[e-smith-devinfo] SME 5.6
Hello , Great !!! I won't have to compile the driver using a 2.2 kernel Aug 20 02:45:51 mitel-networks-server bootstrap-console: Bringing up interface eth0: Aug 20 02:45:51 mitel-networks-server kernel: ns83820.c: National Semiconductor DP83820 10/100/1000 driver. Aug 20 02:45:51 mitel-networks-server kernel: eth0: ns83820 v0.17: DP83820 v1.2: 00:50:ba:38:95:f6 io=0xdb00 irq=11 f=sg Aug 20 02:45:51 mitel-networks-server kernel: eth0: link now down. Aug 20 02:45:53 mitel-networks-server network: Bringing up interface eth0: succeeded Aug 20 02:53:23 e-smith kernel: eth0: link now down. Aug 20 02:54:30 e-smith kernel: eth0: link now 1000 mbps, full duplex and up. Way to go !! All I have to do is setup a Darwin Streaming Server ;p Good Job Charly -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
[e-smith-devinfo] Kernel source headers
Hello all, I've read a lot about kernel source and headers, but I still don't know where to find them. I need those to compile a driver for D-Link DGE500T Gigabit adapter. Can someone tell me where I can find them please? -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] Kernel source headers
Bonjour Andre Joanisse, Thanks a lot ! mardi 9 juillet 2002, 15:24:05, vous avez écrit: AJ Hi Bertrand, AJ in the e-smith.org contributed how-to documents, you would have found a link AJ to Darrell May's How-To. AJ http://www.myezserver.com/downloads/mitel/contrib/dev-tools/kernel-src-howto.html AJ Cheers, AJ André AJ PS: Darrell was also nice enough to have them available on his server at: AJ http://myezserver.com/downloads/mitel/contrib/dev-tools/ AJ But try rpmfind and look for some close to you. AJ On Tue, 9 Jul 2002 14:04, Bertrand CHERRIER wrote: Hello all, I've read a lot about kernel source and headers, but I still don't know where to find them. I need those to compile a driver for D-Link DGE500T Gigabit adapter. Can someone tell me where I can find them please? -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[3]: [e-smith-devinfo] Kernel source headers
Bonjour, Well in fact Darrell's rpm are not up to date for the sme 5.5 needed versions are 2.96-98 for cpp gcc and libstdc++ for glibc-devel 2.2.4-24 is needed. But now the problem is for installing the kernel sources. Should I force it or not ? (I don't think I should) Maybe if Mitel could provide us with the kernel source and headers used for SME 5.5, life would be much easier ... BC mardi 9 juillet 2002, 15:24:05, vous avez écrit: AJ Hi Bertrand, AJ in the e-smith.org contributed how-to documents, you would have found a link AJ to Darrell May's How-To. AJ http://www.myezserver.com/downloads/mitel/contrib/dev-tools/kernel-src-howto.html AJ Cheers, AJ André AJ PS: Darrell was also nice enough to have them available on his server at: AJ http://myezserver.com/downloads/mitel/contrib/dev-tools/ AJ But try rpmfind and look for some close to you. AJ On Tue, 9 Jul 2002 14:04, Bertrand CHERRIER wrote: Hello all, I've read a lot about kernel source and headers, but I still don't know where to find them. I need those to compile a driver for D-Link DGE500T Gigabit adapter. Can someone tell me where I can find them please? -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] Mitel Networks announces SME Server version 5.5
Hello, Juste wondering what happened to the MP3 jukebox blade ? In case of an update from 5.1.2 will it still be there ? -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] fr_CA instead of fr in 5.5 beta
Hello Gordon Rowell, Hi. This is the qmail-send program at e-smith.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. [EMAIL PROTECTED]: Sorry, no mailbox here by that name. (#5.1.1) lundi 10 juin 2002, 00:20:06, vous avez écrit: GR If you would like to help out with other translations, please GR join the translations list at [EMAIL PROTECTED] -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] Antivirus for SME
Hello Jaime Nebrera Herrera, Yes, but they're moving on a per user basis, and worse, alias are considered as a mailbox !!! So in the end it's far more expensive ! (and the qmailscanner is still buggy) mardi 28 mai 2002, 02:36:56, vous avez écrit: JNH BTW, avp has lowered a lot their prices. It might be a good alternative as JNH it offers the possibility to scan web traffic too. JNH Regards. -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] Big Brother/Big Sister
