[Dspace-tech] Event notification : Repository Fringe 2010: 2/3 September
Apologies for cross-posting Repository Fringe 2010: 2/3 September http://www.repositoryfringe.org/ #rfringe10 Registration is now open! Enjoying two successful years, Repository Fringe is back for the third time... and this year we have moved to the end of the Edinburgh Festival, and to the National eScience Centre. Always innovative, and always looking forward, this year we are looking at the OPEN: Open Data; Open Access; Open Learning; Open Knowledge; Open Content; etc... The programme for the event is, as ever, created by the participants, however there will be a focus on group discussion rather than long talks. Pecha Kucha will make an appearance again, as will the round-table discussions... and we will be hosting a Great Debate on the Thursday Evening (with wine nibbles.) We are looking for submissions from managers, librarians, coders, educators blue-sky thinkers; we are looking for Pecha Kucha talks round-table discussion ideas and one of them we'll take on for the Great Debate. We are also delighted to be able to offer space on Wednesday the 1st September for anyone who wishes to host a meeting or workshop at that time. Robin Taylor Main Library University of Edinburgh Tel. 0131 6513808 -- The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] Problem Upgrading 1.6.1 to 1.6.2
Hi all, I detect my fail and I correct it. But now I have a new problem: I can´t run handle server in dspace 1.6.2!. When I put on shell: ./start-handle-server it showw Command not found: dsrun Command not found: dsrun :S Somebody knows this problem??? thanks Hi, The bin directory only has buildpath.bat dspace-info.pl, dspace.bat and dsrun.bat. For installation y did mvn -U clean package and ant -Dconfig=[dspace]/config/dspace.cfg update. Did you know what I do wrong? thanks! You should have all of these files: http://scm.dspace.org/svn/repo/dspace/tags/dspace-1.6.2/dspace/bin/ Its likely that there is only a difference of 4 files between 1.6.1 and 1.6.2 in the bin dir, but double check that your [dspace-source]/dspace/bin has all of these many files. On Jun 17, 2010 7:17 PM, Juan Antonio Chaves Naranjo jacha...@uma.es wrote: Hello all! I´m upgrading my dspace to 1.6.2 to correct the handle server problem. After the procces there are in the bin directory only 4 files (dsrun.bat, dspace.bat and others but I´m using linux!). Why? In the compiling process there aren´t any errors Thanks -- Juan Antonio Chaves Naranjo jacha...@uma.es -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech -- -- -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] Problem Upgrading 1.6.1 to 1.6.2
On Tue, Jun 22, 2010 at 10:41, Juan Antonio Chaves Naranjo jacha...@uma.es wrote: I detect my fail and I correct it. But now I have a new problem: I can´t What was the problem and how did you solve it? It may help other who will find this in the archive. run handle server in dspace 1.6.2!. When I put on shell: ./start-handle-server it showw Command not found: dsrun Command not found: dsrun :S If the dsrun executable is not really missing, you probably don't have your [dspace]/bin directory in path. That's where the dsrun command is. Try adding it to your PATH environment variable. Regards, ~~helix84 -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] How to Check Duplicate Documents or Reports
Hello Everyone, We have installed DSpace 1.4.2 under RHEL and running fine. I would like to know, whether any option exist to check for duplicate documents or reports (based on filename or any other parameter) while posting it to the repository or any collection. Thanks in advance with regards Ramadass.L Phone:2508 3514/2 -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] How to set authorizations for all items under a top-level community?
