power-on the system only through an IRQ or DMA interrupt. I red here too: Important: The 5VSB power source of your power supply must support greater or equal 720 mA. I have setup 'Enabled' in BIOS 'Power Management Setup' the 'Resume on PCI Event' too, soo finally I can to wake on from gateway/router my server box with wakeonlan. I must to give too the proper Broadcast address to my LAN. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
wakeonlan
Hello! I have a small network at home. I want to setup the gateway/router Debian Etch to wake up the server box with wakeonlan. The server box - Debian Etch has enabled the Resume on LAN field in the Power Management Setup of the Award BIOS. The server box have also a NIC with wake on LAN cable properly set up. When I run the command wakeonlan the server box wan't not to wake up. I use the right MAC address of the servers NIC in this command. Why can't I use wakeonlan to bring up the server from the gateway? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: wakeonlan
Andrei Popescu [EMAIL PROTECTED] writes: On Sat, Apr 19, 2008 at 09:41:14PM +0200, Paul Csanyi wrote: When I run the command wakeonlan the server box wan't not to wake up. I never used wake-on-lan, but I see from the description of the wakeonlan package that it used UDP packets in order to avoid the need for root. Maybe you should also try etherwake? Maybe I don't understand the description of wakeonlan: You can wake up WOL compliant Computers which have been powered down to sleep mode or start WOL compliant Computers with a BIOS feature. Well, if I power down the server with shutdown -t 1 -h now then I can't to wake it up with wakeonlan? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: time management software
2008/4/18, ChadDavis [EMAIL PROTECTED]: Can anybody recommend some software that tracks hours spent on tasks? I'm a software developer just looking for a simple piece of software, preferably in the debian distribution, that can do timekeeping chores for me. aptitude search time / task gtimer - GTK-based X11 task timer -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
postgresql 7.4 and 8.1 on the same system
Hello! I have installed on Debian Etch both postgresql 7.4 and 8.1. When I log in to the postgresql database with su postgres, how can I know, which one is used? Say, I want to log in to the postgresql 7.4, then which command to use? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: mounting error USB stick
2008/2/22, Paul Cartwright [EMAIL PROTECTED]: Now I am getting an error when I stick in my USB stick and check the box for mounting it. The error message says: Mount: wrong fs type, bad option, bad superblock on /dev/sdf, missing codepage or helper program, or in some cases useful info is found in syslog - try dmesg | tail FAT: Unrecognized mount option flush or missing value when I do a mount: ~# mount -t vfat /dev/sdf /media/sdf1 paulandcilla:~# mount /dev/sdf on /media/sdf1 type vfat (rw) it shows up. So how do I fix the automount error? here is /etc/mtab: /dev/sdf /media/sdf1 vfat rw 0 0 I have installed udev, and usbmount and have usbmount configured: usbmount.conf FILESYSTEMS=ext2 ext3 vfat MOUNTOPTIONS=sync,exec FS_MOUNTOPTIONS=-fstype=vfat,uid=1000,gid=1000,\ umask=022,exec,nosuid,dmask=0007,fmask=0117 \ is for line break, in the configuration file it does not exist. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: No printer in OOo
2008/2/4, Dotan Cohen [EMAIL PROTECTED]: On Debian etch, OOo2.3 was first installed, then a printer was added to the system. All programs can print, except OOo. In OOo, the only print listed is Generic Printer, and trying to print to it does not make a job appear in the KDE Print Jobs dialog. Needless to say, nothing printsץ OOo gives no errors, apparently OOo thinks that it printed. What must I check? Thanks in advance. In the Help of Openoffice menu there is an answer: You must use spadmin from the command prompt, to add a printer. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm
Re: nvidia driver question
2008/2/3, lostson [EMAIL PROTECTED]: I know this has probably been asked but, I really like debian I just am not fond of being way behind on certain apps. One is the nvidia driver, can one just download the nvidia drivers and install them instead of using the ancient ones on stable ? First, I should try on Debian way. I think, it depends on your video card, wether is it supported. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: format usb drive
2008/1/29, Russell L. Harris [EMAIL PROTECTED]: * Magnus Therning [EMAIL PROTECTED] [080129 03:07]: BartlebyScrivener wrote: [..] Can someone please tell me what command to use to elmininate any partitions on the usb drive and format it for moving files between Windows XP and Linux? I used gparted to format my usb drive to ext3. gparted can to format to fat32 too, so you can to try to format your usb drive with gparted. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
which kernel module for usb ethernet adapter?
Hello! I shall buy an usb-ethernet adapter for my laptop. Will works any usb-ethernet adapter with Debian Etch system? Which kernel module is for the usb-ethernet adapter: usbnet, or other? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
bootcd, boocdwrite, kernel with CD support built in
Hello! I want to use bootcd to write my Debian system onto a CD. That CD want then use to install this system on my old Toshiba laptop. The laptop requires other kernel, then my Pentium 4 machine. I think I must to build a custom kernel for this pourpose. I red man bootcdwrite and there stand this: It is important that the kernel can access the cdrom on the system, where you want to boot from the CD, without having to load any modules. (Because to load modules from CD, the kernel must have access to CD before). If this is not the case you have first to create a new kernel with CD-support built in. I have installed 2.6.18-5-686 SMP linux-image. I searched in config-2.6.18-5-686 file for the CD support line, but not shore whether I finded it. Is it the following lines? CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Symple method to transfer some packages from Desktop system to laptop Debian Etch system?
