Re: ERROR: error 65280 occurred while making home/user/aoo/main/svx/prj
: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/xtextit0.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoom_def.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoomctrl.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoomitem.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoomsliderctrl.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoomslideritem.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/svx.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/svxitems.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/xoitems.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/lib/libsvx.so' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/lib/libsvxcore.so' has a high resolution time stamp make: *** No rule to make target `/home/ivan/aoo/main/svx/inc/svx/xftsfit.hxx', needed by `/home/ivan/aoo/main/solver/400/ unxlngi6.pro/workdir/CxxObject/svx/source/svdraw/svdcrtv.o'. Stop. dmake: Error code 2, while making 'all' 1 module(s): svx need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/svx/prj When you have fixed the errors in that module you can resume the build by running: build --all:svx ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/instsetoo_native$ Kay says: This file: / main / svx / inc / svx / xftsfit.hxx does not exist in AOO. So what can be the solution? 2013/5/18 Kay Schenk kay.sch...@gmail.com On Fri, May 17, 2013 at 3:10 PM, jorge ivan poot diaz ivan.pootd...@gmail.com wrote: Hello, I have the following error when I build AOO: http://ooo.pastebin.ca/2377453 I'm building on Ubuntu. What could be the solution? What causes this error? Help me Regards This file: /main/svx/inc/svx/xftsfit.hxx does not exist in the source tree. So that is why the target could not be built. Maybe a typo in the source file referencing it. I'm not sure where that is. -- MzK God, grant me the serenity to accept the things I cannot change, The courage to change the things I can, And wisdom to know the difference. -- The Serenity Prayer, adapted from Reinhold Niebuhr
error in svx/source/svdraw/svdmrkv
Hi all, I'm building the source code, but I have the following error: (I'am building on ubuntu) make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/zoomslideritem.hxx' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/svx.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/svxitems.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/svx/xoitems.sdi' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/lib/libsvx.so' has a high resolution time stamp make: *** Warning: .LOW_RESOLUTION_TIME file `/home/ivan/aoo/main/solver/400/unxlngi6.pro/lib/libsvxcore.so' has a high resolution time stamp [ build CXX ] svx/source/svdraw/svdmrkv R=/home/ivan/aoo S=$R/main O=$S/solver/400/unxlngi6.pro W=$O/workdir mkdir -p $W/CxxObject/svx/source/svdraw/ mkdir -p $W/Dep/CxxObject/svx/source/svdraw/ g++ -DCPPU_ENV=gcc3 -DCUI -DENABLE_GTK -DENABLE_LAYOUT=0 -DENABLE_LAYOUT_EXPERIMENTAL=0 -DGCC -DGXX_INCLUDE_PATH=/usr/include/c++/4.6 -DHAVE_GCC_VISIBILITY_FEATURE -DLINUX -DNDEBUG -DOPTIMIZE -DOSL_DEBUG_LEVEL=0 -DPRODUCT -DPRODUCT_FULL -DSOLAR_JAVA -DSTLPORT_VERSION=400 -DSUPD=400 -DUNIX -DUNX -DVCL -DX86 -D_PTHREADS -D_REENTRANT -DSVX_DLLIMPLEMENTATION -DBOOST_SPIRIT_USE_OLD_NAMESPACE -Wall -Wendif-labels -Wextra -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor -Wshadow -fPIC -fmessage-length=0 -fno-common -fno-strict-aliasing -fno-use-cxa-atexit -fvisibility-inlines-hidden -fvisibility=hidden -pipe -DEXCEPTIONS_ON -fexceptions -fno-enforce-eh-specs -Os -c $S/svx/source/svdraw/svdmrkv.cxx -o $W/CxxObject/svx/source/svdraw/svdmrkv.o -MMD -MT $W/CxxObject/svx/source/svdraw/svdmrkv.o -MF $W/Dep/CxxObject/svx/source/svdraw/svdmrkv.d -I$S/svx/source/svdraw/ -I$O/inc/stl -I$O/inc/stl -I$S/svx/inc -I$S/svx/inc/pch -I$S/svx/source/inc -I$O/inc/external -I$O/inc -I$S/solenv/unxlngi6/inc -I$S/solenv/inc -I$S/res -I$S/solenv/inc/Xp31 -I/usr/lib/jvm/java-6-openjdk-i386/include -I/usr/lib/jvm/java-6-openjdk-i386/include/linux -I/usr/lib/jvm/java-6-openjdk-i386/include/native_threads/include -I/usr/include -I$O/inc/offuh -I$W/SdiTarget/svx/sdi /home/ivan/aoo/main/svx/source/svdraw/svdmrkv.cxx: In member function 'virtual void SdrMarkView::SetMarkHandles()': /home/ivan/aoo/main/svx/source/svdraw/svdmrkv.cxx:788:69: error: 'const class GraphicObject' has no member named 'calculateCropScaling' make: *** [/home/ivan/aoo/main/solver/400/ unxlngi6.pro/workdir/CxxObject/svx/source/svdraw/svdmrkv.o] Error 1 dmake: Error code 2, while making 'all' 1 module(s): svx need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/svx/prj When you have fixed the errors in that module you can resume the build by running: build --all:svx ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/instsetoo_native$ Help. Regards.
ERROR: error 65280 occurred while making home/user/aoo/main/svx/prj
Hello, I have the following error when I build AOO: http://ooo.pastebin.ca/2377453 I'm building on Ubuntu. What could be the solution? What causes this error? Help me Regards
error module sal
Hello everyone, In the build: there is an error = Building module sal = Entering /home/ivan/aoo/main/sal/inc Entering /home/ivan/aoo/main/sal/typesconfig Entering /home/ivan/aoo/main/sal/textenc Making:all_textenc.dpslo Making:all_textenc.dpobj Entering /home/ivan/aoo/main/sal/osl/all Compiling: sal/osl/all/utility.cxx g++ -fmessage-length=0 -c -Os -fno-strict-aliasing -DENABLE_LAYOUT=0 -DENABLE_LAYOUT_EXPERIMENTAL=0 -D_FILE_OFFSET_BITS=64 -I. -I../../ unxlngi6.pro/inc/oslall -I../inc -I../../inc/pch -I../../inc -I../../unx/inc -I../../unxlngi6.pro/inc -I. -I/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/stl-I/home/ivan/aoo/main/solver/400/ unxlngi6.pro/inc/external -I/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc-I/home/ivan/aoo/main/solenv/unxlngi6/inc -I/home/ivan/aoo/main/solenv/inc -I/home/ivan/aoo/main/res -I/home/ivan/aoo/main/solver/400/ unxlngi6.pro/inc/stl -I/home/ivan/aoo/main/solenv/inc/Xp31 -I/usr/lib/jvm/java-6-openjdk-i386/include -I/usr/lib/jvm/java-6-openjdk-i386/include/linux -I/usr/lib/jvm/java-6-openjdk-i386/include/native_threads/include -I/usr/include -I/home/ivan/aoo/main/solver/400/unxlngi6.pro/inc/offuh -I. -I../../res -I. -pipe -mtune=pentiumpro -fvisibility-inlines-hidden -Wall -Wextra -Wendif-labels -Wshadow -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor-DLINUX -DUNX -DVCL -DGCC -DC341 -DINTEL -DGLIBC=2 -D_PTHREADS -D_REENTRANT -DNEW_SOLAR -D_USE_NAMESPACE=1 -DSTLPORT_VERSION=400 -DHAVE_GCC_VISIBILITY_FEATURE -DX86 -D__DMAKE -DUNIX -DCPPU_ENV=gcc3 -DGXX_INCLUDE_PATH=/usr/include/c++/4.6 -DSUPD=400 -DPRODUCT -DNDEBUG -DOSL_DEBUG_LEVEL=0 -DOPTIMIZE -DCUI -DSOLAR_JAVA -fexceptions -fno-enforce-eh-specs -DEXCEPTIONS_ON -o ../../ unxlngi6.pro/obj/utility.o /home/ivan/aoo/main/sal/osl/all/utility.cxx In file included from ../../inc/rtl/ustring.hxx:33:0, from /home/ivan/aoo/main/sal/osl/all/utility.cxx:28: ../../inc/rtl/string.hxx: In member function 'size_t rtl::CStringHash::operator()(const char*) const': ../../inc/rtl/string.hxx:950:53: error: invalid static_cast from type 'const char*' to type 'const unsigned char*' dmake: Error code 1, while making '../../unxlngi6.pro/obj/utility.obj' 1 module(s): sal need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/sal/osl/all When you have fixed the errors in that module you can resume the build by running: build --all:sal ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/instsetoo_native$ What would be the solution? I'm working on Ubuntu 12.04.1 LTS. Regards.