I had added some communites and bitstreams to my dspace. After that, I created some groups and assigned authorizations to the top-level communities, so that they can be accessed only by certain groups. But now my problem is that these authorization do not reflect on the subcommunities, collections and bitsreams under these top-level communities. Is there a way to do that, or do I have to set it manually for each and every item? There is a lot of data and editing each one of them is not really possible :( Thanks in advance -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] unable to create accounts
Hi, I am unable to create accounts in Dspace. It gives java error. Any idea about it? Regards, P Save a tree. Don't print this e-mail unless it's necessary. [cid:image003.jpg@01CB122A.F8A88070] This e-mail may contain information that is privileged or confidential. If you are not the intended recipient, please delete the e-mail and any attachments and notify us immediately. inline: image003.jpg-- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] Error in Creating Accounts
Hello Mr. Javed, Can you please explain a bit more regarding error ? Please check logs at /dspace/log/dspace.log for the cause of error Thanks Regards Hardik Mishra Software Engineer Give a man a fish, and you feed him for a day. Teach a man to catch fish and you feed him for a lifetime. Message: 3 Date: Tue, 22 Jun 2010 16:50:07 +0500 From: javed.hirani javed.hir...@aku.edu Subject: [Dspace-tech] unable to create accounts To: 'DSpace-tech@lists.sourceforge.net' DSpace-tech@lists.sourceforge.net Message-ID: aecc45fb0016d74baa5022601cab948c0146d9b6c...@iedexch.ied.aku.edu Content-Type: text/plain; charset=us-ascii Hi, I am unable to create accounts in Dspace. It gives java error. Any idea about it? Regards, P Save a tree. Don't print this e-mail unless it's necessary. [cid:image003.jpg@01CB122A. F8A88070] -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] unable to create accounts
On Tue, Jun 22, 2010 at 13:50, heli...@centrum.sk wrote: I am unable to create accounts in Dspace. It gives java error. Any idea about it? Please, provide details otherwise nobody will know how to help you. Send the error message and steps to reproduce it. Regards, ~~helix84 -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] FW: DSpace: Internal Server Error
Greg, I think that this error message means that Java can't find an IP address for the host named dspace-Production. This may be a problem with the network configuration on the machine. Is this a Linux machine? If so, what name comes up when you use the hostname command? Is there an entry for that name in the /etc/hosts file? What about an entry for dspace-Production? - Hello, I am no longer getting any HELO command errors in the error log when clicking the feedback link or trying to register a new user. The following is the error message. Any hints as what to look for would be greatly appreciated. Thank you. RHEL 5 dspace 1.5.1 tomcat postgresql I can telnet to the smtp server using port 25 so I don't think it is any type of network or firewall error. Greg Exception: java.net.UnknownHostException: dSpace-Production: dSpace-Production at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.dspace.app.webui.servlet.FeedbackServlet.doDSGet(FeedbackServlet.jav a:87) at org.dspace.app.webui.servlet.DSpaceServlet.processRequest(DSpaceServlet. java:151) at org.dspace.app.webui.servlet.DSpaceServlet.doGet(DSpaceServlet.java:99) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Applica tionFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilt erChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValv e.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValv e.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java :128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java :102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve. java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:2 93) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:84 9) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process( Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) This email message and any files transmitted with it are intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law.� Any use, distribution, copying or disclosure by anyone other than the intended individual or entity is prohibited without prior approval.� If you have received this information in error, please notify the sender immediately. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] Dspace - Missing fields
Hi Augustine, It looks like you forgot to select the option on the first page of the submission process which says: The item has been published or publicly distributed before That first page of options are there by default so that DSpace can attempt to narrow down which fields you actually need to fill out. If you leave the above option unchecked, then you will not see the publication date / publisher fields. However, if you go back and select it, those fields will automatically appear. I hope that helps, - Tim On 6/22/2010 4:15 AM, augustine.gitonga wrote: Colleagues, While describing a resource by inputting metadata, among the fields allowed, I do not see fields for date of publication, place of publication and publishers (see attachment below). Where is this supposed to be? Metadata fields missing? Let me know Thanks a lot … /Augustine Gitonga (Mr.) Librarian, Aga Khan University Hospital, Nairobi Tel. +254-20-3662039/3747483 Email: augustine.gito...@aku.edu/ *Please consider the environment before printing this e-mail*// -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] FW: DSpace: Internal Server Error