Hello Jeff Coleman, I've installed without too much trouble Netsaint 007, I'll try to do a howto if I've got spare time today ... jeudi 28 mars 2002, 01:50:45, vous avez écrit: JC Big Brother/Sister, Netsaint or some other similar product would be JC GREAT! I volunteer to help test any install and frankly, if required, JC would help to underwrite the costs to build an SME rpm. JC Our company could really use this JC -jeff -Original Message- From: litle bark, BIG BYTE!! [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 27, 2002 7:05 AM To: [EMAIL PROTECTED] Subject: [e-smith-devinfo] Big Brother/Big Sister Has anyone looked at incorporating either big brother or big sister JC http://bigsister.graeff.com/ into SME? JC Thanks JC Garret JC -- JC Please report bugs to [EMAIL PROTECTED] JC Please mail [EMAIL PROTECTED] (only) to discuss security issues JC Support for registered customers and partners to [EMAIL PROTECTED] JC To unsubscribe, e-mail: [EMAIL PROTECTED] JC For additional commands, e-mail: [EMAIL PROTECTED] JC Archives by mail and JC http://www.mail-archive.com/devinfo%40lists.e-smith.org JC -- JC Please report bugs to [EMAIL PROTECTED] JC Please mail [EMAIL PROTECTED] (only) to discuss security issues JC Support for registered customers and partners to [EMAIL PROTECTED] JC To unsubscribe, e-mail: [EMAIL PROTECTED] JC For additional commands, e-mail: [EMAIL PROTECTED] JC Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Hardware support (Re: another idea for development iso contribs)
Hello Charlie Brady, CB On Fri, 15 Feb 2002, Jaime Nebrera Herrera wrote: Agreed. Could it be possible to do it for 4.1.2 versin too? I mean, some of us are tied to this release due to the lack of some hardware support in SME :( CB What hardware does 4.1.2 work with which SME5 doesn't? D-Link 530TX+ (REV A) :-) -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
[e-smith-devinfo] Update 5-03 ... problem with samba
On a fresh install, I was to update to 5-02 when I saw that 5-03 was out ... so I've upgraded to 5-03 ! Now I can't get a user to connect to a share directory ... seems samba is not working properly. I still can log on the domain (with a win 9.x) but without the execution of the logon script. No network maping is possible. I know it's not really the list where to post this message, but if by any chance someone know the trick it would be a great help to me. PS: excuse my english ... too early in the morning to get anything better ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Update 5-03 ... problem with samba
Bonjour Bertrand CHERRIER, replying to my own mail ... I've forced the update back to 5-02 ... after a reboot, but still not much, but I can now see the primary ibay but that's all ... 5-03 is not on the ftp.e-smith.org yet so I can't see what new packages have been updated ... to remove them ! If someone can tell me what was new with this update ... so I can get rid of it ! mardi 27 novembre 2001, 09:41:29, vous avez écrit: BC On a fresh install, I was to update to 5-02 when I saw that 5-03 was out ... so I've upgraded to 5-03 ! BC Now I can't get a user to connect to a share directory ... seems samba is not working properly. BC I still can log on the domain (with a win 9.x) but without the execution of the logon script. BC No network maping is possible. BC I know it's not really the list where to post this message, but if by any chance someone know the trick it would be a great help to me. BC PS: excuse my english ... too early in the morning to get anything better ! -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] PHP 4.03
Hello Richard Ford, ah ? I'm using Zend Optimizer with PHP 4.0.4pl2 (http://www.linux-nc.org) and 4.0.6 (http://www.oleti.net) ... did you try the latest version ? PS: Haven't tried it on e-smith but I can't see any reason why it shouldn't work ... vendredi 2 novembre 2001, 02:11:17, vous avez écrit: RF G'Day All, RF Would wanting to install PHP 4.0.3 instead of the standard 4.0.4 on a new RF SME5 a recipe for trouble? The Zend Optimiser has this rather annoying RF exact (old) version requirement. :( RF Richard Ford. RF [EMAIL PROTECTED] www.cubok.com -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Panda Antivius
Hello Jaime Nebrera Herrera, Just to add my 2cents, Kaspersky Anti-Virus works great on e-smith 4.x 5 and includes a module for qmail ... the only bug i've found was with imp, after kav is operational, it's impossible to send an email through the webmail system ... And the update works :) jeudi 1 novembre 2001, 09:37:16, vous avez écrit: JNH Hi all, JNH I don't know if Panda Antivirus is known abroad but here in Spain is JNH considered one of the best antivirus by most of the PC magazines JNH comparatives. JNH Well, they have released a FREEWARE version of their software for LINUX. JNH Until now it didn´t work in e-smith but their last version DOES. JNH Is a comand only antivirus, fully automatic. It can search for virus in JNH compresed files, can use heuristic methods and comes in rpm format (tested JNH in ESGS 4.1.2). I understand this is a reduced version compared to all their JNH software offer, but hell, this might be something to consider :) JNH The only problem I know if is that there is no update service. They make JNH a new release every month and thats it. It comes without support. I think JNH you can't just update the virus database for example :( JNH It works in english and spanish. You can find it in www.pandasoftware.com JNH Maybe we could work in some project to link it with e-smith's mail system, JNH just to make for a perfect day :))) JNH Regards and hope you like it. JNH --- JNH Jaime Nebrera - [EMAIL PROTECTED] JNH -- JNH Please report bugs to [EMAIL PROTECTED] JNH Please mail [EMAIL PROTECTED] (only) to discuss security issues JNH Support for registered customers and partners to [EMAIL PROTECTED] JNH To unsubscribe, e-mail: [EMAIL PROTECTED] JNH For additional commands, e-mail: [EMAIL PROTECTED] JNH Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
[e-smith-devinfo] Re: Was Re: [e-smith-devinfo] Panda Antivius now Kaspersky
Hello Rod, No, the only special thing is on the kavkeeper.ini (the qmail module) you have to set the administrator as [EMAIL PROTECTED] (I think it's because [EMAIL PROTECTED] is an alias), otherwise you'll get thousands of messages when a virus will be detected, for the rest just follow the Install.qmail doc and don't care about the error message when using the chkconfig --add kavdaemon.rh The other thing is to first launch the kavupdater.sh, it will load the kavdaemon. I'm working on building an RPM, but it's my first one so don't expect it too early :) jeudi 1 novembre 2001, 18:31:09, vous avez écrit: ST Any special hints / tips / problems with getting Kaspersky running on ST e-smith? ST Rod -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] new AWStats RPM available
Hello Michael Weinberger, It's working fine, but there is something weird : My e-smith (4.1.2) is in server-only mode, no one accesses it outside working hours, but still I have visits 24 hours a day. 150 hits, 150 pages view with 5.32Mb, of course during working hours it much more ... and the host name who does the visits is : my sever's host name ! If anyone has a clue ... vendredi 5 octobre 2001, 13:27:21, vous avez écrit: MW I have packaged a new AWStats RPM (Web Statistics) for SME5. MW This package is based on latest stable AWStats 3.1 by Laurent Destailler. MW Visit Laurent's site at http://awstats.sourceforge.net to get more details. MW The upgrade urgency is low, since the previous package e-smith-awstats-2.24.1- MW B3.noarch.rpm is fully functional with the new SME5. The new package is only MW tested on SME5, but I don't expect any problem with e-smith 4.1.x MW You can download the new awstats-sme-server-1.0.0-1.noarch.rpm from MW http://neddix.de/e-smith/misc/awstats.php -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] [DRAFT] updated RAV HowTo's + updated rpm/download
Bonjour Darrell May, it seems that the file is not complete and it's not (yet) available from th rav website :( gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error exit delayed from previous errors mercredi 26 septembre 2001, 18:54:02, vous avez écrit: DM OK, RAV have now released 8.3.0 publically. Some minor changes have DM occured from the pre-release. Grab the download via the Howto and simply DM perform an install/update. This is for both 4.1.2/SME5 RAV users. DM Changes are most notably in the revised 'ravupdate' script which was DM previously run daily in cron.daily. The script has been rewritten, DM renamed 'ravupdate.sh', and it is now recommended to run ravupdate.sh DM every 30 minutes. What this now does is permit RAV to check for new DM virus definitions every 30 minutes! The RAV HowTo explains the new set DM up for this. DM http://myezserver.com/docs/mitel/rav-howto.html DM Next the RAV command-line syntax has changed. The RAVSCAN HowTo explains DM the new set up for this. DM http://myezserver.com/docs/mitel/ravscan-howto.html DM Comments are welcomed. DM Regards, -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[3]: [e-smith-devinfo] SquidGuard 2 Development
Bonjour Charlie Brady, Oooppss didn't knew you've made one :) I had a look at it, install it, is it supposed to be in the webmanager ?? I've tried http://myserver/phpSysinfo ... without success :( I'll get the src and have a look at it ... as I use it a lot, I might (with your approval) upgrade it to the latest version ... vendredi 24 août 2001, 09:07:07, vous avez écrit: CB On Fri, 24 Aug 2001, Bertrand CHERRIER wrote: CB Have you looked at my contrib, e-smith-phpsysinfo? Not that I would mind CB you doing another version, but it might save you a little work to start CB with mine. CB It hasn't been updated in a while, so it's not the latest version. -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] IMP/Webmail security advisory for e-smith 4.1.2
Hello Gordon Rowell, Thanks for the reply ! I've done some work myself :) and I work out the pb, the file config.php gets unreadable if modified via the admin page ! So the trick is to configure it via the console, and chmod 444 ! You've got a golden product, it seems unreal what I can do with my box in just a few moves ! Again thanks for such a great disto ! lundi 20 août 2001, 19:37:54, vous avez écrit: GR PHPnuke is not part of e-smith and is unsupported. We also only GR currently support MySQL as the backend for webmail. GR These upgrades have been tested on a standard e-smith 4.1.2 machine with GR all available official updates. So if anyone has any idea of where it could be coming from ... GR I'll defer to the other people on the list with more PHP/MySQL/PHPNuke GR experience. -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] IMP/Webmail security advisory for e-smith 4.1.2
Hello Gordon Rowell, I've done the upgrade, with not a single problem, but then my php-nuke on the primary ibay gives me this : Unable to select database I thought the pb was with MySQL, but all others databases are available, I can get to my nuke database via phpMyAdmin, and the user used to access it as full privileges (it's on an Intranet, behind a firewall) and my webmail is working just fine but not in french anymore :) So if anyone has any idea of where it could be coming from ... jeudi 16 août 2001, 11:42:11, vous avez écrit: GR -BEGIN PGP SIGNED MESSAGE- GR Hash: SHA1 GR FTP=ftp://ftp.e-smith.com/pub/e-smith/updates/4.1.2/RPMS/noarch/ GR rpm -Uvh $FTP/horde-1.2.6-2es.noarch.rpm GR rpm -Uvh $FTP/horde-mysql-1.2.6-2es.noarch.rpm GR rpm -Uvh $FTP/imp-2.2.6-2es.noarch.rpm -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Release 1 of squidguard for ESSG
Hello Trevor Ouellette, Looks exactly like the one I needed !!! Great job ! I only had this : ./create-squidguard: /sbin/signal-event: No such file or directory But that was I guess because my squid wasn't running... And in the end : Please reboot your server now (WHY WOULD I ) Everything is working by the book it's great ! Thanks mercredi 1 août 2001, 16:26:04, vous avez écrit: TO How to Install the gc-guard system -- Any beta testers?? TO Log in as root to your ESSG server. TO mkdir /squidguard TO cd /squidguard TO wget -nv http://www.greencomputer.com/gc-guard-1.tar TO tar -xf gc-guard-1.tar TO ./create-squidguard TO That's it! The settings can be found under Security, Content Filtering. TO There is link to a help at the bottom of that page. TO It updates it's blacklist once a week, administrators can update/remove TO domains, expressions and URL's from a GUI in the manager, admins can also TO allow specific IP's to have Full access to the Internet instead of the TO default filtered access. TO Give it a go... GRIN TO Thanks to Darrell May, JL (for the sudo stuff), and of course Lorenzo! I TO hope I didn't forget anybody! TO Trev. -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] Imap - UID problem