Re: svn commit: r1483216 - /openoffice/trunk/main/sal/inc/rtl/string.hxx
Hello Ariel, In my local directory: size_t operator()( const char* p) const { size_t n = 0; while( *p) n += 4*n + *static_castunsigned char*(p++); return n; I have already made the change, but the error persists. (pastebin, do not open the page) but here is the error: http://imagebin.org/257829 2013/5/16 Ariel Constenla-Haile arie...@apache.org On Thu, May 16, 2013 at 4:25 AM, h...@apache.org wrote: Author: hdu Date: Thu May 16 07:25:49 2013 New Revision: 1483216 URL: http://svn.apache.org/r1483216 Log: fix constness issue causing a build breaker Modified: openoffice/trunk/main/sal/inc/rtl/string.hxx Modified: openoffice/trunk/main/sal/inc/rtl/string.hxx URL: http://svn.apache.org/viewvc/openoffice/trunk/main/sal/inc/rtl/string.hxx?rev=1483216r1=1483215r2=1483216view=diff == --- openoffice/trunk/main/sal/inc/rtl/string.hxx (original) +++ openoffice/trunk/main/sal/inc/rtl/string.hxx Thu May 16 07:25:49 2013 @@ -947,7 +947,7 @@ struct CStringHash size_t operator()( const char* p) const { size_t n = 0; while( *p) - n += 4*n + *static_castunsigned char*(p++); + n += 4*n + *static_castconst unsigned char*(p++); This still breaks: ./../inc/rtl/string.hxx:950:53: error: invalid static_cast from type 'const char*' to type 'const unsigned char*' Regards - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: FormatArea Draw
Hello, http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/sd/uiconfig/sdraw/toolbar/drawingobjectbar.xml where is the code that converts these xml into toolbars? - --- http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/officecfg/registry/data/org/openoffice/Office/UI/GenericCommands.xcu#2504 node oor:name=.uno:FormatArea oor:op=replace prop oor:name=Label oor:type=xs:string value xml:lang=en-USArea.../value /prop prop oor:name=Properties oor:type=xs:int value1/value /prop /node where is the code that bound these value1/value into toolbars with an icon? Or what files work on this xml file and xcu file? Regards. 2013/4/14 Ariel Constenla-Haile arie...@apache.org On Sat, Apr 13, 2013 at 01:35:55PM -0500, jorge ivan poot diaz wrote: Hello Ariel, may be you can simply append a number when the name is already used, given Blue 9: Blue 10, then if Blue 11 is already used, increase it and try with Blue 12 and so on. Ok. I like this idea. How I can generate this number? I leave this for you, as homework; it is simply an algorithm, nothing specific to OO API nor C++, you could even find the algorithm using python. What I'm not sure is how generic this can be: will a RTL language use the Color N pattern, or N Color? And some locales may not use the Western-Arabic numerals used with the Latin script, wikipedia shows http://en.wikipedia.org/wiki/Eastern_Arabic_numerals and http://en.wikipedia.org/wiki/Indian_numerals Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: OUStringBuffer
Hello, I have a doubt, help I made this snippet String abuf = buf.charAt(nLen - 1); double ng = ::rtl::math::stringToDouble( abuf, '.', ',', NULL, NULL ); printf ( Is : %i , ng); But the return value is 0, in theory I want to return the last digit of the string String : world1695 Is : 0 String : world3184 Is : 0 ivan@ivan-Presario-CQ43-Notebook-PC:~$ The idea is that String : world3184 Is : 4 Any ideas why not return a numeric value? Regards 2013/5/6 Regina Henschel rb.hensc...@t-online.de Hi Jorge, jorge ivan poot diaz schrieb: thanks, buf.charAt (nLen - 1): this variable has a string as '1' or '2', '3'...'9' as it could change to int, any ideas, please help! I've done this: int ty = buf.charAt(nLen - 1); built well, but the result is not as expected. You should post what you get and what you expect. But perhaps the following hints might already solve your problem. Have a look at stringToDouble in main/sal/rtl/source/math.cxx to learn about converting to number. Or charAt returns a sal_Unicode. Searching the definition for sal_unicode you come to main/sal/inc/sal/types.h with leads you to wchar_t. So search in internet for wchar_t to int to get an idea what to do. Kind regards Regina --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: OUStringBuffer
thanks, buf.charAt (nLen - 1): this variable has a string as '1' or '2', '3'...'9' as it could change to int, any ideas, please help! I've done this: int ty = buf.charAt(nLen - 1); built well, but the result is not as expected. regards! 2013/4/29 Herbert Dürr h...@apache.org Hi Jorge, like Regina I have a hard time to understand the question. My best guess is that you have an OUStringBuffer object and need an UniString (aka tool's String [1]). If that is so you can get it using the UniString constructor that takes an OUString argument: UniString( buf.makeStringAndClear() ) [1] http://opengrok.adfinis-**sygroup.org/source/xref/aoo-** trunk/main/tools/inc/tools/**solar.h#269http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/tools/inc/tools/solar.h#269 Hope that helps, Herbert On 2013/04/25 8:00 PM, jorge ivan poot diaz wrote: I've already made a concatenation, in this file: http://opengrok.adfinis-**sygroup.org/source/xref/aoo-** trunk/main/cui/source/**tabpages/tpcolor.cxx#546http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#546 Something like this: OUStringBuffer buf( 128 ); buf.append( aName ); buf.append( 4 ); OUString string = buf.makeStringAndClear(); OString oString = rtl::OUStringToOString( string , RTL_TEXTENCODING_ASCII_US ); Substituting aName by oString in this fragment of code http://opengrok.adfinis-**sygroup.org/source/xref/aoo-** trunk/main/cui/source/**tabpages/tpcolor.cxx#549http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#549 , I have the following error, http://ooo.pastebin.ca/2366521 So, I want to convert this code to a STRING: OString oString = rtl::OUStringToOString( string , RTL_TEXTENCODING_ASCII_US ); Because the definition of aName is STRING, as you can see here: http://ooo.pastebin.ca/2366523 The file is located at: http://opengrok.adfinis-**sygroup.org/source/xref/aoo-** trunk/main/svx/inc/svx/xtable.**hxx#57http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/svx/inc/svx/xtable.hxx#57 --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: std::stringstream aStrStream
Hello all, http://www.openoffice.org/api/docs/cpp/ref/names/rtl/OString/o.htm OString* OString*( const OStringhttp://www.openoffice.org/api/docs/cpp/ref/names/rtl/c-OString.html str ) throw(); Summary: New string from OString. -- I found this fragment of code (above), it is interesting, I want to know if there is a function to STRING. 2013/4/20 Ariel Constenla-Haile arie...@apache.org On Fri, Apr 19, 2013 at 11:59:41AM -0500, jorge ivan poot diaz wrote: std::stringstream aS; [...] std::string s = aS.str(); [...] pEntry = new XColorEntry( aAktuellColor, s ); -- Would be like this pColorTab-Insert( pColorTab-Count(), pEntry ); aLbColor.Append( pEntry ); aValSetColorTable.InsertItem( aValSetColorTable.GetItemCount() + 1, pEntry-GetColor(), pEntry-GetName() ); aLbColor.SelectEntryPos( aLbColor.GetEntryCount() - 1 ); But this does not work, in building generates error: http://imagebin.org/254616 (it would be more useful to put the error in a pastebin, not an imagebin) The error message is rather clear: there is no matching function call to the any of the constructors of XColorEntry, none takes a std::string. http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/svx/inc/svx/xtable.hxx#57 The constructor that is used in this code is XColorEntry(const Color rColor, const String rName) it takes a tools' string http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/tools/inc/tools/string.hxx On the other head, why are you using std::stringstream/string? In the core code you should not use standard C++ string classes, but rtl::OUString, OUStringBuffer, etc.; even if you are playing with the code, before diving into the source, you should get familiar with them - in general, with the whole C++ UNO language binding: http://wiki.openoffice.org/wiki/Documentation/DevGuide/ProUNO/C%2B%2B/C%2B%2B_Language_Binding http://www.openoffice.org/api/docs/cpp/ref/ http://www.openoffice.org/api/docs/cpp/ref/names/rtl/c-OUString.html http://www.openoffice.org/api/docs/cpp/ref/names/rtl/c-OString.html http://www.openoffice.org/api/docs/cpp/ref/names/rtl/c-OUStringBuffer.html http://www.openoffice.org/api/docs/cpp/ref/names/rtl/c-OStringBuffer.html Set-up the SDK and play with the string sample in http://svn.apache.org/viewvc/openoffice/trunk/main/odk/examples/DevelopersGuide/ProfUNO/CppBinding/ Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: OUStringBuffer
I've already made a concatenation, in this file: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#546 Something like this: OUStringBuffer buf( 128 ); buf.append( aName ); buf.append( 4 ); OUString string = buf.makeStringAndClear(); OString oString = rtl::OUStringToOString( string , RTL_TEXTENCODING_ASCII_US ); Substituting aName by oString in this fragment of code http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#549, I have the following error, http://ooo.pastebin.ca/2366521 So, I want to convert this code to a STRING: OString oString = rtl::OUStringToOString( string , RTL_TEXTENCODING_ASCII_US ); Because the definition of aName is STRING, as you can see here: http://ooo.pastebin.ca/2366523 The file is located at: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/svx/inc/svx/xtable.hxx#57 Regards. 2013/4/25 Regina Henschel rb.hensc...@t-online.de Hi, jorge ivan poot diaz schrieb: I have doubts about using class OUStringBuffer You should be more specific about your problem. Do you need help in understanding the descriptions in ustrbuf.hxx? Or do you get an compiler error, which do you not understand? Or do you need help about the difference to other string types? Or ...? I want to implement this code: x = new OUStringBuffer().append(a).**append(4).append(c).** toString(); (one example) This snippet, missing something? (A declaration of variables?) Please post a little bit more. Where do you want to use that code? What is x ? Do you want to do something specific, or is it an exercise, some kind of hello world? Kind regards Regina --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: std::stringstream aStrStream
I implemented the code, thanks. At the beginning of the class I put this code: Original Code String aName( aEdtName.GetText() ); I've replaced with ::rtl::OUString aName2( aEdtName.GetText() ); The concatenation. This is fine std::stringstream aS; aS This ::rtl::OUStringToOString(aName2, RTL_TEXTENCODING_ASCII_US).getStr() std::endl; I convert from stringstream to string std::string s = aS.str(); _STL::cout s; Now I want to replace aName with s, in the following code fragment: if (eCM != CM_RGB) ConvertColorValues (aAktuellColor, CM_RGB); pEntry = new XColorEntry( aAktuellColor, aName ); -- Original code pEntry = new XColorEntry( aAktuellColor, s ); -- Would be like this pColorTab-Insert( pColorTab-Count(), pEntry ); aLbColor.Append( pEntry ); aValSetColorTable.InsertItem( aValSetColorTable.GetItemCount() + 1, pEntry-GetColor(), pEntry-GetName() ); aLbColor.SelectEntryPos( aLbColor.GetEntryCount() - 1 ); But this does not work, in building generates error: http://imagebin.org/254616 It could be the type of variable? How is the conversion from stringstream to string, is ok? 2013/4/18 Andre Fischer awf@gmail.com On 18.04.2013 04:51, jorge ivan poot diaz wrote: Hello, Thanks you, I have already changed the string as you said me. This is the result: ::rtl::OUString aName ( aEdtName.GetText() ); And then I put this code std::stringstream aStrStream; aStrStream \nThis is aName and aName genial! std::endl; _STL::cout aStrStream.str(); The building was successful, but does not print whole aStrStream. Only this part: This is http://imagebin.org/254440 OUString is a UTF-16 string. That means that when it is created from an ASCII string then every second byte is '\0'. That means that aStrStream \nThis is aName ... is basically equivalent to aStrStream \nThis is '\0' ... Therfore everything after \nThis is is cut off. To fix this you have to replace aName with ::rtl::OUStringToOString(**aName, RTL_TEXTENCODING_ASCII_US).**getStr() You may want to use a small method to make this more readable: namespace { sal_Char* o2a (const ::rtl::OUString rsText) { return ::rtl::OUStringToOString(**rsText, RTL_TEXTENCODING_ASCII_US).**getStr(); } } and then aStrStream \nThis is o2a(aName) ... [I did not compile this, there may be typos in this] --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: std::stringstream aStrStream