Greg, I'm not sure about whether or not you'd need to do anything after changing the hosts file. I think I remember a system administrator having to restart something called nscd after making this sort of change, but it's not even running on the system I'm looking at now. On that machine, I see the external IP address specified in the hosts file. There's also a host.conf file with this in it: order hosts,bind I think that makes sure that the hosts file is actually used, instead of skipping directly to the name server. Your system might also have a file /etc/nsswitch.conf file with a line like this: hosts: files nisplus nis dns You'd just want to make sure that files shows up first on that line. This is an odd problem. I don't know much about system administration so maybe someone else can chime in, or maybe there's someone in your network group who might have an idea? - Keith, Thanks for the reply. Yes it is a Linux machine, and I also thought it was an issue with the hosts file which did make reference to dSpace-Production. Running hostname returns dSpace-Production. Do I need to specify the local or external ip? And does changing the hosts file require a reboot (or anything else) for changes to take place. I appreciate your time. Greg -Original Message- From: keith.gilbert...@library.gatech.edu [mailto:keith.gilbert...@library.gatech.edu] Sent: Tuesday, June 22, 2010 9:32 AM To: Heh, Gregory Cc: DSpace-tech@lists.sourceforge.net Subject: Re: [Dspace-tech] FW: DSpace: Internal Server Error Greg, I think that this error message means that Java can't find an IP address for the host named dspace-Production. This may be a problem with the network configuration on the machine. Is this a Linux machine? If so, what name comes up when you use the hostname command? Is there an entry for that name in the /etc/hosts file? What about an entry for dspace-Production? - Hello, I am no longer getting any HELO command errors in the error log when clicking the feedback link or trying to register a new user. The following is the error message. Any hints as what to look for would be greatly appreciated. Thank you. RHEL 5 dspace 1.5.1 tomcat postgresql I can telnet to the smtp server using port 25 so I don't think it is any type of network or firewall error. Greg Exception: java.net.UnknownHostException: dSpace-Production: dSpace-Production at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.dspace.app.webui.servlet.FeedbackServlet.doDSGet(FeedbackServlet.jav a:87) at org.dspace.app.webui.servlet.DSpaceServlet.processRequest(DSpaceServlet. java:151) at org.dspace.app.webui.servlet.DSpaceServlet.doGet(DSpaceServlet.java:99) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Applica tionFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilt erChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValv e.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValv e.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java :128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java :102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve. java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:2 93) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:84 9) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process( Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) This email message and any files transmitted with it are intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law.� Any use, distribution, copying or disclosure by anyone other than the intended individual or entity is prohibited without prior approval.� If you have received this information in error, please notify the sender immediately. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech This email message and any files
Re: [Dspace-tech] FW: DSpace: Internal Server Error
I actually got it working. I needed to make some changes to the hosts file then run /etc/rc.d/init.d/network restart for the changes to take effect. My hosts file was all messed up so doing a little online research got to me to a solution. Thanks again for your time. Greg -Original Message- From: keith.gilbert...@library.gatech.edu [mailto:keith.gilbert...@library.gatech.edu] Sent: Tuesday, June 22, 2010 10:10 AM To: Heh, Gregory Cc: DSpace-tech@lists.sourceforge.net Subject: Re: [Dspace-tech] FW: DSpace: Internal Server Error Greg, I'm not sure about whether or not you'd need to do anything after changing the hosts file. I think I remember a system administrator having to restart something called nscd after making this sort of change, but it's not even running on the system I'm looking at now. On that machine, I see the external IP address specified in the hosts file. There's also a host.conf file with this in it: order hosts,bind I think that makes sure that the hosts file is actually used, instead of skipping directly to the name server. Your system might also have a file /etc/nsswitch.conf file with a line like this: hosts: files nisplus nis dns You'd just want to make sure that files shows up first on that line. This is an odd problem. I don't know much about system administration so maybe someone else can chime in, or maybe there's someone in your network group who might have an idea? - Keith, Thanks for the reply. Yes it is a Linux machine, and I also thought it was an issue with the hosts file which did make reference to dSpace-Production. Running hostname returns dSpace-Production. Do I need to specify the local or external ip? And does changing the hosts file require a reboot (or anything else) for changes to take place. I appreciate your time. Greg -Original Message- From: keith.gilbert...@library.gatech.edu [mailto:keith.gilbert...@library.gatech.edu] Sent: Tuesday, June 22, 2010 9:32 AM To: Heh, Gregory Cc: DSpace-tech@lists.sourceforge.net Subject: Re: [Dspace-tech] FW: DSpace: Internal Server Error Greg, I think that this error message means that Java can't find an IP address for the host named dspace-Production. This may be a problem with the network configuration on the machine. Is this a Linux machine? If so, what name comes up when you use the hostname command? Is there an entry for that name in the /etc/hosts file? What about an entry for dspace-Production? - Hello, I am no longer getting any HELO command errors in the error log when clicking the feedback link or trying to register a new user. The following is the error message. Any hints as what to look for would be greatly appreciated. Thank you. RHEL 5 dspace 1.5.1 tomcat postgresql I can telnet to the smtp server using port 25 so I don't think it is any type of network or firewall error. Greg Exception: java.net.UnknownHostException: dSpace-Production: dSpace-Production at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.dspace.app.webui.servlet.FeedbackServlet.doDSGet(FeedbackServlet.jav a:87) at org.dspace.app.webui.servlet.DSpaceServlet.processRequest(DSpaceServlet. java:151) at org.dspace.app.webui.servlet.DSpaceServlet.doGet(DSpaceServlet.java:99) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Applica tionFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilt erChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValv e.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValv e.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java :128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java :102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve. java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:2 93) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:84 9) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process( Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) This email message and any files transmitted with it are intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law.� Any use, distribution, copying or disclosure by anyone other than the intended individual or entity is prohibited without prior approval.� If you have received this