G'day Michael Doerner, I had the same problem with IMP after an update from 4.1.1 to 4.1.2, it was impossible to access an account from the webmail, in my case, I had only 12 accounts, so it was easily done, I just had to reconfirm all the passwords (through the webadmin interface), and it was done ! good luck ! mercredi 1 août 2001, 07:56:31, vous avez écrit: MD Update: MD I can fix the problem temporarily by deleting that .uidvalidity file but MD very soon after that I keep getting the same problem again, in all different MD imap folders. :-( MD That means my last night's thoughts what caused it were wrong. MD Anybody else who might have some ideas for that? MD I just don't want to give up on imap now. It looks like the ideal MD integration with webmail ... MD Thanks, MD Michael Doerner -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
[e-smith-devinfo] SSH Security
Hello , Will there be an e-smith patch for this ??? Weakness Found in OpenSSL PRNG Algorithm Summary The pseudo-random number generator (PRNG) in SSLeay/OpenSSL versions up to 0.9.6a is weakened by a design error. Knowing the output of specific PRNG requests (including a number of consecutive very short PRNG requests) would allow an attacker to determine the PRNG's internal state and thus to predict future PRNG output. Typical applications (including applications using OpenSSL's SSL/TLS library) are not vulnerable to this attack because PRNG requests usually happen in larger chunks. However, it is strongly recommended to upgrade to OpenSSL 0.9.6b, which includes a fixed PRNG. If upgrading to 0.9.6b is not immediately possible, the source code patch contained at the end of this advisory should be applied. -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] PHP Upgrade Howto now on e-smith.org
Hello Dan Brown, Just to add my 2 cents, on php.net, they say to upgrade from 4.0.4 to 4.0.6 that features many bug fixes from PHP 4.0.5, and is especially much more efficient in its memory requirements ... souldn't it be better to wait a little more for a RPM release of php 4.0.6 ??? and by the way could someone turn on the force reply to list option ?? mardi 10 juillet 2001, 08:07:55, vous avez écrit: DB I'm glad to announce that my PHP Upgrade HOWTO is now available on DB e-smith.org, after having been HTML-ized by Darrell May and making a few DB edits for content. You can view it at DB http://www.e-smith.org/docs/howto/contrib/php-upgrade-howto.html. Let DB me know if you have any comments. -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher ! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re[2]: [e-smith-devinfo] e-smith registrations
Hello Stanislaw Winiecki, I was thinking exactly the same thing !! As the president of a non-profit association, $600 is almost twice our yearly budget !!! But still we are using e-smith as well as other distributions ... But if we could help (by any way) to support this great job, we surely will. mardi 27 février 2001, 23:02:38, vous avez écrit: SW $600 is out of question at the moment in my case, but something easier on SW the budget (and boss's ears) might work sooner, and I'm _really_willing_ to SW support this remarkable product and company financially sooner or later - SW the lower the price - the sooner :)). SW Regards SW Stan -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher !
Re[4]: [e-smith-devinfo] Additional Webserver behind gateway
Hello Garret Acott, Seems you've never used it before ... Go to the hardware panel, then network configuration, and interfaces, there you are All you have to do is to add a new (virtual) interface, and decide wether or not you want it to be activated at boot ... that's it ! The end (for tonite it's 1am here !) G'nite dimanche 4 mars 2001, 01:05:00, vous avez écrit: GA And webmin gives me the ability to do what I am looking to do? And if so, GA how? If you don't mind :-) GA Garret GA - Original Message - GA From: Bertrand CHERRIER [EMAIL PROTECTED] GA To: Garret Acott [EMAIL PROTECTED] GA Sent: Saturday, March 03, 2001 6:35 AM GA Subject: Re[2]: [e-smith-devinfo] Additional Webserver behind gateway Hello Garret Acott, Maybe you should try to install Webmin ... But don't forget not to interfere with original e-smith templates :) I'm using the latest one, it's working nice ... dimanche 4 mars 2001, 00:23:41, vous avez écrit: GA Okay then, now wer're getting down to it. How do I assign more than GA one GA external IP address to my e-smith server? Or a block of IP addresses? GA Garret GA - Original Message - GA From: Tim Litwiller [EMAIL PROTECTED] GA To: [EMAIL PROTECTED] GA Sent: Friday, March 02, 2001 9:46 PM GA Subject: Re: [e-smith-devinfo] Additional Webserver behind gateway I went to my shell in on the e-smith machine and typed: EXTIP=216.17.146.139 INTIP=192.168.1.3 ipmasqadm portfw -a -P tcp -L $EXTIP 80 -R $INTIP 80 the way I understand it that will not work the request for that ip will never be answered by the e-smith because GA it GA hasn't be assigned to answer to that address this would be like telling your dog to get and deliver the nieghbors GA mail GA to your door when he is penned in your yard. the only way to make something like this work would be to assign more GA than GA one external ip to the e-smith so it actually had that address and packets GA looking for that address would come knocking. Garret Acott wrote: I'm sorry, There was a fairly indepth discussion the other day about this. I GA feel GA that I am so close to either understanding it or an answer that I have to GA try again. Please, somebody help me with this. Garret Here is the repost: Dan, Okay then, I must really be missing something. If you could please GA tell GA me where I've gone wrong, or maybe my whole idea of how this should work GA is wrong. I have an e-smith server on a network and another Linux GA machine sitting behind it. I have a block of IP addresses the e-smith ip is 216.17.146.X41, it works. I would like to assign the ip of GA 216.17.146.X39 to my Linux machine on the network running an interior ip of GA 192.168.1.3, GA where the e-smith is 192.168.1.1. I went to my shell in on the e-smith machine and typed: EXTIP=216.17.146.139 INTIP=192.168.1.3 ipmasqadm portfw -a -P tcp -L $EXTIP 80 -R $INTIP 80 Typing the ip of 216.17.146.139 should take me to the server on my GA internal machine shouldn't it? Am I missing something? Am I dense? - Original Message - From: Dan B [EMAIL PROTECTED] To: Garret Aott [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, February 28, 2001 2:33 PM Subject: Re: [e-smith-devinfo] Additional Webserver behind gateway At 04:57 AM 2/28/2001 -0700, Garret Aott wrote: Dan, Isn't ipmasqadm already installed on the e-smith server? Also, GA which file must these changes be made in, and where in the file? Sorry to GA sound ingnorant . . . but I am, in this case anyway. You're right about it already being installed in E-smith. As far as where to type them, actually, you can type the commands GA in a root shell. Once you are sure they work like you want (you can erase GA your changes with 'ipmasqadm portfw -f'), then you put the commands into GA a script that is run at startup. To do this, you might research Basic Unix administration, or GA init, GA or the /etc/rc.d/... structure. But the easiest way is to just add GA the commands to the end of /etc/rc.d/rc.local (which is the last part GA to GA be exec'ed during startup). EXTIP=123.4.5.6 INTIP=10.0.0.65 ipmasqadm portfw -a -P tcp -L $EXTIP 80 -R $INTIP 80 HTH, -Dan Garret Acott - Original Message - From: Dan B [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, February 28, 2001 2:11 AM Subject: Re: [e-smith-devinfo] Additional Webserver behind gateway At 03:55 PM 2/28/2001 +1000, David Boccabella wrote: I've got a specific requirement. I've a small local network of machines to which I'll be adding GA an e-smith gateway/server (downloading ISO for 4.1.1 now) One of my local machines is a advanced web surver running GA Win2000 GA
Re[2]: [e-smith-devinfo] Announce: e-smith-phpmyadmin-0.2-2
Bonjour [EMAIL PROTECTED], ftp://ftp.e-smith.org/pub/e-smith/contrib/FranBoon/RPMS/noarch/e-smith-phpmyadmin-0.1-1.noarch.rpm That's the only one there :) mercredi 14 mars 2001, 10:44:40, vous avez écrit: afec It's not there. afec ftp://ftp.e-smith.org/pub/e-smith/contrib/FranBoon/RPMS/noarch/e-smith-phpmy admin-0.2-2.noarch.rpm PS Any probs - give me a shout... -- Cordialement, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org Linux, il y a moins bien, mais c'est plus cher !
ISDN e-smith ...