I don't see a definition of aName, but from the error message assume that it is String. http://imagebin.org/254354 That is because the String class has no operator defined. Try to use aName.getStr() instead of just aName. http://imagebin.org/254355 As you can see from the picture, I already made the change, but I have the following error: http://imagebin.org/254357 I try with aEdtName.GetText () instead of aName.getStr() but yet does not compile: http://imagebin.org/254361 Help, ragards. 2013/4/17 Andre Fischer awf@gmail.com On 17.04.2013 01:46, jorge ivan poot diaz wrote: Hello, I am modifying this code in AOO: http://opengrok.adfinis-**sygroup.org/source/xref/aoo-** trunk/main/cui/source/**tabpages/tpcolor.cxx#465http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I'm trying to concatenate with stringstream but I have errors when I'am building: 1- I already included: #include sstream 2- I have added the following code: http://imagebin.org/254288 I don't see a definition of aName, but from the error message assume that it is String. 3- This is the error: http://imagebin.org/254289 That is because the String class has no operator defined. Try to use aName.getStr() instead of just aName. -Andre Help me, regards!! --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: std::stringstream aStrStream
Hello, Thanks you, I have already changed the string as you said me. This is the result: ::rtl::OUString aName ( aEdtName.GetText() ); And then I put this code std::stringstream aStrStream; aStrStream \nThis is aName and aName genial! std::endl; _STL::cout aStrStream.str(); The building was successful, but does not print whole aStrStream. Only this part: This is http://imagebin.org/254440 What causes this? Could be some error in the code or in the concatenation? 2013/4/17 Andre Fischer awf@gmail.com On 17.04.2013 17:09, jorge ivan poot diaz wrote: I don't see a definition of aName, but from the error message assume that it is String. http://imagebin.org/254354 That is because the String class has no operator defined. Try to use aName.getStr() instead of just aName. http://imagebin.org/254355 As you can see from the picture, I already made the change, but I have the following error: http://imagebin.org/254357 I try with aEdtName.GetText () instead of aName.getStr() but yet does not compile: http://imagebin.org/254361 Help, ragards. Sorry, I do not use String anymore and had to guess and apparently guessed wrong. If you can, you probably should use ::rtl::OUString instead of String. The conversion to char* looks like this: ::rtl::OUString sText (::rtl::OUString::**createFromAscii(some text)); ::std::cout ::rtl::OUStringToOString(**sText, RTL_TEXTENCODING_ASCII_US).**getStr() ::std::endl; or something very similar to this. If you still want to use String then cosv/inc/cosv/string.hxx suggests to use c_str() to obtain a char*. -Andre 2013/4/17 Andre Fischer awf@gmail.com On 17.04.2013 01:46, jorge ivan poot diaz wrote: Hello, I am modifying this code in AOO: http://opengrok.adfinis-**sygr**oup.org/source/xref/aoo-**http://sygroup.org/source/xref/aoo-** trunk/main/cui/source/tabpages/tpcolor.cxx#465http:** //opengrok.adfinis-sygroup.**org/source/xref/aoo-trunk/** main/cui/source/tabpages/**tpcolor.cxx#465http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I'm trying to concatenate with stringstream but I have errors when I'am building: 1- I already included: #include sstream 2- I have added the following code: http://imagebin.org/254288 I don't see a definition of aName, but from the error message assume that it is String. 3- This is the error: http://imagebin.org/254289 That is because the String class has no operator defined. Try to use aName.getStr() instead of just aName. -Andre Help me, regards!! --** --**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**a**pache.orghttp://apache.org dev-unsubscribe@**openoffice.apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org --**--**- To unsubscribe, e-mail: dev-unsubscribe@openoffice.**apache.orgdev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
std::stringstream aStrStream
Hello, I am modifying this code in AOO: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I'm trying to concatenate with stringstream but I have errors when I'am building: 1- I already included: #include sstream 2- I have added the following code: http://imagebin.org/254288 3- This is the error: http://imagebin.org/254289 Help me, regards!!
Re: Random Numbers
Ok. Thanks. 2013/4/11 Ariel Constenla-Haile arie...@apache.org Hi Jorge, On Thu, Apr 11, 2013 at 07:16:02PM -0500, jorge ivan poot diaz wrote: Hello, I have this code, I try to generate random numbers, but I have problems when I build: protected double getRandomDouble() { return (maRandom.nextInt(1000) * maRandom.nextDouble()); } Looks like you copied pasted from http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/odk/examples/DevelopersGuide/Text/TextDocuments.java#690 maRandom is a member variable in that Java class, of type java.util.Random. No way this will ever work in cui/source/tabpages/tpcolor.cxx What could be the error in this code? Java != C++ Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: tpcolor - aName
Do you want to see the value of this variable inside the debugger (gdb)? Yes . How I can do this? 2013/4/11 Ariel Constenla-Haile arie...@apache.org Hi Jorge, On Wed, Apr 10, 2013 at 09:12:18PM -0500, jorge ivan poot diaz wrote: Hello, I am modifying this code into the source code AOO http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I want to know how I can see the value of variables or just know that you value. Do you want to see the value of this variable inside the debugger (gdb)? Regards -- Ariel Constenla-Haile La Plata, Argentina
Random Numbers
Hello, I have this code, I try to generate random numbers, but I have problems when I build: protected double getRandomDouble() { return (maRandom.nextInt(1000) * maRandom.nextDouble()); } Here is the error: /home/ivan/aoo/main/cui/source/tabpages/tpcolor.cxx: In member function 'long int SvxColorTabPage::ClickAddHdl_Impl(void*)': /home/ivan/aoo/main/cui/source/tabpages/tpcolor.cxx:547:2: error: expected primary-expression before 'protected' /home/ivan/aoo/main/cui/source/tabpages/tpcolor.cxx:547:2: error: expected ';' before 'protected' dmake: Error code 1, while making '../../unxlngi6.pro/slo/tpcolor.obj' ERROR: error 65280 occurred while making /home/ivan/aoo/main/cui/source/tabpages This snippet, I want to implement it in tpcolor.cxx http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 What could be the error in this code? Helpme! Regards.
tpcolor - aName
Hello, I am modifying this code into the source code AOO http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I want to know how I can see the value of variables or just know that you value. For example this code fragment: ConvertColorValues (aAktuellColor, CM_RGB); pEntry = new XColorEntry( aAktuellColor, aName ); aName = ?? I think this is the name of the color that is added, I'm not sure. Help me. Regards.
tpcolor.cxx
Hello I've made changes to the module cui (tpcolor.cxx): http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I want to know which modules should I build or explain me what modules are built by editing the file tpcolor.cxx and why? Regards.
Error 1 module(s): odk
Hello, I'm building in AOO source code, but I have a error in the module odk: Here the error: Entering /home/ivan/aoo/main/odk/util dmake: Error: -- `../examples/cpp/StatusbarController/WordCountStatusbarController/WordCountDispatch.hxx' not found, and can't be made 1 module(s): odk need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/odk/util When you have fixed the errors in that module you can resume the build by running: build --all:odk ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/instsetoo_native$ I'm building on Ubuntu 12.04 Help me, regards.
Re: Error 1 module(s): odk
Here is a picture: http://imagebin.org/252637 2013/4/3 jorge ivan poot diaz ivan.pootd...@gmail.com Hello, I'm building in AOO source code, but I have a error in the module odk: Here the error: Entering /home/ivan/aoo/main/odk/util dmake: Error: -- `../examples/cpp/StatusbarController/WordCountStatusbarController/WordCountDispatch.hxx' not found, and can't be made 1 module(s): odk need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/odk/util When you have fixed the errors in that module you can resume the build by running: build --all:odk ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/instsetoo_native$ I'm building on Ubuntu 12.04 Help me, regards.
Re: FormatArea Draw
Hello Ariel, This I am doing as a project that I have been assigned by Alexandro Colorado. -- In the source code AOO Earlier you gave me the code that is responsible for registering the colors: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I know generate files Soc http://imagebin.org/252235 So now this is the situation This is the directory of files .Soc http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/extras/source/palettes/ Can you tell me where is the code that acts on these files .soc, other words where is the code that generates or sends the new color to these files soc. Regards. 2013/3/19 Ariel Constenla-Haile arie...@apache.org On Tue, Mar 19, 2013 at 07:56:34PM -0600, jorge ivan poot diaz wrote: hello, I understand that: 155aBtnAdd.SetClickHdl( LINK( this, SvxColorTabPage, ClickAddHdl_Impl ) ); Generates the window to register a new color: 465 IMPL_LINK( SvxColorTabPage, ClickAddHdl_Impl, void *, EMPTYARG ) I want to make: that the new color added -- The user does not enter the color name, the system automatically do this Well, you could generate a random unique name, simply change the logic in the code, and do not prompt the user when the name is missing or the name is already in use. By the way, are you doing this just to get used to the code? I doubt this will make it into the source code without discussing the user experience implications. Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: FormatArea Draw
Sorry, you are right. I mistyped, English is not my native language. I found the idea on the ideastorm and found it interesting to try it. 2013/3/30 Alexandro Colorado j...@oooes.org On Sat, Mar 30, 2013 at 1:38 PM, jorge ivan poot diaz ivan.pootd...@gmail.com wrote: Hello Ariel, This I am doing as a project that I have been assigned by Alexandro Colorado. Just to clarify, I didn't 'assigned you a project', but told you a good task you could find to learn the way OpenOffice source code works. Having an easy way to select colors from a spectrum rather than a palette (automating the registration of the color) could improve user experience greatly. -- In the source code AOO Earlier you gave me the code that is responsible for registering the colors: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I know generate files Soc http://imagebin.org/252235 So now this is the situation This is the directory of files .Soc http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/extras/source/palettes/ Can you tell me where is the code that acts on these files .soc, other words where is the code that generates or sends the new color to these files soc. Regards. 2013/3/19 Ariel Constenla-Haile arie...@apache.org On Tue, Mar 19, 2013 at 07:56:34PM -0600, jorge ivan poot diaz wrote: hello, I understand that: 155aBtnAdd.SetClickHdl( LINK( this, SvxColorTabPage, ClickAddHdl_Impl ) ); Generates the window to register a new color: 465 IMPL_LINK( SvxColorTabPage, ClickAddHdl_Impl, void *, EMPTYARG ) I want to make: that the new color added -- The user does not enter the color name, the system automatically do this Well, you could generate a random unique name, simply change the logic in the code, and do not prompt the user when the name is missing or the name is already in use. By the way, are you doing this just to get used to the code? I doubt this will make it into the source code without discussing the user experience implications. Regards -- Ariel Constenla-Haile La Plata, Argentina -- Alexandro Colorado Apache OpenOffice Contributor http://es.openoffice.org
Re: FormatArea Draw
I want to learn how to relate the dialog code to the programing logic. As I can find the other functionalities. 2013/3/30 jorge ivan poot diaz ivan.pootd...@gmail.com Sorry, you are right. I mistyped, English is not my native language. I found the idea on the ideastorm and found it interesting to try it. 2013/3/30 Alexandro Colorado j...@oooes.org On Sat, Mar 30, 2013 at 1:38 PM, jorge ivan poot diaz ivan.pootd...@gmail.com wrote: Hello Ariel, This I am doing as a project that I have been assigned by Alexandro Colorado. Just to clarify, I didn't 'assigned you a project', but told you a good task you could find to learn the way OpenOffice source code works. Having an easy way to select colors from a spectrum rather than a palette (automating the registration of the color) could improve user experience greatly. -- In the source code AOO Earlier you gave me the code that is responsible for registering the colors: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx#465 I know generate files Soc http://imagebin.org/252235 So now this is the situation This is the directory of files .Soc http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/extras/source/palettes/ Can you tell me where is the code that acts on these files .soc, other words where is the code that generates or sends the new color to these files soc. Regards. 2013/3/19 Ariel Constenla-Haile arie...@apache.org On Tue, Mar 19, 2013 at 07:56:34PM -0600, jorge ivan poot diaz wrote: hello, I understand that: 155aBtnAdd.SetClickHdl( LINK( this, SvxColorTabPage, ClickAddHdl_Impl ) ); Generates the window to register a new color: 465 IMPL_LINK( SvxColorTabPage, ClickAddHdl_Impl, void *, EMPTYARG ) I want to make: that the new color added -- The user does not enter the color name, the system automatically do this Well, you could generate a random unique name, simply change the logic in the code, and do not prompt the user when the name is missing or the name is already in use. By the way, are you doing this just to get used to the code? I doubt this will make it into the source code without discussing the user experience implications. Regards -- Ariel Constenla-Haile La Plata, Argentina -- Alexandro Colorado Apache OpenOffice Contributor http://es.openoffice.org
Update source code
Hello I want to update the source code. I'm working on ubuntu: Distributor ID:Ubuntu Description:Ubuntu 12.04.1 LTS Release:12.04 Codename:precise How I can do this? Help me. Regards
Re: FormatArea Draw
What happened with this? Did you tried it? no. If you want to locate the source code for a dialog/tab page/control, you can export HELP_DEBUG=1 and enable extended tooltips in the Tools Options dialog. How I can do this? You could explain me step by step please. 2013/3/14 Ariel Constenla-Haile arie...@apache.org On Thu, Mar 14, 2013 at 09:08:33PM -0600, jorge ivan poot diaz wrote: Hello again, I have doubts about the Color dialog box: Attached the link below of the color dialog http://imagebin.org/250306 This seems the Area dialogs, it is made up of several tab pages. If you want to locate the source code for a dialog/tab page/control, you can export HELP_DEBUG=1 and enable extended tooltips in the Tools Options dialog. This way, when you rest the mouse on a control, you'll see the help id: http://people.apache.org/~arielch/images/HelpID_cui.png The help ID of this control in the screen shot, cui:Edit:RID_SVXPAGE_COLOR:EDT_NAME, will help you find the src file: http://opengrok.adfinis-sygroup.org/source/search?q=%22cui%3AEdit%3ARID_SVXPAGE_COLOR%3AEDT_NAME%22defs=refs=path=srchist=project=aoo-trunk Searching for the helpid of the whole tabe page, RID_SVXPAGE_COLOR you can find the src file, and the C++ code, if you narrow the search to the cui module: http://opengrok.adfinis-sygroup.org/source/search?q=RID_SVXPAGE_COLORdefs=refs=path=cuihist=project=aoo-trunk So you see taht this Color tab page is implemented in the SvxColorTabPage class http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tpcolor.cxx I'm in the code window, so far I have this link: http://svn.services.openoffice.org/opengrok/xref/Current%20%28trunk%29/svtools/inc/svtools/colrdlg.hxx http://svn.services.openoffice.org/opengrok/xref/Current%20%28trunk%29/svtools/source/dialogs/colrdlg.cxx Don't use http://svn.services.openoffice.org/opengrok, is outdated. And this seems the code from the old color picker, not for the Color tab page. To register the colors, What services are used? Debug the code in tpcolor.cxx, and pay attention to the part where you find the XColorTable. If you want to see the creation of the other UI elements (menubar, statusbar), break in framework::LayoutManager::createElement What happened with this? Did you tried it? Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: FormatArea Draw
I already found the dialogue box code: http://imagebin.org/250778 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src 46 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#46 Edit http://opengrok.adfinis-sygroup.org/source/s?defs=Editproject=aoo-trunk EDT_STRING http://opengrok.adfinis-sygroup.org/source/s?defs=EDT_STRINGproject=aoo-trunk47 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#47 {48 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#48 HelpID http://opengrok.adfinis-sygroup.org/source/s?defs=HelpIDproject=aoo-trunk = cui:Edit:RID_SVXDLG_NAME:EDT_STRING;49 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#49 Border http://opengrok.adfinis-sygroup.org/source/s?defs=Borderproject=aoo-trunk = TRUE http://opengrok.adfinis-sygroup.org/source/s?defs=TRUEproject=aoo-trunk ;50 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#50 Pos http://opengrok.adfinis-sygroup.org/source/s?defs=Posproject=aoo-trunk = MAP_APPFONT http://opengrok.adfinis-sygroup.org/source/s?defs=MAP_APPFONTproject=aoo-trunk ( 6 , 17 ) ;51 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#51 Size http://opengrok.adfinis-sygroup.org/source/s?defs=Sizeproject=aoo-trunk = MAP_APPFONT http://opengrok.adfinis-sygroup.org/source/s?defs=MAP_APPFONTproject=aoo-trunk ( 112 , 12 ) ;52 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#52 TabStop http://opengrok.adfinis-sygroup.org/source/s?defs=TabStopproject=aoo-trunk = TRUE http://opengrok.adfinis-sygroup.org/source/s?defs=TRUEproject=aoo-trunk ;53 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#53 };54 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/dialogs/dlgname.src#54 OKButton http://opengrok.adfinis-sygroup.org/source/s?defs=OKButtonproject=aoo-trunk BTN_OK http://opengrok.adfinis-sygroup.org/source/s?defs=BTN_OKproject=aoo-trunk where's the code that registers the new color? 2013/3/18 jorge ivan poot diaz ivan.pootd...@gmail.com Hello, in http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src 1420 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1420 PushButton http://opengrok.adfinis-sygroup.org/source/s?defs=PushButtonproject=aoo-trunk BTN_ADD http://opengrok.adfinis-sygroup.org/source/s?defs=BTN_ADDproject=aoo-trunk1421 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1421 {1422 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1422 HelpID http://opengrok.adfinis-sygroup.org/source/s?defs=HelpIDproject=aoo-trunk = cui:PushButton:RID_SVXPAGE_COLOR:BTN_ADD;1423 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1423 Pos http://opengrok.adfinis-sygroup.org/source/s?defs=Posproject=aoo-trunk = MAP_APPFONT http://opengrok.adfinis-sygroup.org/source/s?defs=MAP_APPFONTproject=aoo-trunk ( 197 , 14 ) ;1424 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1424 Size http://opengrok.adfinis-sygroup.org/source/s?defs=Sizeproject=aoo-trunk = MAP_APPFONT http://opengrok.adfinis-sygroup.org/source/s?defs=MAP_APPFONTproject=aoo-trunk ( 50 , 14 ) ;1425 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1425 Text http://opengrok.adfinis-sygroup.org/source/s?defs=Textproject=aoo-trunk [ en http://opengrok.adfinis-sygroup.org/source/s?defs=enproject=aoo-trunk-US http://opengrok.adfinis-sygroup.org/source/s?defs=USproject=aoo-trunk ] = ~Add ;1426 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1426 TabStop http://opengrok.adfinis-sygroup.org/source/s?defs=TabStopproject=aoo-trunk = TRUE http://opengrok.adfinis-sygroup.org/source/s?defs=TRUEproject=aoo-trunk ;1427 http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/cui/source/tabpages/tabarea.src#1427 }; The button to add colors, now I want to know where is the code that registers the colors. 2013/3/18 Ariel Constenla-Haile arie...@apache.org On Mon, Mar 18, 2013 at 10:54:39AM -0600, jorge ivan poot diaz wrote: If you want to locate the source code for a dialog/tab page/control, you can export HELP_DEBUG=1 and enable extended tooltips in the Tools Options dialog. How I can do this? You could explain me step by step please. You have to export
Re: FormatArea Draw
Hello, I have doubts about the Format dialog box: - Colors Where is the code of this dialog box in the source code? [image: Imagen integrada 1] Regards. 2013/3/11 Ariel Constenla-Haile arie...@apache.org Hi Ivan, On Mon, Mar 11, 2013 at 09:49:51PM -0600, jorge ivan poot diaz wrote: Hello, I'm seeing the files in the source code in draw, examples: https://svn.apache.org/repos/asf/openoffice/trunk/main/sd/uiconfig/sdraw/toolbar/drawingobjectbar.xml I want to know where the source code files are declared Icons Standard Toolbar and Formatting. Do you want to know which of these xml files belongs to the Standard toolbar, which to the Text Formatting toolbar, etc.? Or where is the code that converts these xml into toolbars? I want to know how I can add another icon in the toolbar. If you look at the file, you notice that the concept of an icon does not exist there; all you have is what is called a UNO command, for example .uno:FormatLine The UNO command is the central point; from the UNO command the application framework retrieves the label/text of the toolbar item, and the icon bound to it. The command to label binding is done in the XxxCommands.xcu that you already know, with the Label/ContextLabel proeprty; if the Property property has a value of 1, it indicates that the command is bound to an icon. Icons bound to UNO commands are located at https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/ the naming scheme is the following: * prefix: sc_ 16x16 image sch_16x16 high-contrast image lc_ 26x26 image lch_26x26 h-c image * the UNO command without the protocol part (.uno:), in lowercase. For examle, for .uno:FormatLine: https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/sc_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/sch_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/lc_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/lch_formatline.png In short, you don't add an icon to the toolbar; you add a UNO command. If this UNO command is new (it does not exist in the current source code), you'll have to implement the functionality that executes the command (you click the toolbar item, the UNO command is dispatched, that is, the functionality bound to it is executed), and also gives information about the status of the functionality this command represents (toolbar items are context sensitive, they are enabled or disabled, etc., depending on the state of the feature they represent). Similarly, I've noticed that there are several xml files at this address: https://svn.apache.org/repos/asf/openoffice/trunk/main/sd/uiconfig/sdraw/toolbar/ Yes, because there are several toolbars in Draw. What are the interface need to draw the toolbar? There is a lot of code involved in transforming this xml file into a toolbar, spread in several modules. The central part is the application framework, drawing the toolbar onto the screen happens in vcl. If you want to dive into this, the best -IMO - is setting a break point in the framework code: framework::ToolbarLayoutManager::implts_createElement Note that it's better to start the application from withing the debugger, because UI elements are cached, you won't see it's creation from zero (reading that xml file) if you attach to an already opened document. If you want to see the creation of the other UI elements (menubar, statusbar), break in framework::LayoutManager::createElement Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: FormatArea Draw
Hello again, I have doubts about the Color dialog box: Attached the link below of the color dialog http://imagebin.org/250306 I'm in the code window, so far I have this link: http://svn.services.openoffice.org/opengrok/xref/Current%20%28trunk%29/svtools/inc/svtools/colrdlg.hxxhttp://imagebin.org/250306 http://svn.services.openoffice.org/opengrok/xref/Current%20%28trunk%29/svtools/source/dialogs/colrdlg.cxx http://imagebin.org/250306 To register the colors, What services are used? Regards. 2013/3/14 jorge ivan poot diaz ivan.pootd...@gmail.com Hello, I have doubts about the Format dialog box: - Colors Where is the code of this dialog box in the source code? [image: Imagen integrada 1] Regards. 2013/3/11 Ariel Constenla-Haile arie...@apache.org Hi Ivan, On Mon, Mar 11, 2013 at 09:49:51PM -0600, jorge ivan poot diaz wrote: Hello, I'm seeing the files in the source code in draw, examples: https://svn.apache.org/repos/asf/openoffice/trunk/main/sd/uiconfig/sdraw/toolbar/drawingobjectbar.xml I want to know where the source code files are declared Icons Standard Toolbar and Formatting. Do you want to know which of these xml files belongs to the Standard toolbar, which to the Text Formatting toolbar, etc.? Or where is the code that converts these xml into toolbars? I want to know how I can add another icon in the toolbar. If you look at the file, you notice that the concept of an icon does not exist there; all you have is what is called a UNO command, for example .uno:FormatLine The UNO command is the central point; from the UNO command the application framework retrieves the label/text of the toolbar item, and the icon bound to it. The command to label binding is done in the XxxCommands.xcu that you already know, with the Label/ContextLabel proeprty; if the Property property has a value of 1, it indicates that the command is bound to an icon. Icons bound to UNO commands are located at https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/ the naming scheme is the following: * prefix: sc_ 16x16 image sch_16x16 high-contrast image lc_ 26x26 image lch_26x26 h-c image * the UNO command without the protocol part (.uno:), in lowercase. For examle, for .uno:FormatLine: https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/sc_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/sch_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/lc_formatline.png https://svn.apache.org/repos/asf/openoffice/trunk/main/default_images/res/commandimagelist/lch_formatline.png In short, you don't add an icon to the toolbar; you add a UNO command. If this UNO command is new (it does not exist in the current source code), you'll have to implement the functionality that executes the command (you click the toolbar item, the UNO command is dispatched, that is, the functionality bound to it is executed), and also gives information about the status of the functionality this command represents (toolbar items are context sensitive, they are enabled or disabled, etc., depending on the state of the feature they represent). Similarly, I've noticed that there are several xml files at this address: https://svn.apache.org/repos/asf/openoffice/trunk/main/sd/uiconfig/sdraw/toolbar/ Yes, because there are several toolbars in Draw. What are the interface need to draw the toolbar? There is a lot of code involved in transforming this xml file into a toolbar, spread in several modules. The central part is the application framework, drawing the toolbar onto the screen happens in vcl. If you want to dive into this, the best -IMO - is setting a break point in the framework code: framework::ToolbarLayoutManager::implts_createElement Note that it's better to start the application from withing the debugger, because UI elements are cached, you won't see it's creation from zero (reading that xml file) if you attach to an already opened document. If you want to see the creation of the other UI elements (menubar, statusbar), break in framework::LayoutManager::createElement Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: TOOLS DRAW
Hello, I already modify the source code: ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/sd/uiconfig/sdraw/menubar$ gedit menubar.xml /menu:menu menu:menu menu:id=.uno:PruebasMenu (- ToolsMenu -) menu:menupopup menu:menuitem menu:id=.uno:SpellDialog/ menu:menu menu:id=.uno:LanguageMenu menu:menupopup menu:menuitem menu:id=.uno:HangulHanjaConversion/ menu:menuitem menu:id=.uno:ChineseConversion/ menu:menuitem menu:id=.uno:ThesaurusDialog/ menu:menuitem menu:id=.uno:Hyphenation/ menu:menuseparator/ menu:menuitem menu:id=.uno:MoreDictionaries/ /menu:menupopup /menu:menu When I did the build in officecfg and postprocess: ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ build debug=true dbglevel=3 ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ deliver deliver -- version: 275594 COPY: ../unxlngi6.pro/bin/uiconfig.zip - /home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/uiconfig.zip COPY: ../unxlngi6.pro/misc/lang/registry_en-US.xcd - /home/ivan/aoo/main/solver/350/unxlngi6.pro/xml//registry_en-US.xcd LOG: writing /home/ivan/aoo/main/solver/350/ unxlngi6.pro/inc/postprocess/deliver.log Module 'postprocess' delivered successfully. 2 files copied, 27 files unchanged ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ I can not see what files I should copy in my installation folder. I already try with export VERBOSE=TRUE But I have not the results. To start when I do the build I have not notice of officecfg and postprocess if are building Help me. 2013/2/28 Ariel Constenla-Haile arie...@apache.org Hi Ivan, On Thu, Feb 28, 2013 at 12:03:43AM -0600, jorge ivan poot diaz wrote: Hello, ivan@ivan-Presario-CQ43-Notebook-PC :~/aoo/main/officecfg/registry/data/org/openoffice/Office/UI$ ls I can not find: ModuleCommands.xcu Module is a placeholder, sorry for not been more explicit: [ariel@localhost main]$ ls ./officecfg/registry/data/org/openoffice/Office/UI/*Commands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/BasicIDECommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/DrawImpressCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/BibliographyCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/GenericCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/CalcCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/MathCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/ChartCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/StartModuleCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/DbuCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/WriterCommands.xcu where Module is one the modules in AOO. sw - WriterCommands.xcu sd - DrawImpress.xcu sc - CalcCommands.xcu I have already been modifying: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/sd/uiconfig/sdraw/menubar/menubar.xml If changing this, do not modify the UNO command, only the menu structure. Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: TOOLS DRAW
Hello, I have made the following changes to the source code: ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/sd/uiconfig/sdraw/menubar$ gedit menubar.xml menu:menu menu:id=.uno:PruebaMenu menu:menupopup menu:menuitem menu:id=.uno:SetDefault/ menu:menuseparator/ menu:menuitem menu:id=.uno:FontDialog/ menu:menuitem menu:id=.uno:ParagraphDialog/ menu:menuitem menu:id=.uno:OutlineBullet/ menu:menuitem menu:id=.uno:PageSetup/ menu:menuseparator/ menu:menu menu:id=.uno:TransliterateMenu menu:menupopup ivan@ivan-Presario-CQ43-Notebook-PC :~/aoo/main/officecfg/registry/data/org/openoffice/Office/UI$ node oor:name=.uno:PruebaMenu oor:op=replace prop oor:name=Label oor:type=xs:string value xml:lang=en-USF~ormat/value /prop /node The result of the build and deliver (They are in the following links): http://imagebin.org/249355 http://imagebin.org/249356 I have already copied the main.xcd in my installation directory, but I have the following error in the soffice interface: [image: Imagen integrada 1] Menu does not appear that I have changed. In this case the Format menu. I want to appear instead of Format, Prueba. Help me, I want to learn how it works source code of office. A patch for this change. Please. Regards. 2013/3/7 jorge ivan poot diaz ivan.pootd...@gmail.com Hello, I already modify the source code: ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/sd/uiconfig/sdraw/menubar$ gedit menubar.xml /menu:menu menu:menu menu:id=.uno:PruebasMenu (- ToolsMenu -) menu:menupopup menu:menuitem menu:id=.uno:SpellDialog/ menu:menu menu:id=.uno:LanguageMenu menu:menupopup menu:menuitem menu:id=.uno:HangulHanjaConversion/ menu:menuitem menu:id=.uno:ChineseConversion/ menu:menuitem menu:id=.uno:ThesaurusDialog/ menu:menuitem menu:id=.uno:Hyphenation/ menu:menuseparator/ menu:menuitem menu:id=.uno:MoreDictionaries/ /menu:menupopup /menu:menu When I did the build in officecfg and postprocess: ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ build debug=true dbglevel=3 ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ deliver deliver -- version: 275594 COPY: ../unxlngi6.pro/bin/uiconfig.zip - /home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/uiconfig.zip COPY: ../unxlngi6.pro/misc/lang/registry_en-US.xcd - /home/ivan/aoo/main/solver/350/unxlngi6.pro/xml//registry_en-US.xcd LOG: writing /home/ivan/aoo/main/solver/350/ unxlngi6.pro/inc/postprocess/deliver.log Module 'postprocess' delivered successfully. 2 files copied, 27 files unchanged ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/postprocess$ I can not see what files I should copy in my installation folder. I already try with export VERBOSE=TRUE But I have not the results. To start when I do the build I have not notice of officecfg and postprocess if are building Help me. 2013/2/28 Ariel Constenla-Haile arie...@apache.org Hi Ivan, On Thu, Feb 28, 2013 at 12:03:43AM -0600, jorge ivan poot diaz wrote: Hello, ivan@ivan-Presario-CQ43-Notebook-PC :~/aoo/main/officecfg/registry/data/org/openoffice/Office/UI$ ls I can not find: ModuleCommands.xcu Module is a placeholder, sorry for not been more explicit: [ariel@localhost main]$ ls ./officecfg/registry/data/org/openoffice/Office/UI/*Commands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/BasicIDECommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/DrawImpressCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/BibliographyCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/GenericCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/CalcCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/MathCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/ChartCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/StartModuleCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/DbuCommands.xcu ./officecfg/registry/data/org/openoffice/Office/UI/WriterCommands.xcu where Module is one the modules in AOO. sw - WriterCommands.xcu sd - DrawImpress.xcu sc - CalcCommands.xcu I have already been modifying: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/sd/uiconfig/sdraw/menubar/menubar.xml If changing this, do not modify the UNO command, only the menu structure. Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: TOOLS DRAW
Hello, ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/officecfg/registry/data/org/openoffice/Office/UI$ ls BaseWindowState.xcuDbTableDataWindowState.xcu MathWindowState.xcu BasicIDECommands.xcu DbTableWindowState.xcu StartModuleCommands.xcu BasicIDEWindowState.xcuDbuCommands.xcu StartModuleWindowState.xcu BibliographyCommands.xcu DrawImpressCommands.xcu WriterCommands.xcu CalcCommands.xcu DrawWindowState.xcu WriterFormWindowState.xcu CalcWindowState.xcuEffects.xcu WriterGlobalWindowState.xcu ChartCommands.xcu Factories.xcu WriterReportWindowState.xcu ChartWindowState.xcu GenericCategories.xcu WriterWebWindowState.xcu Controller.xcu GenericCommands.xcu WriterWindowState.xcu DbBrowserWindowState.xcu ImpressWindowState.xcu XFormsWindowState.xcu DbQueryWindowState.xcu makefile.mk DbRelationWindowState.xcu MathCommands.xcu I can not find: ModuleCommands.xcu I have already been modifying: http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/sd/uiconfig/sdraw/menubar/menubar.xml But after on the interface I can not see that I modify labels. Disappear.ar. 2013/2/27 Ariel Constenla-Haile arie...@apache.org Hi Ivan, On Tue, Feb 26, 2013 at 04:32:15PM -0600, jorge ivan poot diaz wrote: Hello, I try to change the name of a menu in draw. Only I want to learn how it works source code. I try to change: in DRAW From Tools Color Replacer to Tools test. I've been modifying: https://svn.apache.org/repos/asf/openoffice/trunk/main/helpcontent2/source/text/sdraw/guide/eyedropper.xhp But I have not results. This is only a help file. I think I'm changing something that should not. Help me please. What files I have to modify to do this. Every item in the menu bar, the toolbars, and the statusbar, is represented by a string that we call a UNO command. Menu bars, statusbars and toolbars are defined in XML files, they are usually located in module/uiconfig/[submodule/][uielement:menubar|statusbar|toolbar]/*.xml For the menubar and the statusbar you'll find only one xml file, because there is only one menubar and only one statusbar. Locate the menubar definition http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/sd/uiconfig/sdraw/menubar/menubar.xml and search for the command following the menu structure in the UI. Once you found the command, you can change the label (the text displayed in the UI). Labels for UNO commands are defined in configuration files, located in main/officecfg/registry/data/org/openoffice/Office/UI/ModuleCommands.xcu UNO commands that are used in more than one application and have the same label, are defined in GenericCommands.xcu. Note that your change will only modify the en-US string. You don't need to rebuild the whole office for this simple change, only officecfg and postprocess, then copy the respective modified file back in your installation (I leave this as homework ;) ). Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial UNO IDL
Hello Ariel, I need help making a tutorial. Can you help me? http://wiki.openoffice.org/wiki/Tutorial_Build I want to move faster. # es.openoffice.org 2013/2/21 jorge ivan poot diaz ivan.pootd...@gmail.com Hello Ariel, I understand that these tutorials are too old. In your opinion, what would be the best way I can learn, in addition to these tutorials. Could you give me some link, please. I would like to see tutorials on video, so I can understand better, and I can move faster. I feel that I'm too slow with tutorials. 2013/2/21 jorge ivan poot diaz ivan.pootd...@gmail.com I have completed this tutorial, only in this part: --- offapi/com/sun/star/ui/dialogs/XExecutableDialog.idl2004-06-04 07:19:19.0 +0530 +++ offapi/com/sun/star/ui/dialogs/XHelloWorldDialog.idl2005-07-21 14:46:31.0 +0530 @@ -59,8 +59,8 @@ * / -#ifndef __com_sun_star_ui_dialogs_XExecutableDialog_idl__ -#define __com_sun_star_ui_dialogs_XExecutableDialog_idl__ +#ifndef __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ +#define __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ #ifndef __com_sun_star_uno_RuntimeException_idl__ #include com/sun/star/uno/RuntimeException.idl @@ -79,25 +79,15 @@ */ -published interface XExecutableDialog: com::sun::star::uno::XInterface +published interface XHelloWorldDialog: com::sun::star::uno::XInterface { //- - /** Sets the title of the dialog. - - @param aTitle - Set an abitrary title for the dialog, - may be an empty string if the dialog should not - have a title. - */ - void setTitle( [in] string aTitle ); - - //- /** Executes (shows) the dialog. @returns A status code of type typeExecutableDialogResults/type. */ - short execute(); + void adios(); }; //= After the tutorial says I have to build (so what is necessary is first a 'build' in the offapi/ directory that then updates its database of types/interfaces), but when I build generates the error: 1. Entering /home/ivan/aoo/main/offapi/util 2. 3. EXISTENCE: published key /UCR/com/sun/star/ui/dialogs/XExecutableDialog exists only in registry 1 4. /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/regcompare: registries are incompatible: 1 differences! 5. dmake: Error code 11, while making '../ unxlngi6.pro/misc/registrycheck.flag' 6. ERROR: error 65280 occurred while making /home/ivan/aoo/main/offapi/util 7. 8. ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/offapi$ Of there what I can do? The tutorial is too old. Has a solution? Regards. 2013/2/21 Jürgen Schmidt jogischm...@gmail.com On 2/21/13 10:12 AM, Ariel Constenla-Haile wrote: On Thu, Feb 21, 2013 at 09:01:14AM +0100, Jürgen Schmidt wrote: On 2/21/13 4:44 AM, jorge ivan poot diaz wrote: Hello Juergen, What do you mean: A little bit more work... Let me check the tutorial later ... How I can solve this compatibility issue? Would you kindly tell me step by step how to solve it, please. I think it make no sense to explain this now in details because as I mentioned it should be rather seldom used. The tutorial which I have never recognized before is introducing a new type XHelloWorldDialog and here it should be allowed to change it. Which type do you try to change? The tutorial is replacing the css.dialogs.XExecutableDialog with XHelloWorldDialog, no wonder he gets the registry mismatch... he will also have to change all the places in the source tree where XExecutableDialog is used... a complete waste of time, and it doesn't teach anything; on the contrary, it will confuse newcomers. ok I missed the replacement, I did only a very quick look on it. It makes really no sense. IMHO we should mark all these tutorials as obsolete and put a big red warning on the pages. +1 this stuff makes no sense in this form. I would remove them directly. @Jorge, sorry for the confusion but we have indeed some outdated stuff in the wiki and we don't know all the places yet. As I mentioned before I never have seen this tutorial before. I recommend that you first try to complete a build and try debugging specific areas where you are most interested in. And please feel free to ask questions here. Juergen Regards
Re: Tutorial UNO IDL
I have completed this tutorial, only in this part: --- offapi/com/sun/star/ui/dialogs/XExecutableDialog.idl 2004-06-04 07:19:19.0 +0530 +++ offapi/com/sun/star/ui/dialogs/XHelloWorldDialog.idl 2005-07-21 14:46:31.0 +0530 @@ -59,8 +59,8 @@ * / -#ifndef __com_sun_star_ui_dialogs_XExecutableDialog_idl__ -#define __com_sun_star_ui_dialogs_XExecutableDialog_idl__ +#ifndef __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ +#define __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ #ifndef __com_sun_star_uno_RuntimeException_idl__ #include com/sun/star/uno/RuntimeException.idl @@ -79,25 +79,15 @@ */ -published interface XExecutableDialog: com::sun::star::uno::XInterface +published interface XHelloWorldDialog: com::sun::star::uno::XInterface { //- - /** Sets the title of the dialog. - - @param aTitle - Set an abitrary title for the dialog, - may be an empty string if the dialog should not - have a title. - */ - void setTitle( [in] string aTitle ); - - //- /** Executes (shows) the dialog. @returns A status code of type typeExecutableDialogResults/type. */ - short execute(); + void adios(); }; //= After the tutorial says I have to build (so what is necessary is first a 'build' in the offapi/ directory that then updates its database of types/interfaces), but when I build generates the error: 1. Entering /home/ivan/aoo/main/offapi/util 2. 3. EXISTENCE: published key /UCR/com/sun/star/ui/dialogs/XExecutableDialog exists only in registry 1 4. /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/regcompare: registries are incompatible: 1 differences! 5. dmake: Error code 11, while making '../ unxlngi6.pro/misc/registrycheck.flag' 6. ERROR: error 65280 occurred while making /home/ivan/aoo/main/offapi/util 7. 8. ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/offapi$ Of there what I can do? The tutorial is too old. Has a solution? Regards. 2013/2/21 Jürgen Schmidt jogischm...@gmail.com On 2/21/13 10:12 AM, Ariel Constenla-Haile wrote: On Thu, Feb 21, 2013 at 09:01:14AM +0100, Jürgen Schmidt wrote: On 2/21/13 4:44 AM, jorge ivan poot diaz wrote: Hello Juergen, What do you mean: A little bit more work... Let me check the tutorial later ... How I can solve this compatibility issue? Would you kindly tell me step by step how to solve it, please. I think it make no sense to explain this now in details because as I mentioned it should be rather seldom used. The tutorial which I have never recognized before is introducing a new type XHelloWorldDialog and here it should be allowed to change it. Which type do you try to change? The tutorial is replacing the css.dialogs.XExecutableDialog with XHelloWorldDialog, no wonder he gets the registry mismatch... he will also have to change all the places in the source tree where XExecutableDialog is used... a complete waste of time, and it doesn't teach anything; on the contrary, it will confuse newcomers. ok I missed the replacement, I did only a very quick look on it. It makes really no sense. IMHO we should mark all these tutorials as obsolete and put a big red warning on the pages. +1 this stuff makes no sense in this form. I would remove them directly. @Jorge, sorry for the confusion but we have indeed some outdated stuff in the wiki and we don't know all the places yet. As I mentioned before I never have seen this tutorial before. I recommend that you first try to complete a build and try debugging specific areas where you are most interested in. And please feel free to ask questions here. Juergen Regards
Re: Tutorial UNO IDL
Hello Ariel, I understand that these tutorials are too old. In your opinion, what would be the best way I can learn, in addition to these tutorials. Could you give me some link, please. I would like to see tutorials on video, so I can understand better, and I can move faster. I feel that I'm too slow with tutorials. 2013/2/21 jorge ivan poot diaz ivan.pootd...@gmail.com I have completed this tutorial, only in this part: --- offapi/com/sun/star/ui/dialogs/XExecutableDialog.idl2004-06-04 07:19:19.0 +0530 +++ offapi/com/sun/star/ui/dialogs/XHelloWorldDialog.idl2005-07-21 14:46:31.0 +0530 @@ -59,8 +59,8 @@ * / -#ifndef __com_sun_star_ui_dialogs_XExecutableDialog_idl__ -#define __com_sun_star_ui_dialogs_XExecutableDialog_idl__ +#ifndef __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ +#define __com_sun_star_ui_dialogs_XHelloWorldDialog_idl__ #ifndef __com_sun_star_uno_RuntimeException_idl__ #include com/sun/star/uno/RuntimeException.idl @@ -79,25 +79,15 @@ */ -published interface XExecutableDialog: com::sun::star::uno::XInterface +published interface XHelloWorldDialog: com::sun::star::uno::XInterface { //- - /** Sets the title of the dialog. - - @param aTitle - Set an abitrary title for the dialog, - may be an empty string if the dialog should not - have a title. - */ - void setTitle( [in] string aTitle ); - - //- /** Executes (shows) the dialog. @returns A status code of type typeExecutableDialogResults/type. */ - short execute(); + void adios(); }; //= After the tutorial says I have to build (so what is necessary is first a 'build' in the offapi/ directory that then updates its database of types/interfaces), but when I build generates the error: 1. Entering /home/ivan/aoo/main/offapi/util 2. 3. EXISTENCE: published key /UCR/com/sun/star/ui/dialogs/XExecutableDialog exists only in registry 1 4. /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/regcompare: registries are incompatible: 1 differences! 5. dmake: Error code 11, while making '../ unxlngi6.pro/misc/registrycheck.flag' 6. ERROR: error 65280 occurred while making /home/ivan/aoo/main/offapi/util 7. 8. ivan@ivan-Presario-CQ43-Notebook-PC:~/aoo/main/offapi$ Of there what I can do? The tutorial is too old. Has a solution? Regards. 2013/2/21 Jürgen Schmidt jogischm...@gmail.com On 2/21/13 10:12 AM, Ariel Constenla-Haile wrote: On Thu, Feb 21, 2013 at 09:01:14AM +0100, Jürgen Schmidt wrote: On 2/21/13 4:44 AM, jorge ivan poot diaz wrote: Hello Juergen, What do you mean: A little bit more work... Let me check the tutorial later ... How I can solve this compatibility issue? Would you kindly tell me step by step how to solve it, please. I think it make no sense to explain this now in details because as I mentioned it should be rather seldom used. The tutorial which I have never recognized before is introducing a new type XHelloWorldDialog and here it should be allowed to change it. Which type do you try to change? The tutorial is replacing the css.dialogs.XExecutableDialog with XHelloWorldDialog, no wonder he gets the registry mismatch... he will also have to change all the places in the source tree where XExecutableDialog is used... a complete waste of time, and it doesn't teach anything; on the contrary, it will confuse newcomers. ok I missed the replacement, I did only a very quick look on it. It makes really no sense. IMHO we should mark all these tutorials as obsolete and put a big red warning on the pages. +1 this stuff makes no sense in this form. I would remove them directly. @Jorge, sorry for the confusion but we have indeed some outdated stuff in the wiki and we don't know all the places yet. As I mentioned before I never have seen this tutorial before. I recommend that you first try to complete a build and try debugging specific areas where you are most interested in. And please feel free to ask questions here. Juergen Regards
Re: Tutorial UNO IDL
Hello Juergen, What do you mean: A little bit more work... Let me check the tutorial later ... How I can solve this compatibility issue? Would you kindly tell me step by step how to solve it, please. 2013/2/20 Juergen Schmidt jogischm...@gmail.com Am Mittwoch, 20. Februar 2013 um 01:55 schrieb jorge ivan poot diaz: Hello, I'm working on this tutorial: http://wiki.openoffice.org/wiki/Tutorial_UNO_IDL When I'm compiling I have the following error: we have a compatibility check at the end which checks changed API against a released version of the API, a reference type library. We normally don't allow incompatible API changes. They allowed only for specific changes and for major releases when a migration path is available and documented. A little bit more work... Let me check the tutorial later ... Juergen S Entering /home/ivan/aoo/main/offapi/com/sun/star/ui/dialogs dmake: Warning: -- Target [../../../../../ unxlngi6.pro/ucr/com/sun/star/ui/dialogs/XExecutableDialog.urd] was made but the time stamp has not been updated. : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/idlc -verbose @/tmp/mkhysZNf /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc: compiling 1 source files ... Compiling: XExecutableDialog.idl /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc: returned successful/home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc Version 1.1 rm -f ../../../../../unxlngi6.pro/ucr/cssuidialogs.db : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../../../../../unxlngi6.pro/ucr/cssuidialogs.dbUCR @/tmp/mkomhWDi dmake: Warning: -- Target [../../../../../ unxlngi6.pro/ucrdoc/com/sun/star/ui/dialogs/XExecutableDialog.urd] was made but the time stamp has not been updated. : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/idlc -verbose @/tmp/mk3F38Bl /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc: compiling 1 source files ... Compiling: XExecutableDialog.idl /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc: returned successful/home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/idlc Version 1.1 rm -f ../../../../../unxlngi6.pro/ucrdoc/cssuidialogs.db : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../../../../../unxlngi6.pro/ucrdoc/cssuidialogs.dbUCR @/tmp/mk7pbrFo .. .. .. .. .. .. .. Entering /home/ivan/aoo/main/offapi/util rm -f ../unxlngi6.pro/ucr/offapi.db : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../unxlngi6.pro/ucr/offapi.db / @/tmp/mkEYrNX8 : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../unxlngi6.pro/ucr/types.db / /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/udkapi.rdb rm -f ../unxlngi6.pro/ucrdoc/offapi_doc.db : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../unxlngi6.pro/ucrdoc/offapi_doc.db / @/tmp/mkEInjsk : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regmerge ../unxlngi6.pro/ucrdoc/types_doc.db / /home/ivan/aoo/main/solver/350/unxlngi6.pro/bin/udkapi_doc.rdb : LD_LIBRARY_PATH=/home/ivan/aoo/main/solver/350/ unxlngi6.pro/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}/home/ivan/aoo/main/solver/350/http://unxlngi6.pro/lib$%7BLD_LIBRARY_PATH:+:$%7BLD_LIBRARY_PATH%7D%7D/home/ivan/aoo/main/solver/350/ unxlngi6.pro/bin/regcompare -f -t
Re: Tutorial About
Hello Ariel, I have many questions about what I'm doing, After making the necessary modifications to the tutorial says, I have to compile. The compilation succeeds. Now my questions are: How I can see the changes made? What is the folder where I have to run to open sw and see the changes? The tutorial is this: http://wiki.openoffice.org/wiki/Tutorial_About 2013/2/15 Ariel Constenla-Haile arie...@apache.org Hi Jorge, On Fri, Feb 15, 2013 at 04:56:57PM -0600, jorge ivan poot diaz wrote: Hello Ariel, Yet I can not update from basis3.4 to basis4. I want to know the steps to do this. Please explain me step by step, that I understand. Why instead of have basis4 I have basis3.4? Did you update the source tree? Did you rebuild it? Try again with svn info and svn status. cd ROOT_SOURCE svn status If some files are marked with M, they have been modified by you, you might want to revert the changes. To update: svn update or the short form svn up Path:. URL: https://svn.apache.org/repos/asf/openoffice/trunk Repository Root: https://svn.apache.org/repos/asf Repository UUID: 13f79535-47bb-0310-9956-ffa450edef68 Revision: 1440197 Node type: directory Scheduled: normal Author of last change: alg Review of last change: 1439888 Date of last change: 01/29/2013 7:32:36 -0600 (Tue 29 Jan 2013) As you see, the last change is too old. If you update right now, you should be in revision 1446596. Once svn info tells you your source tree is up-to-date, you need to rebuild the whole source tree. Please refer to the Building guide: http://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO#Building Your source tree was rather old, it would be better to start a new clean build. First, remove all the old output tree: cd trunk/main source LinuxX86-64Env.Set.sh dmake clean Open a new terminal, and proceed as you did the first time you built: autoconf ./configure options ./bootsrap source LinuxX86-64Env.Set.sh cd main/instsetoo_native build --html --all If you have a multi-core computer, try the -P switch (For example, I use build --html --all -P8 -- -P4 and it builds in ca. 1:15 hrs with only en-US). Recall that we have chat channels, where communication is faster than via mail: irc://irc.freenode.net/dev.openoffice.org Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
Hello Ariel, How I can update 3.5 to 4.0? I would like to know step by step how to do this. Help me. 2013/2/14 Herbert Dürr h...@apache.org On 2013/02/14 2:27 AM, jorge ivan poot diaz wrote: How I can do a debug mode? Where I can find more information about the debug mode? http://wiki.openoffice.org/**wiki/Non_Product_Buildhttp://wiki.openoffice.org/wiki/Non_Product_Build is a good start for the debug mode of AOO. Also http://wiki.openoffice.org/**wiki/Debugginghttp://wiki.openoffice.org/wiki/Debugging is a good start for debugging AOO using gdb. Herbert
Re: Tutorial About
I have this subversion: svn co https://svn.apache.org/repos/asf/openoffice/trunk My question again, is how I can update basis3.4. to basis4? Explain me step by step please. 2013/2/14 Ariel Constenla-Haile arie...@apache.org On Thu, Feb 14, 2013 at 09:05:55PM -0600, jorge ivan poot diaz wrote: Hello Ariel, How I can update 3.5 to 4.0? are you using subversion? What's the output of cd SRC_ROOT svn info Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
Hello Ariel, output of cd SRC_ROOT svn info Path:. URL: https://svn.apache.org/repos/asf/openoffice/trunk Repository Root: https://svn.apache.org/repos/asf Repository UUID: 13f79535-47bb-0310-9956-ffa450edef68 Revision: 1440197 Node type: directory Scheduled: normal Author of last change: alg Review of last change: 1439888 Date of last change: 01/29/2013 7:32:36 -0600 (Tue 29 Jan 2013) 2013/2/14 jorge ivan poot diaz ivan.pootd...@gmail.com I have this subversion: svn co https://svn.apache.org/repos/asf/openoffice/trunk My question again, is how I can update basis3.4. to basis4? Explain me step by step please. 2013/2/14 Ariel Constenla-Haile arie...@apache.org On Thu, Feb 14, 2013 at 09:05:55PM -0600, jorge ivan poot diaz wrote: Hello Ariel, How I can update 3.5 to 4.0? are you using subversion? What's the output of cd SRC_ROOT svn info Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
Hello Ariel, I did the patch you told me, but I have not results. I would like to know what would be the equivalent of a code tutorial about for this new source code to generate the button. 2013/2/12 Ariel Constenla-Haile arie...@apache.org Hi Jorge, On Tue, Feb 12, 2013 at 12:06:12AM -0600, jorge ivan poot diaz wrote: Here is the changes I made, I declare the button according to the tutorial, but I have not the expected results. http://ooo.pastebin.ca/2313036 http://ooo.pastebin.ca/2313037 The changes I have done well, as each code I put it where it belongs. But it's not simply putting code. You need to compile the code, and you''ll the errors: main/cui/source/dialogs/about.cxx: In constructor 'AboutDialog::AboutDialog(Window*, const ResId)': main/cui/source/dialogs/about.cxx:285:33: error: 'ABOUT_BTN_OK' was not declared in this scope main/cui/source/dialogs/about.cxx: In member function 'void AboutDialog::LayoutControls(Size)': main/cui/source/dialogs/about.cxx:446:30: error: 'aOutSiz' was not declared in this scope The errors speak for themselves: aOKSureButton( this, ResId( ABOUT_BTN_OK, *rId.GetResMgr() ) ), here, ABOUT_BTN_OK is not defined. In the new code, the define is RID_CUI_ABOUT_BTN_OK aOKSurePnt.X() = 135 + ( aOutSiz.Width() - aOKSureSiz.Width() ) / 2; there is no variable named aOutSiz in the current code. Besides, this hard coded layout won't work with the new code (all the layout is calculated relative to the two pictures, the logo (the orb) on the left and the header on the top. Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
I understand the changes but that should not impede the buttons may not work as I applied the instructions in the required classes. So why not work? 2013/2/11 Ariel Constenla-Haile arie...@apache.org On Mon, Feb 11, 2013 at 11:26:22PM -0300, Ariel Constenla-Haile wrote: ]$ cd SRC_ROOT/main/cui ]$ cat PATH_TO_PATH | patch -p1 if you are in main/cui it should be -p3 instead of -p1 ]$ build debug=true dbglevel=3 deliver ]$ cp -fv unxlngx6/lib/libcui.so BASIS_DIR/basis4.0/program/libcui.so -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
Here is the changes I made, I declare the button according to the tutorial, but I have not the expected results. http://ooo.pastebin.ca/2313036 http://ooo.pastebin.ca/2313037 The changes I have done well, as each code I put it where it belongs. 2013/2/11 jorge ivan poot diaz ivan.pootd...@gmail.com I understand the changes but that should not impede the buttons may not work as I applied the instructions in the required classes. So why not work? 2013/2/11 Ariel Constenla-Haile arie...@apache.org On Mon, Feb 11, 2013 at 11:26:22PM -0300, Ariel Constenla-Haile wrote: ]$ cd SRC_ROOT/main/cui ]$ cat PATH_TO_PATH | patch -p1 if you are in main/cui it should be -p3 instead of -p1 ]$ build debug=true dbglevel=3 deliver ]$ cp -fv unxlngx6/lib/libcui.so BASIS_DIR/basis4.0/program/libcui.so -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial About
Here are the patch. 2013/2/12 jorge ivan poot diaz ivan.pootd...@gmail.com Here is the changes I made, I declare the button according to the tutorial , but I have not the expected results. http://ooo.pastebin.ca/2313036 http://ooo.pastebin.ca/2313037 The changes I have done well, as each code I put it where it belongs. 2013/2/11 jorge ivan poot diaz ivan.pootd...@gmail.com I understand the changes but that should not impede the buttons may not work as I applied the instructions in the required classes. So why not work? 2013/2/11 Ariel Constenla-Haile arie...@apache.org On Mon, Feb 11, 2013 at 11:26:22PM -0300, Ariel Constenla-Haile wrote: ]$ cd SRC_ROOT/main/cui ]$ cat PATH_TO_PATH | patch -p1 if you are in main/cui it should be -p3 instead of -p1 ]$ build debug=true dbglevel=3 deliver ]$ cp -fv unxlngx6/lib/libcui.so BASIS_DIR/basis4.0/program/libcui.so -- Ariel Constenla-Haile La Plata, Argentina
Re: Tutorial Impress
http://wiki.openoffice.org/wiki/Tutorial_Impress I'm in this tutorial but my question is: 1. What will I do with the codes? 2. How I can see the results? Help me! 2013/2/5 Kay Schenk kay.sch...@gmail.com On Tue, Feb 5, 2013 at 11:19 AM, Regina Henschel rb.hensc...@t-online.de wrote: Hi, Kay Schenk schrieb: On Tue, Feb 5, 2013 at 9:30 AM, jorge ivan poot diaz ivan.pootd...@gmail.com wrote: I'm in this tutorial but my question is: 1. What will I do with the codes? 2. How I can do it? Help me! Please look at the bottom of the page, you see 21. Dezember 2006. So it is an old tutorial. Nevertheless it might be useful, if you will work Impress. Do you want to work in Impress? The tutorial shows you, how to add an item to the context menu of a selected graphic. If you want to work in that area, you can try to understand the code and have a look, how this feature is actually implemented and whether the description is still correct. Do you have already found a topic you want to work on? Could you give us more information, the URL link, to the tutorial you're looking at. Hi Kay, it is http://wiki.openoffice.org/**wiki/Tutorial_Impress http://wiki.openoffice.org/wiki/Tutorial_Impress Thanks Regina. It looked almost like Jorge's original message got truncated or something, so it was a mystery to me. You may also find the forums, http://user.services.**openoffice.org/ http://user.services.openoffice.org/ or users mailing list, http://openoffice.apache.org/**mailing-lists.html http://openoffice.apache.org/mailing-lists.html helpful. I think, Jorge will become a developer for Apache OpenOffice. Kind regards Regina -- MzK A great deal of talent is lost to the world for want of a little courage. -- Sydney Smith
ERROR: File not found: odkcommon.zip odkexamples.zip
I have the following error, help me: ERROR: The following files could not be found: ERROR: File not found: odkcommon.zip ERROR: File not found: odkexamples.zip ... cleaning the output tree ... ... removing directory /tmp/ooopackaging/i_103681360008041 ... ** ERROR: ERROR: Missing files in function: remove_Files_Without_Sourcedirectory ** ** ERROR: Saved logfile: /home/ivan/aoo/main/instsetoo_native/ unxlngi6.pro/Apache_OpenOffice_SDK/deb/logging/en-US/log_AOO350_en-US.log ** Mon Feb 4 14:00:42 2013 (00:01 min.) dmake: Error code 255, while making 'sdkoo_en-US.deb' 1 module(s): instsetoo_native need(s) to be rebuilt Reason(s): ERROR: error 65280 occurred while making /home/ivan/aoo/main/instsetoo_native/util When you have fixed the errors in that module you can resume the build by running: build --all:instsetoo_native What is the solution for this error?
Re: 1 module(s): instsetoo_native need(s) to be rebuilt
I already run: ./configure --with-epm-url= http://ftp.easysw.com/pub/epm/3.7/epm-3.7-source.tar.gz But then I have the following error: checking for external/unowinreg/unowinreg.dll... configure: WARNING: not found, will be cross-built using mingw32 configure: error: for rebuilding unowinreg.dll you need the mingw32 C++ compiler. Specify mingw32 g++ executable name with --with-mingwin. Or use prebuilt one from http://tools.openoffice.org/unowinreg_prebuild/680/ and put it into external/unowinreg I don'ot know what is noname. 2013/2/2 Ariel Constenla-Haile arie...@apache.org Hello Jorge, On Sat, Feb 02, 2013 at 03:28:53PM -0600, jorge ivan poot diaz wrote: I have the following error, help me: ERROR: ERROR: More than one new package in directory This might be because you are using the epm from your distro. The build system requires a patched version. Try running configure with the switch: --with-epm-url=http://ftp.easysw.com/pub/epm/3.7/epm-3.7-source.tar.gz I put the following command: build - from instsetoo_native In this case, there is no need to use the --from switch, you are building the last module, so simply do cd instsetoo_native build If you have a multiprocessor CPU, run build -- -PN where N is the number of processes you want to run at the time, for example build -- -P2 Regards -- Ariel Constenla-Haile La Plata, Argentina
Re: Ubuntu Build Instructions
Hello Herbert Duerr, Thank you for your help. I sorry for not write good my questions. The number 3: - Lack requirement to install? Regards Ivan Poot 2013/1/30 AlanSan alan.pucp...@gmail.com Le 01/29/2013 09:41 PM, jorge ivan poot diaz a écrit : Hello I have a problem: Ubuntu Build Instructions I did all the instructions but eventually tells me I have the following code: sudo apt-get install python-dev ccache libgraphite-dev \ libwpd8-dev libxslt-dev libdb4.7-dev libhunspell libneon27-dev-dev-dev libaltlinuxhyph Where generates me an error saying that the package libdb4.7-dev is not available, but some other package refers to it. This may mean that the package is missing, has been obsoleted, or is only available from another source. 1. What should I do? 2. What are the possible causes of this? 3. Shortness requirements to install? 4. I'm using Ubuntu 10.4 5. I installed OpenJDK. Hello Ivan, this error happens because canonical has been removed this library from their repositories, you can download the library from this page: https://launchpad.net/ubuntu/+**source/db4.7/4.7.25-10https://launchpad.net/ubuntu/+source/db4.7/4.7.25-10 AlanSan.
Re: SVN
I've read the guides in OpenOffice.org, now I have the questions for Getting the source: SVN is a version control system used for multiple developers to work on the same project. So far I've done: Get the source via Subversion: svn co https://svn.apache.org/repos/asf/openoffice/trunk aoo. Finished. Installing Subversion: apt-get update apt-get install subversion ( Finished) Please help me with my questions: 1. What step next? 2. How I can do? 3. Where to find information on the Internet? 4. Do any forum where I can learn more? 5. What tools do I need for SVN? 6. What subversion, I need another? 7. How I can start using the SVN? 8. Where I can contact other users working with this tool? 9. What essentials I need to know? 10. Why do you use SVN for this type of work? 11. Can you give me an example of how it works? 2013/1/26 Dennis E. Hamilton orc...@apache.org For someone who is not an Apache Committer, it is necessary to turn the changes made in a working copy into patches and submit the patches to Apache OpenOffice. There is a web page that describes some of this. The patches can be submitted as attachments to a bug report (the preferred approach). - Dennis -Original Message- From: Saransh Sharma [mailto:sara...@theupscale.in] Sent: Saturday, January 26, 2013 00:42 To: dev@openoffice.apache.org Subject: Re: SVN After checkout you will pull the data from the source or tree and ait will be stored to your local file ...if you need more help like getting started ... 1.You can start working on the codes and if you are a svn member you would be able toadd those files changes to the tree by using commit on svn SO can you define more about your usage so that i can help On Sat, Jan 26, 2013 at 2:07 PM, jorge ivan poot diaz ivan.pootd...@gmail.com wrote: I have read about SVN, is a very useful tool for the development of projects. On this page http://lihuen.linti.unlp.edu.ar/index.php?title=C%C3% B3mo_usar_SVN there is information. I have installed the subversion but my question is: After the checkout what I have to do? I need more information to start working. Help me. -- Best Regards Saransh Sharma Upscale Consultancy PVT LTD. Disclaimer: -- This email was sent from within the Upscale Consultancy Services Pvt Ltd. The contents of this email, including the attachments, are LEGALLY PRIVILEGED AND CONFIDENTIAL to the intended recipient at the email address to which it has been addressed. If you receive it in error, please notify the sender immediately by return email and then permanently delete it from your system.The unauthorized use, distribution, copying or alteration of this email, including the attachments, is strictly forbidden. Thank you.Please note that neither Upscale Group nor the sender accepts any responsibility for viruses and it is your responsibility to scan the email and attachments (if any). --