Re: [Dspace-tech] How to Check Duplicate Documents or Reports
Hello Mr. Ramadass, although this functionality doesn't exist in the open source domain (at least not to my knowledge), @mire offers duplicate detection functionality as part of our Metadata Quality Module. It contains an internal similarity algorithm, that can be configured to some extend (defining which metadata fields have to be taken into account to identify a duplicate match). As an administrator, you can choose to scan your whole repository, or certain collections for duplicates. After the module identified these duplicates, it offers an interface to merge records. As a result, one item remains while the other handles become referrals to the merged item. (so your links don't break). Additional information and demonstration movies are available here: http://atmire.com/quality.php We do have a version of this module for 1.4.2 JSPUI, but please note that the movies were made on a 1.5 XMLUI DSpace, and there are differences in the user interface. The XMLUI version of the module also integrates with the submission workflow, e.g. users get alerted after filling in a page of metadata fields, whether their data closely resembles existing items. The module is also integrated in our test repository, @mire labshttp://atmire.com/labs, for which you can get a (free) evaluation admin account. kindest regards, Bram Luyten @mire - http://www.atmire.com Technologielaan 9 - 3001 Heverlee - Belgium 533 2nd Street - Encinitas, CA 92024 - USA http://www.togather.eu - Before getting together, get t...@ther On Tue, Jun 22, 2010 at 12:10 PM, Ramadass L l...@isac.gov.in wrote: Hello Everyone, We have installed DSpace 1.4.2 under RHEL and running fine. I would like to know, whether any option exist to check for duplicate documents or reports (based on filename or any other parameter) while posting it to the repository or any collection. Thanks in advance with regards Ramadass.L Phone:2508 3514/2 -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] handle server errors
RHEL 5 dspace 1.5.1 tomcat postgresql I am having issues with the following errors when starting the handle server. I've already made sure the there is only one instance of the handle server running by issuing the command: ps -ef | grep handle I have seen that it could be caused by either port 8000 or 2641 not being dedicated. How would I determine if this is the case? If this is not the cause for the error, I would appreciate any feedback. Thanks. Saving global values to: /root/.handle/root_info 2010/06/22 12:06:40 EDT 50 unspecified max_handlers count, using default: 200 2010/06/22 12:06:40 EDT 50 unspecified max_handlers count, using default: 200 2010/06/22 12:06:40 EDT 50 unspecified max_handlers count, using default: 200 2010/06/22 12:06:40 EDT 100 class net.handle.server.HdlHttpInterface: Error setting up server socket: java.net.BindException: Address already in use 2010/06/22 12:06:40 EDT 100 class net.handle.server.HdlHttpInterface: Error setting up server socket: java.net.BindException: Address already in use Greg This email message and any files transmitted with it are intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. Any use, distribution, copying or disclosure by anyone other than the intended individual or entity is prohibited without prior approval. If you have received this information in error, please notify the sender immediately. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] DSpace 1.5.2 with Shibboleth Authentication and auto-registration problem
Hi everyone, I've a DSpace 1.5.2 installed with Shibboleth authentication. The problem is that users who are auto-registered don't have a first name assigned. I can see the attributes released by the IdP, in my browser session, and the first name is present. The same occur in DSpace, in ShibbolethServlet (it lists all the attributes sent by the IdP in the log file) and the first name is present. And the name of the attribute that is configured in dspace.cfg for the first-name is present in the previous list. But in the profile page the first name doesn't appear. Someone experiencing the same problem? -- Cumprimentos, Hélder Silva KEEP SOLUTIONS, LDA. Departamento de Informática Universidade do Minho 4710-057 Gualtar, Braga, Portugal W www.keep.pt E i...@keep.pt T +351 253604461 F +351 253604471 -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] Changes in messages.xml not showing up consistently
I'm hoping someone can help me with this problem. I've made some changes to
my dspace.cfg file to include an index for dc.identifier.citation. It is
listed in dspace.cfg as:
*webui.browse.index.6 = identifier:metadata:dc.identifier.citation:text*
I've also made changes to my messages.xml file so that this index will
appear as an option to users. I've added:
*message
key=xmlui.ArtifactBrowser.AdvancedSearch.type_identifierBluebook
Citation/message*
* *
*message
key=xmlui.ArtifactBrowser.ConfigurableBrowse.title.metadata.identifierBrowsing
{0} by Citation {1}/message
message
key=xmlui.ArtifactBrowser.ConfigurableBrowse.trail.metadata.identifierBrowsing
{0} by Citation/message*
*message key=xmlui.ArtifactBrowser.Navigation.browse_identifierBy
Bluebook Citation/message*
Now, I've noticed that the changes are visible in some collections, but not
in others. What is causing that? I've updated the indexes and restarted
the server but I still see the changes only in some places, but not others.