Hello [EMAIL PROTECTED], Can somebody tell me if the HFC PCI-Bus cards was included in the kernel used by e-smith ?? I know it is in kernel 2.4.1-0.1.9.i686 (from RedHat 7.1beta), can I update my e-smith box with it without any danger ? thanks all again ... -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org
Help needed for ISDN
Hello [EMAIL PROTECTED], I've tried without success Paul Nesbit's howto isdn4es (things don't correspond like /etc/conf.modules I've got /etc/modules.conf !) I've got a Gazel PCI 128 internal card (hisax type=35) So I switch to an external modem (still ISDN) on ttyS0, and this is what I get : Mar 30 16:29:52 e-smith diald[511]: Calling site 0.0.0.0 Mar 30 16:29:53 e-smith chat[1321]: abort on (BUSY) Mar 30 16:29:53 e-smith chat[1321]: abort on (ERROR) Mar 30 16:29:53 e-smith chat[1321]: abort on (NO CARRIER) Mar 30 16:29:53 e-smith chat[1321]: abort on (NO DIALTONE) Mar 30 16:29:53 e-smith chat[1321]: abort on (Invalid Login) Mar 30 16:29:53 e-smith chat[1321]: abort on (Login incorrect) Mar 30 16:29:53 e-smith chat[1321]: report (CONNECT) Mar 30 16:29:53 e-smith chat[1321]: send (ATZ^M) Mar 30 16:29:53 e-smith chat[1321]: expect (OK) Mar 30 16:29:53 e-smith chat[1321]: ATZ^M^M Mar 30 16:29:53 e-smith chat[1321]: OK Mar 30 16:29:53 e-smith chat[1321]: -- got it Mar 30 16:29:53 e-smith chat[1321]: send (ATM0L0^M) Mar 30 16:29:53 e-smith chat[1321]: expect (OK) Mar 30 16:29:53 e-smith chat[1321]: ^M Mar 30 16:29:53 e-smith chat[1321]: ATM0L0^M^M Mar 30 16:29:53 e-smith chat[1321]: OK Mar 30 16:29:53 e-smith chat[1321]: -- got it Mar 30 16:29:53 e-smith chat[1321]: send (ATDT360200^M) Mar 30 16:29:53 e-smith chat[1321]: expect (CONNECT) Mar 30 16:29:53 e-smith chat[1321]: ^M Mar 30 16:29:55 e-smith chat[1321]: ATDT360200^M^M Mar 30 16:29:55 e-smith chat[1321]: CONNECT Mar 30 16:29:55 e-smith chat[1321]: -- got it Mar 30 16:29:55 e-smith diald[511]: connector: chat: Mar 30 16:29:55 CONNECT 64000/HDLC Mar 30 16:29:55 e-smith diald[511]: Connected to site 0.0.0.0 Mar 30 16:29:55 e-smith diald[1322]: Running pppd: /usr/sbin/pppd -defaultroute -detach modem crtscts mtu 1500 mru 1500 name auclairdupont noauth noipdefault ipparam diald Mar 30 16:29:55 e-smith pppd[1322]: pppd 2.4.0 started by root, uid 0 Mar 30 16:29:55 e-smith diald[511]: Running pppd (pid = 1322). Mar 30 16:29:55 e-smith pppd[1322]: Using interface ppp0 Mar 30 16:29:55 e-smith pppd[1322]: Connect: ppp0 -- /dev/ttyS0 Mar 30 16:29:55 e-smith pppd[1322]: Hangup (SIGHUP) Mar 30 16:29:55 e-smith pppd[1322]: Modem hangup Mar 30 16:29:55 e-smith pppd[1322]: Connection terminated. Mar 30 16:29:55 e-smith pppd[1322]: Exit. Mar 30 16:29:55 e-smith diald[511]: start sl0: SIOCSIFMTU: Invalid argument Mar 30 16:29:55 e-smith diald[511]: stop ppp0: RTNETLINK answers: No such process Mar 30 16:29:55 e-smith diald[511]: stop ppp0: SIOCSIFFLAGS: No such device or address Mar 30 16:29:57 e-smith diald[511]: Delaying 10 seconds before clear to dial. If someone can show me the way to sort it out ... That would be great PS : I would prefer to use the internal card :) -- Best regards, Bertrand [EMAIL PROTECTED] http://www.linux-nc.org