Hello! I have a Desktop Debian GNU/Linux Etch with network connection, and a laptop with installed only Debian GNU/Linux from netinstall.iso, but laptop has not network connection. I downloaded this netinst.iso and I want not to download any more CD iso files. Is it a method how to copy some more debian packages from my desktop Debian Etch to laptop Debian Etch, say with USB drive? I can't use apt-zip on laptop system because the netinst.iso CD does not have apt-zip package. The bootcd application can write only the whole system to laptop, but I want not this to do. Are there any other symple method to transfer some packages from my Desktop Debian Etch system to my laptop Debian Etch system? Any advice will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: using apt-zip
2008/1/24, Sven Joachim [EMAIL PROTECTED]: Hello Paul, On 2008-01-23 23:30 +0100, Paul Csanyi wrote: I did the following steps: sudo aptitude update mount /media/usb0 apt-zip-list -m /media/usb0 -a dist-upgrade mount /media/usb0 try to run in the usb0/ ./fetch-script-wget-debian-asztal but get error message: bash: ./fetch-script-wget-debian-asztal: /bin/sh: bad interpreter: Permission denied How can I solve this problem? My crystal ball tells me that your drive is mounted with the `noexec' option (this is the default for user-mountable devices). You need to mount /media/usb0 with the `exec' option, like this: # mount -o exec /media/usb0 You need to be root to to this, but you can also specify the `exec' option in /etc/fstab. See mount(8) for details. I am using usbmount, so I must edit usbmount.conf. Yes, there was a noexec option that I change now to exec. :) FS_MOUNTOPTIONS=uid=1000,gid=1000,umask=022,exec,\ nosuid,dmask=0007,fmask=0117 -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: using apt-zip
2008/1/24, Paul Csanyi [EMAIL PROTECTED]: 2008/1/24, Sven Joachim [EMAIL PROTECTED]: Hello Paul, On 2008-01-23 23:30 +0100, Paul Csanyi wrote: I did the following steps: sudo aptitude update mount /media/usb0 apt-zip-list -m /media/usb0 -a dist-upgrade mount /media/usb0 try to run in the usb0/ ./fetch-script-wget-debian-asztal but get error message: bash: ./fetch-script-wget-debian-asztal: /bin/sh: bad interpreter: Permission denied How can I solve this problem? My crystal ball tells me that your drive is mounted with the `noexec' option (this is the default for user-mountable devices). You need to mount /media/usb0 with the `exec' option, like this: # mount -o exec /media/usb0 You need to be root to to this, but you can also specify the `exec' option in /etc/fstab. See mount(8) for details. I am using usbmount, so I must edit usbmount.conf. Yes, there was a noexec option that I change now to exec. :) FS_MOUNTOPTIONS=uid=1000,gid=1000,umask=022,exec,\ nosuid,dmask=0007,fmask=0117 Also I setup here in the usbmount.conf the exec option: MOUNTOPTIONS=sync,exec,nodev,noatime -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
using apt-zip
Hello! I am using apt-zip to upgrade my old laptop from Etch testing (when I installed on tjis laptop Debian Etch, then Etch was in testing state) to Etch stable. I red the tutorial http://linuxbasics.org/tutorials/using/apt-zip and man apt-zip. I did the following steps: sudo aptitude update mount /media/usb0 apt-zip-list -m /media/usb0 -a dist-upgrade mount /media/usb0 try to run in the usb0/ ./fetch-script-wget-debian-asztal but get error message: bash: ./fetch-script-wget-debian-asztal: /bin/sh: bad interpreter: Permission denied How can I solve this problem? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problem with console and locales
2008/1/22, Florian Kulzer [EMAIL PROTECTED]: [ Please stop top-posting. ] On Mon, Jan 21, 2008 at 21:59:13 -0600, Alejandro Aguila Sáinz wrote: Hi, now I sent dpkg-reconfigure again and I get this: debian:/home/alekz# dpkg-reconfigure locales perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = Es_es, LC_ALL = Es_es, LANG = es_MX are supported and installed on your system. perl: warning: Falling back to the standard locale (C). [...] Generating locales (this might take a while)... es_MX.UTF-8... done es_MX.ISO-8859-1... done Generation complete. [...] Any idea? Thanks Run export LC_ALL=es_MX.UTF-8 LANG=es_MX.UTF-8 LANGUAGE=es_MX.UTF-8 right before you try dpkg-reconfigure locales again. Then make es_MX.UTF-8 the system-wide default. Afterwards log out, log in again and verify the settings by running locale. Then execute echo -e S\0303\0241inz and check if this prints your last name correctly. If you get two weird characters instead of the accented a, then your terminal does not understand UTF-8. If you get one placeholder character (a box or a question mark), then your font is missing the á symbol. Try console-setup tool too! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm
installing packages from iso file
Hello! I installed Debian Etch on a PC box with netinstall CD. Now I want to remove CD driver from this box. But I want before that to copy the netisntall.iso file to HDD on that box. So, when I have removed the CD drive, I want that, that apt can use this iso file to install some packages. How can I do that? I try Google, but cant find a solution. I think I must first to mount these netinstall.iso with loop device: mount -o loop -t iso9660 netinstall.iso /mnt/iso but this is not the right way because I want to automate this, so I think I must edit fstab for this issue: /dev/lo /media/cdrom0 iso9660 loop0 0 Then I must run 'apt-cdrom add', so I run it: LANG=en_EN sudo apt-cdrom add Success! Well, I think I find a solution, but what do you think, am I right? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
From linux software raid to none software raid?
Hello! I have installed Debian Etch with software raid 1. I am using for this two sata drives. Is it possyble to turn this system to non software raid? Doing so I wish to get the first sata drive to use with Debian Etch as non software raid, and to use second sata drive as a backup, and data drive. Any advice will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: From linux software raid to none software raid?
2008/1/15, Andrew Sackville-West [EMAIL PROTECTED]: On Tue, Jan 15, 2008 at 01:37:28PM +0100, Benjamin Schmidt wrote: Paul Csanyi wrote: I have installed Debian Etch with software raid 1. I am using for this two sata drives. Is it possyble to turn this system to non software raid? Doing so I wish to get the first sata drive to use with Debian Etch as non software raid, and to use second sata drive as a backup, and data drive. 1. Place your second harddisk to another bus (or plug it on over an usb-sata adapter) OR Remove in ~ /etc/mdadm the second disk. can't you just remove the second disk from mdadm and be done? I guess you should turn off the raid portions of the boot by update-rc.d -f mdadm-raid remove I've not tested this, so buyer beware. Before that it is good maybe to edit fstab like bellow. What do you think? # software raid # #/dev/md0/boot ext3defaults0 2 #/dev/md1noneswapsw 0 0 #/dev/md2/ ext3defaults,errors=remount-ro 0 1 #/dev/md3/home ext3defaults0 2 #/dev/md4/adatok ext3defaults0 2 # GNU/Linux # /dev/sda3 /boot ext3defaults0 2 /dev/sda5 noneswapsw 0 0 /dev/sda6 / ext3defaults,errors=remount-ro 0 1 /dev/sda7 /home ext3defaults0 2 /dev/sda8 /adatok ext3defaults0 2 these abowe corresponds togeather (each - others). -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: From linux software raid to none software raid?
2008/1/15, Douglas A. Tutty [EMAIL PROTECTED]: Well, since its raid1, everything on disk 2 is on disk one. Turn off the box, unplug disk 2, turn on the box. The box will run just fine with a degraded (one disk) raid1 array. Remove the failed disk from the array so that it isn't looking for it. How can I remove the failed disk from the array? Where can I do that? Maybe with mdam? I am reading now man mdadm. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ifconfig don't list interfaces
2008/1/13, Osamu Aoki [EMAIL PROTECTED]: On Sat, Jan 12, 2008 at 08:56:12PM +0100, Paul Csanyi wrote: I have changed my ethernet cards today and have difficulties with my interfaces because of udev. Anyway, did you adjusted /etc/udev/rules.d/z25_persistent-net.rules after changing card? I removed /etc/udev/rules.d/z25_persistent-net.rules and rebooted the system, but not help. I reinstall the system. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: strange behavior of etherneth cards
2008/1/12, Peter Greff [EMAIL PROTECTED]:
On Fri, 11 Jan 2008 23:24:10 +0100
Paul Csanyi [EMAIL PROTECTED] wrote:
Have a look at /etc/udev/rules.d/z25_persistent-net.rules. There you will
find something like
###
PCI device 0x10de:0x03ef (forcedeth)
SUBSYSTEM==net, DRIVERS==?*, ATTRS{address}==00:19:66:3e:7d:bd,
NAME=eth0
###
Debian/UDEV holds the MAC-addresses to assign the correct eth-device
number e.g. eth0 to always the same card. So if you remove the card you
have to remove the named file or better move it to another place for
testing. It will be recreated after you reboot your system if not
present. I assume you are using Debian Etch.
I did as you advices me, and get to work my ethernet cards. :)
Yes, I am using Debian Etch. :)
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
ifconfig don't list interfaces
Hello! ifconfig don't list interfaces on my Debian Etch system. sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:7dff:fefc:1ab2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:468 (468.0 b) Interrupt:10 Base address:0xdc00 eth1 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B0 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 Érvénytelen utasítás This is on hungarian and mean something like: invalid command If I run this command again, I get another error message, shorter: $ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 Érvénytelen utasítás invalid command ans so on. I get the 1. or the 2. message, if I iterate this command. Why this happen? I have changed my ethernet cards today and have difficulties with my interfaces because of udev. udev remarks ethernet cards.. I have besides this another problem. I cant set up on my home network dhcp3-server so that the dhcp3-server give a fixed address to my debian-server system on my DMZ subnet. The same setup works fine before I remove and reconfigure ethernet cards on my gatewai/router. Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm
Vá: aptitude reinstall from file contained package names?
2008/1/9, Douglas A. Tutty [EMAIL PROTECTED]: On Wed, Jan 09, 2008 at 02:37:30PM +0100, Paul Csanyi wrote: Now I want to reinstall all these packages listed in 'installed_packages' file, with aptitude. I've never tried that automatically with aptitude and checking the man page suggests that its not possible. I tried but have not success. If what you asked for really worked, then you would loose the main benefit of aptitude: keeping track of shifting dependancies and cruft controll. Everything would appear to be automatically installed. After all, I use aptitude to reinstall everything. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
strange behavior of etherneth cards
Hello! I have an old PC box that I use as router / gateway. So far it works well. There was three etherneth cards in this box: eth0 was for my 1. ISp that I use no any more eth1 was for my LAN eth2 was for my DMZ Today I change these ethernet cards abowe. I remove eth0 and move it to my server machine because I want to set up wake on lan. So I want to start this server with wakeonlan package. This ethernet card, that was the eth0 on gateway has the capability to wak on lan. So after this set up I boot on the gateway. I try to set up network interfaces eth1 and eth2 and to remove eth0 from /etc/network/interfaces. When I restarted networking, I can't to get eth2 up. And that is not all. I can't anymore ping my server nor reach the web page there. Then I try to put the 4. ethernet on gateway to tidy of the previous eth0 card. I can't to get eth0 up. I can't to get working anymore my home network. Why this happen? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: V?: aptitude reinstall from file contained package names?
2008/1/12, Douglas A. Tutty [EMAIL PROTECTED]: On Fri, Jan 11, 2008 at 09:47:21PM +0100, Paul Csanyi wrote: 2008/1/9, Douglas A. Tutty [EMAIL PROTECTED]: On Wed, Jan 09, 2008 at 02:37:30PM +0100, Paul Csanyi wrote: If what you asked for really worked, then you would loose the main benefit of aptitude: keeping track of shifting dependancies and cruft controll. Everything would appear to be automatically installed. After all, I use aptitude to reinstall everything. You mean that you mark __every__ package as manually installed? No, I mean I used aptitude from a visual interface and there search for the installed packages. When I find one, I hit Shift + L to mark it for reinstall. If I mark too many packages, it happen that that aptitude can't to reinstall them all together. When I tried to reinstall all installed packages from a file that contains the names of installed packages, it happen the same. Aptitude can't to reinstall all installed packages all together. So I decided to use aptitude from a visual interface for this task. I did this job within 1 hour or so. :) -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
aptitude reinstall from file contained package names?
Hello! I do on my home server aptitude search ~i installed_packages Now I want to reinstall all these packages listed in 'installed_packages' file, with aptitude. How can I do that? I tried: # aptitude reinstall installed_packages but nothing happen. Any advice will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: aptitude reinstall from file contained package names?
2008/1/9, Douglas A. Tutty [EMAIL PROTECTED]: On Wed, Jan 09, 2008 at 02:37:30PM +0100, Paul Csanyi wrote: I do on my home server aptitude search ~i installed_packages Now I want to reinstall all these packages listed in 'installed_packages' file, with aptitude. How can I do that? I've never tried that automatically with aptitude and checking the man page suggests that its not possible. I checked the man page too and find nothing about installing from a file that being containing the list of installed packages. If what you asked for really worked, then you would loose the main benefit of aptitude: keeping track of shifting dependancies and cruft controll. Everything would appear to be automatically installed. I just want to reinstall everything installed on that system with one command. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
awk FIELDWIDTHS howto?
Hello!
I try to use awk to print second field from a text file
but awk prints a part of 1. field as a 2. field. Why?
aptitude search ~i | awk '{ NF = 2 } { FIELDWIDTHS = 4 32 }
{print $2}' foltelepitett_debian_csomagok
less foltelepitett_debian_csomagok
..
bsdmainutils
bsdutils
busybox
A
ca-certificates
checksecurity
..
Any advices will be appreciated!
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Vá: awk FIELDWIDTHS howto?
2008/1/9, Sergio Cuéllar Valdés [EMAIL PROTECTED]:
2008/1/9, Paul Csanyi [EMAIL PROTECTED]:
I try to use awk to print second field from a text file
but awk prints a part of 1. field as a 2. field. Why?
aptitude search ~i | awk '{ NF = 2 } { FIELDWIDTHS = 4 32 }
{print $2}' foltelepitett_debian_csomagok
less foltelepitett_debian_csomagok
..
bsdmainutils
bsdutils
busybox
A
ca-certificates
checksecurity
A record is like these:
i busybox - Tiny utilities for small and embedded syst
i A bzip2 - high-quality block-sorting file compressor
|
1234123456789etc.
1. |2.
I try to get only the package name from the 2. field.
FIELDWIDTHS = 4 32
The given width for 1. field (4) should be right, but isn't.
Awk give me the letter A as a 2. field. Why?
something like this: aptitude search ~i | cut -d -f2
does this help you ?
No.
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
Vá: Vá: awk FIELDWIDTHS howto?
2008/1/9, Sergio Cuéllar Valdés [EMAIL PROTECTED]:
2008/1/9, Paul Csanyi [EMAIL PROTECTED]:
2008/1/9, Sergio Cuéllar Valdés [EMAIL PROTECTED]:
2008/1/9, Paul Csanyi [EMAIL PROTECTED]:
I try to use awk to print second field from a text file
but awk prints a part of 1. field as a 2. field. Why?
aptitude search ~i | awk '{ NF = 2 } { FIELDWIDTHS = 4 32 }
{print $2}' foltelepitett_debian_csomagok
less foltelepitett_debian_csomagok
..
bsdmainutils
bsdutils
busybox
A
ca-certificates
checksecurity
A record is like these:
i busybox - Tiny utilities for small and embedded syst
i A bzip2 - high-quality block-sorting file compressor
|
1234123456789etc.
1. |2.
I try to get only the package name from the 2. field.
FIELDWIDTHS = 4 32
The given width for 1. field (4) should be right, but isn't.
Awk give me the letter A as a 2. field. Why?
So, if you only need package name:
aptitude search ~i | cut -d -f3
It is cut, not awk.
Howewer, it is not god. The output file contains empty lines
besides of the package names.
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
Vá: awk FIELDWIDTHS howto?
2008/1/9, Daniel Mahoney [EMAIL PROTECTED]:
I think I'm missing something here. Why are you doing the FIELDWIDTHS
thing when you can just split on whitespace? Won't something like:
aptitude search ~i | awk '{print $2}'
give you what you want?
No.
The records for awk are like these lines, derived from
'aptitude search ~i' :
...
i cpio- GNU cpio -- a program to manage archives
i A cpp - The GNU C preprocessor (cpp)
i A cpp-4.1 - The GNU C preprocessor
...
So, (from the abowe example)
in the 1. record:
the 1. field is 'i', the 2. field is 'cpio', the 3. field is '-', etc.
in the 2. record:
the 1. field is 'i', the 2. field is 'A', the 3. field is 'cpp', etc.
in the 3. record:
the 1. field is 'i', the 2. field is 'A', the 3. field is 'cpp-4.1', etc.
So the command here:
aptitude search ~i | awk '{print $1 $2 $3 $4}' \
foltelepitett_debian_csomagok
give to me these:
i cpio - GNU
i A cpp -
i A cpp-4.1 -
and the command:
aptitude search ~i | awk '{print $2}' \
foltelepitett_debian_csomagok
give to me these:
cpio
A
A
So, why don't works FIELDWIDTHS as I would to expect?
If I give to awk { FIELDWIDTHS = 4 32} why give to me these:
cpio
A
A
with command:
aptitude search ~i | awk '{ FIELDWIDTHS = 4 32}\
{print $2}' foltelepitett_debian_csomagok
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Vá: awk FIELDWIDTHS howto?
2008/1/9, [EMAIL PROTECTED] [EMAIL PROTECTED]:
On 9 Jan, Sergio Cuéllar Valdés wrote:
2008/1/9, Paul Csanyi [EMAIL PROTECTED]:
2008/1/9, Sergio Cuéllar Valdés [EMAIL PROTECTED]:
2008/1/9, Paul Csanyi [EMAIL PROTECTED]:
I try to use awk to print second field from a text file
but awk prints a part of 1. field as a 2. field. Why?
aptitude search ~i | awk '{ NF = 2 } { FIELDWIDTHS = 4 32 }
{print $2}' foltelepitett_debian_csomagok
less foltelepitett_debian_csomagok
..
bsdmainutils
bsdutils
busybox
A
ca-certificates
checksecurity
A record is like these:
i busybox - Tiny utilities for small and embedded syst
i A bzip2 - high-quality block-sorting file compressor
|
1234123456789etc.
1. |2.
I try to get only the package name from the 2. field.
FIELDWIDTHS = 4 32
The given width for 1. field (4) should be right, but isn't.
Awk give me the letter A as a 2. field. Why?
It seem that gawk is behaving weirdly when using FIELDWIDTHS. It splits
the input line into one less field that the number given.
Is this a bug that should be reported? Try this:
I don't know.
$ aptitude search ~i | awk 'BEGIN {FIELDWIDTHS=4 32 1} {print $2}' | head
acpi
adduser
alsa-base
alsa-utils
amarok
amarok-engines
amarok-xine
apt
apt-build
apt-doc
Thank you!
--
Regards, Paul Csanyi
http://www.freewebs.com/csanyi-pal/index.htm
Vá: awk FIELDWIDTHS howto?
2008/1/9, Florian Kulzer [EMAIL PROTECTED]: You can tell aptitude that you want a list of only the package names: aptitude -F%p search ~i Thank you! I should read better the aptitude man pages! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Anyone run nvidia driver + latest xorg 7.3?
Hello! 2008/1/4, Hugo Vanwoerkom [EMAIL PROTECTED]: I am getting an X server crash after upgrading xorg on Sid to 7.3: It seems that that nvidia driver doesn't works still on SID? I try to use nvidia driver on Etch, but without success. I think about to upgrade to SID, but now, well, I don't know.. Look here my shot to solve this problem with nvidia driver! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Anyone run nvidia driver + latest xorg 7.3?
2008/1/4, Hugo Vanwoerkom [EMAIL PROTECTED]: Paul Csanyi wrote: 2008/1/4, Hugo Vanwoerkom [EMAIL PROTECTED]: I am getting an X server crash after upgrading xorg on Sid to 7.3: It seems that that nvidia driver doesn't works still on SID? I try to use nvidia driver on Etch, but without success. I think about to upgrade to SID, but now, well, I don't know.. Look here my shot to solve this problem with nvidia driver! Where? Sorry, I was in a hurry. Here: http://www.debiantutorials.org/talkitup/index.php?topic=39.msg2630#msg2630 And Etch cannot have this problem because it occurs only with the latest Xorg: Lenny (but I don't have that) and Sid. OK -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Anyone run nvidia driver + latest xorg 7.3?
2008/1/4, steef [EMAIL PROTECTED]: Paul Csanyi wrote: 2008/1/4, Hugo Vanwoerkom [EMAIL PROTECTED]: I am getting an X server crash after upgrading xorg on Sid to 7.3: It seems that that nvidia driver doesn't works still on SID? I try to use nvidia driver on Etch, but without success. I think about to upgrade to SID, but now, well, I don't know.. Look here my shot to solve this problem with nvidia driver! hey, the latest nvidia-driver *from their site* works fine under etch Not with my video card and CPU! :( -- Regards, Paul Csanyi Üdv. isaaca http://www.freewebs.com/csanyi-pal/index.htm
How to set up remote access to postgresql with md5 password?
Hello! I will to set up my home network so so I can to connect from LAN to postgresql server on DMZ. I can to connect to the postgresql server when I set up pg_hba.conf with 'trust' method, but can't to connect to it with 'md5' method. What is the solution? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Any knowledge base that can use with Emacs?
Hello! Do you know any knowledge base that can use with Emacs? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PREEMPT kernel with nvidia
Hi, 2008/1/1, Hugo Vanwoerkom [EMAIL PROTECTED]: Paul Andreassen wrote: Is it possible to have a PREEMPT kernel while using the closed source nVidia driver? I've compiled the stable kernel 2.6.18 and the backported kernel 2.6.22, and both kill random programs. Its strange because it some times kills the game I'm running, sometime faults on boot up and once gcc actually died. I have the problem with nvidia driver too. If you want, have a look at here: http://www.debiantutorials.org/talkitup/index.php?topic=39.msg2630#msg2630 If this preempt kernel solve my problem too, then should be good! Which video card, and CPU do you have? [EMAIL PROTECTED]:/sdb1$ uname -a Linux debian 2.6.23-1-686 #1 SMP PREEMPT Sun Dec 9 10:02:52 CST 2007 i686 GNU/Linux From where can I download this preempt kernel? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: free news servers
2007/12/29, Frank [EMAIL PROTECTED]: Please tell me good and free news servers, where can I read the debian lists. (linux.debian.user) The freetext.usenetserver.com is now dead. news.edisontel.com also unreliable. Html version is not good, only news format. news.gmane.org -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
how to give remote access through ssh login only to my /home/user/some/ directory?
Hello! How can I give someone remote access through ssh login only to my /home/user/some/ directory? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Vá: Using wdm how to pass -- -logverbose 6 to startx?
2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: On Thu, Dec 27, 2007 at 10:09:09PM +0100, Paul Csanyi wrote: 2007/12/27, Andrew Sackville-West [EMAIL PROTECTED]: On Thu, Dec 27, 2007 at 08:18:34PM +, Paul Csanyi wrote: Thu, 27 Dec 2007 11:49:41 -0800 keltezéssel Andrew Sackville-West azt írta: On Thu, Dec 27, 2007 at 07:10:58PM +, Paul Csanyi wrote: ... I must to start X Window with: startx -- -logverbose 6 but can't. I can only start X with wdm. I'm sure there is a way to do this in wdm, but since I don't use it, I can't comment specifically on that. But then how can I pass the parameter to startx? why not just disable wdm for the moment and use startx directly? update-rc.d -f wdm remove as root should do it, then you can just log in to a VT and startx from there. I traied that following your advice, but just can't to start X with startx. Paul, you really need to provide more information than this. What happens when you type startx? please provide the exact output. I post it as attachment. Your Xorg.0.log looks fine to me. So what exactly happens when you type startx? maybe you don't have a window manager selected? How have you selected your window manager before, using wdm? When I type startx then it runs and on the end I get a blank screen and then I get the Virtual Terminal back again. This was yesterday. Today I purge the wdm, xserver-xorg, and install xserver-xorg but without wdm again. I try now to get X Window with startx, but without success. I post the Xorg.0.log.bz2 again, if that help. I think I go to reinstall the Etch system. :( -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm Xorg.0.log.bz2 Description: BZip2 compressed data
Re: Using wdm how to pass -- -logverbose 6 to startx?
From: Paul Csanyi [EMAIL PROTECTED] Date: Fri, 28 Dec 2007 17:05:30 +0100 Subject: Vá: Using wdm how to pass -- -logverbose 6 to startx? To: debian-user@lists.debian.org 2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: On Thu, Dec 27, 2007 at 10:09:09PM +0100, Paul Csanyi wrote: 2007/12/27, Andrew Sackville-West [EMAIL PROTECTED]: On Thu, Dec 27, 2007 at 08:18:34PM +, Paul Csanyi wrote: Thu, 27 Dec 2007 11:49:41 -0800 keltezéssel Andrew Sackville-West azt írta: On Thu, Dec 27, 2007 at 07:10:58PM +, Paul Csanyi wrote: ... I must to start X Window with: startx -- -logverbose 6 but can't. I can only start X with wdm. I'm sure there is a way to do this in wdm, but since I don't use it, I can't comment specifically on that. But then how can I pass the parameter to startx? why not just disable wdm for the moment and use startx directly? update-rc.d -f wdm remove as root should do it, then you can just log in to a VT and startx from there. I traied that following your advice, but just can't to start X with startx. Paul, you really need to provide more information than this. What happens when you type startx? please provide the exact output. I post it as attachment. Your Xorg.0.log looks fine to me. So what exactly happens when you type startx? maybe you don't have a window manager selected? How have you selected your window manager before, using wdm? When I type startx then it runs and on the end I get a blank screen and then I get the Virtual Terminal back again. This was yesterday. Today I purge the wdm, xserver-xorg, and install xserver-xorg but without wdm again. I try now to get X Window with startx, but without success. I think I go to reinstall the Etch system. :( -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm
Vá: Using wdm how to pass -- -logverbose 6 to startx?
2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: On Fri, Dec 28, 2007 at 05:05:30PM +0100, Paul Csanyi wrote: 2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: Your Xorg.0.log looks fine to me. So what exactly happens when you type startx? maybe you don't have a window manager selected? How have you selected your window manager before, using wdm? When I type startx then it runs and on the end I get a blank screen and then I get the Virtual Terminal back again. Paul, if you want help, you need to be patient. THe behavior above is normal. Your X was working, you just didn't have a WM set as the default, or setup in ~/.xinitrc. This was yesterday. Today I purge the wdm, xserver-xorg, and install xserver-xorg but without wdm again. why did you purge it? it was working. I try now to get X Window with startx, but without success. Again, in *what way* are you not having success? you Xorg.0.log again looks ust fine. You are still facing the same problem as above. Please answer the following questions and I'll help you. WHat window manager do you want to use? I want to use Window Maker. What is the output of (as root): update-alternatives --config x-window-manager There is only 1 program which provides x-window-manager (/usr/bin/wmaker). Nothing to configure. you'll need to just press enter to keep it as currently set. Do you have a ~/.xinitrc or ~/.xsession file? if so, what are the contents? I have not .xinitrc less ~/.xsession is: #!/bin/bash ##[Desktop Entry] #Encoding=hu_HU #Name=Window maker #Comment=This session logs you into Window Maker #Exec=/usr/bin/wmaker ## no icon yet, only the top three are currently used #Icon= #Type=Application -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Vá: Using wdm how to pass -- -logverbose 6 to startx?
2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: On Fri, Dec 28, 2007 at 07:02:46PM +0100, Paul Csanyi wrote: 2007/12/28, Andrew Sackville-West [EMAIL PROTECTED]: WHat window manager do you want to use? I want to use Window Maker. What is the output of (as root): update-alternatives --config x-window-manager There is only 1 program which provides x-window-manager (/usr/bin/wmaker). Nothing to configure. okay. interesting, my understanding is that *should* just work, but regardless here is one solution: create a new ~/.xinitrc file and put in it the following: exec /usr/bin/wmaker x-terminal-emulator save the file and try startx. you *should* get a working wmaker session and if wmaker somehow fails, you'll instead get whatever the default x-terminal-emulator is in a bare X session. Either way, based on the logs you've sent, and the information you've provided, you should be up and running. Yes, my problem is solved, thanks to you! :) -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Using wdm how to pass -- -logverbose 6 to startx?
Hello! My displaymanager is wdm on Debian Etch system. Because my X Window crashes frequently (nvidia driver woth GeForce 7600 GT card and Intel Core 2 Duo CPU), I must to investigate the reason. I must to start X Window with: startx -- -logverbose 6 but can't. I can only start X with wdm. But then how can I pass the parameter to startx? Any advicess will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using wdm how to pass -- -logverbose 6 to startx?
Thu, 27 Dec 2007 11:49:41 -0800 keltezéssel Andrew Sackville-West azt írta: On Thu, Dec 27, 2007 at 07:10:58PM +, Paul Csanyi wrote: Hello! My displaymanager is wdm on Debian Etch system. Because my X Window crashes frequently (nvidia driver woth GeForce 7600 GT card and Intel Core 2 Duo CPU), I must to investigate the reason. I must to start X Window with: startx -- -logverbose 6 but can't. I can only start X with wdm. I'm sure there is a way to do this in wdm, but since I don't use it, I can't comment specifically on that. But then how can I pass the parameter to startx? why not just disable wdm for the moment and use startx directly? update-rc.d -f wdm remove as root should do it, then you can just log in to a VT and startx from there. I traied that following your advice, but just can't to start X with startx. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using wdm how to pass -- -logverbose 6 to startx?
2007/12/27, Andrew Sackville-West [EMAIL PROTECTED]: On Thu, Dec 27, 2007 at 08:18:34PM +, Paul Csanyi wrote: Thu, 27 Dec 2007 11:49:41 -0800 keltezéssel Andrew Sackville-West azt írta: On Thu, Dec 27, 2007 at 07:10:58PM +, Paul Csanyi wrote: ... I must to start X Window with: startx -- -logverbose 6 but can't. I can only start X with wdm. I'm sure there is a way to do this in wdm, but since I don't use it, I can't comment specifically on that. But then how can I pass the parameter to startx? why not just disable wdm for the moment and use startx directly? update-rc.d -f wdm remove as root should do it, then you can just log in to a VT and startx from there. I traied that following your advice, but just can't to start X with startx. Paul, you really need to provide more information than this. What happens when you type startx? please provide the exact output. I post it as attachment. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm Xorg.0.log.bz2 Description: BZip2 compressed data
How to install subsequent kernel than linux-image-2.6.18 on debian way?
Hello! My system is Debian Etch, with linux-image-2.6.18-5-686 SMP. I want to upgrade my kernel, but in the repository can't find subsequent linux-image. What can I to do to get and install subsequent kernel on Etch than linux-image-2.6.18 on debian way? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to install subsequent kernel than linux-image-2.6.18 on debian way?
Wed, 26 Dec 2007 16:39:51 +0100 keltezéssel s. keeling azt írta: Paul Csanyi [EMAIL PROTECTED]: My system is Debian Etch, with linux-image-2.6.18-5-686 SMP. I want to upgrade my kernel, but in the repository can't find subsequent linux-image. You are aware that Debian Stable kernels are continuously updated with security patches, yes? Is there other functionality you need in later kernels? I have ASUS P5N-E SLI NVIDIA motherboard, Intel Core 2 Duo CPU and MSI nVidia NX7600GT videocard. When I use nvidia driver, the X Window freeze and I can only to reset my PC box. I search for solution and find here advices, but not the solution: http://www.nvnews.net/vbulletin/showthread.php?t=58498 I did the following from there: boot the system with pci=nommconf idle=poll maxcpus=1 kernel parameters I edit the grub/menu.lst like: # kopt=root=/dev/md2 ro pci=nommconf idle=poll maxcpus=1 Is it OK? I don't know how to make certain that these parameters are set up indeed? I edit xorg.conf like in the Section Device: Option NvAGP 0 to see if this eliminates the instability, but did not. So, my system crash frequently. I hope so that I can somehow to solve this problem. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
How can I know whether is Intel Core 2 CPU with EM64T extension? cat /proc/cpuinfo don't show this
Hello! I red on the web page http://www.debian.org/ports/amd64/ that: The port consists of a kernel for all AMD 64bit CPUs with AMD64 extension and all Intel CPUs with EM64T extension, .. Before I go to download and install amd64 Debian distribution, I whish to know that my Intel(R) Core(TM)2 CPU is with EM64T extension. cat /proc/cpuinfo don't show this feature: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping: 6 cpu MHz : 1866.662 cache size : 4096 KB physical id : 0 siblings: 2 core id : 0 cpu cores : 2 fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge \ mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm \ pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips: 3737.97 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping: 6 cpu MHz : 1866.662 cache size : 4096 KB physical id : 0 siblings: 2 core id : 1 cpu cores : 2 fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge \ mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm \ pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips: 3733.44 How can I know whether is Intel Core 2 CPU with EM64T extension? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How can I know whether is Intel Core 2 CPU with EM64T extension? cat /proc/cpuinfo don't show this
Sun, 23 Dec 2007 11:33:43 +0100 keltezéssel Paul Csanyi azt írta: Hello! I red on the web page http://www.debian.org/ports/amd64/ that: The port consists of a kernel for all AMD 64bit CPUs with AMD64 extension and all Intel CPUs with EM64T extension, .. Before I go to download and install amd64 Debian distribution, I whish to know that my Intel(R) Core(TM)2 CPU is with EM64T extension. How can I know whether is Intel Core 2 CPU with EM64T extension? Well this was a stupid question, sorry! The answer can be find with Google, and yes, Intel Core 2 CPU is with EM64T extension. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Wich Debian system with Intel Core 2 CPU: i386 or amd64?
Hello! I have installed Debian Etch on my hardware with Intel Core 2 CPU. In the repository I have linux-image-2.6.18-5-amd64 and now I have it installed. I think I can use it with Debian Etch system, and don't must download and install the debian amd64 distribution, right? For what reason should I download and install debian amd64 distribution? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Wich Debian system with Intel Core 2 CPU: i386 or amd64?
Sun, 23 Dec 2007 17:04:43 +0200 keltezéssel Micha azt írta: For what reason should I download and install debian amd64 distribution? unless you are doing memory intensive calculations or have a lot of memory (I would say that probably 3+ GB although some say more), you're probably better of with the i386 distribution. OK but I try to use Debian Etch i386 arch with linux-image-2.6-amd64. I think I must use this linux-image because of my Intel Core 2 CPU. So I try to install nvidia driver for my nvidia card (from lspci) nVidia Corporation G70 [GeForce 7600 GT] but get an error message: module-assistant, interactive mode Build of the package nvidia-kernel-source failed! How do you wish to proceed? VIEW Examine the build log file OK ... LD [M] /usr/src/modules/nvidia-kernel/nv/nvidia.o ld: Relocatable linking with relocations from format elf32-i386 \ (/usr/src/modules/nvidia-kernel/nv/nv-kernel.o) to format \ elf64-x86-64 (/usr/src/modules/nvidia-kernel/nv/nvidia.o) is not \ supported make[4]: *** [/usr/src/modules/nvidia-kernel/nv/nvidia.o] Error 1 make[3]: *** [_module_/usr/src/modules/nvidia-kernel/nv] Error 2 make[3]: Leaving directory `/usr/src/linux-headers-2.6.18-5-amd64' NVIDIA: left KBUILD. nvidia.ko failed to build! make[2]: *** [mdl] Error 1 make[2]: Leaving directory `/usr/src/modules/nvidia-kernel/nv' make[1]: *** [build-stamp] Error 2 make[1]: Leaving directory `/usr/src/modules/nvidia-kernel' make: *** [kdist_image] Error 2 What this error mean? Must I leave the i386 arch and install amd64 before can proceed with nvidia install? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: closest to eagle
2007/12/15, Amit Uttamchandani [EMAIL PROTECTED]: On Sat, 15 Dec 2007 11:30:10 +0100 abdelkader belahcene [EMAIL PROTECTED] wrote: I am looking for the closest free software to eagle ( electonic Printed circuit board design tool). Check out the gEDA package. It includes an PCB board design tool if I'm not mistaken. Check it out at geda.seul.org Or try KiCAD. It is easier than gEDA because of the GUI that KiCAD uses. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: import in kino from screen recording tools (avi, mov, ?)
Hello! 2007/12/12, Peter Werner [EMAIL PROTECTED]: On Wed, Dec 12, 2007 at 10:36:41PM +0100, Paul Csanyi wrote: But I can't to import them on Debian Etc with kino. I get an error message: Failed to load media file /dfat32/Iskola/SketchUp video folveteleim/sketchup.avi.dv or Failed to load media file /dfat32/Iskola/SketchUp video \ folveteleim/SketchUp_folvetelem.mov.dv AFAIK kino can only use dv files, so in converts any imported files to dv before processing. your problem now seems to be, that you can't write in /dfat32/Iskola/SketchUp video folveteleim/ please check weather it is mounted read-only, has the wrong permissions or has no free space left. Now I have moved the SketchUp_folvetelem.mov file in my /home/username/Kino/ directory and try to import it from there in to the Kino, but get the same error message: Failed to load media file /home/csanyipal/Kino/sketchup.avi.dv The /home/ directory have 7.21 GB free space left, it is mounted read/write, and /home/username/Kino/ have usual permissons: 755. Are there some application that can to convert avi, or mov format in to the dv format? -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
import in kino from screen recording tools (avi, mov, ?)
Hello! Debian Etch is my system. I have installed kino and I want with it to edit some screen recording videos. The screen recording I have done on win 32 with free software, like krut, camstudio, icord, taksi. These screen recording tools can to save video files in avi mov formats. But I can't to import them on Debian Etc with kino. I get an error message: Failed to load media file /dfat32/Iskola/SketchUp video folveteleim/sketchup.avi.dv or Failed to load media file /dfat32/Iskola/SketchUp video \ folveteleim/SketchUp_folvetelem.mov.dv Does anybody know the solution for this situatiton? Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: UPS
Mon, 03 Dec 2007 17:10:17 -0500 keltezéssel Paul Cartwright azt írta: On Mon December 3 2007, Paul Csanyi wrote: does your apcupsd start at boot? I can't seem to get mine to work, I have to manually start it with apcupsd Yes, on my Debian Etch system apcupsd start at boot. I edited the /etc/default/apcupsd to ISCONFIGURED=yes mine is already setup with that line. I have the file here: /etc/init.d/apcupsd and I can run it as root with # /etc/init.d/apcupsd start or restart, or stop If you have the Debian GNU/Linux Etch system, you should to reinstall apcupsd with # aptitude reinstall apcupsd command! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: UPS
2007/12/3, Tom Allison [EMAIL PROTECTED]: So -- what's a working combination of UPS and software? What to avoid? I use Back-UPS CS 500 with apcupsd debian package. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: UPS
2007/12/3, Paul Cartwright [EMAIL PROTECTED]: On Mon December 3 2007, Paul Csanyi wrote: I use Back-UPS CS 500 with apcupsd debian package. does your apcupsd start at boot? I can't seem to get mine to work, I have to manually start it with apcupsd Yes, on my Debian Etch system apcupsd start at boot. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: UPS
Mon, 03 Dec 2007 20:01:49 +0100 keltezéssel Paul Csanyi azt írta: 2007/12/3, Paul Cartwright [EMAIL PROTECTED]: On Mon December 3 2007, Paul Csanyi wrote: I use Back-UPS CS 500 with apcupsd debian package. does your apcupsd start at boot? I can't seem to get mine to work, I have to manually start it with apcupsd Yes, on my Debian Etch system apcupsd start at boot. I edited the /etc/default/apcupsd to ISCONFIGURED=yes -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Can't to install postgresql-7.4 server on Etch
Sat, 01 Dec 2007 16:48:32 +0100 keltezéssel Paul Csanyi azt írta: Hello! On my Debian Etch server I can't to install postgresql-7.4 server. I get the error message: - Setting up postgresql-7.4 (7.4.17-0etch1) ... ... Error: Could not parse locale out of pg_controldata output failed! I try to search the solution with Google but find not any hint. Still I find the solution with Google, here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=403239 So, after I set up correctly the locale on the system, I can to install postgresql-7.4 server on Etch. :) $ locale LANG=hu_HU LC_CTYPE=hu_HU LC_NUMERIC=hu_HU LC_TIME=hu_HU LC_COLLATE=hu_HU LC_MONETARY=hu_HU LC_MESSAGES=hu_HU LC_PAPER=hu_HU LC_NAME=hu_HU LC_ADDRESS=hu_HU LC_TELEPHONE=hu_HU LC_MEASUREMENT=hu_HU LC_IDENTIFICATION=hu_HU LC_ALL= -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Can't to install postgresql-7.4 server on Etch
Hello! On my Debian Etch server I can't to install postgresql-7.4 server. I get the error message: - Setting up postgresql-7.4 (7.4.17-0etch1) ... Starting PostgreSQL 7.4 database server: main* pg_controldata: could not open file /var/lib/postgresql/7.4/main/global/pg_control for reading: No such file or directory Error: Could not parse locale out of pg_controldata output failed! invoke-rc.d: initscript postgresql-7.4, action start failed. dpkg: error processing postgresql-7.4 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: postgresql-7.4 E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up postgresql-7.4 (7.4.17-0etch1) ... Starting PostgreSQL 7.4 database server: main* pg_controldata: could not open file /var/lib/postgresql/7.4/main/global/pg_control for reading: No such file or directory Error: Could not parse locale out of pg_controldata output failed! invoke-rc.d: initscript postgresql-7.4, action start failed. dpkg: error processing postgresql-7.4 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: postgresql-7.4 - I try to search the solution with Google but find not any hint. Any advices will be appreciated! -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: Programming Robots
2007/11/29, Sergio Cuéllar Valdés [EMAIL PROTECTED]: 2007/11/29, Thomas H. George [EMAIL PROTECTED]: My college student grandson says he wants to study programming robots. Aside from all the commercial (game?) kits are there serious Linux applications that he should consider? If so, how best to get started? Tom Hello, wow ! great for your grandson, and you for supporting him. What kind of robot does he have ? A Lego Mindstorm ? Or does he want to build his own robot ? For example those that follows light or a white line ... Best regards, Sergio For me the question is also interesting. I have Lego Mindstorms. -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm
Re: Newsgroup
Sun, 11 Nov 2007 09:48:50 +0100 keltezéssel Pál Csányi azt írta: 2007/11/10, Ralph Katz [EMAIL PROTECTED]: On 11/10/2007 03:22 PM, Pál Csányi wrote: 2007/11/10, Kamaraju S Kusumanchi [EMAIL PROTECTED]: Using linux.debian.user is possible only if you have access to a news server. For me that is not the case. So I use the free http://gmane.org 's server using which almost all the debian mailing lists can be read as news groups. I try this with Pan but I dont know how to set up Pan to http://gmane.org 's nntp server? The news server is news.gmane.org on the default port 119. It works! :) Only I don't know how to see the subpoened () lines? OK I find it: View / Body Pane / Mute Quoted Text Q -- Regards, Paul -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