Does anyone have any idea what I'm doing wrong?
I'm running Dspace from a Jumpbox installation so I don't know if I can do a
complete rebuild. If I can, however, can someone point me to directions to
do that?
Here's my Dspace implementation: http://lawarchives.scu.edu
Also, I'm a law librarian, not an IT person, so if everyone could keep it
simple that would be most appreciated. ;)
Thank you SO much. I'm hoping to use this for student law journal
cite-checking assignments. If it works well, I'm sure other law schools
will consider it. I've already gotten interest from other law librarians
about setting up Dspace for their law journals.
Thanks again,
David Holt
Santa Clara University - School of Law
Santa Clara, CA
--
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo___
DSpace-tech mailing list
DSpace-tech@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dspace-tech
[Dspace-tech] Fwd: Lucene search indexes
I sent the email some weeks ago with no response. Am I to take it that no one is able to help me? John -- Forwarded message -- From: John Preston byhisde...@gmail.com Date: Wed, Jun 9, 2010 at 5:50 PM Subject: Lucene search indexes To: dspace-tech@lists.sourceforge.net Hi, I am using DSpace 1.6 and am trying to create some specific indexes and use them via the query box. So for example I define an index in the dspace.cfg file as : search.index.13 = indexname:dc.element.qualifier where dc.element.qualifier is replaced by my metadata field name. Now in the query string I can refer to this index by the syntax: indexname: This works OK when the metadata field containes strings. However I need some to be integers and floating point values, so I can refer to them in range statements such as: indexname:[1.3 TO 5.6] When I put floating point values in the metada fields and try the lucene range statement query syntax it gives unexpected results. it finds the items sometimes when the value is outside the range and sometimes when it is inside the range depending on what the range values are. Now I saw in the codebase that the search.index.n syntax allows a type entry such that the following sahould create a floating point index field: search.index.13 = indexname:dc.element.qualifier:float However this does not work as expected as the range statement does not return the correct items as per range values. Can anyone say what I am doing wrong, or not understanding. John -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
Re: [Dspace-tech] Fwd: Lucene search indexes
Hi John, Sorry for the drought in responses. I'm not an expert in this section of the code, but it looks like the predefined types (for the indexer) are: - text (default) - timestamp - date http://fisheye3.atlassian.com/browse/dspace/dspace/branches/dspace-1_6_x/dspace-api/src/main/java/org/dspace/search/DSIndexer.java?r=HEAD#l971 So its definitely ignoring your name:name-space:type of integer or float. I'm not sure what the solution to this is. I was wondering if a condition could be added for when (type = integer) or (type = float), but I'm not sure what you would need to do in the code to get it to work well with numeric info. Peter Dietz Systems Developer/Engineer Ohio State University Libraries On Tue, Jun 22, 2010 at 4:35 PM, John Preston byhisde...@gmail.com wrote: I sent the email some weeks ago with no response. Am I to take it that no one is able to help me? John -- Forwarded message -- From: John Preston byhisde...@gmail.com Date: Wed, Jun 9, 2010 at 5:50 PM Subject: Lucene search indexes To: dspace-tech@lists.sourceforge.net Hi, I am using DSpace 1.6 and am trying to create some specific indexes and use them via the query box. So for example I define an index in the dspace.cfg file as : search.index.13 = indexname:dc.element.qualifier where dc.element.qualifier is replaced by my metadata field name. Now in the query string I can refer to this index by the syntax: indexname: This works OK when the metadata field containes strings. However I need some to be integers and floating point values, so I can refer to them in range statements such as: indexname:[1.3 TO 5.6] When I put floating point values in the metada fields and try the lucene range statement query syntax it gives unexpected results. it finds the items sometimes when the value is outside the range and sometimes when it is inside the range depending on what the range values are. Now I saw in the codebase that the search.index.n syntax allows a type entry such that the following sahould create a floating point index field: search.index.13 = indexname:dc.element.qualifier:float However this does not work as expected as the range statement does not return the correct items as per range values. Can anyone say what I am doing wrong, or not understanding. John -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech
